©2026 Automation.com, a subsidiary of the International Society of Automation.
-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Author Profile
Joel Don
345 Results Found
-
FeatureAutoQuiz: Why Must Voltage Be Reduced Along with Frequency in a Variable Frequency Speed Controller?
To maintain a constant (rated) flux density, the applied voltage must also be changed in the same proportion as the frequency (per Faraday’s law). -
FeatureAutoQuiz: What Process Confirms That a Company Meets the Needs of Customers and Complies With Statutory and Regulatory Requirements?
ISO 9000 is a family of international quality management systems standards designed to help organizations ensure that they meet the needs of customers and other stakeholders while meeting statutory an -
Feature
AutoQuiz: What is “Slip” in an AC Induction Motor?
Slip is usually expressed as a percentage, and varies by motor, from nominally 0.5 percent for very large motors to about 5 percent for small, specialized motors.. -
Feature
AutoQuiz: What Factors Affect the Reynolds Number for a Flowing Fluid?
The Reynolds Number for a flowing fluid can be generalized as the ratio of kinetic (or inertial) forces divided by viscous forces. -
FeatureAutoQuiz: Identify Three Levels Within the Manufacturing Computer Systems Hierarchy
The manufacturing computer systems hierarchy is defined in ISA-88 and ISA-95 by Level 0 through Level 4. -
FeatureAutoQuiz: What Are the Limitations of an Analog Multimeter?
An analog voltmeter works by passing a current through a coil that is suspended between two permanent magnets. -
FeatureAutoQuiz: How Are the Maintainability and Maintenance of Automation Systems Related?
Maintainability is the probability that a device will be restored to an operating condition within a specified period when maintenance is done with prescribed resources and procedures. -
FeatureAutoQuiz: How to Use the Parity System to Detect Data Transmission Errors
Parity is a simple method using a binary code (“1” or “0”) to detect data transmission errors by making the sum of the “1” bits in the source data either an odd or an even number. -
FeatureAutoQuiz: What Electrical Event Can Occur With a 24 VDC Open-Collector Output Sinking Configuration?
An NPN (sinking) open-collector, when “energized,” switches the load side of the relay (at terminal “A”) to ground (terminal “B”). -
FeatureAutoQuiz: What Device Is Used to Convert an Analog Signal From a Transmitter to the Signal Required by a Digital Controller?
A digital controller requires a digital signal as its input. A 4-20 mA transmitter outputs an analog signal. Therefore, a device to convert an analog (A) signal to a digital (D) is required. -
FeatureAutoQuiz: What Are the NPV and IRR Methods for Evaluating Industrial Automation System Capital Investments?
Net present value (NPV) by itself is not a good indicator of the viability of a project or a good differentiator between two competing projects. -
Feature
AutoQuiz: What Is the Logical Analysis Troubleshooting Method for an Industrial Process?
Once a problem is identified in an industrial process, data must be gathered and analyzed to determine a viable set of potential actions and solutions. -
Feature
AutoQuiz: What Should an Engineer Include in a Final Automation Project Report to Senior Management?
An executive summary and bullet-item lists for an automation project allows managers them to understand the basic outcomes and conclusions of your project. -
FeatureAutoQuiz: What Is the Purpose of an Instrument Location Plan?
Instrument location plans are most often used to support new plant installations and give the installer information about the actual physical location of the installation of an instrument. -
FeatureAutoQuiz: What Is the Significance of the Fieldbus Intrinsic Safety Concept?
The fieldbus intrinsic safety concept simplifies the rules governing energy storage in field cables and makes more power available to the fieldbus trunk. -
Feature
AutoQuiz: Which Valve Actuation Method Is Best for a Very Large Force and a Small Actuator?
Hydraulic actuators are driven by a high-pressure fluid (up to 4,000 psig) that can be delivered to the actuator by a pump that is remote from the actuator itself. -
Feature
AutoQuiz: What Are the Benefits of Self-Study Workbooks for Operator Training?
