Industry Products

This ATX embedded motherboard comes with 4 DDR3/DDR3L 1333/1600MHz DIMM memory interfaces supporting up to 32GB system memory for faster communication between components.

A rugged, lightweight and corrosion resistant plastic (glass-filled nylon) housing is available on the Rosemount 3101, 3102 and 3105 process level transmitters.

This DIN rail-mountable unit based on the Intel Atom N2600 CPU is ideal for deployment in protecting networks in power generation and other industrial environments.

Embedded Ethernet MicroSmart Pentra with MRAM is available in two CPU models with 12 I/O configurations (8 DC inputs and 4 transistor sink or source outputs) and is compatible with current WindLDR software.

ROD 1930 rotary encoder series is suitable for use in mechanically-demanding motion control environments.

Model 71610 provides 32 LVDS differential input or output pairs plus LVDS clock, data valid and flow control signals via an easy access front panel 80-pin connector routed to the Virtex-6 FPGA.

PCM4806E drive allows an encoder input to the controller for closed-loop position correction capability.

Velox comes with MCU, SDRAM, flash memory, 10/100 Ethernet, three UARTs, SPI/I2C, RTC, eight timers, eight channel 16 bit ADC, two 16 bit DAC and a high-speed (83 MByte/s) data channel.

In a “Ferris Wheel” Positioner, one station is positioned in front of one to four welding robots, while the other station is outside the robot envelope where the operator loads/unloads parts.

PICO xMOD valve uses piezoelectric actuation technology for continuous operation at speeds of up to 500 cycles/second.

Software enables users to access plant-floor data via Wonderware InTouch software, using any mobile device, including Microsoft Surface tablets, iPads, iPhones, Androids and others.

Super Snooper scanners can be set up as Modbus RTU Masters, Slaves, or Snoopers, monitoring multiple Modbus devices for up to 16 process variables.

The TR-702 comes with integrated Ethernet or Wireless 802.11b/g Wi-Fi.

The two 7” panel PCs are powered by the Freescale i.MX535 ARM Cortex-A8 processor with speeds up to 1GHz. Based on the ARM architecture, the system is fanless with low power consumption.

CUF and CUM terminal blocks for the appliance industry have been tooled in high volume, thereby making them cost-effective.

Tropos XA delivers robust, high-performance and scalable wireless connectivity for utility, rail, mining and seaport applications in extremely demanding environmental conditions.

Model 7253D triaxial Isotron accelerometer is for applications requiring the measurement of shock and vibration simultaneously in three mutually perpendicular axes.

The 5-Axis Auto Tuning System performs measurements and compensation in real-time and allows for adjustments to be made in 10 minutes, minimizing downtime and enabling higher levels of accuracy.

PC-3X97B series is equipped with IP65 certificate that guarantees dustproof and waterproof protection, ensuring the reliability and stability operation in the broaden environment applications.

PS-1080A, IPS-1080-24V, IPS-1042FX-24V and IPS-1042FA are for high power demand equipment, such as a PTZ camera, long-distance wireless AP, etc.

CM100-C is powered by the Quad-core and Dual-core AMD R-Series Accelerated Processing Units (APUs) with the AMD A70M Fusion Controller Hub.

Series TSCC Digital Dispensing Temperature Control can be used to monitor and control product temperature and dispensing rate in the production of melted cheese, chili, or other heated food products.

These gages use air coupled, pulse echo acoustic technology which permits noncontact gauging for many industrial applications.

The corrosion-resistant ZS71 Series is expressly designed for high-pressure/ high-temperature wash downs (IP 69K).

SDN 40-24-100C single-phase SDN-C transformer is suitable for powering large DC loads on a standard, single-phase AC circuit.

IGMP inductive proximity switches are for low-temperature environments in spiral freezers and other cryogenic applications that use liquid nitrogen as a coolant.

Upgrades include network, power supply, and I/O modules.

These 300 V cables are intended for stationary wiring applications with minimal or no exposure to oil and flex cycles.

TNC 128 straight-cut CNC control works with milling, drilling and boring machines.

The all-optical, non-metallic MR338 passive sensor provides precision absolute angular measurement from 0° to 360° with 13-bit (8192 count) resolution and 12-bit multi-turn tracking.

UltraBot IE automated storage and retrieval system (ASRS) delivers totes, boxes and cases to one or more high-speed order picking workstations.

AC500-XC PLC is protected against a wide variety of threats including high and low temperatures, high humidity, low air pressure, salt mist and hazardous gases, and vibration and shock.

