Industry Products

The controller combines a Simatic S7-1500 controller with motion control, technology and safety functionality with a Sinamics S120 drive control in one device.

These drives accept a range of input voltages (12-110 VDC, 18-80 VAC) and provide over-voltage and overcurrent protection, motor auto-configuration on power up and Soft-start at power on. Motor output current ranges from 0.3 to 7.2A.

HMB-6100, designed to HybridTCA compute specifications, is compatible with Lanner’s x86 HTCA-6000 series network appliances to boost data center performances, bandwidth and connectivity for telecom applications.

The Model 54141A complies with the VITA 65.0 3U VPX specification, it also offers analog and digital interface options for the VPX P2 backplane connector to meet system-specific requirements.

Interoperability between Adaptec Smart Storage adapters and MegaRAC SP-X manageability firmware powering embedded base management controllers (BMCs) reduces data center operational costs by enabling remote management capabilities including platform status monitoring and problem notifications, diagnosis and recovery.

The combination of Softing's mobiLink interface with the Field Xpert SMT70 or SMT77 Tablet PC from Endress+Hauser offers users a system solution for configuring and parameterizing field devices for the most important process automation protocols - HART, PROFIBUS PA and FOUNDATION Fieldbus

With the CMS 700i, Leuze electronic is bringing a 3D contour measurement system to market. It is based on the CML 730i measuring light curtains and can be adapted to specific customer requirements.

The universally interchangeable design provides flexible installation with C-face and TC-face inputs, perpendicular output and 6 mounting positions. Five gearbox sizes support 56C up to 254/6TC NEMA motor frames and 6 ratios are available from 10:1 to 120:1.

EasyIO launched the FT-04, a 2 x 2.4 inch controller for many applications. Wi-Fi only, it can extend control to anything that needs connectivity, control, and monitoring.

FCI's wet gas (WG) sensor delivers gas flow measurement in the presence of moisture and condensation droplets. Available with the Model ST80, this WG sensor can be applied for use in entrained moisture and rain-shielding applications.

The NCA-6110’s specs include its support for up to 512GB DDR4 2666MHz ECCR-DIMM, dual GbE RJ45 ports, 4x or 2x 3.5” or 2.5” swappable bays, 1x RJ45 console port and 2x PCIe*8 FHHL or 1x PCIe*16 FHFL.

The Allen-Bradley Kinetix 5100 servo drive has multiple control modes available to support a range of high-speed, low-power motion control applications.

The voice coil stage (VCS02-005-BS-01-MXYTh) is a closed loop positioning system that can be used for positioning applications that require a limited rotation theta stage integrated. The stage utilizes a custom low-profile design that utilizes a unique electromagnetic circuit design.

The FS-3200D-10GE and FS-1600D-10GE cameras have two-channel dichroic prisms that divide the incoming light to two precisely-aligned CMOS area scan imagers.

POSITAL’s Hollow Shaft Kit encoders feature an integrated rotation counter that records each revolution the instrument experiences, even if these occur when no external power is available.

The first device applications of the protection relay will be overcurrent and earth fault protection and transformer protection in substations.

Shielded constructions include both a tinned copper braid shield and aluminized polyester foil overall shield. The cable's outer jacket is pressure extruded Thermoplastic Elastomer (TPE) with moisture, chemical, UV and weathering resistance,low temperature flexibility, and good flame and fire resistance.

Three pump families in the Vortik series - VPs, VPm, and VPg - are based upon general volume ranges, and each includes models for dispensing one-component (1K) and two-component (2K) fluids.

With the ability to operate in temperatures between -40°C to +85°C, the XMC477RC is designed for naval/marine-, land- and air platforms within defense and aerospace markets including fire control systems, airborne mission computers, radar systems and flight control.

In order to enhance the reporting options, a batch report with a basic choice of process parameters has been integrated. Users can now create reports with the help of MS Excel. Braumat V8.0 is also now connected to the established PM- Quality option.

The products were developed for use in power generation turbine research & development and rotating asset monitoring in nuclear facilities.

The configuration makes the OPTIV M future-ready and compatible with a portfolio of contactless and tactile sensors, software and collaborative technologies.

AMCI’s SV160E2 Integrated Servo Motor includes an integrated dual port switch with EtherNet/IP, Modbus-TCP, & Profinet connectivity. The SV160E2 incorporates a servo motor, drive, and controller in a single unit.

