Industry Products

With a current rating up to 15 amps at 300 volts and a wiring capacity of 30 to 14 AWG, these micro miniature terminal blocks are available in single level, multiple wire and dual level designs. The ASIMT, ASIMTQUATTRO and ASIMTTB are very small terminal blocks that are mounted on the 15mm DIN rail and are ideal for applications where space in the enclosure is limited in all directions.

Deltran AKB series brakes are available in diameters from 1.83 to 5.00 in. and provide static engagement with torque from 12.5 lb-in to 470 lb-in. These brakes are simple to install and provide a safe, cost-effective and energy efficient braking solution in applications such as robotics, medical equipment, actuators, motor brakes, postal handling equipment and packaging.

The ET-16MS offers 16 auto-detecting 10/100 ports that support auto-negotiating (10/100 or 10/100/1000), auto-crossover, and auto-polarity for plug & play connections. The ET-18MG has the same ports plus 2 Gigabit combination ports that support copper and fiber connections up to 80+ km. These products share the same compact footprint as SIXNET's ET-9MS & ET-9MG Industrial Ethernet Switches.

EP812 low power EPIC form factor SBC supports Socket 478 for Intel Pentium M and Intel Celeron M processors running at 400MHz FSB speeds for convenient logistic and better CPU performance. The EP812 features a DVI-I display function for dual external display applications, such as Digital Signage.

USBscope50, in combination with the LabVIEW and an Agilent VEE driver, converts a PC into a one-channel scope. It can be stacked with other USBscope50s to make a multi-channel solution. In this configuration, each module shares its phase and trigger status with the other modules in the stack ensuring tight channel-to-channel matching and concurrent trigger.

Retriever Series 10/100TX to 100FX Industrial fiber converters are available in five models. RUE-110 Series supports both half- and full-duplex modes with auto-negotiation function. The fiber port of RUE-110 Series uses a SC or ST connector. Multimode models RUE-111 and RUE-112 can support distance up to 2 km and single-mode models RUE-113 and RUE-114 can support distance up to 30 km.

The SM2315DT incorporates a Servo Motor, Amplifier, and Motion Controller into the same integral frame. It has an 8-pole compact rotor with higher copper filling factor that can generate two times (2X) more continuous torque than the company's previous model. It delivers 112 oz-in of peak torque while maintaining 57 oz-in of continuous torque with a maximum speed capability of 4700 rpm.

Accepting any 24 Volt DC source including battery power, No. MMP-TM55-24V GP52-079 reversible gearmotor is rated for 80 in-lb continuous torque at 58 RPM, and 448 in.-lb Peak. The motor measures 2.14” in Diameter, by 7.7” long, and has a keyed output shaft of 12mm diameter by 25mm long.

Stan-Cor MK Series non-metallic centrifugal pumps offer maximum chemical resistance and feature hydraulically-balanced operation to reduce bearing failures by eliminating thrust loads. They are easy to assemble, and are available in three sizes with 60Hz operation at up to 3500 rpm and 330 gpm, and 50Hz operation at up to 2900 rpm and 62 M3/H.

Model USB-IIRO4-2SM dense multifunction device incorporates four optically isolated digital inputs, four Form C (SPDT) electromechanical relay outputs, and two RS-232/422/485 serial communication ports, packaged in a small, rugged, industrial enclosure. This USB device is an ideal solution for adding portable, easy-to-install, digital and serial capabilities to any PC or embedded system with a USB port.