Emax Link abbreviated switchgear provides electrical Distribution Equipment Manufacturers (DEMs) a solution to design and build their own UL 1558 switchgears.

While small, the PC-V360 is able to hold VGA cards, power supplies and two removable hard drive cages holding a total of five 3.5” and 3 2.5” drives.

Encapsulated WLA light is a rugged, high intensity light ideal for machine lighting, visual inspection stations and general industrial area lighting.

OverView MVL-621 and OverView MVL-721 are industry-standard modules with full HD resolution and screen diameters of 60” and 70,” respectively.

These models have flow rates from 1 ml/min up to 30 ml/min by selecting from a choice of 4 different RPM drives (8, 12, 17 or 25 RPM) and a choice of tubing sizes.

SPiiPlusCMhp/ba is not only a mouthful, it has three built-in universal drives, EtherCAT master, and short move & settle times.

PFM-HDS has an AMD G-Series T16R Accelerated Processing Unit and companion A55E chipset for compatibility with legacy I/O, low power consumption and processing and graphic performance.

PCS100 UPS-I and PCS100 AVC protect sensitive industrial loads from voltage sags and other voltage disturbances.

The Rechargeable Battery Unit Kit removes the cost, hassle and inconvenient timing of replacing disposable batteries.

The SFT-110 SFE is well suited for both research and process development applications.

XCOM-6400 is a ruggedized COM Express module offering high-performance, low-power multi-core processors and a SODIMM hold-down that allows users to upgrade memory. Price: starts at $1995.

xPico is a compact, embedded wireless device server for machine-to-Wi-Fi connectivity. Price: from $27.80.

Alpha Mega is a fully integrated, digital alpha spectrometer for environmental laboratories and counting room applications requiring large sample size analysis capability.

TKS-G21-QM77B box computer, and EPIC-QM77 and PCM-QM77 single board computers, are based on Intel 3rd Generation CPUs and Intel QM77 chipset.

Desktop switching power supplies provide up to 70W from an input voltage range of 90-264VAC (47 to 63Hz). Price: from $17.

RLX2 features client/bridge fast roaming between access points, Ethernet packet optimization, and enhanced diagnostics.

myRIO embedded hardware device helps students design real, complex engineering systems more quickly and affordably than ever before.

The cDAQ-9188XT is an 8-slot CompactDAQ Ethernet chassis for distributed or remote measurements in extreme environments.

SP2 provides native support of HTML5 screens and animation for multiple devices and platforms, including Safari and Chrome browsers.

Series 70 has a 6-meter detection range, slim sonic cone, and integrated temperature compensation allowing -25° to +60°C fluctuations.

Meter is for use in multi-tenant applications including office buildings, shopping malls, industrial sites, residential complexes and universities.

CNi-ALs limit controller features universal inputs, 2 relay alarm outputs, programmable color displays, high/low limit and remote reset input. Price Starts at $164.

TE-SNW Surface Temperature Sensor non-intrusively measures the process temperature in hot and cold water loops in buildings.

The compact PULS DIMENSION C-series has a new family member, DIN-rail DC/DC Converter CD5-series, which can be widely used in many applications.

FX3S micro PLC provides full function PLC control, built-in high-speed inputs and outputs, relay outputs, and multiple built-in communication ports.

The bi-directional wet/wet design can be used for tank level measuremens, monitoring flow rate in heat exchangers or filters, and in a variety of test stand applications.

V3.0 now has the capability to bridge data from any classic OPC Server to any modern OPC UA Client.

Model 7298 triaxial, variable capacitance accelerometer makes accurate measurement of low-frequency events. Typical applications are measurement of whole-body motion in three orthogonal directions immediately following a shock.

APCe8670 carrier card for PCI Express provides an easy and efficient solution to interface a PMC mezzanine module to a PC across the PCI Express (PCIe) bus. Pricing starts at $750.

Corrosion Resistant Stainless Steel (CRSS) Connectors include standard cord connectors, liquidtight conduit fittings, watertight conduit hubs, jacketed metal clad cable connectors and ventilation plugs.

ScanIR3 creates real-time thermal images suitable for temperature monitoring of continuous processes as well as discrete manufacturing in production lines.

EDR-810 is an industrial-grade 8+2G secure router with Firewall/NAT/VPN and managed L2 switching functions, which allows it to transmit data efficiently while protecting the network and critical devices from cyber attacks.

The Model 2450 combines the functionality of a power supply, true current source, 6-1/2-digit multimeter, electronic load, and trigger controller in one tightly integrated, half-rack instrument.

