Articles and News

By Reid Paquin, Aberdeen Group In December 2012, Aberdeen conducted research into the state of the engineering and technical workforce and found out that a majority of the 562 companies polled (over 60%) feel that they are understaffed in their engineering positions. Aberdeen looked into the challenges behind hiring and retaining engineering talent and uncovered what the industry leaders do to combat this problem.

By Bill Lydon, Editor Siemens hosted a thought leadership event on February 22, 2013 in Houston, TX. More than 300 oil and gas industry executives, technology leaders, and industry experts attended featured presentations, a trade fair and a networking event at the Houston Museum of Natural Science.

ARC says the total control valve, actuator and positioner market in India will grow by 7.5 percent by 2016.

ARC says the worldwide flow meter market has rebounded strongly, growing at double digit rates through 2011 and 2012 as suppliers fulfilled pent up demand in the power, mining, and oil & gas industries.

The program establishes a perpetual $250,000 endowment fund providing scholarships to students seeking a career in the industrial automation profession.

IP training for security integrators will be available in seven cities nationwide, including San Jose, St. Louis, Pittsburgh, Teterboro, Forest Park, Houston and Philadelphia.

The Stadtwerke Groß-Gerau Versorgungs-GmbH (GGV) municipal utility company installed the ORC and increased the power to heat ratio of its cogeneration units (CHP).

Servomex will incorporate elements of Precisive's gas sensing technology into its gas analysis solutions for the Hydrocarbon Processing market.

When searching for a job, seek out plants that have at least one seasoned engineer under whom you can work.

EM9 series frequency inverter is a brand-new vector high-performance frequency inverter. By decoupling control of motor magnetic flux current and torque current to achieve rapid-response and accurate torque control, can run a wide range of high-precision speed and torque control operation.which is suitable to industrial automation the in every field.

EM8 series v/f control frequency inverter is a new high performance of products. This inverter can realize high torque, high precision, wide variable speed and low noise drive. And have wide application, EM8 series frequency inverter can meet most customer’s requirements.

OSI will supply a Distribution Management System (DMS) based on the Monarch SCADA platform to Bluebonnet in Central Texas.

Hatia previously served as Director General for Voith, GL&V, Metso and ITT/Xylem.

12-page, full-color brochure describes actuators and positioners for operating final elements such as control valves, butterfly valves, dampers, and louvers.

ST130 is approved for use in explosive atmospheres, with ATEX ratings of Ex II 3 G Ex nA IIC T4 Gc -40°C ≤ Ta ≤ +80°C (explosion-protected for Category 3G, Group II, Zone 2 gas atmospheres; non-incendive).

ISA training can provide the high-performing workforce that manufacturers and global economies need to grow

MEAN provides power supply, transmission and related services to more than 60 communities, one public power district and one joint-action agency in four states: Colorado, Iowa, Nebraska and Wyoming.

At Sanico's site in Turnhout, Belgium, PAS-X will replace the existing third party manufacturing execution system (MES) and the warehouse management system.

IMS Research says the growth rate for new motor control Ethernet nodes--including PROFINET, Ethernet/IP, POWERLINK and EtherCAT--is projected to be the highest across the whole industrial space at nearly 30%.

Training program makes available several of ISA’s technical training courses to a majority of cities in the US where expert-led ISA instruction has not previously been offered.

More than 900 explosionproof Rotork IQ intelligent electric valve actuators will be installed in a four stage project to motorise manually operated valves on the refinery’s tank farms.

The interactive online game lets players from around the world race against the clock to find and fix the most problems.

ABB robot experts, part of the company’s Brainy Bunch, will discuss emerging power and automation issues on line, March 25 – 28.

Initiative by ISA Kolkatta Section in India Spurs Membership and Professional Growth

January U.S. manufacturing technology orders totaled $370.62 million, down 26.5% from December and down 12.2% reported in January 2012.

Based in Boulder, CO, ASD supplies high-performance analytical instrumentation solutions, including spectrometers.

Intelitek is the key sponsor of the Automated Manufacturing Technology and Robotics and Automation contests, both at the state and national levels.

Course dates have already been released for Austria, Belgium, France, Ireland, Netherlands and UK. Courses in other countries will follow.

By Lantech To solve interoperability issues, ITU (International Telecommunication Unit) drafted a protocol, G.8032 Ethernet Ring Protection Switching (ERPS), to be compatible with the Ethernet standard and make the recovery scheme less than 50ms.

