Industry Products

The LVCM-025-038-01 features a continuous force of 2.5 lbs (11.0 N) and a peak force of 7.8 lbs (34.7 N) and the LVCM-025-038-02 features a 1.000 in (25.4 mm) stroke, whereas, the LVCM-025-038-01 features a stroke of 0.37 in. (9.5 mm ) and the LVCM-025-038-02 features a continuous force of 16.4 oz (4.6 N) and a peak force of 51.9 oz (14.4 N).

This controller is a two-channel motor output stage for BLDC motors used in MDRs, regardless of the conveyor or roller motor vendor.

With the update, it is now also possible for propulsion drives in Automated Guided Vehicles (AGVs) and the NGV gearbox range that is tailored to these vehicles.

The TWR-034-800-1RC has a total angular displacement of 34 degrees [0.59 radians] and a motor constant of 275 in-oz/sqrt(watt) [1.92 N-m/sqrt(watt)]. The voice coil motor requires 1.7 amps of continuous current per coil and 5.1 amps of peak current per coil to generate the specified forces.

A camera in FLIR Systems’ optical gas imaging (OGI) series, the connected GF77a provides upstream and midstream gas processors, producers, and operators with the ability to monitor continuously for invisible, potentially dangerous methane leaks at natural gas power plants, renewable energy production facilities, industrial plants, and other locations along a natural gas supply chain.

LP-22 series potentiometers are constructed to satisfy applications like robotic control, X-Y table feedback, injection molding machine slides, press or die arm position, control valve shaft position, and mil/aero test stands.

MARK Display brings essential information right where front-line workers in the supply chain need it most: the back of the hand.

The No Drip Internal Mix Atomizing Spray Nozzles work in the same way our standard atomizing nozzles do, but have the added benefit of positively stopping liquid flow when compressed air is shut off.

This kit is designed for those evaluating the Commander core for a new application, and need a complete setup to get started on software development and testing. The evaluation kit helps OEMs prototype and implement their motion control system.

Moore Industries can supply and assemble ready-to-install instrument sub-systems for customers’ control and monitoring needs with instrumentation, cabinets, wiring, tubing, relays, and power supplies.

Offered in both polarization maintaining and single mode fiber variants, these lasers can be optimized for wavelength tuning by temperature or current depending on the application.

This registration ensures that all WirelessHART users will be able to add Vanguard device drivers the next time they update their device descriptor (DD) libraries. It also assures users that they can add Vanguard systems to existing WirelessHART networks.

MHS Helix consists of template-based modules for equipment control, inventory management and order fulfillment functions, designed to work together in customized configurations according to each facility’s unique requirements.

Built on AutoGuide’s patent-pending modular design, the Max-N15 provides a common base that can be adapted for multiple manufacturing and warehouse material handling tasks with modular attachments to create lift trucks, tuggers or high bay pallet lift trucks.

The Koganei lineup of Cell Master all-purpose robots is designed to fit a variety of applications from industrial to workshops and hobbies.

The updated SORT 3.7 is optimized to integrate with continuous induction systems, such as cross belt or bombay sorters, as it can pick 400 units per hour consistently.

The SI-324-N is suitable for deployment in retail chains, shopping malls, airports, and banks to deliver video advertising and content.

The three- phase NORD UNIVERSAL motor is available in 20 models and provides a power range of 0.16 to 60 HP.

The beacons are based on the Nordic Semiconductor nRF52832 SoC and measure a 40.0 x 31.0 x 12.0 mm within a gray, plain housing, adaptable for many applications.

To meet different needs in automation industry, the eBOX710-521-FL has a flexible I/O window slot for customization and two swappable 2.5” SATA HDD drive bays with Intel RAID 0&1.

These pole mounted, solar power systems provide autonomous electrical power for telecommunications equipment, gate openers, security cameras and electronics, traffic devices, wireless radios, PLC/control panels, sensors, motors, and lights.

ROHM offers the simulator, ROHM Solution Simulator, that allows users to perform systematic verification of power devices and ICs

Based on the PICMG specifications for standardized COM Express heatspreaders they offer a cooling mass and surface area for 3.5-inch SBC designs

RC-Reporter works to bring clarity to building performance analytics with readable, reliable, and rational reports, delivered automatically by email, or integrated directly into building control systems.

Suitable for most common liquids such as water, alcohol, oils, and fluid greases, the flow sensor is designed for monitoring minimum lubrication or ensuring that the right amounts of chemicals or additives are metered out.

