Industry Products

ASIST5 terminal block accepts a crimped ring tongue terminal to eliminate the concern of wire connection security.

Rated at 1/20 hp at 230V, 107 series has an operating range from 6 to 90 Hz and a 15:1 range of adjustable output speeds.

OV3640 is a CMOS image sensor module that has image stabilization for capturing pictures at very low light and variable light conditions.

Camera link interface supports multiple thermal imaging cameras for a variety of automated process control and inspection applications.

UT 2.5-MT, -TG, and -MTD knife disconnect, component and feed-through terminal blocks with 2.5 mm2 cross sections save space.

Pico (M8) over-molded cordsets for actuator/sensor applications have an IP 67 / IP 68 protection rating.

LioN-Link bus couplers provide the connection between a fieldbus system and fieldbus-independent I/O modules.

AR-ES8020FL has a high reliability CPU (RDC R8610 supporting 133MHz), 64MB onboard memory, and 128MB onboard Flash storage.

Profibus Bus Interface Module (BIM) connects a Profibus-DP master with up to 32 8000 Process I/O modules and allows transfer of HART data.

ACCESSPLUS II double-hinged cabinet handles network equipment weighing from 250 to 500 lb.

DDW-120 Ethernet extender allows existing twisted pair cables to be used to establish a high-speed remote connection between two Ethernet networks..

SeaLINK/PC.SC and SeaLINK+2/PC.SC embedded USB to serial adapters are software configurable for RS-232, RS-422, or RS-485.

VPF-57 has a 10 ft. beam with adjustable arms which are equipped with suction pads for lifting appliances and similar products from the sides.

Enhancements include PDF support and on-demand 3D printing capabilities.

SHB102 uses the Intel quad-core Q45 Express chipset with low power consumption.

The test kit supports Temperature Transducer Blocks, Device Description (DD) 5.1 functionality, and Field Diagnostics Profiles for FOUNDATION fieldbus systems.

GR04.034 and GR04.035 mini gripper fingers with diameters of 14 millimeters are short, lightweight, yet deliver closing force of 24 or 23 N.

S4000TH has HART communications, is suitable for use in SIL 3 systems, and is approved by CSA, FM and ATEX.

improvements include a built-in battery compartment, eliminating the need for the older model’s external battery pack protruding from the main footprint of the assembly.

An MPG is a manually controlled rotary handwheel that a machine operator uses to move a tool incrementally along an axis.

Falcon FWI and FWO series provide wireless technology for use outdoors.

PLC Checker, for automatic coding rules verification, now supports PLC programs written with the RSLogix development environment.

Micro Motion 7835 Series density meter does not require barriers and galvanic isolators, significantly reducing installation costs in hazardous areas.

Measurement Studio 8.6 supports Visual Studio 2008, .NET and C++ class libraries, Microsoft Foundation Class Library (MFC) 9.0 and the .NET Framework 3.5.

Diamond tool suite now handles multiprocessor systems from signal processing specialist Lyrtech.

LDRA assists users of the Lauterbach’s TRACE32 debugger in fully automating the software testing process.

J Series frequency hopping data radio provides industrial Ethernet communications in the 900MHz and 2.4GHz license free ISM band.

RJ45, USB and RJ11 ATEX Ethernet connectors are for applications in zone 2 and Class I Division 2 explosive environments.

Decode support for IEEE 802.15.4 and ZigBee includes 6LoWPAN, SimpliciTI, and Synkro network protocols.

FFusb interface module provides access to H1 field devices over the USB interface of a desktop or notebook computer.

A300 is for smaller packaging lines where space is at a premium. It can accommodate a variety of packages in 30 inches of line space.

Gear Motor measures 2.14” in Diameter, by 7.75” long, and has a keyed output shaft of 12mm diameter by 25mm long.

WIM45 provides a direct analog output for determining the position of a piston magnet on all types of pneumatic cylinders.

Vortex A/C quickly installs on electrical control panels to maintain enclosure temperatures within a range of 80° to 90°F (27° to 32°C).