The HB3-Compact (HB3-C) offers the possibility for vertical or horizontal mounting and uses maintenance-free vacuum switching technology. These features make it suitable for retrofit applications in power plants, where the security of supply is crucial, and space is limited due to existing installations.

HotBackup is a solid state ‘live host’ backup solution suited for use in process and mission critical legacy computer systems in a range of applications in the telecommunications, semiconductor manufacturing, industrial process control, engineering and manufacturing, oil and gas, mil/aero and media post-production industries.

This in-vehicle system is certified with CE and FCC and is in compliance with ISO 7637-2. Axiomtek’s UST100-504-FL features a single-sided I/O design for space-limited vehicle applications. The vehicle PC is powered by the LGA1151 socket 7th/6th generation Intel Core or Pentium processor with up to 35W TDP and comes with the Intel H110 chipset

The Series 273 features a pinching mechanism that remains firmly in place to provide better tube retention and eliminates breakage or damage to the soft tubing

The NCA-6210 will be Lanner’s first NFVI-ready network appliance verified as an Intel Select Solution for NFVI FP (expected in Q4’19). Optimized as a NFVI platform for virtualized network function (NFV) software,

These plastic limit switches have standard U.S. 25mm mounting hole spacing; housings are double-insulated and epoxy resin-filled, providing IEC IP67 protection. Contacts are Snap-action (Z11) with 1 N.O. and 1 N.C. contact on all units.

With three spectral models–measuring at wavelengths of 1 µm, 1.6 µm, and 2.3 µm, respectively–the full Thermalert 4.0 lineup can measure temperatures between -40°C and 2,300°C and is ideal for applications where non-contact temperature monitoring is critical, such as metal, steel, or glass.

The Flexy gateway pulls data from any supported PLC from ABB, Rockwell, Siemens, Mitsubishi, Omron, Eaton and others. Canary’s Enterprise Historian is configured to pull PLC data from Flexy’s embedded OPC-UA server, and data flows automatically from Flexy directly to the Canary Historian.

With the service portfolio including Mindsphere app, Siemens is focusing on the operative demands of machine users, who are looking for full transparency for spare parts and servicing.

This release expands the capability of XLReporter for Web reporting, 21CFR Part 11 features and ISA18.2 Alarm Management.

The MRD-455-NA is well suited to industrial applications where machine to machine communication is vital. It has a design with all interfaces and LEDs at the front, DIN-rail mounting, isolated power supply and an operating voltage range spanning from 10 to 60 VDC.

Zettlex sensors use printed circuits. This enables position sensors with no contacts. IncOders are suited to environments where potentiometers, optical or capacitive devices may prove unreliable.

The Sirius 3RW55 Failsafe soft starters are suited for starting and stopping operations of high-power motors with a rated output of 5.5 to 560 kilowatt (kW) at 400 volts (V).

The VP460 Direct RF Processing System is aligned with the SOSA standard to deliver the interoperability required by the US Air Force, Army, and Navy.

Vortex flow sensors are intended as a method for measuring flow of water-based liquids that is independent of the liquid's pressure or temperature fluctuations.

Developed on the Keysight PathWave software platform, the PathWave Test 2020 software suite enables 5G, IoT and automotive engineers and managers to streamline test data processing and analysis to speed product introductions.

The transmitters are available with an integrated Bluetooth interface that enables users to wirelessly display measured values and perform configuration tasks. The device is operated using Endress+Hauser’s SmartBlue app.

The 1 mm per turn lead screws and crossed roller bearings are used in these black anodized stages. They are suitable for: Sampling, assembly, sorting, testing, laser drilling and machining, and positioning in lab and manufacturing environments.

The 3Xi-M110 reduces the dose and exposure to X-rays during inspection and features soldering quality inspection functions for PCB assembly applications.

Key to the transmitter is its use of interchangeable communications and sensor modules enabling the transmitter to be upgraded as required without having to purchase additional units. Modules for HART, Profibus, Modbus or Ethernet communications and ABB’s digital EZLink pH/ORP, conductivity, dissolved oxygen or turbidity sensors are available.

StratEdge uses an automated system in a cleanroom environment to perform eutectic AuSn die attach of compound semiconductor devices that have a backside gold surface finish.

The WSEN-PADS absolute pressure sensor offers the possibility of preparing the measured data for various applications using activatable integrated algorithms in such a way that the programming workload for a connected controller is reduced.

