Industry Products

CRDV/S drain valve combines an electronic sensor with a solid-state integrated logic analysis circuit to determine the exact amount of time necessary to empty condensate from a pneumatic system.

Ethernet Powerlink Safety Technology is independent of the transport protocol, and is completely compatible with other fieldbus solutions such as CANopen. All safety-oriented mechanisms, which are open and available, are implemented in the data transfer process so that safety-relevant data can be transferred over a standard fieldbus. With this solution, safety functionality is completely integrated in the control system and does not require special cabling.

Micro Motion F-Series Coriolis flowmeter is available with Hastelloy C-22 construction, making it suitable for use in corrosive applications where the process fluid is incompatible with stainless steel.

The GF90 Insertion and GF92 Inline Mass Flow Meters have received ATEX approval for use in potentially explosive environments classified as EExd IIC T4.

T-LSR series of computer controlled motorized linear stages offer travel up to 300mm, loads up to 20kg, speeds up to 20mm/s and 0.25 um resolution. Stages may be mounted in x-y or x-y-z configurations without any additional hardware.

PC/104 utility boards have 48 individually optically isolated digital inputs, making them suitable for use in control and instrumentation applications where high-voltage protection is required. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others. Price: $349.

CSB and CSW series DIN rail mounted power supplies operate using only 2 legs of a 3-phase circuit, thereby saving space, cabling and circuit protection costs. The CSB series has a universal input of 340-550 Vac, whereas the CSW series has a universal input of 185-550 Vac in both single and 2-phase.

FFM-202I is optimized for use with incoherent instruments such as FTIR or diode array spectrometers. It employs an extremely robust clean-in-place design allowing a high degree of up-time even in the event of upset conditions such as those often encountered in process gas or dryer solvent off-gas monitoring, where upset conditions may occasionally coat the interior of the cell with powders or other contaminants.

SNAP Motion Control Subsystem offers a cohesive development platform for applications that require motion control along with analog, digital, and serial control. The system combines a SNAP Motion host communication module in a SNAP I/O form factor, a SNAP Motion breakout board, and the OptoMotion command library.

Symbion-DX and Symbion-RX Version 1.2.software for application development, networking, and on-line monitoring of process analytical technology adds several new capabilities, including a significantly expanded library of mathematical functions.