Industry Products

SPH613 and SPH1013 series power supplies for 600 and 1,000 watts, respectively, require an installation width of only 56 mm for 600 W and 66 mm for 1,000 W. These power supplies can be used for a full range of industrial applications, offer flexible fixings (DIN-rail or wall mounting) and operate in any position at temperatures of up to +70° C.

FactoryPMI web-based SCADA system now has a plug-in that produces PDF based reports without the cost of individual client licenses or the need to physically install client software at each workstation.

RJFast converts a standard RJ-45 cable into a category 6 Ethernet connector compatible with industrial environments (including IP67) in a few seconds, without tedious, long and costly crimping.

ALAR series direct-drive rotary stages provide angular positioning and velocity control with exceptionally large apertures, load capability, and very high speeds. With the combination of a large aperture and direct-drive motor, the ALAR series offers significant performance benefits compared to worm-drive large aperture stages.

Panther terminals now have Device Net. These terminals can be integrated with process control equipment through a variety of methods, including Discrete I/O, 4-20 mA or 0-10 V analog output, Allen Bradley RIO, Modbus Plus, PROFIBUS and the newly integrated DeviceNet.

IND780 terminal comes standard with Ethernet, two serial ports and a USB master for an external keyboard. The terminal is capable of simultaneously supporting four scales and can provide a metrologically approved sum scale.

IND690 application terminal withstands all industrial environments whether the challenge comes from aggressive weighing samples, cleaning agents or a wet, corrosive, or dusty environment. It can connect up to four scales with a sum scale including any of these weighing technologies: analog load cells, high precision bases, analytical balances and BBK four-series scales.

Tru-Vue series photoelectric sensors are now available with 4-in-1 outputs. This enables a single sensor to operate in NPN normally open, NPN normally closed, PNP normally open, or PNP normally closed configurations. 4-in-1 simplifies sensor selection and stocking because one sensor model can now replace four sensor models.

The new interface provides flexibility for users performing standard weighing, blending or filling or checkweighing applications to interface with their DeviceNet network without the need for an external device. The IND560 built-in target controls can be used to create hybrid automated control systems for process and filling applications.

The Automated Precision Weighing Weigh Modules (WM and WMH) have RS232, RS422, DeviceNet, Profibus DP and Ethernet intefaces. The two products feature readability of up to 0.1mg with capacities of up to several tons. They are all available as intrinsically safe versions for integration in hazardous areas.

DT10, DT20, DMT10-2 and DML40-2 Distance Measurement Sensors allow customers to upgrade from simple detection to measurement applications where previously space and budget made it prohibitive.

Surge protection and wiring device products include surge panels, plugs, connectors and receptacles. 74000 and 75000 Series Surge Panels designed for facilities with 3-phase WYE-configured (4-wire + ground) systems where surge protection for all seven modes in the AC distribution network is required. Industrial Grade Black and White Locking Plugs and Connectors are available in 15, 20 and 30 Amp versions.

WebPort 2005 and WebPort 4005 industrial Ethernet gateway modules securely link serial devices or PLCs to an Ethernet LAN, allowing data access from any workstation. It connects up to four Ethernet-enabled control devices, offers serial connectivity to another controller, a modem for remote maintenance, and a WAN Ethernet port for connecting to the Internet or any IP network.

FieldPort FPIO-I8H-EIP and FPIO-I8H-EIP modules provide full analog capability, HART (Highway Addressable Remote Transducer) protocol, Ethernet-IP and ModbusTCP system interfaces, and work with Rockwell Automation and Schneider Electric Legacy PLCs.

Active Sensor Actuator Interfaces (SAIs) provide users with greater levels of wiring flexibility for achieving modular and decentralized process control in automation applications. The Active SAIs are available in IP 67 housings and support all industry network protocols including Profibus, DeviceNet and CANopen, as well as Ethernet, Ethernet/IP, PROFINET and Modbus/TCP.