ISA Executive Director & CEO Pat Gouhin Confers with Global Association Executives

By Mark Howard, Zettlex Angle sensors are generally rated and, just as importantly, priced according to their measurement performance. But performance is stated in a variety of ways and some manufacturers confuse matters by using crafty ‘spec-manship.’

Patti Engineering will participate in the Manufacturing in America Symposium featuring the Technology Tip-Off at Ford Field in Detroit, MI on March 20 - 21, 2013.

A Metso DNA automation system controls the bio-gasification plant, which was constructed as part of the existing coal-fired power plant. The produced gas will be combusted along with coal in the existing coal boiler.

IndraMotion MTX performance CNC, using the CML 65 controller, was certified as a product that conforms to the Ethernet standard sercos.

By Bill Lydon, Editor Part 3 - A survey conducted by pharmaceutical companies identified that more than half of the companies felt automation was meeting operational goals. The panel then outlined the areas for improvement in automation over the next 5-10 years.

The 20-page news magazine includes a feature article on blended infrastructure, several application articles and sercos product news from a number of manufacturers.

By Reid Paquin, Aberdeen Group In December 2012, Aberdeen delved into the psyche behind the implementation of a safety program or safety technology at 169 manufacturing organizations. Here's a summary of what they learned.

This acquisition encompasses several business units: Giddings & Lewis, Cincinnati and Forest-Liné, specializing in composite processing and large metal cutting machines, as well as a unit dedicated to aftermarket services.

By Bill Lydon, Editor Siemens COMOS 10 is an enterprise platform for the process industry that integrates functions including automation design, plant engineering, operations, and enterprise interfaces.

Add flow measurements to every important stream and compute online metrics for the process efficiency and capacity of each key unit operation.

To commemorate this milestone, the Foundation (HCF) is hosting special End User Events in Europe, North America and Asia throughout 2013.

ABB will help to measure and control the quality of the LNG at all points in the process, for Cheniere Energy’s Sabine Pass LNG (liquefied natural gas) export facility in Cameron Parish, Louisiana.

Patti Engineering is a CSIA Certified control system integrator offering engineering and software development services in the fields of industrial automation and shop floor IT solutions

eBook shows quality professionals how to turn manufacturing data into action, proving the value of quality improvement projects.

Have you submitted a nomination for this year’s Celebrating Excellence awards?

All areas of production are being expanded, including its motor assembly, machining departments and distributor training facility.

The Control System Integrators Association (CSIA) announces that Integrity Integration Resources in Plano, Texas and Thermo Systems, LLC in East Windsor, New Jersey recently became recertified.

The intensifying need for energy-efficient motors to reduce operational costs is a key driver in the European fractional horse power (FHP) and integrated horse power (IHP) motors market.

According to a new report by IMS Research, Windows 8 will make little impact on the industrial PC (IPC) market in the next three years.

This is the fourth consecutive time Patti Engineering has passed the CSIA audit, which is valid for three years. The CSIA audit consists of 76 criteria necessary for operating a top of the line control systems integration company.

Vector Controls and Automation Group (CAG) is a newly formed representative partnership consisting of five representative organizations that merged in March 2013.

The online tool guides engineers in selecting grounding methods for shielded cable installations.

The Summit, being held June 24 - 27, will provide professionals with end user automation learning opportunities - from process and discrete to motion control and drives.

With skilled personnel shortages, it’s critical to think in terms of a well-rounded knowledge base so that automation professionals will be well-informed, have superior judgment and decision-making pr

PRIME (Partnership Response in Manufacturing Education) is creating strong partnerships between exemplary high schools, businesses and organizations.

The 250+ page catalog and design guide illustrates a wide range of products engineered for use as building blocks in sophisticated linear motion assemblies.

The virtual environment is based on an automotive plant. Numerous potential resource and energy savings are demonstrated in the tool-shop, press-shop, vehicle body-shop or paint-shop.

The university uses the instrument to continuously monitor granulation processes and to develop effective automated strategies for process control.

By Turck White paper identifies the differences between assembled and overmolded technologies, offers a comparison of the cordsets, and provides a detailed description of the advantages of overmolded cordsets.

The additive manufacturing systems market for industrial applications has made a strong recovery since the recession in 2009.

As a joint initiative with the airport company, Hannover Marketing & Tourismus GmbH (HMTG) and the Swiss firm Airport Media International AG, Deutsche Messe will operate a special Travel Service Lounge at the Airport Plaza.