The latest release of Simcenter STAR-CCM+ includes enhancements to improve simulation time and accuracy as well as enhance collaboration, giving customers a digital twin to help drive predictive simulations.

The EMpro tracks energy parameters such as voltage, current, and power at the machine or system level. It then communicates that data locally, or transmits it to cloud-based services, creating an IIoT energy-monitoring solution.

The 3FG15 gripper has a maximum stroke of 150mm that can easily handle multiple processes. The three-finger design with a 15 kg (33 lb) payload provides a strong, stable grip for both form fit (internal) or friction fit (external) gripping.

The congatec Embedded Vision Platform is designed for embedded vision applications such as automated checkout systems in retail, surveillance and access control systems in facility management, industrial inspection systems for quality assurance, augmented reality for maintenance, and image processing in mobile and portable medical technology.

This solution is designed for Industrial Internet of Things (IIoT) devices, Edge Controllers, and high-end real-time hardware and workload consolidation.

The encoders can satisfy needs in a range of industries, including entertainment, material handling, mining and automotive manufacturing.

Multi-conductor flexible control cable from AutomationDirect is now available in 20 AWG unshielded models with 3 to 25 conductors including ground.

The Local Hand Station is suitable for applications such as large penstocks, where it is difficult to access the actuator due to height, in chamber applications where the actuator is located below the ground and space is limited or for control when the actuator/device may be in a hazardous location.

Honeywell Forge Energy Optimization is an autonomous building solution focused on decreasing energy consumption.

The WIN5 works with load cells in weighing measurement systems and is designed for simple industrial applications.

PC-DMIS 2020 R1 brings features, capabilities and an enhanced user experience to portable measuring arm operators and those who scan and create point cloud data.

At 59 mm wide, the 480 W UNO is intended to save space in the control cabinet. The 480 W UNO is UL Listed for use in Class I, Division 2 applications.

The unit supports a range of resistance welding technologies, including AC, DC inverter, AC inverter, transistor, and capacitive discharge. Featuring a user interface and color touch panel display, the MM-410A provides information on current, voltage, weld time, and force.

ITSENCLOSURES IO series enclosures are designed for use with flat panel monitors and thin client/small form computers. The operator interface enclosures are a solution for limited space environments.

The Gecko Single Pad (SP) gripper brings the same capability to automation applications with small footprints and lower payload. The Gecko SP is available in three sizes; SP1, SP3 and SP5 named after the gripper’s payload in kilos, featuring ability to lift a range of flat, smooth, shiny or perforated surfaces

Designed specifically for industrial and/or highly-corrosive environments, TAC and THP products operate on 208/230 VAC, single phase 50 and 60 Hz power sources, depending on size.

The solution consists of embedded hardware and supporting software framework, which can be further customized to suit the requirement of an embedded product or an IoT solution under test.

The Power over Ethernet (PoE) bridge is intended for use in manufacturing plants, restaurants and other spaces where water, cleaning solutions and other chemicals come into contact with monitoring equipment.

Because of their low voltage the motors of the APBA60 series are suited for battery-powered applications, such as AGVs or service robots. They are also safe for use in medical or other environments where standard AC servos would require additional insulation and safety measures.

The 125 x 95 mm system-on-module was designed for graphics-intensive applications over the Industrial IoT, including automation control, medical imaging, digital signage, and gaming machines.

Designed to provide real-time vision and control for timely response, this update to the EcoStruxure Power edge control portfolio keeps demanding operations running with new levels of cybersecurity and graphics customization.

AutomationDirect's 5-pole, M8 (Pico) quick-disconnect cables are available with axial or right-angle female connectors and pigtail wiring in 1.5, 5 and 10M cable lengths.

Users can generate QR codes, which can be opened out in the field. Layers Management ensures all changes are saved automatically. Projects can be completed with mass editing of project data using expanded navigators.

W-TYPE series industrial enclosures for aggressive environments are specially designed for industrial applications operating in where corrosive external agents are present such as saltwater sprays.

The dark web is a place where illegal and illicit activities occur; traditional businesses and email users are constantly warned about the dangers of their information being breached and ending up on the dark web.

The M16-X has a rated voltage of 50 V AC/60 V DC and is available with an optional female panel mount connector.