Self-study workbooks ensure that all students have been exposed to the same learning objectives and material. -
Feature
AutoQuiz: How are Pressure Changes Measured in Industrial Applications?
For most pressure applications, changes in pressure are detected by the change in deflection of a measuring diaphragm. -
FeatureAutoQuiz: What Are the Cybersecurity Risks to a Geothermal Plant?
Automation systems are vulnerable to many cybersecurity risks, but email viruses pose the least risk to disrupt operations and create an emergency situation. -
FeatureAutoQuiz: Technical Characteristics of the Open Systems Interconnection Model
The presentation layer for protocols used in control systems provides the translation of data received into a usable format, such as binary data from a programmable logic controller into floating poin -
FeatureAutoQuiz: How to Install Thermocouple Extension Wires
Proper installation of thermocouple extension wires requires special terminal blocks to prevent additional junctions from being formed. -
FeatureAutoQuiz: How Are Errors Corrected in Industrial Network Data Communications?
Cyclic redundancy checking is a method of checking for errors in data that has been transmitted on a communications link. -
FeatureLessons Learned From a Forensic Analysis of the Ukrainian Power Grid Cyberattack
The Ukrainian power grid cyberattack was triggered when an employee opened an Excel spreadsheet attachment of an email. -
FeatureAutoQuiz: How to Calibrate a High-Range Electronic Pressure Transmitter
A dead-weight tester apparatus uses known traceable weights to apply pressure to a fluid for checking the accuracy of readings from a pressure gauge or pressure transmitter. -
Feature
AutoQuiz: What Is Receipt Verification in Industrial Processes?
Receipt verification is an industrial systematic process by which a site verifies that what was specified and ordered is actually what is received. -
Feature
AutoQuiz: What Industrial Troubleshooting Technique Can Help Replace a Bad Component?
The substitution method may reveal the component that is the cause of the problem. -
Feature
AutoQuiz: What is a Database Record?
A database record is a single row of information in a table. -
FeatureAutoQuiz: Characteristics of an Industrial Controller
For a direct-acting controller, the resulting output movement is in the same direction as the movement of the process variable. -
FeatureAutoQuiz: When Does Cavitation Occur in Liquid Flow?
In cavitation, when the liquid drops below the vapor pressure around the vena cava, the liquid vaporizes. -
Feature
AutoQuiz: What Happens When a Reset Action Is Added to an Industrial Controller Tuned for a Fast Control Loop?
Both gain and reset (integral action) act upon the error in the same direction, per a simplified proportional, integral, derivative (PID) control algorithm. -
FeatureAutoQuiz: What is the Risk in Using Standard ROI Ratios to Invest in an Automation System?
ROI equations do not account for lost opportunity to collect investment interest on money diverted to fund an automation project or the time value of money. -
FeatureAutoQuiz: How to Calculate Steady State Gain for a Standard Pneumatic Instrument Loop
Gain is defined in industrial control theory as the change in input divided by the change in output. -
Feature
AutoQuiz: What Are Common Terms Used to Quantify Dangerous Industrial Failures?
Spurious trips and nuisance trips are indicative of “safe” failure modes, not “dangerous” failures. -
NewsBook Excerpt + Q&A: Situation Management for Process Control
Situation management is the competency, ability, and willingness of the human operator to properly and successfully manage the enterprise or activity under his or her charge. -
FeatureAutoQuiz: How to Measure the Resistance in a Circuit
Resistance is an electrical quantity that measures how a device or material reduces the electric current flow through it. -
FeatureAutoQuiz: How to Calculate Uptime for an Automation System
The most important measure for production equipment support is operational availability, or “uptime.” -
FeatureAutoQuiz: How to Troubleshoot a System Failure Due to a Bad Component
Troubleshooting is often an iterative process. If the proposed solution is not the correct one, further analysis and data collection are warranted. -
FeatureAutoQuiz: What Is the Purpose of a Markov Model Computation?
