Industry Products

SafeDESIGNER provides an integrated safety tool for programming safety-related functions from within the Automation Studio development environment.

Machinery Health Manager 5.3 adds Smart Wireless vibration data and process data from any WirelessHART-enabled transmitter.

FT/DF turbine flowmeter system provides accurate measurements of diesel fuel consumption in a wide range of industrial applications.

Advanced E5CN-H models provide OEM machine builders with high-speed response, higher resolution and accuracy than standard models, logic operations and preventive maintenance functions.

DSU35 sensors monitor valve position via pneumatic rotary actuators, and then provide electronic feedback indicating an open or closed position.

TFX Ultra provides flow measurements for full pipe liquid applications such as cooling lines, raw sewage flows, water distribution and processes where system shutdown is impossible.

The bypass network module allows customers to deliver communication solutions with higher throughput capacity in next-generation security and acceleration appliances.

Fluke 772 and 773 milliamp clamp meters help technicians test critical automation and control circuits without breaking the circuit or interrupting operations.

MPS is an easy-to-use, network-enabled implementation of a BASIC-like programming language with commands added specifically for motion control.

Kits give designers easy, fast access to the connectivity and data efficiency of the fourth generation of Stellaris integrated microcontrollers. Prices start at $99.

MHXX Series hollow-shaft, large-bore, magnetic rotary encoders contain no bearings, so measurement is contact-free and components do not wear.

VKK modules are for light-duty handling, pick-and-place and feed applications for the automation and packaging industries.

I-PAK SE enables the pharmaceutical industry to meet the requirements of 21 CFR Part 11 for reliable, accurate and validated inspection of labels and products.

Flexi Soft is a software programmable, expandable, easy-to-commission safety controller that can be adapted to a variety of safety applications for small- to medium-sized machines.

Handheld optical time domain reflectometer (OTDR) can be used for the installation and troubleshooting of LAN, campus and WAN fiber networks.

CM-141 1.4 megapixel cameras have high sensitivity CCD chips, high signal to noise ratio, 30 frames per second operation, and small size.

Performance Advisor predicts performance of assets by identifying, in real-time, performance deterioration of critical machinery.

RX3i offers true dual redundancy data synchronization with dual modules and dedicated, redundant links to one another. They operate with virtually no overhead added to the control application.

The QX-870's intelligent sweeping laser can reliably read multiple 1D and stacked 2D barcodes, in varying locations, even when small, poorly printed, or damaged.

High-Density Power Hub increases available power supply current from 360 mA to 500 mA while maintaining space requirements.

FL mGuard provides firewall, router and VPN functionalities in a single, rugged device to protect PCs, PLCs, I/O units, bus couplers and industrial Ethernet devices.

RX5000 can withstand high levels of electromagnetic interference, radio frequency interference, and a temperature range of -40°C to +85°C.

Power Supply provides up to 28 V and 500 mA for FOUNDATION fieldbus H1 segments.

Clarity Matrix incorporates 46-in. commercial-grade LCD panels that tile together with only a 7.3mm image-to-image gap, forming a video wall only 4.5 inches in depth.

The Achilles Network Testing Platform now includes test suites for emerging industrial wireless protocols.

Cable transducer has a flexible measuring cable mounted to an internal spring-loaded spool and a quadrature encoder output to measure linear motion applications.

LEC-7500 has an Intel Atom computer, discrete graphics and 1080p full HD video output.

MINI Hawk imager reads 2D direct part marks (DPM) that are damaged, distorted or otherwise challenging.

In spite of their small size, these load cells deliver 0.50% accuracy for ranges from 10 to 1,000 lbf.

IndraControl VDP, VSB and VPB series of PC-Based HMIs are for applications where the PC and operator panel must be kept separate.

Options includes square or rectangular shape, NAMUR, AC/DC, NPN or PNP output, NO or NC output, and programmable output.

Line of multi-port interconnection junction blocks offered in four, six and eight-port designs. Blocks are IP67 rated with all ports connected or covered with protective caps. These wire junction blocks are sometimes referred to as wiring connection blocks, panel junction blocks, or termination blocks. Saves time and reduces total cost.

