Articles and News

Despite the apparent complexity of machine learning, only a handful of algorithms serve as the basis for all soft sensor models.

Many smart factory and Industry 4.0 use cases and implementations are happening at edge layer nowadays—and for good reason.

With the adoption of a digitalization strategy, PETRONAS has found that cybersecurity must be approached from a more holistic perspective.

In this feature, Sam Dunscombe, Head of Growth at digital BSS provider Mobilise, explores the sunk cost fallacy in relation to digital transformation.

ABB project team and technology will support mine startup and development schedule.

New orders of manufacturing technology totaled $404.2 million in August 2023, according to the latest U.S. Manufacturing Technology Orders Report published by AMT–The Association For Manufacturing Technology.

FCI’s proven thermal dispersion, EPA Quad O compliant, ST80 Series and ST100A Series CH4 Flow Meters offer highly accurate and repeatable gas flow measurement in hazardous areas to assist in compliance with environmental mandates.

Moxa has partnered with an IT consulting company to develop the first CBM system for South Korean Rail System.

Long before Industry 4.0 and cloud-connected architectures became possible, innovators championed PC-based technologies for industrial automation.

Astrodyne TDI, a technology leader in power electronics, power distribution units and EMI filters, is pleased to announce the opening of its new state-of-the-art manufacturing facility in Penang, Malaysia.

The new solutions will deliver smarter, safer, optimized and sustainable industrial operations.

The companies will leverage imaging technology synergies to target AI-powered machine vision in Industry 4.0 environments.

The new location is the company’s fourth manufacturing facility, expanding its production and partnership opportunities with key customers in the Asia-Pacific region.

The planar smart conveyance technology market is in the earliest stages of growth but will be worth $100 million by 2027.

The most common factors that can cause a manifold to fail are manifold total usage age, older design, lower EV cycles, low flow and pressure derived from the manifold.

Dacke Industri acquired the majority of MecVel Srl shares.

With more than 4 million manufacturing positions predicted to be available in the next ten years, the new resources from the STEM Careers Coalition connect today’s students to the manufacturing careers of tomorrow.

“We’re thrilled to exhibit at The Assembly Show, which allows us to get the pulse on industry trends, engage with other industry leaders, and spotlight our motion innovations for demanding industrial processes,” said Thomas Baile, director of Industrial Markets at Portescap.

By ensuring the integrity of IoT data, companies can confidently pursue strategic initiatives such as data modeling, generative AI, machine learning and other advanced use cases.

Samotics, a leading provider of real-time actionable insights to eliminate unplanned downtime and energy waste, has been selected by thyssenkrupp to monitor the condition and performance of its hot rolling mill in Duisburg.

The Water Environment Federation has awarded vice president and industrial water expert Houston Flippin the prestigious W. Wesley Eckenfelder Industrial Water Quality Lifetime Achievement Award.

OPEX Corporation has won a Gold 2023 Merit Award for technology in the category of Robotics for the company’s Infinity automated storage and retrieval system (AS/RS).

Object Management Group (OMG) announced the program committee for the new digital transformation event Transform! @InfoComm 2024.

ISA Mentor Greg McMillan answers the question, "How Can we Improve Logic Control Contact Status Awareness and Operator Response?"

ABB and Altilium have signed a Memorandum of Understanding to explore automation, electrification and digital solutions for European battery recycling plants.

FUJIFILM Diosynth Biotechnologies, Merck and Pfizer will help Emerson develop standards for holistic digitalized recipe platform to increase speed to market for life-saving drugs.

VTT, Nokia and Sandvik, along with other Finnish companies, have taken steps towards deploying state-of-the-art 5G private wireless networks and edge intelligence to support autonomous mining.

Industrial Ethernet switches can help safeguard Industry 4.0 networks from intruders.

Fizyr, which provides the smartest and fastest computer vision software for robotic systems, has won the 2023 AI TechAward in the Visual/Image Machine Learning category.

Frank Hurtte presents "The New Sales Guy Project" as an indispensable resource for those embarking on a sales career in knowledge-based distributor industries such as Electrical, Industrial, Automation, Fluid Power, Safety and Power Transmission.

