©2026 Automation.com, a subsidiary of the International Society of Automation.
-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Automation Quiz
Test your knowledge of the automation industry with questions from ISA certification programs.
250 Results Found
-
FeatureAutoQuiz: Why Must Voltage Be Reduced Along with Frequency in a Variable Frequency Speed Controller?
To maintain a constant (rated) flux density, the applied voltage must also be changed in the same proportion as the frequency (per Faraday’s law). -
FeatureAutoQuiz: What Process Confirms That a Company Meets the Needs of Customers and Complies With Statutory and Regulatory Requirements?
ISO 9000 is a family of international quality management systems standards designed to help organizations ensure that they meet the needs of customers and other stakeholders while meeting statutory an -
Feature
AutoQuiz: What is “Slip” in an AC Induction Motor?
Slip is usually expressed as a percentage, and varies by motor, from nominally 0.5 percent for very large motors to about 5 percent for small, specialized motors.. -
Feature
AutoQuiz: What Factors Affect the Reynolds Number for a Flowing Fluid?
The Reynolds Number for a flowing fluid can be generalized as the ratio of kinetic (or inertial) forces divided by viscous forces. -
FeatureAutoQuiz: Identify Three Levels Within the Manufacturing Computer Systems Hierarchy
The manufacturing computer systems hierarchy is defined in ISA-88 and ISA-95 by Level 0 through Level 4. -
FeatureAutoQuiz: What Are the Limitations of an Analog Multimeter?
An analog voltmeter works by passing a current through a coil that is suspended between two permanent magnets. -
FeatureAutoQuiz: How Are the Maintainability and Maintenance of Automation Systems Related?
Maintainability is the probability that a device will be restored to an operating condition within a specified period when maintenance is done with prescribed resources and procedures. -
FeatureAutoQuiz: How to Use the Parity System to Detect Data Transmission Errors
Parity is a simple method using a binary code (“1” or “0”) to detect data transmission errors by making the sum of the “1” bits in the source data either an odd or an even number. -
FeatureAutoQuiz: What Electrical Event Can Occur With a 24 VDC Open-Collector Output Sinking Configuration?
An NPN (sinking) open-collector, when “energized,” switches the load side of the relay (at terminal “A”) to ground (terminal “B”). -
FeatureAutoQuiz: What Device Is Used to Convert an Analog Signal From a Transmitter to the Signal Required by a Digital Controller?
A digital controller requires a digital signal as its input. A 4-20 mA transmitter outputs an analog signal. Therefore, a device to convert an analog (A) signal to a digital (D) is required. -
FeatureAutoQuiz: What Are the NPV and IRR Methods for Evaluating Industrial Automation System Capital Investments?
Net present value (NPV) by itself is not a good indicator of the viability of a project or a good differentiator between two competing projects. -
Feature
AutoQuiz: What Is the Logical Analysis Troubleshooting Method for an Industrial Process?
Once a problem is identified in an industrial process, data must be gathered and analyzed to determine a viable set of potential actions and solutions. -
Feature
AutoQuiz: What Should an Engineer Include in a Final Automation Project Report to Senior Management?
An executive summary and bullet-item lists for an automation project allows managers them to understand the basic outcomes and conclusions of your project. -
FeatureAutoQuiz: What Is the Purpose of an Instrument Location Plan?
Instrument location plans are most often used to support new plant installations and give the installer information about the actual physical location of the installation of an instrument. -
FeatureAutoQuiz: What Is the Significance of the Fieldbus Intrinsic Safety Concept?
The fieldbus intrinsic safety concept simplifies the rules governing energy storage in field cables and makes more power available to the fieldbus trunk. -
Feature
AutoQuiz: Which Valve Actuation Method Is Best for a Very Large Force and a Small Actuator?
Hydraulic actuators are driven by a high-pressure fluid (up to 4,000 psig) that can be delivered to the actuator by a pump that is remote from the actuator itself. -
Feature
AutoQuiz: What Are the Benefits of Self-Study Workbooks for Operator Training?
Self-study workbooks ensure that all students have been exposed to the same learning objectives and material. -
Feature
AutoQuiz: How are Pressure Changes Measured in Industrial Applications?
For most pressure applications, changes in pressure are detected by the change in deflection of a measuring diaphragm. -
FeatureAutoQuiz: What Are the Cybersecurity Risks to a Geothermal Plant?
Automation systems are vulnerable to many cybersecurity risks, but email viruses pose the least risk to disrupt operations and create an emergency situation. -
FeatureAutoQuiz: Technical Characteristics of the Open Systems Interconnection Model
The presentation layer for protocols used in control systems provides the translation of data received into a usable format, such as binary data from a programmable logic controller into floating poin -
FeatureAutoQuiz: How to Install Thermocouple Extension Wires
Proper installation of thermocouple extension wires requires special terminal blocks to prevent additional junctions from being formed. -
FeatureAutoQuiz: How Are Errors Corrected in Industrial Network Data Communications?
Cyclic redundancy checking is a method of checking for errors in data that has been transmitted on a communications link. -
FeatureAutoQuiz: How to Calibrate a High-Range Electronic Pressure Transmitter
A dead-weight tester apparatus uses known traceable weights to apply pressure to a fluid for checking the accuracy of readings from a pressure gauge or pressure transmitter. -
Feature
AutoQuiz: What Is Receipt Verification in Industrial Processes?