Enhancements include geometry difference detection, export of assembly animations to AVI format, and path authoring in process design and documentation.

V4.0 integrates with the Siemens Step7 programming software by offering a direct import of the tag names (S7 symbols) from the S7 project.

Series 5000 connects valves using the DIN 43650/ISO 4400, EN175301-803:2000 specification.

Users of data acquisition modules and boards from Data Translation can choose from four versions, which are available for download from the manufacturer's web site.

SPAB has a pressure measuring range of 0 to 10 bar or -1 to +1 bar.

STXW 500 and STTW 401 transmitters can convert any measurement device with a contact-closure switch input into a wireless input.

BT-CAT5-P4 series injectors have industrial grade cast aluminum housings and shielded RJ45 jacks for EMI suppression.

Flow meter provides true linear performance, high accuracy and flexibility for multiple gases.

Sensor can be mounted on a rear metal wall, or it may be fully embedded, delivering a 40 mm switching distance when surrounded by metal on all four sides.

Panel PC has low power consumption, fanless operation, integrated touchscreen, LED backlight, and IP54 dust/water protection.

Pilot device's locking nut secures inside the panel, making it tamper-proof.

CM-MPS and CM-MPN offer line voltage monitoring on three phase systems up to 690 Volts.

993EN and 994EN 16-channel analog input modules simplify installation and reduce the cost of interfacing sensor signals to remote controllers.

ADAM-3112 and ADAM-3114 can convert up to 400 VAC or 5 AAC signals to 0~5 VDC signals for data acquisition cards.

Multiport junction blocks provide time, cost and space savings by allowing multiple sensors to be wired to a single block with one cable connecting to the control panel.

With its no-moving parts thermal dispersion mass flow sensing element, ST51 Flow Meter provides direct mass flow measurement of gas.

EasyView 500 and 8000 family of graphics panels connect to PLCs, RTUs and other intelligent instruments.

Proficy Tracker 8.0 manages inventory, schedules resources in real time, and controls the routing of material through a discrete manufacturing process.

Thermoelectric coolers employ the Peltier Effect to provide 340 BTUs (100 W) of cooling output without refrigerants or gases.

All models in the C5100 Series have remote sensing (up to 150v output), overvoltage protection, and current limit protection on the output.

Ethernet switch is ideal for operation in zone 2 and Class I Division 2, with II 3 G Ex nA II T4X protection over a - 40 to + 75°C temperature range.

The actuator reduces valve/actuator envelope dimensions to provide greater valve installation versatility for both skids and tight processing lines where space is at a premium.

StationPortal provides a common Ethernet interface for I/O such as pushbuttons, bar-code scanners, LEDs, and torque guns used in assembly support systems.

SCANNDY and smartSCANNDY barcode and RFID scanners plug into the USB-port of a computer, forklift terminal or other devices.

With an integral controller, the motor provides an all-in-one solution for a wide range of applications where programmable movement of simple mechanisms is required.

EVAL UFDC-1/UFDC-1M-16 evaluation board lets users easily access all functions provided by UFDC-1 and UFDC-1M-16 integrated circuits supported by the International Frequency Sensor Association (IFSA).

TECHSPEC lenses are suitable for sophisticated gauging and inspection solutions.

VWDIR134 90 volt brushed DC gearmotors provide up to 500 in-lb (56.6 N-m) constant torque at speeds as low as 6 rpm.

Flexible adapter has vertical and horizontal hinges which allow the adapter to rotate in virtually any direction. Price: $9.99.

ABICS provides complete position control to all axes on virtually any hoist, crane or industrial vehicle.

Spring-set, pneumatic-release brakes provide unlimited linear travel and develop braking forces to 5,400 lb for emergency stopping or holding position with zero backlash.

PFD enables simply-designed user interfaces for embedded systems. With no specific experience required, development time and costs are dramatically reduced.

Software allows operating USB cameras in master mode, so that the camera itself controls the data exchange. This way, significantly higher frame rates can be achieved in triggered cameras.

NET620 allows integration of serial connected devices into Ethernet networks without a complicated network interface.

InPro 6970i helps to minimize waste of beer and reduce maintenance costs with rapid and accurate measurement of dissolved oxygen.

