Industry Products

For use with both medium and large Fisher sliding-stem control valves, the 685 actuator is suitable for general, severe, and critical service applications.

40 A QUINT buffer module provides standby power for short-term losses of power without the need for maintenance.

8 Channel Data Logger TC 800D FEATURES: ◾Used latest micro controller based technology for better accuracy. ◾8 Channel fixed input for all thermocouple, J,K,R,S,T,E,B, N programmable by users & RTD (PT-100), 4-20mA, 0-10 VDC factory settable. ◾Easy on-line field calibration by front panel membrane keypad ◾Field programmable channel scan time 1 to 59 sec., Logging interval 1 to 9999 sec & Printing Interval 5 to 9999 sec. ◾Field programmable Delay time 1 to 99 sec. for Relay Output ◾Optional RS-232 / RS-485 Modbus Serial Port ◾Optional Parallel / USB Printing Port APPLICATIONS: ◾ISO Certification records, Validation process certifying ◾Pharmaceutical process validation with graph & excel report in Autoclaves ◾Online profile recording for Oven & BOD, Incubator, Humidity Chamber ◾Winding temperature of generators, Bearings, motors, transformers ◾To know heat Profile in furnace, foundries for Heat treatment application ◾Primary & auxiliary temperature scanning of boiler ◾Chemical & Hazardous area where data monitoring is essential ◾Room Mapping in Pharmaceutical

Series 30i/31i-L Model B CNC high-speed laser control has Ethernet and Ethernet/IP field bus options and FANUC NCGuide simulation software.

K30 Touch button provides simple, precise performance, easily changing from green to red with the touch of a finger, hand or whole palm—with bare hands or work gloves—for bright, clear indication.

RDS5201 Rootkit Detection System is a custom-built hardened appliance which detects low-level, zero-day rootkits--the lethal payload of most advanced persistent threats (APT).

The PXIe-9529 features a vibration-optimized lower AC cutoff frequency of 0.3 Hz, and all input channels incorporate 4 mA bias current for integrated electronic piezoelectric (IEPE) signal conditioning for accelerometers and microphones.

Built to withstand the rigors of deployment in the energy sector, the LEC-3012A offers a variety of I/O options, all equipped with magnetic isolation and optical surge protection.

Featuring a highly sensitive 640×512 pixel resolution thermal detector, the A6700sc produces exceptional temperature-calibrated IR imagery for demanding research and science applications.

The 5730A measures ac current, ac voltage, and resistance, and has a large full-color, touchscreen display that brings all of the calibrator's status and settings into one location.

White Balance Adjustment is a LabVIEW executable program used after the initial sensor setup using ColorMax software, making it possible to make fine adjustments to make one sensor closely match another.

This flexible-PVC, XLPE-insulated power cable is ideal for applications with high voltage spikes and long cable runs due to its low capacitance.

When used with a current clamp, the data logger measures and stores up to 127,232 AC and DC current readings over a 0-1000 amp DC measurement range (0-723 amps for AC).

PIC24FJ128GC010 is an analog system on a chip that integrates a full analog signal chain, including on-chip precision 16-bit ADC and 10 Msps 12-bit ADC, plus a DAC and dual operational amplifiers. Price: from $2.59

GTi10, GTi20 and GTi50 are now available in models with temperature measurement ranges up to 600°C (1112°F), 1000°C (1832°F) and 1500°C (2732°F).

ER-500 allows users to connect the company's Industrial Oval Gear (Model IOG) flow meters to a network for remote monitoring and process automation capabilities.

Model AP/APX RF admittance point level sensor is now available for use where internal vessel temperatures can reach up to 842⁰F (450⁰C).

Products include a 3U 16Amp PXI Switching Module, a 5Amp PXI Power Multiplexer Module, a 32-Channel PCI Digital I/O Card, an upgrade to its LXI Modular Chassis and an upgrade to one of their PXI Microwave Multiplexers.

Products include the EPack SCR Compact Power Controller, the Versadac Scalable Data Recorder, the Optivis HMI Operator Panel and OmniSlim Signal Conditioners.

The energy logger conducts key measurements of voltage, current, power, and power factor to identify areas of energy waste. All measured values are logged automatically and can be reviewed during logging.

Version 7.3 of PlantState Suite allows users to configure and receive alarm boundary notifications to proactively manage safe plant operation.

Inductive sensing is a contactless sensing technology that can be used to measure the position, motion, or composition of a metal or conductive target, as well as detect the compression, extension or twist of a spring. Price: $2.95.

Flexium+ 8 CNC kernel is for machine applications that require movement of up to five axes. It has two CNC channels and accommodates up to four simultaneously interpolated axes.

Deeternet Wireless Gateway offers wireless viewing of data from up to 200 sensors using a web browser.

The IRTracer-100 offers 60,000:1 S/N ratio, which allows researchers to quickly and easily obtain high-quality data of ultra-small contaminants.

