Industry Products

With the EK1132 Power over EtherCAT junction terminal, EtherCAT sensors can now receive power over standard Cat 5 cables.

Viper switches are designed for applications with severe operating conditions and extreme environments.

Enhancements to BizViz V9.13 include EarthWorX Web Part for geographically contextualizing enterprise information and key performance indicators (KPIs).

Upgrades include GENESIS32 V9.13, GENESIS32 V8.05 and the V8 Service Pack 3.

Enhancements automate techniques and tools for the integration of requirements traceability with software testing and verification.

Adding a CANopen option card allows drives to be controlled by a CANopen master using DS301 and DSP402 communications protocols and the CAN 2.0b Passive physical layer.

Ductorseal sealed wire and cable assemblies solve bulkhead conductor sealing problems by providing an interconnecting harness in an hermetic feedthrough.

The kit contains a Dual Real-Time Ethernet (DRTE) module, baseboard, software, reference design, and all the cables required to evaluate the EtherNet/IP solution right out of the box.

FlexTorq 762 series hollow shaft offset DC gearmotors can be driven by 1/20, 1/4 or 1/2 HP permanent magnet 90 volt DC variable speed motors.

TFX replaces obsolete Bailey 3 Series Stepper Motor Drive modules for valve actuator positioning.

IGS-3044GP supports 8 Gigabit ports with 4 ports of 10/100/1000Based-T(X) and 4 ports of 1000Based-SFP for multiple flow Gigabit environments.

The low-cost LC uses an AMP or Tyco brand connector for both motor and feedback connectors.

FRCIR connector combines Ethernet and MVB cable lines in a single interconnect package for shielding against interference and contaminants.

Scenario Virtual Engineer offers power generators a solution for building, testing and verifying control logic and process graphics without impacting ongoing plant operation

UNO-1170 has an Intel Celeron M or Pentium M CPU, 512MB/1GB DDR SDRAM, can operate in temperatures up to 60°C, and has a 512KB SRAM battery back-up system in the event of sudden shut down.

Based on the Piezo Walk principle, NEXACT combines high forces and long travel ranges with sub-nanometer resolution in a small package.

24S24.8TH has a 4:1 input range of 9 to 36 Volts DC in a 200 Watt industry standard half brick package. Price: $115.50

ProSense pressure transmitters now support five new input ranges for higher (200 psi, 3000 psi) and lower pressures (15 psi, 30 psi). These compact pressure and vacuum transmitters are designed to monitor system pressure in hydraulic and pneumatic applications. They are smaller and easier to install than mechanical models. Prices start at $125.

RHP line includes 3 phase contactor configurations rated at 120, 240, 280 or 600 VAC at 40 or 50 amp load ratings to replace Mercury Displacement Relays.

On Demand message feature sends SMS messages from a mobile device to the silent sentry to read any of the digital and analog/counter I/O values.

Sound and Vibration Measurement Suite Version 7.0 adds psychoacoustic measurements, making it possible to quickly set up tests to quantify noise, vibration and harshness.

Asepticplus gearmotor performs reliably in the high pressure, high temperature washdown conditions found in the food processing industry.

New models support RT (real-time) and NRT (non-real-time) data transfer according to the PROFIDrive profile with cycle times as short as 10 ms.

VRAL is available with a concentric shaft and a 5 arc-min backlash rating.

T-BOX now has SIA DC-09-2007 Internet Protocol Event Reporting to report events from premises equipment to a central station.

LPC-650 is a tiny package that measures 6.5" x 6" x 2" with Intel Core 2 Duo processors and up to 4GB of memory.

VMC-3000 is a DSP based plug-in card that can be configured in position mode, torque mode and a high-precision frequency locked velocity mode.

Latest versionn of monarch (Multi-platform Open Network ARCHitecture) is suitable for mid-tier utilities.

IEC 61850 OPC Solution covers both Logical Nodes and Goose Device Drivers.

The EZ Jump terminal blocks are available in screw clamp and spring clamp wire terminations in single level, multiple level, functional, fuse and numerous other styles.

Latest version offers centralized monitoring of bar code and third-party equipment, and camera image quality analysis.

