Industry Products

IV7C can read RFID tags anywhere within reach of a forklift. It can be configured to read multiple air interface protocols in mixed populations of tags, including EPC UHF Generation 2 (Gen 2) and ISO 18000-6b and 6c. It is both ETSI and FCC certified and RoHS compliant.

The EM-9360 is a low power SBC that offers a cost-effective solution for users requiring legacy feature support, low power and a small footprint. System designers can build on the EM-9360 with the confidence of guaranteed supply until 2010.

7/16 DIN connectors for LMR-600 cable include RFD-1600-2L2, which attaches to the cable with a solder/clamp method, and RFD-1505-2L-2, which attaches with a crimp/solder method. 7/16 DIN connectors are large format 50 ohm interfaces designed for high power wireless telecom applications.

IDENT Control RFID product identification and data collection solution is now available as a 13.56 MHz (HF) system. This transmission frequency enables more data to be transmitted faster making it possible to read large amounts of data on the fly. The system supports DeviceNet, Ethernet, and PROFIBUS protocols, as well as RS232 serial communication.

Enhancements include increased power, speed and expanded communication capabilities. An embedded communications port and Web server give users access to control information for real-time data sharing with OEM partners, remote maintenance engineers and personnel.

TES-5 Series of low profile, surface mount dc/dc converters offer 5W of power and a 2:1 input range of 9-18VDC, 18-36VDC, or 36-75VDC with single or dual outputs. Input to output isolation is 1500VDC. It has short circuit protection, remote on/off, operating temperature of -40ºC to +85ºC, with full load achieved up to +71ºC.

The E3000 Series incorporates 3-phase brushless DC motors for smooth rotation, high power, maximum speed of 60,000 rpm; and maximum power of 350W. The modular motors can be connected with a wide variety of Ultra-Precision spindles, straight, short length, 5 different 90° Angle Types, quick tool change and direct chucking, air release collet ATC types.

The active front-end devices in the b maXX 4100 series make energy regeneration possible in any servo system. Regenerative converters are effective on large machine tools or grinding machines, and machines running in reversing duty, where sudden acceleration followed by deceleration is typical.

MZ2Q Magnetic Cylinder Sensor has two programmable switching points. It can be taught to detect beginning stroke (retracted) and end stroke (extended) positions over a 2-in. (50 mm) stroke size. The sensor, which offers an IP 67 enclosure rating, can be completely recessed in the T-slot.

The 4A Relay Output module provides 16 Form A relays for controlling output loads, such as motor starters, solenoids, and indicators. Each output point is isolated, and each has a separate common power output terminal. Outputs provide a high degree of noise immunity, minimizing the need to add external snubbers.