Lantech IGS-5400-2P is a high performance L2 + managed industrial switch which provides L2 wire speed and advanced security function for network aggregation and backbone deployment. It delivers all Gigabit speed with pro-Ring IIs self-recovery in less than 20ms, ITU G.8032 in 10ms ring recovery, comprehensive QoS, advanced security, PTP v2 precision time protocol for the scalability and resiliency. The highly flexible modular design consisting of maximum 28x Gigabit T,28x Giga PoE at/af, 28xGigabit/100M SFP, 18x100M ST/SC + 4 Gigabit SFP/4 Gigabit T with PTP v2 function covers the widest deployment of applications.
With pro-Ring IIs, Lantech IGS-5400-2P can provide self-heal recovery scheme consisting of Ring and Chain** topologies in less than 20ms. The standard ITU G.8032 ring protection (over vLAN) can work with other metro switches for ring protection in less than 10ms that is faster than market products. It supports MSTP that allows RSTP over Vlan for redundant links.
Lantech IGS-5400-2P model features hardware-based PTP IEEE1588 v2 function which can allow each modules Gigabit, PoE or 100FX to synchronize the network with precise accuracy ( under 1μs). It has RTC(Real Time Clock) inside that can keep track of current time.
Lantech IGS-5400-2P builds all the important management features required in large network like DHCP Option 82 (Relay agent), ACL for security, SSH/SSL, IGMP Proxy, Query / Snooping, advanced QoS and tag VLAN. It also can export the configuration in editable configuration file. The PoE modules support advanced PoE management including PoE detection, delay and scheduling. PoE detection can detect if the connected PD is hang up then restart the PD; PoE delay is to delay power feeding when the switch is completely booted up; PoE scheduling is to allow pre-set power feeding schedule upon routine time table.
Lantech IGS-5400-2P designs with redundant firmware where can survive if the primary firmware is crashed due to improper upgrading. Also, it designs with a factory reset button where user can reset all settings to factory default. The built-in watch dog design can reboot switch automatically when CPU is hang up due to abnormal utilization. IGS-5400-2P can automatically back up the configuration or write the configuration into/from USB dongle without any notebook setup.
The IGS-5400-2P DIDO function can support additional open/close physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the switch was moved or stolen. In case of events, the IGS-5400-2P will immediately send an email to pre-defined addresses as well as SNMP Traps out. It provides 2DO while disconnections of the specific port was detected and relay contact will activate the alarm. 2 DI can integrate the sensors into the auto alarm system and transfer the alarm information to IP network with email and SNMP.
Lantech IGS-5400-2P chassis and modules are designed for easy maintenance and installation; It also supports redundant power supplies (DC12~48V/ isolated 36~75VDC) and (isolated 85~265VAC/100~370VDC) to increase the network reliability. It also supports rear side terminal block for connecting DC 48V PoE power source.
Lantech IGS-5400-2P features high reliability and robustness compliant with IEC-61850-3 & IEEE 1613 withstanding extensive EMI/RFI phenomenon, lighting surge, inductive load switching, high ESD (8000V ESD/ 3000V EFT), high fault current environment usually found in Substation, Steel automation, Mining and Process control etc. Supporting the latest EEE (Efficient Energy Ethernet) standard, IGS-5400-2P can run under widely operational temperature ranging from -40°C~85°C (POE -40°C~75°C) in the harsh and critical environment.
- High-density Gigabit Ethernet L2+ managed (PoE at/af) switch
- Supports pro-Ring IIs for self-heal ring in 20ms; ITU G.8032 < 10ms; MSTP
- Supports PTPv2 (under 1μs) IEEE 1588 and built-in RTC(Real Time Clock)
- Advanced Management with ACL, IGMPv3, QinQ, SSH/SSL,TACAS+,IPv6,OAM
- Supports wide operating temperature range from -40°C to 85°C, EEE(Efficient Energy Ethernet,802.3az)
- Support DI/DO, Reset button, USB configurable dongle
- IEC 61850-3, IEEE1613 ready