EmbedRF Integrated includes hardware and software for integrating an RF design directly into on a board.

220 Series uses 32% less power than equivalent gear motor drives, drastically reducing energy costs and carbon footprints.

CS6910G incorporates the Super CCD Honeycomb color sensor, conforms to the AIA GigE Vision protocol, and is compatible with standard Gigabit Ethernet hardware.

The seal enables level measurement of condensed and liquefied gases at very low temperatures (to -196 C) for use in process tanks, side chambers, storage tanks and transportation vessels.

Upgrades include additional SIL 3 libraries for shut-down applications, and combined non-SIL, SIL 2 and SIL 3 applications for increased safety protection and process efficiency.

With the latest release, TopView can record all changes to alarm and notification settings, contacts, schedules, and notification groups.

ES2151 and ES2152 interface 16 DC current inputs, 16 voltage inputs, and either 16 current or voltage output signals to Ethernet devices or controllers

W900-IM radios transmit in the 902-928 Mhz band with no FCC license necessary to operate or install.

With a simple programming tool, users, system integrators and distributors are able to select between 1 and 65,536 pulses per revolution via a PC or Notebook.

Panel PCs come in several mounting designs including IP65/NEMA 4X chassis, panel mount, open frame, or custom designs to fit into a wide range of applications.

eBOX530-820-FL is smaller than an adult hand. It has an ultra low power Intel Atom processor up to 1.6GHz.

243013 handheld Reader is an ideal solution for access control, asset tracking, and warehouse management.

MRS Sigma provides smooth and quiet operation with self lubricating sigma shaped Simplicity polymer inserts.

HalfRACK's 6 I/O slots provide up to 150 analog inputs, 192 analog outputs, 288 digital I/O, 48 counter or quadrature channels, and 24 Serial or CAN-bus ports.

ADAM-5053S and 5057S support high isolation and up to 2,500 VDC to avoid damage from different channels and protect system operation stability.

ProSense line now includes pressure switches with adjustable setpoints from 0 to 5,800 psi.

PSG Series, a general-purpose family of power supplies, cover the majority of 24V direct current (dc) control applications.

Paint Mate 200iA paints small parts, and provides an alternative to applications requiring multiple fixed paint guns.

9600 linear motion position sensor features a short 0.15" mounting terminal and overall height of 0.50".

BT-87-TP wireless industrial keyboard uses Bluetooth technology.

Powerlink protocol software now meets Powerlink redundancy specification V 1.1.0 and is available as source code and as IP core.

Enhancements to InnoCielo Meridian Enterprise 2008a and InnoCielo TeamWork 2008a include support for the 64-bit version of AutoCAD, Autodesk Inventor and SolidWorks.

8920-500-DC and the 8921-1250-DC employ linearization and cold junction compensation as well as complete three-way signal isolation.

WEBS uses the low-power Intel Atom processor and Intel 945GSE and ICH7-M chipset.

FN9244 and FN9244E filters are ideal for noise-intensive portable devices in highly regulated environments. Price: $5.

Status software package is a HMI (Human Machine Interface) designer for process control and manufacturing industries.

VantagePoint Trend captures and displays live, dynamically updated real-time data in a Line Chart format.

The IS-110 is powered by either one or two Intel 64-bit Xeon dual core/quad core 1333/1068 MHz FSB processors and up to 32 GBytes of memory.

Enhancements to PlantState Suite 6.2 include obtaining data from disparate control systems, a new KPI Grid Viewer and improvements to the Alarm Shelving module.

Enhancements include a Utilization Capability Object, ArchestrA graphic templates, and .NET controls.

Enhancements include improved security options and electronic signatures, automated checks, validations and deployment preparation, and tracked versioning and change management.

GOT-5840TL has a low power AMD LX800 500MHz processor and a fanless design for limited space and heavy-duty environments.

CM-030PMCL-RH 0.3 megapixel industrial CCD camera has a remote head lens and Power over Camera Link (PoCL) digital interface.

XG100 Series gun-shaped mobile computer scans barcodes and communicates wirelessly.

