©2026 Automation.com, a subsidiary of the International Society of Automation.
-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Automation Quiz
Test your knowledge of the automation industry with questions from ISA certification programs.
250 Results Found
-
FeatureAutoQuiz: Why Must Voltage Be Reduced Along with Frequency in a Variable Frequency Speed Controller?
To maintain a constant (rated) flux density, the applied voltage must also be changed in the same proportion as the frequency (per Faraday’s law). -
FeatureAutoQuiz: What Process Confirms That a Company Meets the Needs of Customers and Complies With Statutory and Regulatory Requirements?
ISO 9000 is a family of international quality management systems standards designed to help organizations ensure that they meet the needs of customers and other stakeholders while meeting statutory an -
Feature
AutoQuiz: What is “Slip” in an AC Induction Motor?
Slip is usually expressed as a percentage, and varies by motor, from nominally 0.5 percent for very large motors to about 5 percent for small, specialized motors.. -
Feature
AutoQuiz: What Factors Affect the Reynolds Number for a Flowing Fluid?
The Reynolds Number for a flowing fluid can be generalized as the ratio of kinetic (or inertial) forces divided by viscous forces. -
FeatureAutoQuiz: Identify Three Levels Within the Manufacturing Computer Systems Hierarchy
The manufacturing computer systems hierarchy is defined in ISA-88 and ISA-95 by Level 0 through Level 4. -
FeatureAutoQuiz: What Are the Limitations of an Analog Multimeter?
An analog voltmeter works by passing a current through a coil that is suspended between two permanent magnets. -
FeatureAutoQuiz: How Are the Maintainability and Maintenance of Automation Systems Related?
Maintainability is the probability that a device will be restored to an operating condition within a specified period when maintenance is done with prescribed resources and procedures. -
FeatureAutoQuiz: How to Use the Parity System to Detect Data Transmission Errors
Parity is a simple method using a binary code (“1” or “0”) to detect data transmission errors by making the sum of the “1” bits in the source data either an odd or an even number. -
FeatureAutoQuiz: What Electrical Event Can Occur With a 24 VDC Open-Collector Output Sinking Configuration?
An NPN (sinking) open-collector, when “energized,” switches the load side of the relay (at terminal “A”) to ground (terminal “B”). -
FeatureAutoQuiz: What Device Is Used to Convert an Analog Signal From a Transmitter to the Signal Required by a Digital Controller?
A digital controller requires a digital signal as its input. A 4-20 mA transmitter outputs an analog signal. Therefore, a device to convert an analog (A) signal to a digital (D) is required.