Remote mountable configuration is suitable for applications in hazardous areas or hard-to-reach locations.

MCS/MBF are available in diameters from 63 to 280 mm (2.48 to 11.02 in.), torque ratings from 5.5 to 500 Nm (49 to 4,425 lb-in), and 7 different frame sizes.

Tip-Seal manual valve is used in repetitive fluid dispensing applications where operators dispense short segments or long beads of material in adhesive bonding or sealing applications.

OD Precision sensor makes it easier to measure the x-, y- and z-axes for improved quality control.

OpenCV includes movement detection. facial recognition, object tracking, contour processing and image segmentation.

When using the Rapidform plug-in while gathering scan data from the Faro arm, the user literally sees the point cloud being captured from the part in real-time as the scanning process proceeds.

Enhancements include compatibility with Vista, and the ability to read DWG files v2.5 and greater and save files to AutoCAD 2004 and 2008 DWG file formats.

GS1 allows easy generation of DataBar barcodes from TrueType, OpenType, PostScript and PCL fonts.

HP planetary gearhead is available as stand-alone gearbox with a direct-fit or servo-coupling interface; or as a stand-alone 1-4 stage speed reducer.

HIPERDRIVE includes a motor, gears, absolute encoder and fieldbus communication capability for automated changeover on machines.

The system offers local and remote diagnostic alerts to warn personnel of any impending trouble with the valve/actuator or the valve communication and control terminal.

PCM-3202I supports two independent AMONet (Advantech Motion Network) RS-485 master rings with each ring controlling up to 2048 I/O points and 256 axes.

Actuator ensures constant and precise valve position in either the open or closed setting when electrical power is off.

Enhancements include an improved compiler and debugger, and Resource Tracking Window to locate potential resource leaks that can decrease system performance over time.

Power Engineering International, October 2008 By Tim Probert Technical failures in the power industry are not only difficult to avert but also extremely costly. To ensure the availability and reliability of steam turbines for power generation, this monitoring and testing system, based on hydraulic triple-redundancy, protects against undesirable turbine switch-offs.

Model 4710 contains a precision instrumentation amplifier, filtered output and a built-in excitation supply.

Plastic conveyors combine increased durability, improved performance and reduced maintenance in a quiet, compact package.

XP2i intrinsically safe digital pressure gauge is weatherproof and corrosion resistant, making it suitable for challenging environments.

Soft placement module gently lowers bottles into cases or trays without damage to the label, closure or container integrity.

Model CCSFU15CC18, a UXGA resolution (1600 x 1200) color camera, incorporates FireWire-B (IEEE-1394.b) technology for image signal output rates of 800 Mbps.

Accessories include a shunt release, auxiliary contact and alarm contact.

Enhancements allow users to securely tunnel HDA (Historical Access Data) data between OPC clients and servers.

Via IP over Ethernet, JR50 utilizes portable network access to remote assets such as field-installed controllers and intelligent sensors.

WINCAPS III saves users valuable development time by allowing them to program a robot on an offline computer, without the robot having to be in operation.

VWDIR33 AC right angle gearmotors have 1/12 hp dual voltage (115/230V), dual frequency (60/50 Hz), single phase permanent split capacitor electric motors.

SI-APPMOD Series of preprogrammed monitor and control solutions include a tachometer, counter, hour meter, timer, and analog ranging units.

miniMOORE family of multi-channel analog signal conditioners provides up to four I/O channels in a 1 inch (25.4 mm) footprint.

Tiny NET232 jr has an RJ45 Ethernet port on one side, and a short RJ45 serial cable on the other, a web server and email notification.

FactoryTalk VantagePoint allows end users to self-configure Web-based dashboards, trends and reports.

Enron Modbus is a modification to the standard Modbus communication protocol, used in chromatographs, flow computers, odorization systems, RTUs, and fire/gas alarm systems.

FactoryTalk ViewPoint software supports displays of FactoryTalk and Allen Bradley PanelView Plus applications via any Internet browser.