Designed specifically to meet the demands of applications in hazardous atmospheres, each sensor works on such a low current and voltage that it cannot ignite flammable material present in explosive zones

The cMT X Series features all the features the cMT Series does, such as cMT Viewer, EasyAccess 2.0 built-in VPN with pass-through, IIoT capabilities with MQTT and OPC UA protocols, and over 320 communication protocols. Peripheral connectivity remains in the cMT X Series with dual ethernet ports, RS232, RS485 2-wire/4-wire, CAN Bus communication ports, USB host port, and built-in mono-speaker.

The Picavi Cockpit tool generates smart data for managing, maintaining, and customizing the screen of the Pick-by-Vision glasses: analytics, mobile device management (MDM) and configurator.

Its dimensions are 3.6(L) x 2.1(W) x 3.5(H) inches and the series is available with Intel Celeron J3355, Pentium J4205, or Atom E3940 SoC processor options.

The AX / KX solution is designed for maximum space availability. The AX, now with larger gland plates, creates more space for cables. In addition, integrated locators enable incorporation of the interior installation rails. These rails also support dynamic loads seen in many industrial environments

ForwardX robots depend on V-SLAM with Deep Learning techniques for positioning and navigation. They will be on display at booth 1207 at MODEX 2020

Also known as an electric cylinder, this direct drive linear motor is 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long. Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft.

AutomationDirect CLICK PLC units are brick/stackable PLCs with the processing, memory, communication and I/O interface needed in an automated control system.

Through a catalytic combustion process, the Fugitive Emission Eliminator oxidizes the vented sample, converting hydrocarbons to CO2 and water vapor, while maintaining a stable outlet vent pressure to the atmosphere.

Threaded Line Vac Conveyors eject a small amount of compressed air to produce a vacuum on one end with high output flows on the other. Response is instantaneous and regulating the compressed air pressure provides infinite control of the conveying rate. Applications include scrap trim removal, material conveying, part transfer, fiber tensioning and filling operations.

The Prosonic Flow G can be supplied with either of two different transmitters: as a compact version (Proline 300), or as a remote version (Proline 500) with up to four inputs and outputs.

Softing's uaToolkit Embedded has been certified in the Compliance Lab of the OPC Foundation for the Nano Embedded Device Server profile, the Micro Embedded Device Server profile and the Embedded UA Server profile.

ADISRA SmartView allows users to develop effective interfaces displaying the critical information they need to deploy, monitor, and analyze a machine’s operation and overall status.

The offers – Standard, Professional and Premium – feature SOLIDWORKS standard, professional and premium applications that are installed from, licensed from, and updated in the 3DEXPERIENCE platform, with data stored in it.

Allen-Bradley 855X Hazardous Location Signaling Devices are designed to help industrial operators meet the latest global hazardous-location ratings and certifications. The signaling devices include horns, beacons and combination horn-and-beacon units.

The 250V STSPIN32F0251 and STSPIN32F0252, and 600V STSPIN32F0601 and STSPIN32F0602 combine three-phase gate drivers and an STM32F0 Arm Cortex-M0 microcontroller for high-voltage Brushless DC (BLDC) motor drives.

The measuring concept of the Promag W (0 x DN) features multiple measuring electrodes to detect flow. These electrodes generate a higher density of measured data than standard devices. Together with the refined signal analysis, measurement results are realized in swirl conditions.

The PICO-WHU4 features the 8th Generation Intel Core i3/i5/i7 and Celeron processors (formerly Whiskey Lake) combined with support for up to 16 GB of DDR4 RAM.

The FM drives are equipped with an additional interface board with standard connectors.

The L6983C enters pulse-skipping mode when the load current is below 0.6A while the L6983N, suitable for noise-sensitive applications, stays in PWM (pulse-width modulation) mode at all loads to minimize electromagnetic disturbances.

With the integration of 2DMI with the Leuze DCR 200i range of camera-based code readers, customers are now able to capture transaction and authentication information automatically anywhere in the supply chain.

The device is suitable for use with both brushed DC and brushless EC motors (BLDC) of up to 120 W and has comprehensive feedback options such as Hall sensors, as well as digital incremental and SSI absolute encoders.

The FS-3200T-10GE-NNC model features Bayer and monochrome versions of the Sony Pregius IMX252 CMOS sensor offering 3.2-megapixel resolution (2048 x 1536 pixels) and a 1/1.8” optical format.

AVEVA’s digital tools enable access to production information, KPIs and notifications on dashboards, workstations and mobile devices to improve overall equipment and labor effectiveness, and to facilitate data-driven improvement.

The Type 7150 combines the technology of the ControlAir Type 200 Precision Air Relay with the high forward and reverse flow of the Type 6100, 1:1 Relay Volume Booster.

