Industry Products

DT10, DT20, DMT10-2 and DML40-2 Distance Measurement Sensors allow customers to upgrade from simple detection to measurement applications where previously space and budget made it prohibitive.

Surge protection and wiring device products include surge panels, plugs, connectors and receptacles. 74000 and 75000 Series Surge Panels designed for facilities with 3-phase WYE-configured (4-wire + ground) systems where surge protection for all seven modes in the AC distribution network is required. Industrial Grade Black and White Locking Plugs and Connectors are available in 15, 20 and 30 Amp versions.

WebPort 2005 and WebPort 4005 industrial Ethernet gateway modules securely link serial devices or PLCs to an Ethernet LAN, allowing data access from any workstation. It connects up to four Ethernet-enabled control devices, offers serial connectivity to another controller, a modem for remote maintenance, and a WAN Ethernet port for connecting to the Internet or any IP network.

FieldPort FPIO-I8H-EIP and FPIO-I8H-EIP modules provide full analog capability, HART (Highway Addressable Remote Transducer) protocol, Ethernet-IP and ModbusTCP system interfaces, and work with Rockwell Automation and Schneider Electric Legacy PLCs.

Active Sensor Actuator Interfaces (SAIs) provide users with greater levels of wiring flexibility for achieving modular and decentralized process control in automation applications. The Active SAIs are available in IP 67 housings and support all industry network protocols including Profibus, DeviceNet and CANopen, as well as Ethernet, Ethernet/IP, PROFINET and Modbus/TCP.

The PCI-1625U is a self-contained computer with an onboard DSP processor that will take over the processing load from the host PC. It is designed for industrial applications where a PC needs to communicate with terminals, modems, or other instruments. A user can install up to four cards for total of 32 ports in any PCI bus-based PC.

DataBus IndustrialTuff PROFIBUS DP and PA shielded twisted pair cables deliver high performance and reliability in PROFIBUS factory automation and process automation applications. Cables are available with a selection of special jacket compounds, cable colors, and armoring options to fit application requirements.

TiR Series IR imagers help expert users accurately pinpoint building problems by combining both visible light and thermal images for better identification, analysis and image management. It has a 20 mm germanium lens on a 180 degree articulating mount to view images, even in situations where access is limited.

Ti Series thermal imagers are available in six camera models – the Ti20, Ti30, Ti40, Ti45, Ti50 and Ti55 – designed both for technicians with little or no thermography experience, and for predictive maintenance experts, process engineers and consultants who require the best thermal imagers.

DryLin ZLW is a lightweight, toothed-belt linear drive equipped with a hard-anodized aluminum profile, a DryLin W compact linear guide, and iglide plastic sliding elements. This provides a maintenance-free, self-lubricating, lightweight actuator for a linear drive system.