Systems that exhibit a Markov property are ones in which the future does not depend on the past. -
NewsBook Excerpt + Q&A: Security PHA Review for Consequence-Based Cybersecurity
In process industries, mechanical safeguards have been replaced with digital devices. Problem: They have created gr3eater risk from cyberattack. -
Feature
AutoQuiz: Characteristics of a Loop Diagram
Instrument loop diagrams are very detailed depictions of an industrial control or process -
Feature
AutoQuiz: Characteristics of a Fuzzy Logic Controller
A PI controller is tuned by adjusting gain or proportional band & integral time settings. Fuzzy logic controller is tuned by adjusting scale factors. -
FeatureAutoQuiz: What Is the Best Method for Measuring the Level of a Highly Corrosive Media?
Ultrasonic level detectors use the principle of reflection of an acoustic wave from liquid to vapor phase and vapor to liquid phase. -
FeatureAutoQuiz: Which Signal Type Indicates Direction and Velocity in a Motion Control Application?
To indicate both direction & velocity, a signal with both positive and negative characteristics is required. Motion controls use either ±10 V or ±5 V signals to accomplish this. -
Feature
AutoQuiz: What Type of Switch Is Designed to Detect the End of Travel of a Valve?
Limit switch is a general term to describe the class of devices that are used to detect the end of travel of a valve, louver, or any other item that may be in motion. -
Feature
AutoQuiz: What Is the Benefit of Industrial RFID Tags Over Barcode Systems?
RFID tags consist of silicon chips and an antenna that can transmit data to a wireless receiver. -
Feature
AutoQuiz: When Should Operating Instructions Be Developed for an Industrial Process?
Operating instructions may be included in a functional specification or operating description and may range from a few pages describing how to operate one part of a plant to a complete set of directio -
FeatureAutoQuiz: Cold Junction Compensation Is Required for Which Type of Temperature Measurement Device?
A thermocouple is comprised of two wires of dissimilar metals, connected at one end, which is placed in the process to be measured. This is called the measuring junction. -
FeatureAutoQuiz: What Security Property Is Affected If a Hacker Intercepts and Changes Set Point Data?
Data integrity implies that the data received is the same (value, format, quality) as the data sent. -
Feature
AutoQuiz: What Is a Schematic Representation of a Complete Hydraulic, Electric, Magnetic, or Pneumatic Circuit Called?
A loop diagram shows complete details of a hydraulic, electric, magnetic, or pneumatic circuit, showing all of the interconnections, components, and devices that participate in that circuit. -
Feature
AutoQuiz: What Is the Fastest "Electronic" Method to Bring a DC Motor to a Full Stop?
In regenerative braking, all of the motor's energy is fed directly back into the AC power line. -
FeatureAutoQuiz: Unique Feature of a Pneumatic Differential Pressure Sensor/Transmitter
In a pneumatic transmitter, the nozzle faces a baffle, so, as the measured pressure increases, the baffle moves toward the nozzle. -
FeatureAutoQuiz: What Is the Definition of Restore Time in Industrial Maintenance?
The restore time includes all activities required to diagnose and repair the device. This includes diagnosing the problem, isolating the device from the system, traveling to the device, and repairing -
Feature
AutoQuiz: What Is the Condition When Controller Output Increases in Conjunction With a Controlled Variable Increase?
As pressure increases (controlled variable), the valve output would increase to open the valve in order to relieve the pressure. -
NewsBook Excerpt + Author Q&A: Fluid Mechanics of Control Valves
ISA's up-to-date work on final control valve elements presents theoretical and practical information in an easy, conversational style, -
Feature
AutoQuiz: How to Program the Correct PLC Equation for a Pressure Transmitter
To scale the analog input, calculate the "% of the raw counts range" that is represented by the analog input, and multiply by the EU100% range, since the EU0% value is 0. -
Feature
AutoQuiz: How to Perform PLC Raw Count Calculations for Pressure Transmitters
A pressure transmitter is connected to the analog input card of a PLC. The 4-20mA input value from the transmitter is converted into equivalent raw counts. -
FeatureAutoQuiz: What Is the Purpose of an Optical Isolation Circuit on a Digital Input Card in a PLC I/O System?