The PCI-1625U is a self-contained computer with an onboard DSP processor that will take over the processing load from the host PC. It is designed for industrial applications where a PC needs to communicate with terminals, modems, or other instruments. A user can install up to four cards for total of 32 ports in any PCI bus-based PC.

DataBus IndustrialTuff PROFIBUS DP and PA shielded twisted pair cables deliver high performance and reliability in PROFIBUS factory automation and process automation applications. Cables are available with a selection of special jacket compounds, cable colors, and armoring options to fit application requirements.

TiR Series IR imagers help expert users accurately pinpoint building problems by combining both visible light and thermal images for better identification, analysis and image management. It has a 20 mm germanium lens on a 180 degree articulating mount to view images, even in situations where access is limited.

Ti Series thermal imagers are available in six camera models – the Ti20, Ti30, Ti40, Ti45, Ti50 and Ti55 – designed both for technicians with little or no thermography experience, and for predictive maintenance experts, process engineers and consultants who require the best thermal imagers.

DryLin ZLW is a lightweight, toothed-belt linear drive equipped with a hard-anodized aluminum profile, a DryLin W compact linear guide, and iglide plastic sliding elements. This provides a maintenance-free, self-lubricating, lightweight actuator for a linear drive system.

With ProcessMonitor MIMOSA, enterprise systems can access real-time and historical data and disseminate this information for Condition Based Maintenance, Maintenance & Production Planning and other maintenance and operational tactical purposes. Itincorporates both MIMOSA and OPC Foundation standards.

Two-piece N Male connector line features a quick fitting, cable insertion type connector with a captive internal contact. Minimal cable prep required. The cable conductor easily installs into the captive contact, which is designed for optimum electrical operation.

The S300 has a 270-degree scanning angle, which helps eliminate gaps in the area being safeguarded. This scanner also offers a selectable resolution of 30, 40, 50, 70 mm and is Type 3 (IEC 61496-3), SIL2 (IEC 61508). The S300 is ideal for applications where the hazardous area to be monitored is less than two meters.

These products have various MIL-STD certifications including MIL-STD 901D (Shock), MIL-STD 167-1 (Vibration), MIL-STD 461E (EMI), and MIL-STD 810 (Temperature and Humidity). Ideally suited for a number of military applications including navy, army, and air force, as well as other “extreme” and demanding operating environments, these products have already seen acceptance in various US Navy applications.

IndustrialTuff 1345F and 1346F cables are for use in ODVA DeviceNet industrial networking applications. Both feature TPE jackets, low-temperature performance, and weld splatter, oil, solvent and abrasion resistance for use in harsh environments.

The IPC-5120 supports a Micro-ATX motherboard with up to four half length PCI slots, and the IPC-7120 supports a standard ATX motherboard and up to seven half length PCI slots. Both chassis are RoHS compliant, bracketed for wallmount or desktop applications, and have front-accessible I/O interfaces and expansion slots.

EDDL enhancements for the CSI 9210 Machinery Health Transmitter, giving end users improved access to details surrounding the analysis results, thus enabling them to make even better operational decisions. New displays use familiar dialog boxes to present graphs, charts, and trending of dynamic variables, in addition to text and archived data, in a consistent, familiar format.

Powered by a VIA Luke processor with VT8237R Plus South Bridge chipset, the EP600 low power EPIC form factor single board computer (SBC) is an ideal solution for power-efficient and fanless operation applications. It is suitable for industrial and harsh embedded computing devices that require ultra low power consumption.

The Quattro Drive robot, claimed to be the world's fastest commercial robot, will be shown at the Pack Expo 2006 show in Chicago, IL. It is designed for parts picking and packaging applications.

Enhancements to the UniSort VII sliding shoe sorter include an all-electric switching system, aluminum slats for small-item sortation, and a 30-degree divert angle and standard widths to match the full line of FKI Logistex conveyor systems.

CitectSCADA Reports collects, historizes and delivers reporting data from multiple, disparate plant control systems. With it, users can visualize data from multiple SCADA systems in web browser; analyze this data with MS Excel; transfer data between control systems and MS SQL or Oracle databases; historize all control system data into MS SQL Server 2005; and report using industry standard reporting tools.

