Industry Products

DiProPAC 32 die protection module for the SmartPAC 2 press automation control provides inputs for up to thirty-two sensors. An 8-sensor module is also available. It generates a detailed message whenever a sensor fault occurs, providing the name of the sensor, the sensor type, the nature of the fault (early, late, missed, etc.), and the angle at which the fault occurred.

SR61 is available with a choice of scanning options: standard range area imager, MEMS laser or linear scanning. The SR61 allows companies to standardize on a single form factor and choose the scanning technology that best suits their application needs, from low-light environments to highly dense or difficult to read barcodes.

This one-window test tool requires little to no training so technicians and system integrators can use their time more effectively. A simple explanation on how Modbus works on their website is a handy reference that includes examples of the various commands and replies.

SeaDAC PLC-16H digital I/O module combines high-current Form C outputs and optically isolated inputs. It has eight SPDT high-current Form C relays that can directly switch up to 6A loads at 250VAC and 100VDC. Additionally, eight non-polarized inputs can monitor 5-30VDC and provide optical isolation to protect the host computer and other sensitive equipment from voltage transients.

Flexi safety-rated controller provides configurable logic without using any software. Users can realize the benefits of integrated safety logic without using a computer to program the device, saving time and simplifying setup. Logic is implemented with rotary switches on the front of each module. Logical combinations with multiple modules are easily set based on how the modules are combined.

The mini-IPm PLUS has Ethernet, up to 4 serial ports and a built-in mix of 26 discrete and analog I/O. It is pre-loaded with open-source Linux and the IPm firmware which offers automation, control and data acquisition capabilities. For utility applications, IPm+ also includes pre-loaded software for AGA gas flow calculations and DNP-3 time stamped communications.

The new Series NL1 mini air preparation units from Rexroth are fully modular and customizable. The units are easy to assemble (without tools), and easy to install and maintain. Series NL1 features transparent polycarbonate and solid metal bowls, and a choice of 1/8” or ¼” NPT ports. Series NL1 complements the Series AS2 and AS3 (1/4 to ½ ports) family of FRLs.

Q45S provides continuous monitoring of H2S (hydrogen sulphide) in wet conditions. A flexible monitoring capability allows measurements to be made either at the inlet to scrubber systems, where concentrations can run as high as 200 PPM, or at the outlet, where concentrations are ideally below 0.5 PPM. Special sensor configurations are also available for either duct insertion or flowcell use.

The encoder module incorporates a lensed LED light source and monolithic photodetector array with signal shaping electronics to produce the two channel bounceless TTL outputs. The internal monolithic electronic module converts the real-time position, speed, and direction into TTL compatible outputs.

The xCoupler module snaps into a ControlLogix PAC (programmable automation controller) from Rockwell Automation and provides bi-directional data translation between plant floor devices and SQL Server 2005 databases connected to the module via Ethernet. The module can be set up to configure specific plant floor devices, such as robots, sensors, bar code scanners and controls, with a database to develop commands, reports, alerts and other instructions.