Automated Storage and Retrieval Systems have revolutionized the warehousing industry, offering a myriad of benefits, including improved efficiency, space optimization and enhanced accuracy.

Cybertrol Engineering will introduce and demonstrate advanced PalletWorks 2.0 capabilities at both Process Expo (Oct 23-25) and Automation Fair (Nov 8-9).

Learn about drafting and writing an IT/OT cybersecurity strategy for any #criticalinfrastructure or given industrial organization

The research collaboration will bring greater use of artificial intelligence and cloud computation in the world’s most comprehensive digital twin across electronics systems based industry sectors.

The subsidiary, which will commence operations on Oct. 1, 2023, represents an important step forward for Beamex in the key Netherlands market and further enhances its position as a global leader in the calibration industry.

The program provides engineering graduates with direct customer work at mining sites using the latest technology and building a more sustainable future.

By pairing reliable measurement solutions with energy management systems, companies can identify opportunities for energy savings, simultaneously reducing operational costs and aiding the push toward sustainability.

This coveted certification was awarded to Moxa's flagship industrial secure routers, the EDR-G9010 and TN-4900 Series.

Origem Energia and Datagration announce groundbreaking three-year agreement to implement Artificial Intelligence (AI) and Machine Learning (ML) technologies in the Brazilian energy sector.

KUKA featured its highly flexible KR IONTEC medium payload robot in a bag palletizing cell designed by system partner Elevation Packaging and Equipment at PACK EXPO 2023.

The partnership acknowledges ABB’s significant footprint in Canada, its contribution to furthering innovation across key sectors of the future and delivering economic benefits that reach far beyond their operational footprint.

During PACK EXPO 2023, KUKA Robotics featured a complex case packing solution using its KR IONTEC robot with system partner DGT Solutions, Inc.

At PACK EXPO 2023, KUKA Robotics showcased its complete end-to-end process automation multi-robot cell for the Fast Moving Consumer Goods (FMCG) industry.

Galil Motion Control, a renowned industry leader in the motion control market, is proud to announce the successful attainment of UL/CSA certification for several of its premier controller series.

Hosted by the Association for Advancing Automation (A3), the long-running event explores key issues in robot safety with an in-depth overview of best practices and current industry standards.

Patti Engineering is proud to celebrate the recent accomplishment of Sr. Controls Engineer II Nikhil Niphadkar.

Rockwell Automation aids iconic BIC to shift toward standardized and paperless operations with its Plex Manufacturing Execution System (MES).

Program management, tool wear, breakage monitoring and more are optimized through machine tool digitalization.

How can companies make the most efficient use of automation, artificial intelligence, renewable energies and hydrogen? HANNOVER MESSE 2024 provides the answers.

Cyolo elevates OT security with release of Cyolo 4.3 and KuppingerCole report on OT cybersecurity landscape, key architectures and functionalities, and regulatory compliance.

Disruption is associated with disturbances triggered through a change. Reasoning for disruption lies not only in technology innovation, but is also governed by other factors like industrial, socio-political, financial and environmental aspects.

The N-Tron Series NT5000 Gigabit Managed Layer 2 Ethernet switches have been voted the winner in the Automation & Controls category.

The strategic partnership supports IDEC’s mission of creating an optimal environment for humans and machines.

The new World Robotics report recorded 553,052 industrial robot installations in factories around the world–a growth rate of 5% in 2022, year-on-year.

Global sales of geared motors and industrial gears in 2023 are expected to be around $12.7 billion, a slight decrease compared with 2022.

ISAGCA would like to get a better idea of how its parties are using ISA/IEC 62443 with a brief yet comprehensive survey

Leaders of complex automation projects often have many conflicting and challenging problems to solve at once. They would do well to help their teams focus on the big stuff.

Robots with 3D vision systems can quickly identify food contamination.

The online course will help participants upgrade their skills in this growing technology.

SEMI today announced the election of four new members to the SEMI North America Advisory Board (NAAB).