Belden has expanded its family of IndustrialTuff DataBus Cables for Fieldbus Applications to meet marketplace needs for versatile cabling solutions that meet Fieldbus Specification IEC 61158-2 (ISA/SP-50).

The Fluke 561 HVACPro multipurpose thermometer combines infrared and contact temperature measurement functions in a single tool for HVAC professionals. It gives users the option of deciding which temperature measurement method – contact or noncontact (infrared) – is most efficient and best suited for the application.

Municipal Water Packages designed for the water/wastewater industry combine Proficy™ HMI/SCADA – iFIX®, Historian and Portal products together in a variety of sizes. Municipalities can select the size of the system they need. They can start small and expand by increasing the tag size of iFIX or Historian applications, or adding Portal clients as needed.

NetBiter webSCADA gateway gives remote access to serial devices over Ethernet, Internet, LANs, telephone modems, GSM and GPRS. The gateway contains built-in features for alarm handling (SMS, E-mail, SNMP), data logging and web-based data access.

XPress DR+ Wireless is a rugged DIN-Rail mounted WiFi 802.11 Device Server for applications requiring environmentally hardened wireless networking gear. It is capable of connecting virtually any type of industrial equipment to the Local Area Network (LAN) or the Internet.

JetPort 5601f RS232/422/485 3-in-one to Fiber Ethernet device server connects RS232, RS422 and 2/4 wire RS485 to one Multi-mode or Single-mode Fiber Port. The serial port can work in various communication modes, including virtual com, TCP server, TCP client, UDP, and serial tunnel. The JetPort 5601f also supports HTTPS and SSH for secured communication management.

The UDS1100-IAP is a single-port Device Server which includes a built-in web server allowing end users to remotely access and manage attached equipment from a standard web browser. The UDS1100-IAP is hardened, operates within a wide-temperature range of -40ºC to +70ºC and supports industrial protocols including Modbus TCP, ASCII, RTU and DF1 to ensure device interoperability.

Rockwell Automation has expanded the FactoryTalk integrated production and performance suite with the availability of FactoryTalk ProductionCentre. Built on the FactoryTalk service-oriented architecture (SOA), FactoryTalk ProductionCentre provides manufacturers with improved process visibility, backward and forward product traceability, and quality assurance across multiple industries.

Economy modules for the line of BL20 I/O bus terminal systems allow up to 16 digital inputs and outputs to be connected using only 12.5 mm of DIN-rail space, providing signal density while considerably reducing the mounting width required. The modules contain integrated wiring and tool-free push-in spring-type terminal connections that save costs and provide quick and easy mounting.

AF Series sensors feature an easy to use sensitivity adjustment along with a keyboard so that adjustments cannot be changed once set. The small compact unit conveniently mounts onto a DIN rail and fiber optic cables of 2 meters can be ordered.

IndustrialTuff ControlBus Low-Loss Coaxial Cables for ControlNet features a continuously corrugated aluminum armored construction to ensure reliable performance in extremely harsh industrial environments. It also has an 18 AWG solid bare copper-covered steel conductor, foam Polyethylene insulation, Belden's Duobond Quad Shield and an inner PVC jacket.

Emerson delivered the company's 500,000th Micro Motion meter to Anheuser-Busch at a recent ceremony. This 500,000th meter was presented to Jeff Steinhart, Anheuser-Busch Vice President, Engineering by Tom Moser, president of Emerson's Micro Motion division, at the Anheuser-Busch corporate headquarters in St. Louis, Missouri.

M-Series sensors are currently being used to monitor liquid level in filler bowls—holding tanks that are used for gravity feed flow control for the dispensing of liquids into bottles or containers. The solution combines the magnetostrictive sensors with a sanitary pipe assembly and a tri-clamp flange that have been certified as 3-A compliant.

The Sitrans DA400 acoustic diagnostic system continuously monitors oscillating positive-displacement pump status and detects even the smallest leaks on pump valves. The system is comprised of four acoustic sensors mounted on the pump and a diagnostics device connected to the sensor by up to 65 feet of cable.