TITAN 4000 Total Nitrogen/Sulfur/Chlorine (NSX) analyzer covers from low ppb (parts per billion) to high ppm (parts per million) concentrations.

ED752 is suitable for pressure measurement in the cooling water circuit of nuclear power plants.

Zebra ZUZ-110 and ZUZ-111 Zigbee converters support RS-232, RS-485 and Ethernet.

CN7200 ramp/soak temperature/process controller has a dual 4-digit LED display for local indication of process and setpoint values. Price starts at $169.

Latest version can access files from multiple CAD formats, including CATIA V4, V5, SolidWorks, Pro/E, Unigraphics, Parasolid, IGES and STEP.

TMOV34S Series varistor helps customers meet the abnormal overvoltage conditions specified in Section 37 of UL 1449.

The unit has two camera heads equipped with CCD sensors of the same or different types. Using flex cables, the camera heads can be installed at any distance and tilt angle.

MXB-U actuator is suitable for applications that require high velocities and accelerations, long stroke lengths and high duty cycles, such as assembly, milling or work center positioning.

iVu Image Sensor combines the simplicity of a photoelectric sensor and the intelligence of a vision sensor to support inspections without the use of a PC.

MRT 18 modular multi-level fixed printed circuit board terminal block is rated for usage in temperatures up to 110°C.

Automatic synchronization allows up to 10 sensors to operate in very close proximity to one another, without cross-talk.

Stand-Alone provides the capability to download programs to a Prodigy motion card for onboard execution, off-loading or eliminating the PC host.

Switches employ solid state pressure sensors and surface mount interface electronics, all self-contained within a sealed housing.

WRA_YMD and WRB_YMD include 32 models ranging from 4.5VDC to 72VDC with single and dual output voltages of 3.3VDC, 5VDC, 12VDC, 15VDC and 24VDC.

HSSI-HES works with SPiiPlus and MC4U family of motion controllers.

Cables are designed for use in the rugged environment common to most machine tool applications.

Enhancements in Electric P8 Version 1.9 include a redlining function, where all project documentation can be converted to PDF format and subsequently made available for review and modification.

Enhancements include advanced signal detection and attenuation alarming capabilities.

The "Twin Turbo" FW-9100 supports core network applications like gateway security, load balancing and WAN acceleration.

Model PNC700 general purpose tension/compression load cell handles ranges from 100 lbf to 100,000 lbf and survives in temperatures from -65F° up to +400°F.

The 1063 allows very precise motor positioning and can be used to control larger industrial steppers with lots of torque.

IPPC-7158B has a passive backplane with up to 12 ISA/PCI expansion slots, a front-accessible design with water resistant cover, and a sealed front-panel.

The Bristol ControlWave remote terminal unit (RTU) has been integrated into the Ovation SCADA platform.

FLEXnet lets OEMs offer software applications that are activated only when a customer decides to turn them on through a software key.

ZIPLink cables eliminate the tedious process of wiring PLC I/O modules and terminal blocks.

Touchpad makes information retrieval, configuration, tuning, and troubleshooting faster without the need for an external local operator interface.

FLEXnet Embedded extends entitlement and compliance management capabilities to small footprint devices, including those running Windows CE and Embedded Linux.

The 3824 operates in a pressure range of vacuum to 200 psi, and has an ambient temperature range of -10°C to +50°C.

ZR20 small footprint rotary table is operated by a 2-phase stepper motor with a 20:1 ratio for fine resolution in a compact package.

S12 connectors mate to any fully threaded M12 on the market, are rated for 250 Volts 4 Amps, and provide IEC IP 67 protection.

Enhancements include MiMiC Server, Operator Training Manager, Studio instructor station, OPC Server, and a HIMA Simulated IO driver.

XMT sensors are available in diffuse reflective, focalized, polarized retro reflective, retro reflective for transparent, and through beam models.

Jumper cables are used to connect the PC board to a wireless device housing or case.

UFDC-1 and UFDC-1M-16 are available now in a 0.50 mm Micro Lead Frame package (MLF) for use in digital sensors and transducers.

EDS series IP-66 IP cameras with Power over Ethernet provide video over Ethernet.