The new “Responsible AI Guidelines” address not only compliance and the responsible use of artificial intelligence (AI) but also advance the technology.

stow Group announces the launch of the new “Movu Robotics” brand, developed to strengthen its “Robotics” business unit and to meet increasing customer demand for Automation and Robotics solutions.

The three year financial partnership will enable the Well Done Foundation to continue the race to plug methane emitting orphan wells across the United States.

Thomson Industries, Inc, a leading manufacturer of linear motion control solutions, has introduced a video highlighting the exceptional workings of its Electrak XD actuator.

Discover the world of supercapacitors–a compact, durable and eco-friendly energy storage solution. Learn how they work, their benefits and their diverse applications that include: railway systems, industrial automation and much more.

One of the most significant pain points in the construction industry is the frequent breakdown and inefficiency of equipment, which not only lead to project delays but also escalate costs. Preventive maintenance addresses these challenges head-on, ensuring the longevity and efficiency of machinery.

At this week’s EMO Hannover, Tezmaksan, a leading European manufacturer of robotics and automation, launched three new iterations of its innovative CubeBOX system.

NASA researchers believe the new configuration will allow them to continue performing normal-gravity liquid droplet combustion experiments without requiring Zero Gravity test equipment.

Integrated into iBase-t’s Solumina Manufacturing Operations Platform, HOOPS Exchange provides unprecedented CAD data access and publishing to support engineering and manufacturing workflows.

Everactive’s solutions will complement Rockwell Automation’s Dynamix product line, which will be ideal for Rockwell customers seeking actionable insights from their rotating equipment assets, without the concern of interruption from having to replace batteries in the process.

Here are some key best practices that global organizations are using to reduce cyber risks and improve operational efficiencies.

Understand why the food industry is targeted by cybercriminals?

Spotlighting the breadth and scope of its automation capabilities, KUKA will feature a wide variety of robotic solutions from education and training to augmented reality and collaborative robots at WIMTS 2023.

The advantages of automation logistics can be summarized as follows: enhanced customer service; increased scalability and efficiency; increased organizational control; and reduction of mistakes.

The one-of-a-kind annual event will be held at the Boston Convention and Exhibition Center, Nov. 6-9, and is expected to attract over 10,000 participants from around the world to Discover What's Possible with the hottest innovations, the smartest experts and the latest strategies.

Automation does not eliminate jobs; rather, it repurposes existing jobs and creates new ones.

The partnership will deliver advanced edge data processing appliances for Industry 4.0 environments.

In 2024, we will see continued efforts to move toward smart manufacturing, increased adoption of IoT enabled asset monitoring technologies, the use of AI in digital twin, robotics, immersive technologies and a concerted effort to reshore manufacturing.

Companies are investing in their employees to ensure they have the knowledge and skills necessary to do their jobs efficiently and effectively.

Nowicki, Protech and N&N Nadratowski food processing solutions will take the stage in live demonstrations and informational presentations.

While TSN will change over time, automation vendors can benefit from considerable gains by providing innovative capabilities to their devices now and leverage firmware upgrades for future compatibility.

The privately-held Brightpick, with more than 200 employees worldwide, has ramped up operations to fill the demand and is now manufacturing hundreds of the robots annually for installations across the world.

ABB is partnering with SMS group in a multi-million-dollar project to supply all the medium-voltage (MV) motors and MV drives for a new hot strip mill at Hazira, in Gujarat.

IBASE Technology Inc., a renowned manufacturer of industrial computing platforms, is excited to announce the expansion and relocation of its HQ office in Taipei, Taiwan.

Skkynet has announced fiscal quarter-end performance for Q3 2023, delivering exceptional sales growth of 19%.

The first event will be hosted by IFS customer Frozen Beverage Dispensers (FBD) in San Antonio, Texas, on Oct. 26.

“On behalf of the Cabling Installation & Maintenance Innovators Awards, I would like to congratulate Softing on its Platinum-level honoree status,” said Cabling Installation & Maintenance Chief Editor, Patrick McLaughlin.

Effective hiring is crucial to ensure a company can achieve its goals and be profitable. So, how do you make sure you hire the right leaders with the right skillset?