Twist-On wire ties allow end-of-arm tool builders to easily attach air hoses and or power cables to the tool.

Ultimate PAH automated label print and apply system can print on a variety of materials and apply labels to flat, angled, and curved surfaces.

SST Modbus and PROFIBUS modules support Add-On Profiles for integration into the ControlLogix system using Rockwell Automation’s RSLogix 5000 software.

FPM-5171G has Direct-VGA and DVI-D signal transmission, which allows a VGA control card to be used within a system.

eNetMeter monitors real-time network health to minimize downtime and predict imminent failures before they happen.

FactoryTalk uses a service-oriented architecture (SOA) to support applications in the automotive, CPG and pharmaceutical industries.

The utility in RSLogix 5000 programming software provides seamless integration with DELMIA V5R19 PLM software from Dassault Systèmes,

ET2 and ET5 Series unshielded transformers are available in 15 kVA through 75 kVA.

SM2316D-PLS2 and SM2316DT-PLS2 are complete servo systems with built-in controller, amplifier and encoder.

The level gauges provide reliable liquid level measurement through the use of a magnetic float technology which does not require external power.

DT9871U version for USB and DT8871U for Ethernet offer less than ±1.5 uV of noise and temperature accuracy of ± 0.15 degree C.

Software expands the decoding capabilities of the DataMan 100 vision-based ID readers to read up to 128 codes.

Auto-lockdown security capabilities allow a DeltaV user to automatically lock and unlock the port access of all the switches in the network.

Energy Chain E4.350 is wear proof, maintenance free and resistant to seawater and mineral oil.

PlantPAx systems and solutions cover process control tools, programming tools, process optimization, batch and sequence control, process safety, asset management and more.

SCADAPack 330E and 334E provide multi-vendor interoperability and reliable communications through native DNP3 and IEC 60870-5.

Computrac MAX 4000 has a web server that allows test results to be downloaded, and test parameters to be uploaded via a local intranet.

Power PMAC controls up to 128 axes simultaneously and has a built-in script language for both motion sequences and general machine and I/O logic.

Trinity MKJ Series connectors are up to 71% lighter and 52% smaller than larger, heavier MIL-DTL-38999 connectors with equivalent electrical performance.

With ampere ratings from 10A to 30A, 505 Series 6x32mm (3AB) fuse can safely interrupt fault currents at 500VAC/VDC.

Field kit monitors a building’s energy efficiency and indoor air quality, and transmit the information wirelessly.

Automation Systems Interconnect, Inc. offers new line of DIN rail mounted miniature circuit breakers that are UL1077 Recognized for use as supplemental protectors.

AC outlets include both DIN rail mounted modules and connector modules that can feed AC power through the cabinet wall in a wide range of socket configurations.

PICOe-GM45A has an Intel Core2 Duo processor platform with both PCI Express (PCIe) and PCI edge connectors on a half-size form factor.

Video Historian archives video that documents procedures in batch applications, provides visual proof of regulatory compliance, and monitors machinery.

MicroLogix 1400 controllers come with or without embedded analog I/O. Prices start at $795.

Facility Analytics provides a set of pre-configured, out-of-the-box reports and data mining tools for reducing costs, optimizing load factors, decreasing fault response times and achieving overall better efficiency.

Pulse SCADA/HMI application generator software enables application engineers to work with an unified environment regardless of the project deployment nature.

D12 detector monitors 30 gas quantities within the installation area using smart electrochemical gas diffusion sensors.

FCT Series can be used in the on-line analysis of molten polymers and other applications involving high temperatures and pressures.

The system provides the capability of rapidly monitoring up to ten separate sample locations with a single near-infrared spectrometer.

ESM and DSM Series devices are single and double switch modules, supplied ready to install with optional cables or connectors.

UPS line includes parallel redundant, single-phase 6 kVA and 10 kVA rack mountable units.

GE-100 Series 100W power supplies have an 88-264VAC input range and efficiency of 84%.

ADAM-5202 provides up to 128 communication slaves and supports distance communication of up to 100 meters.