May 28, 2014 - Farsens releases RMETER, a passive RFID tag that measures the resistance value of the device connected to it with a 10Ohm to 10MOhm range RMETER is a battery free RFID sensor tag capable of transmitting a unique identifier and the associated resistance measurement data to a commercial EPC C1G2 reader without the need of a battery on the sensor tag. This device can measure resistances in a range from 100‚Ѷ to 500K‚Ѷ with an accuracy of ±3%. It also offers an extended operation range from 10‚Ѷ to 10M‚Ѷ with an accuracy of ±7%. The RMETER has a 96 bits EPC number, a 32 bit TID and a password protected Kill command. The tag comes in a variety of antenna designs and sizes to adapt the performance to the required application in the 860-960 MHz band.
The reading distance for the battery-free thermistor tag is around 1.5 meters (5 feet) and it can be embedded in a wide variety of materials such as plastics or concrete. It can also be encapsulated in an IP67 or IP68 casing for usage in harsh environments. Evaluation kits are available. The RMETER can be used without batteries at all, allowing for a wide range of opportunities monitoring resistance in applications where the accessibility is restricted, or where the use of batteries is not recommended.
Since batteries are not needed, the sensor tags will never have to worry about autonomy. RMETER tags offer R&D teams the opportunity of using proprietary resistance based sensors in battery-free mode. The RMETER provides battery-free and wireless communication means to those companies looking for this kind of solution. Typical resistance based sensors include thermistors, Light Dependent Resistors (LDRs), soil moisture sensors or strain gages amongst others.
