©2026 Automation.com, a subsidiary of the International Society of Automation.
-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Author Profile
Gregory K. McMillan
271 Results Found
-
Feature
How to Check out DCS I/O at the Panel Shop
An I/O checkout on a DCS system is rather difficult because there is no means to “force” the I/O as you can most PLCs -
FeatureWhat Are the Factors that Affect VFD Rangeability?
What are the factors that affect VFD rangeability? -
FeatureHow to Create a P&ID
P&IDs should generally follow ISA symbols for the basic instruments. If you follow that symbology, most anyone can read and understand the P&IDs quickly. -
Feature
What Are the Important Criteria for Selecting a System Integrator for an Industrial Project?
Choosing an integrator for an industrial automation project is like choosing an architect for the house of your dreams – you can get almost any architect to build a dwelling structure, but the house o -
Feature
How to Select a System Integrator for an Industrial Automation Project
Look for an industrial systems integrator that can add value…not one that just does what you tell them. A good integrator will ask lots of questions so they fully understand your process. -
FeatureAnnubar or Orifice Flowmeter: What Is the Best Application for an Oil Storage Tank?
The permanent pressure loss is less for an annubar than an orifice flowmeter. -
FeatureWhat Is the Proper Back Pressure Control Valve Type?
To minimize interaction between a back pressure loop and a flow loop in series, the pressure drop should be much greater across the flow control valve. -
FeatureWhat Are Best Practices for Sizing a Pump Recycle Valve?
Recycle valves are used to maintain limited flow through a pump to avoid cavitation under dead-head or low flow conditions. -
Feature
How Do You Handle Manual Operations in Industrial Process Control?
With a requirement for manual action, slow down transitions in manual operations by use of velocity limits on the setpoints of PID and analog output blocks.