These Yaw-Pitch-Roll stages are designed for the measurement of compound angles or the curvature of an object.

Using a corresponding master, the level controllers can be connected to any common bus system and conveniently parameterized via PC or notebook. The guided microwave measuring principle ensures reliability due to its insensitivity to external influences such as temperature, pressure, or density.

The single-direction AGV was developed for a specific application with detailed requirements to support the user’s “around the clock” operation. Creform developed four AGVs for this specific job recipe to act as transfer vehicles between conveyors at multiple points in the manufacturing process.

ÖLFLEX VFD 1XL cables feature XLPE (Plus) insulation which results in a reduced cable outer diameter (OD) making it possible to install more cables into cable trays/cable carrier systems, or to downsize protective cable conduit systems.

The SDx Connector for OSIsoft serves as a bridge between the two technologies, interfacing historical and real-time data from the PI System into Hexagon’s models to provide plant managers, executives and engineers greater visibility.

The provisioning services enable IoT devices containing the eSIMs to connect automatically to cellular networks. Each of ST’s appointed partner/operators can access hundreds of cellular networks of all types including 2G, 3G, 4G, LTE CAT-M (low-power wide-area connectivity), and NB-IoT (narrowband IoT), in large numbers of territories worldwide.

Advantech’s UNO-247 is a platform that ensures installation with applicability and integration potential. To reduce system downtime and ensure maintenance, the platform’s mechanical design has been improved to enable memory installation/swapping without disassembling the entire chassis.

Each module operates as a standalone Modbus TCP server, and can be remotely configured via a built-in web server.

This virtual reality-based (VR) solution gives personnel simulated hands-on experience to prepare for any plant event, helping them make better decisions regarding operating changes and practice proper procedures before entering potentially hazardous plant areas.

These applications work to empower engineers and scientists in process manufacturing organizations to analyze, predict, collaborate, and share insights.

The PV3 is designed as a solution for companies needing large roll capacity, battery life, connectivity and built-in dispenser functionality.

The first shipping version of groov RIO is the GRV-R7-MM1001-10, a standalone, 10-channel, multi-signal, multifunction I/O unit for signals including thermocouples (TCs), integrated circuit temperature devices (ICTDs), voltage inputs, current inputs, millivolt inputs, discrete DC inputs, self-wetting discrete inputs, discrete DC sinking outputs, and Form C mechanical relays

With Proficy Operations Hub 1.5 from GE Digital, users can make decisions based on real-time and historical plant-wide application data collected from tools across an organization’s portfolio of data historians and manufacturing execution systems (MES), independent of location.

The size of these Wenglor sensors makes them suitable as drop-in replacements for other rectangular photoelectric sensor brands. Sensing ranges vary from 1200mm for background suppression sensors to 20m for through-beam models.

HM White’s Energy Audits leverage over a decade of experience gained from energy conservation projects at multiple industrial plants nationwide.

The OSA +Flow family embeds Flow-Cal measurement applications into the Bedrock Automation platform. Flow-Cal’s software is a choice for flow measurement and production-accounting data.

iRISK is designed to provide vulnerability assessment reporting for OT networks, including risk prioritizations and mitigation recommendations.

The software leads users through the redlining process with which they can view and comment on changes to the project. This helps facilitate communication and collaboration across projects, across disciplines and across companies.

The smart distribution center solutions will include the North American debuts of the EP7402 controller for motor-driven roller (MDR) conveyors, TwinCAT/BSD alternative operating system (OS) for Beckhoff PC-based controllers and C6025 ultra-compact Industrial PC (IPC). The eXtended Transport System (XTS) will also make its MODEX debut at the Beckhoff booth (4026).

The services support the full spectrum of ICS/OT/IoT maturity, from early-stage IoT adoption, health checks and strategy validation, to full-lifecycle risk management.

The valve offers a close-off pressure of 75 psi (5.2 Bar) ensures a safe shutoff in the event of a fuel train system failure and eliminates the need for additional safety components

The X-410 offers the ability to log a variety of data points such as local and remote I/O, registers, tasks, and voltage. Log entries can be made at preset intervals, scheduled times, triggered by I/O changes or logic events. Users can schedule a daily log file to be sent via email or uploaded via FTP server.

The four solutions relate to Ignition by Inductive Automation. Ignition is an industrial application platform with tools for building solutions in human-machine interface (HMI), supervisory control and data acquisition (SCADA), and the Industrial Internet of Things (IIoT). Ignition is used in many industries, in more than 100 countries.