Industry Products

The MR314 encoder works in a wide range of harsh and/or hazardous environments, incluidng temperatures of -60°C/+150°C). It is intrinsically safe and ATEX-compliant, immune to EMI/RFI and ground loops, unaffected by high magnetic fields, and radiation resistant. Special versions can be easily engineered for thermal-vac environments.

PANEL6173 has a 17-inch high brightness SXGA LCD display, NEMA4/IP65 compliant front bezel, and an ultra slim design. The TFT LCD offers great luminance at 300cd/m² and has a contrast ratio of 500:1. The industrial flat panel monitor is especially suited for the POI/KIOSK market and HMI (Human Machine Interface) solutions.

The mass memory media are extremely robust and can be obtained in the industrial grade version with 64 MB to 4 GB memory capacity. All data, ranging from the operating system to the application and data records, are stored there. If separate areas for application and data are required on the mass media, this is done with a combination of two CompactFlash cards.

The MBT Multifunction Block Timer enables users to reduce their component inventories by stocking one timer for a variety of mobile, industrial and automation applications. At just 77mm x 51mm x 13mm in size, the MBT is a full featured all-in-one timer featuring 12 modes of operation and a multitude of logic function possibilities.

Bristol ControlWave ExpressPAC is a highly integrated pre-engineered package solution that combines the new ControlWave Express RTU with a variety of options commonly required in SCADA applications. ControlWave combines the best technologies provided by PLC, RTU and automation architectures into a Hybrid system well suited to remote applications in the energy, water, and wastewater industries.

Utilizing a single wireless link, MDS NETio carries payload data from serial and IP devices along with the analog and discrete signals. It also supports direct protocol addressability of connected I/O from a library of industrial protocols, including MODBUS RTU, DF1, MODBUS TCP, DNP3 or EtherNet/IP.

TCI's Analyzer software provides accurate estimations of current and voltage harmonic distortion under varying supply and filtering conditions. Compliance indicators let you know if your project meets IEEE 519-1992 standards. You'll also have the ability to display a representation of Table 10.3 of IEEE 519-1992, from the menu and button bar.

JetNet 3705 supports 802.3af Power Over Ethernet technology that enables network devices to be powered over the network-cabling infrastructure. With 15.4W full power delivery for each of the 4 PoE ports, JetNet 3705 removes the need for separate power and data-cable infrastructure and costly AC outlets near cameras. Furthermore, it allows the removal of the electricians from the installation team.

The EC-S2 individually monitors one or two read heads to provide a category 4 system. The unit may be combined with an EC-S4 Control Unit to guard applications with up to six doors while continuing to satisfy category 4 requirements according to EN954-1. These units are CE marked, BG approved, and UL and C-UL listed.

The EZ 5015 spring cage contact power connector requires no special skills or tools. Only a standard screwdriver is needed to fit the cable onto the connector. After having stripped the wire, a simple three-step process is carried out: insertion of the screw driver (as shown in the diagram), followed by the wire and the removal of the screw driver to create a secure connection.