Sitrans P DSIII digital pressure transmitter is the first Profibus PA device available on the market that is designed for SIL2 safety shutdown in accordance with IEC 61508/IEC 61511-1. A Profisafe driver has been added to the standard pressure transmitter enabling the fail-safe transfer of the measured values via Profibus.

AE Solutions and Siemens Energy & Automation, Inc. have developed a new generation of fire & gas alarm and suppression systems. The pre-engineered, pre-configured, and pre-packaged FGS 1400 Fire & Gas System is FM approved and complies with NFPA 72 standards.

Sitrans TH digital headmounted temperature transmitters are compact in design, which enables them to be installed in the sensor connection head. The transmitter can communicate via Hart or Profibus PA and has galvanic isolation for thermocouple applications. Other models are designed for stand-alone applications.

SL3 Series stack light provides clear and distinct visual indication of machine status from anywhere on a factory or office floor. The lamp provides 360 of visibility, even in high ambient lighting conditions. Ideal for retrofits, the SL3 is designed as a drop-in replacement for a variety of incandescent bulb-based stack lights and signal towers.

Rugged Mini extends battery life and reduces time between re-charges. It consumes only six watts in standby mode, 18 watts in the on position while idle and 37 watts at 100 percent utilization. This compares to a typical PC using 75-125 watts. The solution provides a long operating time per charge cycle due to a fan-less, cool running design.

IndustrialTuff Variable Frequency Drive (VFD) Cables, designed to carry power from AC drive systems to AC motors, now includes four new 10 to 16 AWG, 600V UL 1277 cables incorporating a signal pair for brake applications. The cables feature an overall Beldfoil shield plus 85 percent TC braid shield for highly effective radiated and conducted noise protection.

Rack-mounted IndraMotion MTX compact provides high performance in a very small footprint while improving machine cycle times and part quality. It controls up to eight axes in two NC channels with a fast IndraLogic PLC. It can process up to 200 NC blocks per second and has a 30 block look-ahead rate to achieve shorter machine cycle times.

Model 2600-001-006/7 Tip-Seal dispense valve consists of a double-acting actuator, a 13.7” (350 mm) long extension nozzle and a carbide Tip-Seal needle to prevent dripping fluid material at shut-off. For high-volume fluid transfer, the Tip-Seal Valve can flow up to 6 gpm (22.7 lpm). For filling housings, containers and vessels, the optional level-sensing probe and controller can automatically stop flow when the desired fluid level is reached.

MENU for iFIX is a complete navigation system add-on for the Proficy iFIX control system from GE Fanuc. Navigation using MENU is immediately intuitive, with familiar functions like Back, Forward, Favorites and Home as standard. Users can add navigation links to standard iFIX functions like Workspace configure, Database Manager and Mission Control.

DataTuff Industrial Ethernet cables now include three new Enhanced 4-Pair, Category 5e Twisted Pair cables. Two are Low Smoke Zero Halogen, Unshielded, Enhanced Cat 5e cables, whle the other is a Waterblocked/Burial, Shielded Enhanced Cat 5e cable.

LabVIEW drivers for wireless sensor networks give engineers the ability to integrate ZigBee, IEEE 802.15.4 or proprietary wireless sensors into LabVIEW. The free driver software works with sensors from three wireless-sensing leaders – Accsense, Accutech and Crossbow Technology – and includes communication functions and example programs compatible with sensors from each vendor.

C-Series Core Sensor has a three-wire option that offers an alternative to high-cost sealed cables by replacing the connector and cover with three discrete wires that allow sealing against the wire insulation instead of a cable jacket. A simple grommet can then be used to provide tight water sealing.

NI Vision Builder for Automated Inspection (AI) Version 3.0 has a state-machine process model that gives engineers one of the most flexible environments available for configuring vision systems. With this process model, engineers can customize the execution flow of their inspections to meet a wide variety of machine vision challenges, from component alignment to part inspection and verification.