Analytical Technology’s Q45P AutoClean pH monitors and D15-76 monitor with an Air Blast AutoClean system to indicate water quality and the presence of suspended solids in its waste water stream for Britannia Food Ingredients.

By Bill Lydon, Editor At PackExpo there were two innovations that really stood out as representing “thinking outside the box” creative solutions - one was Adaptive Robotic Tooling by FESTO and the other was the XTS Linear Carrier System by Beckhoff Automation.

By Matthew Littlefield With today’s competitive global economy, it’s no surprise that manufacturing and industrial companies are constantly trying to cut costs and improve productivity. Operational excellence programs can help with this.

By Bill Lydon, Editor IO-Link is gaining momentum as the first open standard for smart sensor I/O. IO-Link is a point to point network communications standard and protocol that is an IEC standard (IEC 61131-9) for sensors and actuators.

Modified Smith predictor design for periodic disturbance rejection

Enormous growth potential exists for logistics systems, medical robots, and applications in the agricultural sector.

Limited innovation and product differentiation, paralleled by rapid advancements in alternative power transmission technologies like VFD, pose a serious threat to the market’s future.

Automation expenditures by the upstream oil and gas sector, which includes exploration, production, and pipelines, are expected to grow at an rate of nearly 8 percent over the next five years, according to ARC.

By Nuris Ismail and Reid Paquin of Aberdeen Group Manufacturing companies invest millions, if not billions, of dollars in plant equipment. The pressure to get the most out of their current asset base while maximizing productivity is top of mind for most executives. While these pressures are extremely important, organizations cannot forget the impact that operational risks can have to their business.

The industrial OEM pressure sensor catalog features various sensor, transducer and transmitter products.

Shenzhen King Explorer Science & Technology plans to upgrade more than 100 customer emulsion explosive lines worldwide with fully automated packaging lines by using multiple Adept Quattro s650 parallel robots.

Controlco is now authorized to provide training to Systems Integrators and Contractors in the building automation, energy services, power/utility, and industrial sectors using the NiagaraAX Framework.

The two-day event, being held March 20-21 at Ford Field and the GEM Theater in Detroit, will bring together manufacturing and automotive industry executives, technology leaders and innovators to explore how technology is driving a manufacturing renaissance in America.

Estimate each process industry job before starting it and always follow up and compare the final cost figures against the initial estimate.

ISA Training and Education in March: Learn, Advance, Succeed

IFR estimates that in 2012 more than 160,000 industrial robots were sold, about the same number as in 2011.

The International Federation of Robotics says certain jobs may be reduced by robotics and automation but many more jobs are created.

Fieldbus protocols accounted for 75% of new industrial automation component network connections in 2011, but this is projected to fall to 69% in 2016. Growth of Ethernet is expected to be considerably higher to 2016.

The 2013 General Assembly will be held in Shanghai, China, on March 12-15, 2013.

The symposium, to be held 21-23 May 2013 in New Orleans, Louisiana, USA, will provide numerous opportunities to meet face to face with leading government officials on current and prospective regulatory requirements and activities.

sercos will show new safety concepts, products, and innovative technologies of exhibiting member companies during the Hanover Fair, April 8 - 12, 2013, in hall 9, booth D80.

The guide has attributes tailored for industrial organizations, and allows those involved in a GSP selection process to make quicker and improved decisions.

By Toni Ott, Cooper Crouse-Hinds When specifying explosion-proof (Ex d) enclosures to house electrical apparatus for use in explosive atmospheres, engineers must ensure they fully understand the implications of modifying the enclosure as part of the certified equipment prior to and after installation.

The PROFI Interface Center (PIC) in Johnson City, TN, made a significant investment in new equipment and systems to enhance its ability to train industrial networking engineers in coming years.

Lenze’s Formulas and Tables app provides engineers, drive manufacturers and trainers a mobile tool to design drive systems while on the go.

The Russian head of state will be in the Hannover Congress Centrum for the opening ceremony on Sunday, April 7, 2013, and will also take part in the traditional opening tour of HANNOVER MESSE on Monday, April 8, 2013.

Emerson will provide integrated safety and automation systems to help boost oil recovery and extend the life of the field while also reducing operating costs and minimizing safety and environmental risks.

How can we produce enough sustainable energy while avoiding unacceptable environmental consequences? ISA's book, Future Energy, explores the options.

