©2026 Automation.com, a subsidiary of the International Society of Automation.
Articles and News
33,445 Results Found
-
Marco TRAC-IT MES helps make airline food
TRAC-IT MES factory floor efficiency system has brought significant improvements to Uniq Prepared Foods’ production facility, where it makes sandwiches and wraps for European airlines. -
Siemens publishes life science solutions design guide
Guide helps consulting engineers and other design professionals create effective, energy-efficient laboratory environments. -
Micromem to supply keyboard circuits to Unotron
Micromem will supply Unotron with approximately five million keyboard circuits that incorporate magnetic sensor technology. -
Emerson acquires GmbH of Gronau, Germany
epro GmbH engineers, manufactures and assembles API 670-compliant protection systems delivered to the process industries worldwide. -
Emerson automates coal gasification plant in Shanghai
Emerson will provide PlantWeb and FOUNDATION fieldbus for the $375 million expansion of the coal gasification plant in Shanghai. -
Lantronix appoints Jeff Kost VP of Worldwide Sales
Prior to Lantronix, Kost was senior vice president and general manager of SanDisk’s Mobile Consumer Solutions Division. -
OPC UA demo to be held at the MatrikonOPC User Group meeting
A multi vendor demonstration of OPC UA connectivity will show how legacy-based products fit into OPC UA based technology through the OPC generic wrapper. -
Red Lion publishes catalog of process control products
Catalog covers protocol conversion, communications, control, data acquisition, panel meters, operator interfaces, signal conditioners, sensors and encoders. -
Honeywell earns ATEX certification for MICRO SWITCH EX Series
EX Series switch products received the International Electrotechnical Commission's Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx). -
ABB to supply System 800xA for power plant in the Netherlands
ABB will supply a complete process control system based on System 800xA Extended Automation and Profibus to E.ON Benelux for a new high-efficiency power plant. -
ABB to supply substations in Algeria
ABB will supply two substations and ten mobile substations to Algeria's state-owned power company, Sonelgaz. -
Rugged Notebook technical note
By EVOC Rugged notebooks can be used for data acquisition, equipment testing, communications, etc. In various kinds of harsh and hostile environments, rugged notebooks can be seen acting as unfailing mobile computing platforms. -
POSITAL receives ODVA certification for EtherNet/IP encoders
OPTOCODE models with EtherNet/IP interfaces are now certified by the Open DeviceNet Vendors Association. -
Wonderware to supply EMI & MES to Chr. Hansen
Chr. Hansen in Denmark selected Wonderware software to manage operations at its facilities worldwide. -
Advantech achieves UL certification for EKI-1000
Serial Device Servers (EKI-1351, 1352, 1521, 1522, and 1524) and Modbus Gateways (EKI-1221, 1222, and 1224) have received UL Class 1, Division 2 (groups A, B, C, and D) certification for use in hazardous locations. -
Bosch Rexroth publishes brochure on technology for wind turbines
Drive & Control Technology for Wind Turbines describes industrial hydraulics technology developed for the wind energy market, including dynamic rotor blade pitch adjustment systems, drive train brakes, yaw drive brakes, gearboxes and more. -
Pro-Face publishes Industrial PC and Open-HMI brochure
Brochure describes standard, mid-range and high performance industrial PCs and Open HMI solutions. -
Yokogawa to supply power plant control systems to Egyptian electricity company
Yokogawa will supply five control systems, plus transmitters and analyzers, for the construction and upgrade of power plants in Egypt. -
Logicamms to deploy MyDIALS performance management software
LogiCamms will use myDIALS software to gain real-time visibility into the operation and performance of remotely located reclaimers, stackers and shiploaders operating in Australian mines and ports. -
ARC says SCADA market for Electric Power to exceed $2.1 Billion
The worldwide market for Electric Power SCADA is expected to grow at a rate of 5.5% over the next five years. The market was $1,629 million in 2008 and is forecast to be over $2,125 million in 2013. -
Autodesk appoints Mark Hawkins Chief Financial Officer
Hawkins comes to Autodesk from Logitech International where he has been CFO and senior vice president of finance and IT since 2006. -
Mike Hyslop Joins Jacobs Automation
Mike formerly worked as the President of the Motion Competency Center and Berger Lahr Motion Technology – both Schneider Electric Companies. -
WAGO updates ProServe product development software
ProServe 5.2 has an array of diagnostic tools that allows the user to define input and output loads as well as to check potential current and compatibility. -
ABB announces Industrial Boiler Optimization service
The service combines diagnosis, implementation and sustaining services to garner and maintain energy cost savings, enhanced boiler performance efficiency, safety and reliability. -
ABB announces optimization service for paper industry
Cross Direction Control Optimization Services combine diagnosis, implementation and sustaining services to improve and maintain profile performance of the paper sheet. -
ABB wins $490-million oil and gas order in Algeria
The project consists primarily of design and installation of pipelines, field gathering stations, gas distribution manifolds and flowlines/trunklines -
ASI publishes power supply brochure
Brochure covers compact, space saving, two and three phase, and specialty power supplies. -
EVOC to open headquarters and service centers in Germany
EVOC signed a Joint Declaration of Economic Cooperation with the State of North Rhine-Westphalia, Germany. EVOC will set up its German headquarters in Dusseldorf in April 2009. -
Allied lets you see and order parts on a cell phone
Allied Electronics launched a mobile site, giving engineers and purchasers access to products from anywhere through a cell phone. -
ABB announces Motor Performance Management service
MPM is a performance-based partnership where ABB assumes responsibility for managing a customer’s entire motor maintenance function, including ABB and third-party electrical motors.