Receipt verification is an industrial systematic process by which a site verifies that what was specified and ordered is actually what is received. -
Feature
AutoQuiz: What Industrial Troubleshooting Technique Can Help Replace a Bad Component?
The substitution method may reveal the component that is the cause of the problem. -
Feature
AutoQuiz: What is a Database Record?
A database record is a single row of information in a table. -
FeatureAutoQuiz: Characteristics of an Industrial Controller
For a direct-acting controller, the resulting output movement is in the same direction as the movement of the process variable. -
FeatureAutoQuiz: When Does Cavitation Occur in Liquid Flow?
In cavitation, when the liquid drops below the vapor pressure around the vena cava, the liquid vaporizes. -
Feature
AutoQuiz: What Happens When a Reset Action Is Added to an Industrial Controller Tuned for a Fast Control Loop?
Both gain and reset (integral action) act upon the error in the same direction, per a simplified proportional, integral, derivative (PID) control algorithm. -
FeatureAutoQuiz: What is the Risk in Using Standard ROI Ratios to Invest in an Automation System?
ROI equations do not account for lost opportunity to collect investment interest on money diverted to fund an automation project or the time value of money. -
FeatureAutoQuiz: How to Calculate Steady State Gain for a Standard Pneumatic Instrument Loop
Gain is defined in industrial control theory as the change in input divided by the change in output. -
Feature
AutoQuiz: What Are Common Terms Used to Quantify Dangerous Industrial Failures?
Spurious trips and nuisance trips are indicative of “safe” failure modes, not “dangerous” failures. -
FeatureAutoQuiz: How to Measure the Resistance in a Circuit
Resistance is an electrical quantity that measures how a device or material reduces the electric current flow through it. -
FeatureAutoQuiz: How to Calculate Uptime for an Automation System
The most important measure for production equipment support is operational availability, or “uptime.” -
FeatureAutoQuiz: How to Troubleshoot a System Failure Due to a Bad Component
Troubleshooting is often an iterative process. If the proposed solution is not the correct one, further analysis and data collection are warranted. -
FeatureAutoQuiz: What Is the Purpose of a Markov Model Computation?
Systems that exhibit a Markov property are ones in which the future does not depend on the past. -
Feature
AutoQuiz: Characteristics of a Loop Diagram
Instrument loop diagrams are very detailed depictions of an industrial control or process -
Feature
AutoQuiz: Characteristics of a Fuzzy Logic Controller
A PI controller is tuned by adjusting gain or proportional band & integral time settings. Fuzzy logic controller is tuned by adjusting scale factors. -
FeatureAutoQuiz: What Is the Best Method for Measuring the Level of a Highly Corrosive Media?
Ultrasonic level detectors use the principle of reflection of an acoustic wave from liquid to vapor phase and vapor to liquid phase. -
FeatureAutoQuiz: Which Signal Type Indicates Direction and Velocity in a Motion Control Application?
To indicate both direction & velocity, a signal with both positive and negative characteristics is required. Motion controls use either ±10 V or ±5 V signals to accomplish this. -
Feature
AutoQuiz: What Type of Switch Is Designed to Detect the End of Travel of a Valve?
Limit switch is a general term to describe the class of devices that are used to detect the end of travel of a valve, louver, or any other item that may be in motion. -
Feature
AutoQuiz: What Is the Benefit of Industrial RFID Tags Over Barcode Systems?
RFID tags consist of silicon chips and an antenna that can transmit data to a wireless receiver. -
Feature
AutoQuiz: When Should Operating Instructions Be Developed for an Industrial Process?
Operating instructions may be included in a functional specification or operating description and may range from a few pages describing how to operate one part of a plant to a complete set of directio -
FeatureAutoQuiz: Cold Junction Compensation Is Required for Which Type of Temperature Measurement Device?
A thermocouple is comprised of two wires of dissimilar metals, connected at one end, which is placed in the process to be measured. This is called the measuring junction. -
FeatureAutoQuiz: What Security Property Is Affected If a Hacker Intercepts and Changes Set Point Data?
Data integrity implies that the data received is the same (value, format, quality) as the data sent. -
Feature
AutoQuiz: What Is a Schematic Representation of a Complete Hydraulic, Electric, Magnetic, or Pneumatic Circuit Called?
A loop diagram shows complete details of a hydraulic, electric, magnetic, or pneumatic circuit, showing all of the interconnections, components, and devices that participate in that circuit. -
Feature
AutoQuiz: What Is the Fastest "Electronic" Method to Bring a DC Motor to a Full Stop?
In regenerative braking, all of the motor's energy is fed directly back into the AC power line. -
FeatureAutoQuiz: Unique Feature of a Pneumatic Differential Pressure Sensor/Transmitter
In a pneumatic transmitter, the nozzle faces a baffle, so, as the measured pressure increases, the baffle moves toward the nozzle. -
FeatureAutoQuiz: What Is the Definition of Restore Time in Industrial Maintenance?
The restore time includes all activities required to diagnose and repair the device. This includes diagnosing the problem, isolating the device from the system, traveling to the device, and repairing -
Feature
AutoQuiz: What Is the Condition When Controller Output Increases in Conjunction With a Controlled Variable Increase?
As pressure increases (controlled variable), the valve output would increase to open the valve in order to relieve the pressure.