Digital twins provide improved visibility by facilitating planning, preparedness and predictions. Many people are increasingly interested in using them to monitor critical assets, like heating, ventilation and air conditioning (HVAC) systems.

André Uhl, a successor from Schneider Electric, will lead the executive strategy for the open FDT/DTM standard.

Siemens AG and DMG MORI are offering an industry-defining digital twin for machine tool processing on the Siemens Xcelerator Marketplace.

60% of incidents result in operational disruption, driving the need for proactive OT defenses and incident response.

As of Sept. 1, 2023, Ronen Boneh took over as CEO of Elmo Motion Control, headquartered in Petah-Tikva, Israel.

Professor Adisa Azapagic MBE has been presented with the Institution for Chemical Engineer’s (IChemE) most prestigious medal today, prior to her keynote lecture delivered at the European Congress of Chemical Engineering in Berlin.

With valves accounting for up to 70% of fugitive emissions (FE) from plants and refineries, tackling leakage is among the biggest obstacles to US industry achieving net zero by 2050.

Process orchestration is a critical, yet often overlooked step in the journey to improve automation maturity and properly fold technology into an automation strategy.

The robotics startup has launched the latest autonomous outdoor security patrolling robot, Ascento Guard. This next gen security tech allows companies to save cost while allowing security providers to fulfill more contracts.

Siemens launches study of 1,400 executives globally revealing regional, city and industry insights regarding the infrastructure transition across energy systems, mobility and buildings.

Mobile robots have experienced substantial growth in the last decade due to their autonomous mobility, which has been propelled by advancements in robotics technology, autonomous navigation and artificial intelligence.

The cloud-based Centrix platform proactively secures all assets, remediates vulnerabilities, blocks threats and protects a company’s entire attack surface.

92% of U.S. manufacturing respondents surveyed plan to increase AI investment in the next year, compared to 100% in China and Australia.

Rivelin Robotics will make a return to Formnext 2023, Nov. 7-10, in Frankfurt, after its award-winning debut at the 2022 event.

“Digital twins give you a digital version of your physical assets that works in real time. More specifically, they give you a way to model and test in complex environments by simulating them,” said Boyd.

Registration has opened for IMTS 2024–The International Manufacturing Technology Show, taking place Sept. 9-14 at McCormick Place in Chicago.

The projects for power company EDP will improve cybersecurity, extend plant lifespan, and support the digitalization.

The products made in state-of-the-art facility will support customers in the energy transition and contribute to the build out of America's infrastructure.

Siemens has received two major orders to set up the charging infrastructure for electric buses (e-buses) in two cities in Germany.

The latest Eaton investments support surging customer demand for energy transition and electrification projects.

Volunteering with ISA provides an opportunity to contribute to our mission and create a better world through automation, all while accentuating your resume with an esteemed ISA committee.

This September 2023 issue of our e-F@ctory Alliance Smart Factory Solutions newsletter includes: The Top SCADA Trend That Benefits the End Users, Realize an Efficient IIoT System with CC-Link IE TSN, Bridging the IT/OT Security Gap, 100+ Axes of Coordinated Motion Video Case Study, and OPC Servers for Windows and Linux Platforms

Global software developer eschbach has named Felix Monschein as managing director, North America. He will lead the day-to-day operations of the eschbach North America market and build on relationships with eschbach’s existing customer base.

Gotion High-tech will further strengthen intelligent battery manufacturing capabilities through platform that connects R&D, manufacturing and management to accelerate digital product development.

The new offering saves time, lowers shipping costs and decreases carbon footprint.

The interface between the EPLAN Platform and the 3DEXPERIENCE platform of Dassault Systèmes will be systematically expanded by both parties working together

Large organizations often form a central part of complex supply chains. They must work with many stakeholders, including suppliers, manufacturers, distributors and retailers.

With attendees hailing from various corners of the world, the MESI 4.0 Summit proved to be an epic gathering of industry leaders, fostering collaboration and driving innovation in the realm of manufacturing.

The new CNC generation from Siemens, which was launched on the market in 2019, comes with numerous innovations in software and hardware.