MPN series of brushless servo motors replace the now-obsolete N-Series motors recently discontinued by Rockwell Automation/Allen-Bradley. The MPN offers more torque per frame size than the existing N-Series motors.

Allen-Bradley CENTERLINE 2100 motor control center (MCC) ArcShield option helps reduce arc flash hazards while providing users with increased protection against internal electrical arcs. This version of the CENTERLINE 2100 MCC from Rockwell Automation provides arc flash protection in a low-voltage MCC (up to 600 volts).

Panasonic introduced two new rugged Toughbook computers: The CF-19 convertible tablet PC, and the CF-30 clamshell notebook. Both come with Intel Core Duo processors, security features, and optional embedded access to wireless data networks from all major cellular wireless carriers. In addition, these MIL-SPEC-certified notebooks incorporate daylight-readable screens.

Series 14000 brush-commutated DC motors and gearmotors feature 11-slot skewed armatures to minimize magnetic cogging (or reluctance torque) and promote quiet and smooth operation. They suit a wide range of power applications, including computer peripherals, imaging, and clinical diagnostics, among countless others.

EOTec 2104 Industrial Ethernet Ring Switch offers the performance features of a managed switch with the simplicity of an unmanaged switch. It comes preconfigured for ring redundancy, has self-healing ring topology, and allows for real-time data transfer with IEEE 802.3 Ethernet compliance.

Power Series solid state relays rol-feature 4,000 volts of optical isolation and include LED indicators that indicate when a control signal is applied, making it much easier for users to troubleshoot their control applications. The Power Series 240Di10, 240Di25, 240Di45, and 575Di45-12 SSRs have been tested, certified, and stamped as RoHS-compliant.

Enhancements to Avance 3.0 include serial data aquisition, flexible charting, OPC clients, data analysis tools, a python scripting integrated environment for data analysis. Avance manages, in real time, data from inputs such as manual input, Excel spreadsheets, text files, serial connections (RS-232), and OPC servers. Pricing for an annual license is $500.00.

The Easy-2-Combine tool is easy to use and can be accessed by anyone over the Internet. With the configurator, users can calculate and display entire handling modules online quickly and precisely. The configurator can compile a handling module (a pick-and-place unit, for example)without any extra calculation work. The configurator also provides complete documentation including CAD data for the user.

Enhancements in the SJ200-2 and L200-2 Series of inverters include Sensorless Vector Control technology, trip avoidance functions, side-by-side mounting, built-in timing logic and analog input math (PLC) functions, DIP-switch hand-off-auto, removable control terminal connector, and RS485 Modbus RTU communication interface. A CANopen option is also now available.

The Husky 10-port fault-tolerant Managed Industrial Ethernet Switch has a 2 Gbps backplane, 8K MAC address plus almost all the functionalities of a Gigabit platform switch but without the expensive Gigabit prices. Models HME-821 and HME-823 series can be remotely configured by a web browser, SNMP, Telnet, CLI and menu driven management.

Web-based Lean Tools is a collection of Web calculators that allow users to estimate potential energy savings to be gained by implementing various energy efficiency solutions, including lighting, transformers, drives, power monitoring, and power correction.

The SCADAPack Upgrade Kit features a 32-bit RISC processor, expanded 8 MB memory, and additional communication ports. Optional source level debugging software for C/C++ applications is also available. The total package installs in minutes in the field or factory, boosts performance by up to 100 times, and adds I/O capacity for thousands of analog and digital I/O.

EXTER Pro+ operator terminals have PDF and PowrPoint viewers and an Internet browser, making it easy to ensure that operator manuals, trouble shooting and service instructions always are at hand when they are needed. The PDF or PP files are put on a memory card that is inserted in the operator terminal before delivering the machine.

The PMG17 wireless and battery-free device is capable of generating useful energy from levels of vibration that are 35% lower than previously possible, and across a large bandwidth of vibration frequencies. OEMs, sensor manufacturers and end-users can benefit from using the generators to power easy-to-install devices that accurately monitor machinery and processes.