FactoryStudio Enterprise has a .NET real-time framework designed specifically to integrate with the PI System through a deep-level native communication layer interface.

AP22M pilot lights are ideal for outdoor applications, such as operator controls where visibility from any angle and status indication are crucial at any time, even in bright sunlight.

RL830-C602-J/C604 motherboard in the EATX form factor has the Intel C602-J/C604 chipset and support for dual Intel Xeon E5-2600 v2 processors.

Suitable for printing and converting applications, Simotion SDC can synchronize motion between multiple Simotion controllers over a Profinet network, allowing 100+ axes to be engaged simultaneously or grouped, as needed.

PICO822 supportsthe newest ultra low power Intel Atom processor E620T 600 MHz and E680T 1.6 GHz with the Intel Platform Controller Hub EG20T.

FW-8877 is a 1U rackmount with a wide range of modular interface options supporting 10GbE over copper or fiber.

The XP2i test gauge is now available in a 15,000 psi version.

The 5A, 5V thermoelectric controller combines high efficiency Pulse-Width Modulated (PWM) control with temperature stability.

Rotary encoders provide a single encoder safety solution for many applications such as packaging, automation, and robotics.

The V-Link wireless node now accepts up to seven analog sensors, digitizes output with 16 bit resolution, and transmits time-synchronized condition data to a remote wireless gateway.

A single Focus II Light Curtain or Light Grid model can be used for all applications, eliminating the need to order or stock a multiple versions for varying machine safety requirements.

SMD23E now has IP67 protection, rugged M12 connectors, and communicates with the host controller (PLC or PAC) via EtherNet/IP or Modbus-TCP.

Flow meters have interchangeable direct reading scales for Air, Water, Argon, Oxygen, Carbon Dioxide, Nitrogen, Helium or Hydrogen.

VCS-10 Voice Coil Stages feature sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture.

CS-EM BTU Meter/Energy Meter measures energy flow in heat exchange loops in HVAC, solar, geothermal and process systems.

The right angle makes it easier to reach wires and cables in difficult locations.

The flat fascia and IP66/IP65/NEMA4X rating makes these PLC/HMIs a perfect fit for the food & pharmaceutical industries.

The RFID portal is suitable for tracking assets, equipment, document, files, and people in interior environments passing through doorways, hallways or corridors. You can make it pretty, too.

The Fisher 98 Series Backpressure Regulator/Relief Valve is now available with a body made from high strength titanium.

Junction box can consolidate up to eight individual, localized analog or discrete signals into a single device.

Version 2.3 of EPLAN focuses on standardization and automation based on EN 81346 and the safety values focused VDMA 66413 exchange format.

The sensors are touchless magnetic angle sensors with a permanent magnet that can be secured to a rotating shaft, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear.

AMB-D255T3 features onboard graphics via VGA and HDMI, DDR3 SO-DIMM support, PCI slot, mSATA socket with SATA & USB signals, and ATX connector for easy power in.

The Weighing, Labeling and Sortation System automatically weighs, labels and sorts a wide range of package, box and envelope sizes to reduce costs and improve accuracy in warehouse shipping operations.

XZR200 oxygen analyzer is capable of measuring percent oxygen content to better than 1% of span.

MGate 5105-MB-EIP and MGate 5102-PBM-PN gateways connect existing Modbus and Profibus networks to EtherNet/IP or Profinet, respectively.

Free serial communication, data logging and trouble-shooting software can communicate with a range of instruments over TCP/IP, Modbus, RS-485, RS-422 and RS-232.

The Foxboro Evo process automation system has evolved directly from Foxboro I/A Series and Triconex technology. Current Foxboro I/A Series DCS users can migrate to the Foxboro Evo system with little or no downtime.

The Collision Sensor absorbs a “crash” and resets itself, virtually eliminating tool damage, downtime, and the need for human intervention.

Enhancements include improvements to AVEVA Schematic 3D Integrator, making it easier to build from, compare against, and work between P&IDs and 3D pipe design within PDMS.

The 6 riser cards are equipped with PCIe/PCI expansions to fit several requirements.

IGPS-9084GP and IGS-9812GP Managed Ethernet switches support the IPv6 communication protocol, come with SSH and SSL secure functions and can manage network equipment through CLI, Telent or Web interfaces.

NA361 has six Gigabit Ethernet ports with two-pair LAN bypass function, and one PCI Express Mini Card interface is available for wireless/3G/LTE network connection.

Microfactory combines additive and subtractive manufacturing, integrating machining and 3D printing in a safe, self-cleaning, networkable unit.

The life span of a ceramic spindle is several times that of steel spindles, assuming that a suitable threaded nut is selected.

AMI311-970 functions as a desktop or wall mount system, with LEDs for power and HDD, rest and power buttons, and two USB 2.0 ports in the front panel.