Global fab equipment spending for front-end facilities in 2023 is expected to decline 15% year-over-year to US$84 billion from a record high of US$99.5 billion in 2022 before rebounding 15% YoY to US$97 billion in 2024.

The campus will strengthen ABB’s “local for local” set up increasing production capacity by 50% to enhance ABB’s ability to meet growing demand for flexible automation and robotics solutions close to its European customers.

American Battery Factory has selected Honeywell Technologies for its new gigafactory.

The new camera, lighting and lensing hardware complements TwinCAT automation software for a comprehensive, integrated image processing solution–backed by iF and Red Dot awards.

ABB’s March 2023 Energy Insights report reveals that 58% of business leaders believe that today’s energy crisis could delay their emission reduction targets by up to five years.

RoboBoston, one of the world’s largest celebrations of robots and robotics, takes place in the innovation-focused Boston Seaport neighborhood on Friday, Sept. 29 and Saturday, Sept. 30, 2023.

ASTM International’s robotics, automation and autonomous systems committee (F45) is seeking participation in the development of proposed standards for testing and recording assembly capabilities of robot systems.

The 50th anniversary celebration marks Swedrive's continued success and growth over the past five decades. Swedrive was founded in Lagan, Sweden, in 1973 and has since kept its local touch even though the customers are spread worldwide.

Supply chain disruptions are among the most pressing issues for today’s manufacturers. While geopolitical tension and events like the COVID-19 pandemic have taken the spotlight in this area, another risk factor — cybersecurity — deserves attention, too. Upstream and downstream supply chain attacks pose serious risks to manufacturers and their partners. As manufacturers embrace Industry 4.0 technologies, their cyber vulnerabilities throughout the supply chain rise. Many organizations now realize the need to address these risks, but fewer understand that an interconnected supply chain means shared weaknesses between parties. The Importance of Supply Chain Cybersecurity Manufacturing experienced the most cyberattacks of any sector in 2022. One of the primary reasons manufacturers are such popular targets is because their attack surfaces are massive. In addition to a skyrocketing number of internet-connected devices, they have extensive third-party dependencies, opening them to supply chain attacks. Supply chains have digitized to increase efficiency and reliability, and parties share vast amounts of data. A manufacturer’s upstream suppliers, 3PLs and downstream partners may all have access to their systems and sensitive data. Consequently, an attack on one entity in the supply chain can affect everyone involved. One such attack in 2022 led an automaker to fall 13,000 vehicles behind production targets despite not targeting the manufacturer directly. Instead, it hit a parts supplier, leading to a network shutdown at its facility. As a result, the supplier couldn’t fulfill orders or communicate with its downstream customers. Other attacks could target a software provider to steal sensitive customer information from manufacturing partners. If a breach from a downstream supply chain partner reveals enough personal information about a manufacturer’s customers, it could also land them in legal trouble. These situations will become more likely as cybercriminals realize how much disruption they can cause through one attack. How to Reduce the Risk of Supply Chain Attacks Given how severe supply chain attacks can be, manufacturers must prevent them whenever they can and mitigate them when they can’t. Here are some strategies to reduce the risks of upstream and downstream attacks. Conduct a Risk Assessment Supply chains are large and complex, so it can be challenging to know your weak points. Consequently, performing a cyber-risk assessment is essential to reveal what makes your chain vulnerable and how you can address it. Third-party risk assessments should involve network mapping to show dependencies and penetration testing to judge the strength of existing cybersecurity measures. These services incur extra expenses but save money in the long term by preventing costly attacks. The average cost of a data breach in the U.S. reached $9.44 million in 2022, so the upfront cost is well worth the investment. You can’t defend what you don’t know is vulnerable, and that’s precisely what a risk assessment reveals. These tests should look at a manufacturer’s internal controls and processes and those of their upstream and downstream partners. Many organizations likely give too much access and information to too many parties. Thorough assessments bring these to light to inform more effective changes. Hold Supply Chain Partners to a Higher Standard Manufacturers should require more from their upstream and downstream partners. Just as some companies only work with those who meet certain ESG criteria, manufacturers should require proof of high security standards before working with anyone. This selection begins with researching potential partners’ security backgrounds before reaching out. Any business that has experienced a major breach or handled a cybersecurity incident poorly is a liability. You should also look for third-party security standards like ISO 27002 or NIST SP 800-53 certification. It’s important to remember that you can’t reasonably ask for something you don’t achieve on your own end. Manufacturers also should pursue cybersecurity certifications to offer assurance that they won’t jeopardize partners’ data either. Minimize Access Privileges Even if everyone in the supply chain meets higher security standards, attacks are still possible. No defense is 100% secure, and even the most experienced employees can still make mistakes that let attackers in. Given these risks, manufacturers must restrict who can access what data. The safest solution is to implement the principle of least privilege. This holds that every user, app and device should only be able to access the data and systems it needs to do its job. This may seem like limiting visibility at first, but it ensures one breach at any point in the network can’t jeopardize all your data. Minimizing access privileges is also an important way to stop insider threats. Over half of all organizations have experienced one in the last year, so preventing internal breaches is crucial. These are usually a matter of human error rather than malicious employees, but the effect is the same. Implement Continuous Monitoring Many technical controls necessary to stop supply chain attacks vary depending on the specific technology in use. However, some are essential in every situation. That’s the case with continuous monitoring. Continuous monitoring uses artificial intelligence (AI) to watch for suspicious activity across company devices and networks. If something off occurs — such as unusually large file transfers or a user trying to access a database they don’t normally need — the AI stops it and alerts IT staff. These quick responses are crucial for preventing internal and external breaches. Using AI also removes the need for a dedicated security operations team and enables faster, more accurate warnings. Create a Backup and Recovery Plan Even if every party in the supply chain implements these other steps, breaches are still possible. Despite rising awareness around cybersecurity, 68% of all organizations have experienced a cyberattack in the past year. These occurrences are too common to assume they’ll never happen to you, so you need a backup plan. Manufacturers must keep backups of all sensitive data and mission-critical systems, both offline and in the cloud. Every organization in the supply chain also needs a formal process for using these backups to recover from a breach. That plan should include communicating the breach to affected parties and several mitigation measures. Supply chain organizations should review these plans annually to ensure they’re still relevant and effective. Repeated risk assessments can also help by revealing any new vulnerabilities to address. Supply Chain Attacks Demand Attention Supply chain attacks can be devastating and happen in any part of the process. While digitization is important, cybersecurity improvements must be part of manufacturers’ initiatives to address the resulting vulnerabilities. Effectively mitigating these threats requires cooperation among all a manufacturer’s partners. These broad shifts can be challenging but are far less costly and disruptive than a successful attack. Security is always worth the effort.