An integrated PE foot is available in 6.2 mm versions of the UT 4 knife disconnect, diode and fuse terminal blocks.

UV- and scratch-resistant window makes these panel meters ideal for demanding outdoor applications, as well as harsh plant environments.

SCADAPack 314 has 32-bit processing, high-speed serial communication, integrated power supply, advanced power-management, and a wide range of digital and analog I/O. Price: $995

The I20 offers four different lens options that make it easy to quickly alter the field of view based on the type of application.

All FlexTop models can be configured via the FlexProgrammer 9701. Due to ATEX approval, all models are suitable for applications in hazardous areas.

Automatic integration with an online server offers secure bi-directional communication to monitor the health, readiness and geographical position of remote devices.

Products include CAN Bus isolated repeater, CAN to Fiber converter, Intelligent Serial to CAN converter, Ethernet to CAN/Serial converter and USB to CAN converter.

SP 5000 Series converts rotary movement into a proportional voltage signal based on conductive plastic technology. Prices start at $11.

Fork sensors use Class I, low-power lasers to ensure the smallest light size (0.05 mm wide), which is ideal for detecting small targets.

Kit contains hardware and software to reconfigure the Smart 485 level sensor for different barrel/tank sizes, response times, and level sensor analog output configuration.

JACE-202-XPR is ideal for managing and controlling energy applications that allow buildings to become more efficient and reduce energy costs.

Control Station's csTUNER PID tuning application integrates seamlessly with Yokogawa’s CS3000 distributed control system (DCS).

EnduraTouch FX NEMA4X computers now have a 1.6GHz Intel Atom Dual Core processor.

Software tools capitalize on the CANopen device profile of EtherCAT. All network management is taken care of automatically by a few simple commands linked into the user’s C++ application program.

MC038-010 and MC050-055 microcontrollers offer features for machine control, hydraulics and vehicles.

LinkRunner connects to both fiber and copper network links, at speeds up to one gigabit, to detect and identify 90% of basic connectivity and cabling problems.

Rockwell Automation added process device configuration using Field Device Tool (FDT) technology to its FactoryTalk AssetCentre asset management software.

R.A.M. allows data logging and SCADA operations to be monitored and controlled from remote locations anywhere in the world via existing secure cellular networks.

NA-200A comes with six high-speed Gigabit LAN ports, suitable for firewalls, VPN, anti-spam and anti-virus applications, as well as intrusion detection and prevention.

Inverter has a highly visible Internal Disconnect switch that removes power to facilitate service and maintenance.

IPS Series makes it simple to create a networked video surveillance environment for up to for 32 IP cameras.

With integrated support for GigE Vision and IEEE-1394b IIDC, the 4Sight XB helps reduce overall system costs by eliminating the need for add-in acquisition boards.

USB-QUAD08 data acquisition device provides simultaneous input and decoding for up to eight incremental quadrature encoders at resolutions up to 48 bits.

The gauge is now available in high temperature ranges up to and including 5,000 psi, in both bottom and back connections.

Enhancements include improved simulation of multipart assemblies, increased efficiency when simulating heat transfer, and improved collaboration in a multi-CAD environment.

Sensors include five compact, self-powered transducers that can easily be attached to pumps, motors, and other equipment from which AC load trending data is required.

D2RF has a built in Up or Down counter mode, making it convenient to count the amount of parts being extruded or packaged in a bag.

Router supports industrial protocols and high-speed 3G connectivity, enabling high-bandwidth applications like remote video surveillance in harsh environments.

With a 20 A output at 12 V DC, the power supply is suitable for solar, wind turbine, telecommunications and process control applications.

Logix-XT controller, FLEX I/O-XT and communication modules reduce the need for additional heating and cooling equipment.

TC3846-1 extends 64kpbs G.703 co-directional circuits over Ethernet/IP networks in utilities.

SLP-500, with a laser line length of 50 mm, scans at ultra-high speeds with an accuracy of up to 20µ and is primarily used for scanning objects such as molds, stampings, and sheet metal.

C66xx series includes two versions with either the powerful Intel Core2 Duo or Core2 Quad processors on a Beckhoff ATX motherboard.