DNA-AI-225 analog input board has 25 differential input channels with 24-bit resolution and a maximum sampling rate of 1 kS/s per channel (25 kS/s aggregate for the board). The AI-225 has a separate A/D converter for each channel. This configuration eliminates the noise and offset errors associated with multiplexed inputs and at the same time allows all 25 channels to be sampled simultaneously.

Lanolinx Fiber Ethernet Switches include 100FX and Gigabit Fiber models, supporting multimode or single mode fiber. These switches also have 8 10/100 Copper ports and the Gigabit version has a 10/100/1000TX port. In addition, models are available with two fiber ports instead of one.

Aaxeon Technologies is proud to announce the release of new models in our Lanolinx line of Industrial Ethernet Switches. Following up on the successful initial introduction of the product line we have recently added a Wide Temperature option on several models. We have also added SNMP Management to our 8 port Managed switches.

RFID Small Rigid Tag is ideal for harsh industrial applications where ruggedness, chemical resistance or extreme temperatures are a factor. The Tag, is available in both EPCglobal Gen 2 and ISO 18000-6B protocols for worldwide use. The Tag measures 1.22x3.11 in. and is equipped with a wide band antenna that allows the tag to be used on virtually any surface, including metal, plastic and wood.

In response to increasing mandates for RFID-compliant shipments to retailers and the U.S. Department of Defense, Intermec Inc. and Informs today introduced the Informs RFID Experience in a Box Kit. The joint effort includes everything required to meet RFID compliance mandates, apply RFID tags and verify tag information.

The solution, which integrates control, information, implementation and support offerings, is a standard application designed to help brewers optimize production processes through improved process control, production visibility and business intelligence. As a result, brew masters can better manage their operations, improve throughput, reduce waste and decrease operating costs.

Magnum 6KQ Ethernet Managed Field Switch can be configured with up to 12 100Mb fiber ports, or user selected combinations of 10Mb, 100Mb, and Gig fiber ports of any fiber port connector types. The switches use ribbed aluminum cases to produce maximum heat dissipation in a rugged no-fans sealed package. They can be used in the harshest industrial-grade environments, and provide high EMI noise immunity.

QY series are rated from 1 to 50 amps at up to 80 VDC. At 13mm wide, the DC is the thinnest DIN rail mounted breaker on the market with a UL489 listing.

Data CELL FOUNDATION fieldbus cable is rated for ITC (instrument tray cable)/PLTC (power limited tray cable) exposed-run (ER) applications. This allows users to eliminate the conduit when the cable is installed in accordance with recent National Electrical Code (NEC) amendments.

The RS416 is an industrially hardened, modular 16 port serial device server with an integrated managed 4 port Ethernet switch, that can be used to aggregate many serial devices for Ethernet network connectivity. The RS416 operates in electrically harsh and climatically demanding environments like those found in electric utility substations, intelligent transportation systems, and industrial process control applications.

WCS2A/WCS3A PosiTrack Position Tracking System provides fraction-of-a-millimeter position feedback. PosiTrack consists of three basic components: a U-shaped read head; code rail and support hardware; and network and control interfaces. The read head optically scans a uniquely coded rail to determine a carrier position.

Glovia.com v9 ERP solution offers enhanced functionality based on a variety of insights obtained through first-hand implementation in Fujitsu Group factories in Japan and overseas. It delivers detailed production planning with hourly increments, synchronized production based on customer demand, improved operability, and enhanced visualization and optimization of company-wide supply and demand schedules.

Size 11 hybrid linear actuators are now available with encoder feedback. The compact optical incremental encoder is available with two channel quadrature TTL squarewave outputs. An optional index (3rd channel) output is also available for many resolutions. The encoder is offered in resolutions ranging from 200 to 1,024 cycles per revolution (CPR) or 800 to 4,096 pulses per revolution (PPR).

C6920 and C6925 Industrial PCs have 3-1/2 inch motherboards, Intel Celeron M or Pentium M processors up to 1.8 GHz, flash disk, and are rated for operation at ambient temperatures up to 131° F (55° C).