An optical isolation circuit is used to provide a barrier between the field wiring & associated field wiring issues (shorts, ground loops, transients, etc.) -
FeatureAutoQuiz: What Is the Best System for Analyzing Multiple Sources of Data in an Industrial Plant or Facility?
A well-designed, integrated building automation system seamlessly integrates lighting, elevators, boilers, chillers, fire protection, generators, access control, and HVAC control systems, which may al -
Feature
AutoQuiz: How to Convert a Transmitter's Current Output Signal to a Voltage Input Signal
Place a resistor across the input terminals of the controller to convert a transmitter's current output signal. -
Feature
AutoQuiz: What Flow Sensor Naturally Generates a Pulsed Output to Represent Flow Rate?
Turbine meters almost universally use a magnetic pickup to determine the number of rotations of the spinning turbine element. -
FeatureAutoQuiz: What Information Is Typically Included in a Loop Diagram?
Tag numbers, wire numbers and terminal numbers, and indication of the interrelation to other instrumentation loops, are the essential elements of a loop diagram. -
FeatureAutoQuiz: What Is the Purpose of Forward Decoupling?
A forward decoupling algorithm can be used to cancel out MIMO interactions, making more traditional control methods applicable to complex systems. -
Feature
AutoQuiz: What Is the Minimum Course of Action to Take Before Replacing Damaged Wiring?
All circuits to be worked on should be tested with a multi-meter prior to performing work to ensure that no voltage or current is present. -
FeatureAutoQuiz: Which Flow Measurement Device Does Not Require Square Root Extraction?
The output from a magnetic flowmeter is a linear signal that is proportional to the velocity of the flowing fluid. -
FeatureAutoQuiz: What Is the Purpose of a Valve Positioner?
A valve positioner adjusts the pneumatic output to a valve actuator so that the requested position of the valve from a controller is achieved. -
Feature
AutoQuiz: Models of Control to Describe a Batch Process
A process stage in the process model can be mapped to a unit procedure in the procedural model, which in turn is mapped to a unit in the physical model. -
Feature
AutoQuiz: Which Type of Electrical Wires Would Normally Be Shielded in Control Systems?
Cable shield, connected to an isolated zero potential, is required to prevent nearby inductive loads and EMF fields from altering the low-level voltage or current levels in the signal wiring. -
Feature
AutoQuiz: What is Common Mode Noise?
Common noise must be in phase between conductors, or it converts to normal mode or differential noise. -
FeatureAutoQuiz: What Happens When a Controller Receives an Error Signal for Significant Periods of Time?
The integral term of the PID control algorithm increases (or decreases) at a rate inversely proportional to the integral time of the controller. -
FeatureAutoQuiz: What Are the Advantages of Cascade Control?
Cascade control does very little to improve upon control loops that were previously stable. Examples are liquid level and gas pressure control loops. -
FeatureAutoQuiz: Characteristics of a Flowmeter
For a turbine flowmeter, the rotor is supported by the hubs and bearings inside of a flowmeter body, and as the rotor spins, the number of revolutions is determined with a magnetic pickup. -
FeatureAutoQuiz: How to Measure the Temperature Between Two Dissimilar, Joined Metals
A thermocouple contains two different conductors that produce a voltage proportional to a temperature difference between the ends of a pair of conductors. -
Feature
AutoQuiz: How to Measure Fluid Velocity Through a Pipe
The constant between pipes of differing diameters is the flow rate (and other fluid properties) is the same in both pipe lengths. -
FeatureAutoQuiz: Design Specifications for Building Automation Systems
Energy management, access control, lighting control, asset management, communications, life safety, fire alarm, and HVAC controls are all of interest when designing a building automation system -
Feature
AutoQuiz: What Is the Continuous Sequence of Steps Performed by a PLC Processor?
The time it takes for the PLC to complete its scanning of all program steps in one operating cycle is called the scan time.