Enhancements include front or rear panel touch safe, IEC inlets, an on/off rocker switch, AC "on" indicator and a 115/230V selectable switch enabling products to be used worldwide.

EL-2800M-PMCL and EL-2800C-PMCL 2.8-megapixel industrial camera models incorporate high fidelity ICX674 CCD imagers from Sony.

The WPL406 and WPL612 are designed for industrial barcode printing requirements, while the WPL304 is for desktop barcode printing. Prices start at $429.

CoreModule1-86DX2 is ideal for control applications that require power efficiency, small form factor design, longevity, and industrial grade ruggedness.

ST102A features a dual-element averaging system, improving installation repeatability and accuracy for larger diameter pipes and ducts.

Corrugated mounting plates are available in two sizes--“wide” (4.00”) and “narrow” (2.66”)--standards in the industries using corrugated bins.

The updated interface addresses international compatibility by adding language files for Chinese, German, Japanese and Spanish.

These programmable transducers convert and condition signals from most of the common resistance temperature detectors (RTDs), as well as thermocouple temperature sensors.

GS3-U3-91S6 camera has high resolution, global shutter CCD sensors with a USB 3.0 interface.

Updates in ControlMaestro 2013 include the BACnet Advanced operator WorkStation Certification, more than 160 standard communication drivers, and support for most standards and communication protocols including OPC, Modbus, SQL, ODBC, etc.

By Bill Lydon, Editor To meet their customer’s requirements, Sabisu has developed Shika, a lightweight historian, to process, manipulate and store data at higher speeds than can be achieved with SQL databases.

Turn-Cut function allows for processing work on horizontal machining centers without the need to use secondary machinery for a turning application.

The EHV/EHS is 30% more compact than previous models, yet it sounds off at up to 110dB at 1m.

The thyristor units start at 3A and range up to 2600A and 690Vac.

LS2018 and LS3518 motors are ideal for the design of compact linear axes as there is no need for the coupling and the bearing support point for the screw.

Series GFM2, GFM3 and GFM4 Gas Mass Flowmeters measure flow rates of a wide variety of gases.

HM960-HM86 is powered by the Intel HM86 Express chipset with up to 2 16GB of DDR3L 1333/1600MHz low voltage memory interfaces for faster communication between components.

HMI SCADA software has user interfaces that display and execute across all types of common Web browsers and are accessible from any mobile or smart phone application.

Lexium MDrive motors are now available with EtherNet/IP, ModbusTCP, and CANopen fielbuses.

PMK allows virtually any motor to be connected in parallel to any linear ball screw actuator, regardless of manufacturer.

Software allows for simulation, validation and optimization to be completed in the 3D virtual world and then transferred directly to the real world.

CANblue II universal bridge, gateway, and PC interface solution is for the wireless networking of CAN components and systems.

The controller has a Linux-based, real-time OS and Xilinx Zynq-7020 All Programmable system on a chip (SoC), which combines a dual-core ARM Cortex-A9 processor and Xilinx 7 Series FPGA fabric.

LabVIEW software is ideal for any measurement or control system, and the heart of the NI design platform. Integrating all the tools that engineers and scientists need to build a wide range of applications in dramatically less time, LabVIEW is a development environment for problem solving, accelerated productivity, and continual innovation.

Safe-T-Rack helps ensure compliance with evolving arc flash mitigation regulations and safe operation of circuit breakers, motor starters, loadbreak switches, vault switches, network switches and Load Tap Changers.

Products include Floodgate Defender, Floodgate Agent and Floodgate Aware software.

SEA 9751 and SEA 9754 modules enable users developing monitoring and measurement systems based on CompactRIO to access the entire application remotely.

The positioning range of the N-725 has been extended to 2 mm while maintaining very short settling times on the order of 20 milliseconds.

X20 and X67 modules now function reliably at temperatures from -25 to +60°C.

HR908-B is a Type 6 COM Express Compact form factor single board computer, based on the Intel Core QM67 Express chipset.

LEC-2260 allows sustained operation at temperatures between -20°C and 55°C.

The safety laser scanner offers a wide area detection zone at 190 degrees and is easily set to a maximum protection range of 2 meters and maximum warning range of 10 meters depending on the application.

EDS-405A/408A-EIP and EDS-405A/408A-PN are EtherNet/IP and PROFINET-enabled managed Ethernet switches.

TC8928 Analog Broadcaster/Bridge receives a single 2/4-wire 600 ohm analog signal and broadcasts it to up to 7 remote analog lines.

The G-Type sensor features direct analogue output in 3 signals: in voltage (0-10V or +/-10V) or current (4-20mA).