From manufacturing to driving electric vehicles, Honeywell is using its technologies and expertise to improve safety and advance global electrification.

Research reveals that AI (52%), automation (51%) and machine learning (49%), are the foundation for creating business value.

Even if you have up-to-date antivirus software, there’s still a chance ransomware can infect your computer. If cybercriminals know what they’re doing, they can easily evade scans and bypass your protections.

Wendy Mlynarek, strategic business development director at DELMIA, takes a closer look at the many applications of augmented reality in the manufacturing sector, whilst also exploring some of the basics for the sector.

Flender Group CEO Andreas Evertz said, “For both our wind and industrial business we see enormous growth potential on the continent."

“I’m really passionate about retention of women in male-dominated fields because only a truly empowered, diverse workforce can drive the best business outcomes and innovations,” Neal said

Find out how legacy production can gain visibility, predictability and flexibility to satisfy smart factory goals.

With the extension of its production location in Jimbolia, Romania, the FAULHABER Group is taking a significant step to boost its competitiveness on the market and at the same time to satisfy the growing demand for its high-quality products.

Siemens Smart Infrastructure business aims to advance technology for a greener future.

“July is typically one of the slower months for manufacturing technology orders, so to be down slightly is not surprising,” said Douglas K. Woods, president of AMT.

Quantinuum’s advanced technology provides heightened protection against threats to end users and critical infrastructure.

The new cobot, which brings 18” of additional reach radius (36” diameter increase), greatly broadens the range of weldments that will be achievable in a given fixture setup.