The 2013/14 Cole-Parmer Sourcebook contains conversion factors, approvals to selection guides, and other reference material to make buying—and using—laboratory products easier.

Opened in partnership with Vietnam National Oil and Gas Group (PetroVietnam) and PetroVietnam University, the college will boost the technical skills of local engineers for the process industry in Vietnam and surrounding Southeast Asia.

Industrial Thinking’s Chronicle software connects to flowmeters using redundant Modbus and OPC protocols to report on Hydrocarbon and Co2 emissions from all facilities, including steam boilers, superheaters, furnaces and purge to flares.

Invensys, as the main automation provider, supplied complete control and safety solutions, including field instrumentation, process analytics and valves to the new Yaysky oil refinery in Kemerovo, a city in Russia.

ABB supplied embedded medium- and low-voltage switchgear, variable-speed drives and motor control centers, a plant-wide process automation system, and fiber optic network equipment cabling.

ISA’s Executive Director and CEO Patrick Gouhin participated at a meeting in Hong Kong exploring collaborative initiatives among industry associations throughout all areas of the world, including the rapidly growing Asia-Pacific region.

Intertec will supply environmental protection cabinets and shelters that will protect the field-based process analyzers at the new Sadara petrochemical complex in the Kingdom of Saudi Arabia.

Crouzet will use Netbiter as a remote management solution for their Millenium 3 Smart PLCs, allowing users access to data on field equipment over the web.

By Bill Lydon, Editor I recently had the opportunity to talk with Blake Moret, Senior Vice President at Rockwell Automation. Other than their process control initiatives, we discussed networks, energy monitoring, embedded controllers, regenerative energy and their services business.

Rotork supplied valve actuators for the pipework delivering water to the north and south coal processing (washing) plants for Mount Thorley Warkworth (MTW) in New South Wales, Australia.

Many techniques are available for the level measurement of media interfaces, each with its own trade-offs of advantages and limitations.

By Bill Lydon, Editor Part 2 - A survey conducted by pharmaceutical companies identifies their return on investment (ROI) of automation projects. The most enlightening (and disturbing) facts came out in a panel discussion of the survey results - it appears Operations and Automation people are not communicating enough.

By Solutions Direct White paper includes some basic questions to help customers choose the correct fixed mount pyrometer.

Catalog also provides engineers with a practical decision-making tool for selecting the right position sensor.

User Guidelines contain easy-to-understand application examples and show how to create user-derived function blocks to add to a company specific library, improving the reusability of the application programs.

First principle models & experimental models in a virtual plant offer powerful tools for process control improvement and an operator training system.

IMS says the DIN rail industrial PC (IPC) market is projected to be the fastest growing of all industrial PC types in 2013.

The ABB Research program is intended to support promising graduate students and senior researchers who are researching projects with industrial applications in the power and automation area.

exida issued a functional safety certification per the IEC 61508 and several application standards for the Emerson Process Management DeltaV CHARMS SIS product line.

Biglia's multi-functional turning centers of the 'Quattro' series use the Sinumerik 840D sl CNC.

Free Safety Automation Builder tool and Safety Functions help automate safety-system development and save machinery design time.

Dale Gaerke Selected 2013 Engineer of the Year by the Toledo/Northwest Ohio Community

According to IMS Research, the China market for motion control machinery shrank last year, but prospects will improve moving forward as the industry shifts focus to satisfying domestic needs.

The report, one part of CIMdata’s expanded coverage of this PLM segment, includes a revamped market segmentation, a discussion of trends in the market, and profiles of the leading S&A firms.

Machine Control Group, an engineering focused solution provider, will represent B&R Automation in Missouri, Arkansas, and western Tennessee.

The new Apps for iOS operating systems (iPhone and iPad) and devices based on Android 4.x. are now downloadable from the respective stores.

The 12-year rated valve-regulated lead acid (VRLA) batteries will extend maintenance cycles of their popular SG Series UPS product line.

This standard is based on USB 3.0 consumer hardware. Vision component manufacturers have embraced the standard and are expected to widely adopt it; many components are already selling today.

Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions.

The fieldbus interface increases the communications flexibility of the automation system for machine builders and end-users alike, further enabling the realization of the best possible application performance.

MAQ20 brochure describes Dataforth’s industrial data acquisition and control system, PID loop controller, and PEmotion data acquisition/test and measurement software.