APN-210N uses IEEE 802.11b/g/n technologies and can be configured as a Wireless Access Point, Bridge, Client, or Repeater by software selection.

The Double Flex CD A1C coupling provides precise positioning under high speed reversing loads without fatigue. It has high torsional stiffness, yet allows for misalignment in high stress applications.

WECON Technology Co.Ltd is a industrial automation manufacturer.Main products are human machine interface(hmi),programmable logic controller(plc) and industrial pc.

Heavycon EVO meets IP65 and UL: 50e: Type 4/4x/12 standards for protection from condensation, icing, corrosion and contamination.

The device brings M2M connectivity to devices and equipment previously unable to be connected through wired or Wi-Fi solutions.

TKS-P20-CV01 weighs in at only 800 grams and is ideal for industrial automation environments, where fanless low-power consumption designs are required.

The meter has a 3-1/2 digit, high contrast LCD display and is powered by a 4 to 20 mA DC control loop input.

The cable can be used in applications requiring submersion in water, repetitive motion and exposure to harsh environments.

IMO-2 performs monitoring of PLCs and process data in industrial and building automation, measuring technology, energy management, and electromobility.

GOT3156T-832 can perform in temperatures ranging from -20°C to +55°C for use in unconstrained thermal environments.

BL67 modular I/O system connects I/O signals to industrial Ethernet networks, including EtherNet/IP, Modbus TCP and PROFINET.

DVC6200 digital valve controller has an all stainless steel housing that withstands the corrosive atmospheres often experienced in chemical plants, pulp and paper mills, as well as near-shore and offshore oil and gas installations.

This manually operated valve is constructed of PTFE wetted parts and Polypropylene structural components.

The Q45 push button’s bidirectional communication permits operators to send a digital signal with the push of a button and receive confirmation the signal has been received.

Analytical Controls Reformulyzer provides fast group type analysis of gasoline and gasoline blend streams using multi-dimensional gas chromatography.

conga-TS87 now supports Intel Advanced Vector Extensions (Intel AVX) 2.0 for improved floating point instructions in signal and image processing.

Buccaneer 7000 has 25A and 600V rating and sealing characteristics to IP67, IP68 and IP69K standards.

Automation Studio 4 features OPC and EPlan connectivity, and object-oriented programming.

Enhancements in Version 5.0 include HiFusion, a stand-alone application that facilitates the integration of any SNMP-capable device into Industrial HiVision.

M1500SRT received a UL-approved operating temperature rating of 55°C (133°F), meeting the U.S. Federal Requirements specified in 46 CFR 111.01-15(d) for offshore electrical systems.

Cscape features an integrated control and motion programming environment, which can be downloaded free on the HS Motion Group website.

The 2008S is suitable for monitoring pressures in a wide variety of installations, including oil and gas control panels.

Grasshopper3 is now available in 10 different monochrome and color models for machine vision applications, including 3D scanning, electronics assembly inspection, microscopy, and ophthalmology.

The CX8093 Embedded PC is equipped with a PROFINET RT device interface designed as a 2-port switch for daisy-chain cabling.

PRV and PPV terminals facilitate simple wiring, reduced cabinet space requirements, expanded wire routing and signal distribution capabilities.

Pumps have integrated power supplies for semiconductor and flat panel display manufacturing industries.

PI miCos LPS-45 linear translation stage can position samples along a precisely guided path with distances up to 1 inch.

PCIe-7360 high-speed digital I/O module supports up to 100 MHz data rates and 400 MB/s throughput with parallel and bi-directional 32-channel high-speed I/O lines.

USB 2.0 Type-A and Mini-USB 2.0 Type-B Connectors meet IP67-rating requirements when mated or covered with a protective cap.

GRP-520 allows wireless communication with remote devices like PLCs, controllers, computers, data acquisition equipment and instrumentation.

The unnamed inductive angle sensors are able to monitor three-way valves, while also detecting the valve position during cleaning cycles.

The TML Series offers up to 50 Watts of fully regulated output power with an industry standard 2 x 1” footprint.

The B060A400AC is capable of outputting 60A peak and 30A continuous while the B100A400AC outputs 100A peak and 50A continuous.

Model DPS with CANopen protocol communication allows customers to connect to longer cable distances without sacrificing accuracy.

Screw clamp termination makes field-assembly simple by eliminating the requirements of special tooling.

Express-HL supports the 4th generation Intel Core 2- and 4-core mobile processors (i7/i5) with the Mobile Intel QM87 Express Chipset and up to 16GB dual channel DDR3L SDRAM at 1600 MHz system memory.

Capable of supporting HPTX, E-ATX, XL-ATX, ATX, and Micro-ATX motherboards, this fully aluminum full tower keeps components at optimal operating temperatures.

The Triflex LNI 250 can measure conductive material in a non-metallic tank without having to be present inside that tank and therefore without product contact.

Model XLP58 precision low profile “pancake” load cell is capable of measuring force in both tension and compression.