CAD-CONNECT Labeling Software generates labels quickly and easily within CAD programs such as AutoCAD and Visio. CAD-CONNECT eliminates the steps and time spent manually copying identifiers into labeling software.

CUB5 Series Analog Panel Meters have a footprint that is 30% smaller than 1/8 DIN meters and nearly half the cost. Multiple models are available to meet a variety of unique industrial applications, for example, measuring DC current and voltage, processing signals from flow meters, pressure sensors and positioning sensors, and accepting inputs from RTD and Thermocouple sensors.

The Swiss Center for Electronics and Microtechnology (CSEM)launched the ViSe miniature vision sensor system that enables broad-based monitoring and interpretation of visual data in real time, in any light conditions. It allows OEMs to develop application-specific image analysis and response systems aimed at automotive, security, building and home automation, and industrial markets.

Suitable for incorporation into OEM products, microAnalyzer has a miniaturized gas chromatographic module. The microAnalyzer will be available to OEMs for a wide variety of applications including process control, air monitoring, building monitoring, fenceline monitoring, environmental monitoring and situations requiring the detection and identification of trace chemicals.

The DNA-SL-501 serial I/O layer/board offers 4 fully independent, isolated RS-232, 422 or 485 ports with maximum data transfer rates up to 1 megabit per second in RS-422/485 mode. Ports are fully configured with software and different ports may have different configurations. Also released is a hardware Synchronization interface for the PowerDNA cube.

VEAM CIR Series connectors can function as electrical, optical or pneumatic connectors, providing design engineers with the ability to simplify receptacle design processes and inventory. The VEAM CIR connector is also available in high voltage, twin or tri-axial, hermetic and EMC versions.

Offering a range of 16, 32 or 48 individually optically isolated inputs or outputs, these cards are ideal for use in control and instrumentation applications where high-voltage protection is required. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others.

More than 200 enhancements to Proficy Plant Applications 4.3 Production Management software help users deploy Production Management systems faster and expand existing systems to tackle business challenges such as regulatory compliance, asset utilization, product quality, and speed to market. It also offers enhanced features for complying with industry regulations, ranging from the Tread Act to environmental mandates to 21 CFR Part 11.

Personal Lockout Kits are keyed-alike padlocks, which means that employees have fewer keys to carry and keep track of, simplifying the lockout process. The kits handle most of Brady's ockout products, which enable users to cover more applications and secure more types of isolation points with fewer devices. This results in lower equipment costs, simplified training, and more compact storage.

DRS21 CoreTech Incremental Encoders are now available in a programmable version. This allows customers to program the width of the zero pulse and the number of lines from 1 to 8,192. End users benefit from reduced inventory requirements. OEMs benefit by being able to use the encoder to determine the optimum PPR for their machine, while providing immediate reprogramming of the encoder to suit specific customer needs.

BradControl Classic I/O modules for DeviceNet come in an 8-port 16-channel format with a selection of I/O configurations supporting both PNP and NPN input devices. Each 60mm I/O module comes equipped with diagnostic LEDs providing status information on network, power, inputs and outputs.

The NA-806 fanless network application barebone is powered by onboard ultra low voltage Intel Celeron M 1GHz and zero cache processors, has four Ethernet ports, and supports fail-over, load sharing and load balancing functions for critical network environments. The NA-806 series fulfills high computing performance with fanless requirement for SOHO network security appliance markets.

Available for download, spindle selection matrix pinpoints the spindles best suited for withstanding the complexities of robotic machining. The matrix matches Dynomax robotic arm spindles with the most common material removal robots on the market, including FANUC, ABB, Kuka, Motoman and Staubli.

TPC-1261H rugged touch panel computer has an AMD GX3 LX800 500 MHz fanless processor and a 12.1” SVGA TFT LCD display with resistive touch. CompactFlash non-rotating storage media makes the TPC-1261H a durable and reliable platform, with the option to add a 2.5 inch HDD for additional storage where the environment permits.