2013 Northwire Northwire-NWI catálogo Lab360 idioma español está ahora disponible.

BACnet/IP Simulation System (BOSS) tool is a fully configurable BACnet device simulator coupled with network discovery and debug facilities. It is intended to facilitate product testing by manufacturers and assist integrators in assessing system performance before installation.

The team designed and built the “Delian One Remotely Operated Vehicle” which uses Phoenix Contact’s Nanoline Controller and nanoNavigator software to remotely maneuver and explore an underwater environment.

Economist Alan Beaulieu is optimistic about the future of manufacturers and the control system integrators who help them automate industrial equipment and systems. Beaulieu will deliver the keynote address at the 2013 Executive Conference of the Control System Integrators Association, May 1 – 4.

By Bill Lydon, Editor To remain competitive, a company needs to constantly expose its people to new ideas, processes, and technology. The investment in people attending trade fairs, like Hannover Messe, is a knowledge investment that is fundamental to maintaining and improving manufacturing competitiveness.

by Bill Lydon, Editor The success factors in manufacturing are changing - making it imperative that all size companies use automation as a strategic tool to compete. Companies large and small can cost-effectively implement automation systems ranging from robots to full-scale enterprise integration.

The Royal Mint makes coins and medals for 60 countries. It uses Analytical Technology’s pH, hydrogen peroxide and turbidity sensors for its water monitoring needs.

The 2013 product guide features a complete selection of Lantech product lines, including new industrial DNV switches, industrial IEC 61850-3 switches and industrial managed switches.

CP Automation is a specialist in the repair and replacement of automation equipment including electronic boards, PLCs and AC and DC drives.It will work in the UK cranes and hoists market.

The new location in Elgin, IL, will give the company significantly more office and warehouse space plus a laboratory and a training area for customers.

A New Approach to Advancing the Connected Enterprise

A common rule of thumb for most systems is to add at least 25 percent spare capacity to the original design.

Representatives of the Automation Federation participated in key meetings with White House National Security Staff to help forge national cybersecurity standards, guidelines and compliance testing.

The sercos international channel offers videos on hot topics in the automation and machinery industry as well as interviews, exhibition films and introduction of member companies.

Training is intended for those interested in CNC qualification, as well as students and teachers who are interested in obtaining expert materials on CNC programming and machine operation.

ADAM-4000 and ADAM-6000 series have been certified with Class I, Division 2 Groups A, B, C, D approval for use in hazardous locations where highly flammable substances may be present.

ISA provides its members with immeasurable opportunities to receive through collaboration, mentorship, volunteerism, sponsorship, and student scholarships.

Honeywell will supply an Experion Process Knowledge System (PKS) and Advanced Alarm Manager system to OOO Kirishinefteorgsintez for its refinery in Kirishi, Russia.

Based in Philadelphia, PA, WE Automation will serve the eastern Pennsylvania, southern New Jersey and Delaware markets.

Advanced Technology Valve in Italy will use aPriori Product Cost Management (PCM) software to replace manual cost estimating processes for its valve components.

Frost & Sullivan says manufacturers are attempting to attract additional end users by developing integrated hydraulic equipment products that are cost effective, compact and user friendly.

Before joining Tridium, DiCosmo was a Senior Vice President and General Manager of New World Systems, and President and CEO of Trubiquity.

Rosemount 8800 Vortex flowmeters accurately measure and optimize oxygen used in MORE s.r.l.'s electric arc furnace steel making processes.

"Industrial Automation and Control System Security Principles" outlines security principles, practices and standards that can safeguard critical infrastructure, defense establishment, and production capabilities from the risks of cyberattack.

The power plant will utilize bark and wood residues from the Syktyvkar sawmill and other biomass to produce 4 MW of power. Metso will supply process equipment and automation.

Since its birth in a Pennsylvania garage in the early 1970s, Red Lion has expanded its operations to include more than 15 offices across the Americas, Asia-Pacific and Europe.

App lets devices featuring openVPN be accessed via Apple smartphones and tablet PCs.

Improving Distillation Tower Operation

A roundtable discussion with water industry and regulatory experts says there is a need for improved maintenance of dissolved oxygen sensors to increase the accuracy of measurements.

Guide covers two-way radios, team communication systems, push-to-talk phones and broadband cards, WLAN systems, IP video surveillance cameras, mesh broadband networks, point-to-point bridges, and more.

December U.S. manufacturing technology orders totaled $499.43 million according to AMT, the highest order total in 13 years.

