Industry Products

IndustrialTuff Variable Frequency Drive (VFD) Cables, designed to carry power from AC drive systems to AC motors, now includes four new 10 to 16 AWG, 600V UL 1277 cables incorporating a signal pair for brake applications. The cables feature an overall Beldfoil shield plus 85 percent TC braid shield for highly effective radiated and conducted noise protection.

Rack-mounted IndraMotion MTX compact provides high performance in a very small footprint while improving machine cycle times and part quality. It controls up to eight axes in two NC channels with a fast IndraLogic PLC. It can process up to 200 NC blocks per second and has a 30 block look-ahead rate to achieve shorter machine cycle times.

Model 2600-001-006/7 Tip-Seal dispense valve consists of a double-acting actuator, a 13.7” (350 mm) long extension nozzle and a carbide Tip-Seal needle to prevent dripping fluid material at shut-off. For high-volume fluid transfer, the Tip-Seal Valve can flow up to 6 gpm (22.7 lpm). For filling housings, containers and vessels, the optional level-sensing probe and controller can automatically stop flow when the desired fluid level is reached.

MENU for iFIX is a complete navigation system add-on for the Proficy iFIX control system from GE Fanuc. Navigation using MENU is immediately intuitive, with familiar functions like Back, Forward, Favorites and Home as standard. Users can add navigation links to standard iFIX functions like Workspace configure, Database Manager and Mission Control.

DataTuff Industrial Ethernet cables now include three new Enhanced 4-Pair, Category 5e Twisted Pair cables. Two are Low Smoke Zero Halogen, Unshielded, Enhanced Cat 5e cables, whle the other is a Waterblocked/Burial, Shielded Enhanced Cat 5e cable.

LabVIEW drivers for wireless sensor networks give engineers the ability to integrate ZigBee, IEEE 802.15.4 or proprietary wireless sensors into LabVIEW. The free driver software works with sensors from three wireless-sensing leaders – Accsense, Accutech and Crossbow Technology – and includes communication functions and example programs compatible with sensors from each vendor.

C-Series Core Sensor has a three-wire option that offers an alternative to high-cost sealed cables by replacing the connector and cover with three discrete wires that allow sealing against the wire insulation instead of a cable jacket. A simple grommet can then be used to provide tight water sealing.

NI Vision Builder for Automated Inspection (AI) Version 3.0 has a state-machine process model that gives engineers one of the most flexible environments available for configuring vision systems. With this process model, engineers can customize the execution flow of their inspections to meet a wide variety of machine vision challenges, from component alignment to part inspection and verification.

MPN series of brushless servo motors replace the now-obsolete N-Series motors recently discontinued by Rockwell Automation/Allen-Bradley. The MPN offers more torque per frame size than the existing N-Series motors.

Allen-Bradley CENTERLINE 2100 motor control center (MCC) ArcShield option helps reduce arc flash hazards while providing users with increased protection against internal electrical arcs. This version of the CENTERLINE 2100 MCC from Rockwell Automation provides arc flash protection in a low-voltage MCC (up to 600 volts).