Scientists at the University of Konstanz (Baden-Wurttemberg, Germany) recently filed for a patent for a new AR-assistive wearable headset designed to teach older adults how to improve balance.

A recent survey, The State of the Hourly Worker, delved into factors important to hourly workers, such as job satisfaction, retention, work schedules, the impact of the pandemic and benefits. Here are some highlights from the findings.

The Industry IoT Consortium (IIC) published the newest edition of the Journal of Innovation (JoI), The Role of IoT in Shaping the Future of Supply Chains.

The plant’s opening makes Schneider Electric’s El Paso campus the company’s largest in the U.S.

The automatic manufacturing system grants full flexibility to handle multiple model configurations for each of the two distinct SUV body frames in addition to the brand’s other vehicles.

The acquisition expands Emerson’s factory automation offering and enhances exposure to key growth opportunities in discrete and hybrid markets.

Rockwell Automation will collaborate with Fork Farms, a Green Bay-based agriculture technology startup company, to build a highly automated, indoor 7,300-square-foot hydroponic vertical farm within Rockwell’s Milwaukee headquarters.

Wibu-Systems USA has joined the Association for Advancing Automation (A3), North America’s largest automation trade association and global advocate for advancing the benefits of automated machinery.

Quality assurance vs. quality control- what's the difference?

The Board of VDMA Robotics has appointed Thomas Hähn, founder and CEO of United Robotics Group, as a new member of the Board.

Global semiconductor equipment billings dipped 2% year-over-year to US$25.8 billion in the second quarter of 2023, while quarter-over-quarter billings slipped 4%.

Besli has integrated three Kardex Compact Buffer Modules and four Kardex Shuttles with Kardex Power Pick System inventory management into their distribution center for a 30% reduction in search times and a 50% efficiency increase.

Global technology, software and engineering leader Emerson will exhibit its Floor to Cloud packaging solutions at PACK EXPO Las Vegas, Sept. 11-13, 2023.

The special worldwide arrangement will see iCOMAT sell and support a dedicated version of VERICUT VCP/VCS software in support of its patented manufacturing process for composites.

Ethernet flexibility and online configuration tools punctuate Festo’s portfolio.

Demand is exploding for automated depalletizing, trailer unloading, item picking, bin-to-bin pick and place, and detection, and Fizyr is expanding its North American operations to bring new levels of reliability to these complex tasks.

FORT Robotics has announced that its Endpoint Controller—which brings safe, secure, dynamic wireless control to mobile, automated or autonomous machines—has received SIL 3 functional safety certification, as defined by IEC 61508.

Universal Robots, the world’s leading collaborative robot (cobot) company, will be hosting three virtual conferences in September and October.

WISER Systems will present: Why UWB RTLS is the Right Technology for Manufacturing Environments.

Yokogawa Australia has received an order from Monford Group Pty Ltd. to supply an energy management system for the initial phase of the Yuri Green Hydrogen Project, which is constructing an industrial-scale renewable hydrogen production complex in Australia.

The advanced autonomous formation system will enable gigafactories to obtain higher A yield battery cells through Honeywell’s Battery Manufacturing Excellence Platform.

The project will target improvements in energy efficiency, decarbonization and circularity in plants and production facilities.

An understanding of Overall Equipment Effectiveness (OEE)

When relaxing poolside, odds are that the equipment keeping the water flowing and filtered safely is not top of mind. Behind the scenes, there are likely some fascinating control systems keeping things afloat.

Japan’s fastest-growing intelligent robotics company, Mujin, secures capital to pave the way for a new era of robotic automation.

Swedish hair and beauty specialist Lyko has chosen Vanderlande to automate its new warehouse in Vansbro, Sweden.

“More automation” used to be the answer, but a more effective solution is to make the factory more flexible.

As our world becomes increasingly interconnected, the intertwining web of Operational Technology (OT) and the Internet of Things (IoT) is quickly becoming the next frontier in the digital age

Siemens Grid Software has secured a new contract with Northumbrian Water Group and deployed EnergyIP MDM X, part of the Siemens Xcelerator portfolio.