The qualification encompasses the requirements of the Westinghouse AP1000 commercial nuclear reactor design.

Moxa's ioLogik E1212 Ethernet remote I/O is being used on the Gateway Bridge upgrade project in Brisbane, Australia.

By Bill Lydon, Editor The International Federation of Robotics (IFR) provided a review of industry growth and hosted the IFR CEO Round Table discussion at AUTOMATE in Chicago. The bottom line is...robots create jobs by enabling manufacturers to be globally competitive and grow more quickly.

ABB will supply complete electrical systems including generators, distribution switchboards, transformers, drives and motors to power the ships’ thrusters and drilling systems.

As a silver member, InduSoft joins over 80 of the leading building automation vendors in the world in pursuing advancement of BACnet as a communication protocol.

Setpoints in industrial automation and manufacturing processes can be improved by achieving a higher level of control and knowledge.

By Bill Lydon, Editor A survey conducted by pharmaceutical companies of their operations management indicates management has higher expectations of benefits from automation than is being realized in their plants. Responses of that survey are highlighted in this Part 1 article from the 2012 Pharmaceutical Automation Roundtable.

IMS Research projects fewer instabilities in the US and Chinese MV drives markets in 2013, and predicts global market growth of 10 percent--despite a contraction of 4.6 percent in Europe.

For manufacturers of power transmission and control technology, MDA South America will be held in São Paulo in March.

Brookfield Renewable Energy uses Exele Information Systems’ TopView Alarm Notification software to monitor values in the data historian.

FL4000H flame detector has been certified by the Building Research Establishment (BRE) Global Group to the EN 54-10 standard of the European Construction Products Directive (CPD).

The Control System Integrators Association (CSIA) announces that Electro Controles del Noroeste SA de CV, Hermosillo, Sonora, Mexico, and P.J. Kortens and Company, Inc., Appleton, Wis., U.S., became CSIA Certified.

Hilscher enters U.S. market by signing Professional Control Corporation (PCC) in Germantown, WI and Electro-Matic Products (EMP) in Farmington Hills, MI, as distributors of fieldbus products.

Series 9411/21 and 9411/24 isolating device couplers met the FF-846 test specification to obtain formal Fieldbus Foundation registration.

Handbook provides expert advice on the design and application of load cells and weigh modules for tanks, silos, vessels, hoppers and conveyors.

ABB will upgrade the existing Celilo HVDC (high-voltage direct current) converter station in Oregon with valves, controls, transformers as well as switchgear and cooling equipment.

Tuning PI controllers for stable processes with specifications on gain and phase margins

American School of Gas Measurement Technology is the largest gas measurement school in the United States devoted to natural gas and natural gas liquid measurement, regulation and control.

A total of 22,598 robots valued at $1.48 billion were sold to companies in North America in 2012, beating the previous record of 19,337 robots sold in 2011.

By Bill Lydon, Editor With higher speed and more reliable Ethernet networks, lower cost more powerful computers, and virtualized systems, Thin Clients are becoming effective replacements for PCs.

Dennis Brandl, founder and chief consultant for BR&L Consulting, has been named Chairman, Americas Board of Directors, MESA International.

While much is written about RFID and how it will change the face of distribution, it is time to address several misconceptions about the technology and discuss the effects that recent developments have had on the discrete manufacturing sector.

This article examines how this new networking method compares to traditional wiring and the advantages of implementing safety networking.

Two examples are given here where the gain variation was sufficient to cause control problems, and was corrected by applying characterization.

Advancements in linear encoder technology allow higher speed operation too. Today's linear encoders and other devices are able to meet this challenge, are less noise susceptible, and cost less.

One of the most important and difficult decisions is often the very first decision: do you upgrade with internal resources or hire an outside consultant? Some of the arguments for each side in this debate are obvious. You know what you want better than anyone, but a consultant may have more experience in the actual process of acquiring a SCADA system. There’s a lot to be said in favor of both approaches. Neither is an inherently good or bad approach. We summarize below the key issues and how they affect both of these approaches.

For many OEMs, choosing the right sensor manufacturer is concern number one. OEMs want a manufacturer with a trusted name in the material handling industry.

As more and more "nodes" become connected – products, equipment, people, organizations – Metcalfe's Law comes into play. The effectiveness and value of the Internet continues to increase exponentially.

