Industry Products

Cannon PHD line of optical interconnects delivers high performance, high density, and ease of maintenance. Based on an industry-standard 1.25mm ceramic ferrule, the Cannon PHD system enables a higher density optical system than traditional SC, ST or MC ferrule technologies.

The new package will allow customers to integrate robots into any Injection molding machine (IMM) from 100 to 6000 tons with less installation and engineering time. The standardized package is designed for any KUKA robot being used for part removal. The package includes an SPI interface between the IMM and the robot, a Festo DeviceNet Valve stack with vacuum generators, energy supply and pneumatic tubing from the base of the robot to the 6th axis faceplate.

The new accessory is a locking lever that can be added to the circuit breaker after installation for those applications that require lockout/tagout. It allows the circuit breaker to be locked in either the open or the closed position. When in place, the lockout accessory does not impede the ability of the circuit breaker to trip.

The new warning labels meet NEC/NFPA requirements for field marking switchboards, panelboards, motor control centers, and more. The new training aids, which include a poster, sign, label, wallet card, and work permit, are designed to promote safe, compliant electrical work practices, reducing accidents and injuries.

The ADAM-6520I supports a wide operating temperature range from -40°C to 85°C, supports full/half duplex flow control with auto-negotiation, provides broadcast storm protection, and has 3,000 VDC surge protection for the power line.

These SensorLex modules accept high level voltage inputs from a process control system, then isolate, filter, and boost the resulting signal, providing a high-level analog voltage or current output. Available models provide a wide range of input voltage ranges, which translates into a wide range of outputs.

These compact junction boxes, available in 4 or 8-port with single or dual output, require less space and offer multiple home run connector and integral cable options to provide easy and cost efficient wiring consolidation. PVC, PUR and TPE cable jackets provide flexibility for use in numerous environmental conditions, and home run connectors can be mounted on the top or side of the housing. Integral cables with a 12-pin, 1 1/8-16UN minifast ® connector are also available for single output junction boxes.

GOT-1640T fanless touch panel computer is designed particularly for heavy-duty environments. The GOT-1640T is equipped with a 6.4" TFT LCD display and low power consumption VIA Eden 1GHz CPU. With a cut-out dimension of only 200mm x 150mm, the GOT-1640T works in imited space environments and has been approved for shock and vibration tests at 1.3G in operating mode with HDD’s.

A high-density, redundant fieldbus power supply, the F800 uses 8-channel power supply modules in a redundant format on a passive base. With up to 50% space saving over existing fieldbus power supplies, the highest levels of system availability are achieved by eliminating all single points of failure.

The SmartMotion RX controller bundle features AdeptVision, multiple-robot support and programming tools such as Adept DeskTop 4.0 and the T1 Pendant.