With its advanced electrical solutions, ABB is enabling safer, smarter and more sustainable operations at a new Dutch bioplastics plant.

Former FogHorn CEO David C. King joins board of directors, providing significant guidance for the American industrial IoT market.

As the effects of climate change become increasingly apparent, sustainability has become a key focus area for manufacturers worldwide who are under pressure to reduce their environmental impact.

A Nitrex nitrocarburizing furnace enabled metal tooling manufacturer Castool Canada to bring its service treatment operation inhouse.

ARC Advisory Group’s new research on the Simulation Software market reveals that this market will be driven by the emergence of comprehensive simulation platforms, the use of the digital twin concept, and the expansion of the 3D virtual simulation software.

The ultra-low voltage motors market is currently in its growth phase.

Greg McMillan discusses how to get the best from people working on your project in the "Ask the Automation Pros"

Digital twins are machine and process simulations that enhance CNC part and tool program management, commissioning capabilities, operator training and more.

University of Houston researchers are developing an autonomous robot to identify potential pipeline leaks and structural failures during subsea inspections.

Despite the backdrop of significant supply chain disruptions in recent years, it's evident that a number of organizations are still in the process of enhancing their preparedness.

Labor shortage has become one of the most pressing challenges for small and midsized enterprises (SME) in OECD countries.

Siemens manager Virginie Maillard has been elected to the Metaverse Standards Forum’s board of directors.

The winners will be announced on Oct. 12 at Bentley’s 2023 Year in Infrastructure and Going Digital Awards Event in Singapore.

IFS, the global cloud enterprise software company, announced it has signed a definitive agreement to acquire Falkonry, Inc.

Over the past decade, AI has pushed steadily at the boundaries of the cloud computing environment in a bid to infiltrate the realm beyond.

Automation specialist B&R is using this year's PackExpo exhibition in Las Vegas to feature open solutions with Codian robot mechanics, now integrated and rebranded within B&R.

Kontron gives "Best Added Value" Sales Partner 2022 Award to Bicker Elektronik.

The number of people in the company’s educational programs in Germany grew 15%, and more than 1,500 apprentices and participants in work-study programs will start their careers at Siemens in 2023.

Three of the biggest names in global technology have joined forces to highlight the ability of already-available 5G, artificial intelligence (AI) and automation solutions to transform manufacturing and improve productivity, efficiency, environmental impact and safety, while reducing costs.

According to research from ABI Research, the global market for automation hardware is expected to grow as manufacturers adopt automation solutions with complex architectures.

The market continued its strong growth in 2022 and is expected to continue to experience high market growth globally.

The recent expansion of the global artificial intelligence industry is considerably aiding the quick uptake of digital technologies and the internet.

Notable suppliers include Alps Alpine, Ambiq Micro, Amphenol LTW, HELUKABEL and Zettler Magnetics.

A new position paper offers recommendations on how policy makers and private-sector leaders can be best equipped to address the urgent need for improved critical infrastructure cybersecurity.

In 1963, the electronics division of the Leuze Group came into being.

Addressing the market need, the acquisition helps to alleviate the current skills shortage, utilizing an advanced diagnostic engine that analyzes ~93% of machine tests without human intervention and remote machine analysis.

Oil up those rusty social skills. ISA’s Automation & Leadership Conference is designed to educate, inspire and have you interacting.

Schneider Electric has worldwide manufacturing centers that support critical infrastructures for customers in industries such as energy, government, healthcare, food, and others that are vital to everyday life around the globe

In the era of IOT and IIOT (Industrial Internet of Things), there is a growing demand to deploy solutions at the edge and preferably on an edge device

Grouping digital twins allows manufacturers to tailor their implementation to specific needs, such as optimizing product design or monitoring complex manufacturing processes.

More than 200,000 robotics enthusiasts have joined the Universal Robots Academy.

Large-scale battery storage systems enable utilities to improve renewable power generation with an industry-leading battery management system.

Climate change, growing population, limited resources, loss of biodiversity, food waste, sustainability concerns—these are the key reasons that make it close to impossible for modern agriculture to stay efficient without the use of technology.