The level of control and the amount of information available are significantly improved over earlier methods. Most importantly, with web-enabled Ethernet, the ease of both getting information and displaying it is on an entirely new level than was possible with older technologies

Historically, expert knowledge of vibration analysis was required to start and maintain a vibration-based predictive maintenance program. This white paper describes how using intelligent sensors can alleviate the need for vibration experts.

OPC middleware products are designed to enhance any OPC-based application. An intelligent set of OPC products simplifies the commissioning and operation of OPC clients and servers, significantly improves the data throughput of your OPC interfaces, and ensures reliable OPC communication links.

Because the machines may be in remote locations where network infrastructure is not available, or on moving platforms where hardwired network connectivity is not practical, wireless communications is a networking alternative that offer installation cost savings, quicker deployment and even improved reliability in certain situations.

Wireless monitoring of valves can revolutionize industrial processing and help industries meet the demands of increasing competitiveness. Intelligent wireless valve monitoring in industrial environments enables real-time data sharing throughout a facility and this, by definition, increases industrial safety, efficiency, and productivity.

Enhancements in Revision 1.0 include an improved user interface, servo tuning capabilities with multiple tuning methods, real-time scopes, multiple device management and simplified communications.

Westermo will supply Viper EN50155 data communications equipment for Stadler Pankow's new FLIRT trains (Fast Light Innovative Regional Train).

Honeywell will supply integrated control and safety systems for the Borouge petrochemicals complex in Ruwais, Abu Dhabi.

Here are just some of the reasons why you should use intelligent temperature transmitters in place of direct wiring strategies

When using photoelectric sensors in simple diffused mode (a.k.a. proximity mode), the sensor uses the target to reflect light back to itself, eliminating the need for a secondary device such as a reflector.

Proactive monitoring of rotating equipment and control systems can increase plant efficiency and reduce unplanned downtime, operating and maintenance costs

Kanban is a visual signal that something needs to be replenished. Lean Manufacturers today use Kanban to drive a process to make, move, or buy the appropriate parts. Thus, Kanban becomes one of the fundamental building blocks of a pull (or consumption based) replenishment system. No card? No Replenishment. Paper kanban intent has efficacy; the reality of cluttered transport routes, overflowing finished goods stores, immense quantities of WIP (work-in-progress) and unscheduled machine downtimes, often make the merits of this lean manufacturing functionality questionable. When there are also frequent complaints about delivery problems, the reality is quite distant from the theory. Poor implementation of kanban is quickly overcome in an e-kanban environment. Sue Via, Senior Project Engineer with TechSolve (www.techsolve.org) suggests that Kanban is only part of the lean process, “Kanban is a higher order concept and many things must be in place before implementation of the concept is feasible. For instance, the foundation of Standard Work, 5S/Visual Management, and Quality at the Source must be in place and functional. All affected processes should go through an initial lean transformation to eliminate waste, establish Flow and initiate a Pull mindset. All processes including equipment must be reliable in order to minimize the inventory requirements.” Two of the primary limitations of a manual (or paper based) Kanban system are data availability and scalability. According to Justin Diana, VP of Datacraft Solutions (www.datacraftsolutions.com), “In a typical manual Kanban implementation, most transactions and orders are placed with faxes and emails and recorded in an Excel spreadsheet. At the end of the day, this information is limited to the individual managing and recording this data. The individuals responsible for growing and improving the process, have limited or no visibility to the data. As the number of parts, suppliers, and cells grow, managing this process only becomes more convoluted.” e-kanban, in contrast, focuses specifically on centralizing and managing all of the mission critical data. Real-time transaction capture and tracking builds a repository of information, ripe for process improvement analysis. Allowing an e-kanban system to handle and manage the collation and reporting of this data helps to remove the element of human error prevalent within a manual kanban system. The difference between kanban (a signal to trigger specific quantities of supplies in a just-in-time system) and e-kanban, is working more efficiently and effectively with a lean process. Blanket Purchase Orders, Internal SuperMarket Consumption Signals Replenishment, and Breeding proactive suppliers are three Direct Benefits of Lean e-Kanban. Justin Diana also suggests that, “One other limitation to a manual kanban system is the unpredictable and undependability of the communication... questions such as did they get it? Do they understand it? Am I going to get it? keep buyers awake at night.” Indeed, e-kanban collaboration erases those fears. Electronic records of pull requests, receipt timestamps and electronic acknowledgements all work towards a more unified and dependable method of pull communication. Via suggests that even e-kanban may have limitation in certain environments: “Electronic kanbans are effective when distance is a factor in the process; such as multiple buildings, locations; however, it may be too time consuming when the handoff points are adjacent or close to each other; such as different departments or processing equipment.” Once the discipline and visual aspect of kanban has been implemented internally, the next logical step is to apply the process externally to outside supplying entities. Lean Manufacturing relies heavily on trusted relationships with those suppliers and pre-negotiated terms of engagement. Through the use of quality certification and blanket (long-term) Purchase Orders, the manufacturer can accurately and effectively calculate the optimal level of inventory needed to fulfill demand requirements through the duration of Replenishment lead time. At the end of the day, effective kanban is the sum of a simple calculation. e-kanban products must provide a steady and predictable demand over a forcastable period, supplied by an entity that provides virtually defect free product in the negotiated period of time in the negotiated quantity at the negotiated price. e-Kanban: Vendor requirements When a relationship is setup with a supplier a service level agreement is defined. Items such as negotiated lead times, packaged quantities, order receipt confirmations, and advanced shipment notices must all spelled out very specifically. An e-kanban system monitors that each of these service level agreements are being met by the supplier in real time. If they are not, a series of alerts and notifications starts to be issued to all interested and affected parties. This gives everyone a chance to adjust their behavior to bring performance back in line in real time. e-kanban also captures all of this real time information and makes it available for historical analysis. It is made available over the internet twenty-four hours a day, so that all parties can see trends in performance. Late shipments, short shipments, and other supply chain performances are all captured and presented in terms of percentage of conformance to the service level agreement. These visuals give everyone in the supply chain information about how to focus their continuous improvement energies. e-Kanban: Only one Lean Manufacturing component e-kanban is heavily based on Lean and Six Sigma principles and tools, and the ability to effectively support a production system is critical to Best Practices. e-kanban is a critical Lean element focused on improving flexibility through the elimination of waste; e-Kanban is focused on quantifying the flexibility so that manufacturers and suppliers can rapidly evaluate the true capability of the system to respond to a specific change. Even a Lean production system could struggle to accurately respond to a new order requirement from a customer because it would take longer to identify the source of the constraint and begin resolving it. Implementing pull systems (e-kanban) with more customers is the increasing direction of manufacturing operations utilizing lean. Via argues that e-kanban only makes sense as part of an overall lean process, “Kanban in conjunction with other Lean concepts focuses on Just-in-Time delivery and the reduction of inventories. An effective kanban system requires that all non-value-added activities be eliminated or reduced in order to shrink the required Lead Times.” ***

