August 4, 2015 - Penko releases 1020-FMD force measuring instrument for automatic or non-automatic applications. It provides a suitable interface between load cells, with an integrated controller to the system for data processing.
1020-FMD measures with high-speed of 1600 conversions/sec and high internal resolution, 24 bit, guarantees a fast and accurate data transfer and/or cut-off. These characteristics allow application of the instruments for static and dynamic force measurement as well as destructive material tests. These applications are supported with zero adjustment, track recording, hold/peak, hold/valley, hold and overload protection.
Type 1020-FMD models are provided with USB to facilitate set-up and back-up functions. Additional models include RS232, RS485/422, Ethernet, CANBUS and Profibus. The range is completed with an analog output, 0/4 – 20/24 mA. Easy and fast calibration is done digitally.
The force is displayed by means of a bright 2.8” TFT screen with 13 mm high figures, plus a color bar.
The panel meter has a front of 150 x 76 mm and a depth of only 82 mm; the stainless steel enclosure size including the swivel bar is 180 mm x 145 mm x 153 mm (W x H x D).