With xPC Target Turnkey, users can do virtual design and debugging of machines, production lines and processes and the results will be automatically implemented in real control systems.

Structured cabling in commercial buildings based on TIA/EIA standards has become a common practice in many building automation system applications. Panduit is promoting similar approaches for industrial automation. Jeff Paliga of Panduit answered the following questions about their approach.

The paper, “Nonlinear Control and Decision Making Using Fuzzy Logic in Logix,” provides best practices for designing with fuzzy control and examines its benefits compared to conventional control methods.

The development of fieldbus for safety-related applications and new International and European Standards have fundamentally changed the manner in which safety is now being engineered in the plant. BMW are the first to directly integrate robotic safety functions using a safety-related fieldbus.

Most people consider low price to mean lower margins. This is not necessarily true. A high priced control system may still only generate low margins. And too, low-priced, high value, high volume products could generate healthy margins. The key, of course, is to pursue a balanced value proposition.

A quick examination of how guided-wave technologies compare against other time-of-flight technologies, such as through-air radar and ultrasonic —along with a discussion of application guidelines—can serve to elucidate the benefits that this new technology can bring to engineers needing to improve process operations.

The benefits of Pick-to-Light solutions cannot be overlooked as a best-of-breed, lean manufacturing, continuous process improvement, cost-saving technique. There are extensive benefits of Light-Directed Order Picking. The flexibility of Pick-to-Light technology solutions offer cable-free light module hardware; this flexibility enables the productivity of light-directed order fulfillment to virtually all popular material storage and handling media found in distribution centers and manufacturing plants.

There can be some great lessons learned from professionals when they put their skills and knowledge to work. I saw this when visiting a 34,100 square feet light commercial building where technology and knowhow were applied to create an efficient, sustainable, and productive environment. The building is a notable exception when contrasted with the typical light commercial building built for lowest first cost resulting in high energy cost, extra maintenance, and an uncomfortable environment.