The DS1202Z-E comes standard with 2 analog channels, 24MPts of deep memory, a 60,000 frame segmented record mode, standard serial decode and triggering, high resolution FFT, 15 trigger types and 37 integrated measurements making the DS1202Z-E a debug tool for design engineers.

The EyeVision software supports all setting options, also the adjustment of the depth of field. Therefore the EyeCheck always delivers images, from a distance to the object of 25 mm onwards.

The NCA-1513 features Intel’s QuickAssist Technology, offering cryptographic acceleration and commercial-grade LAN functions in a 231mm x 200mm x 44mm (WxDxH) form factor.

The primary difference between these two families of DC/DC converters is the TEN 40E has 2:1 input ranges of 9-18 / 18-36 / 36-75 VDC versus the TEN 40WIE series with 4:1 input ranges of 9-36 / 18-75 VDC.

Eaton XT series electronic overloads have a broad full-load-amperage (FLA) range (0.33-175A), selectable trip classes (10A, 10, 20, 30), and can be separately mounted to NEMA, IEC and DP contactors.

The 12” tablet is designed to provide the mobility and connectivity to help field users stay productive. Updated features include an 1000 NIT FHD display with anti-glare coatings, allowing customers to access and showcase their work even when out in direct sunlight.

This voice coil motor is designed for applications such as: Pick-and-place, testing, laser steering, laser speckle reduction, mirror positioning, scanning, oscillation, switching, clamping, and haptic feedback in hand held medical, dental, or industrial applications.

Vision Insights powered by Xi IoT is a supply chain optimization solution comprised of Hardis Group Vision Insights software running as a container on the Nutanix Xi IoT platform.

scanCONTROL 3060-25/BL laser scanners are designed for measurement tasks with high demands on resolution and accuracy. Therefore, these sensors are primarily used in automation tasks, production and process monitoring as well as quality control.

The capaNCDT MD6-22 offers touchscreen operation. Furthermore, different features are preset in the factory such as automatic gap detection, for parallel alignment of the flat sensors for double-sided measurements.

Particularly useful for small to medium-sized businesses, the SaaS framework offers new tiered product bundles in which customers can select the right level of capabilities they need, as well as monthly subscription-based billing and licensing and a pay-per-use computing infrastructure.

ReadyPack is a smaller version of SOMIC’s 424 T2 (D) machine and completely different than the larger SOMIC FLEXX III that was introduced a year ago. ReadyPack is also designed with a slower collating speed.

This product features mixed analog and digital inputs and outputs, which accept a variety of standard sensor and signal types including thermocouples, RTD’s, voltage, and 0-20 mA current.

The RT PolarFire FPGA is supported by all necessary radiation data, specifications, package details and tools customers need to start new designs now, initially with the commercial version of the device.

The CEMC Series actuator has a set of built-in sensors which stops them from being exposed during the manufacturing process without impacting on the overall dimensions of the actuator.

The ICO320-83C offers expandability and I/O, including four RJ-45 Gigabit PoE ports or four RJ-45 LAN ports, two RS-232/422/485 ports, two USB 3.0 port, one VGA port, one CANbus 2.0 A/B port, and one 8-bit programmable DIO.

iTwin Services enable engineering firms to create, visualize and analyze digital twins of infrastructure projects and assets. iTwin Services federate digital engineering content from BIM design tools and multiple data sources, enable “4D visualization” of digital twins, and log engineering changes along a project/asset timeline, to provide an accountable record of who-changed-what-and-when.

Sciemetric EDGE delivers a universal platform to control a variety of manufacturing and industrial processes. This distributed data analytics system works to remove barriers to continuous process monitoring.

Through a partnership with parent company Pimsoft, Emerson is providing customers with an enterprise-wide platform designed to validate the accuracy, reliability and usability of plant measurements.

In an effort to further optimize data intelligence, the latest version of Crimson has the ability to use expressions in filters for SQL queries. This allows operators to pull a subset of data from a SQL database based on dynamic search criteria.

The EventCam is specifically designed for the detection and analysis of sporadic errors in industrial processes. It can be integrated into stationary and mobile applications, is network capable, and delivers single frames and video sequences in for error analyses.

CODESYS Automation Server provides numerous functions demanded by Industry 4.0 architectures, When programming controllers via IP-based networks such as Ethernet or Internet, users can now secure their expertise and data by means of encryption, password, security key, or X.509 certificate.

The Lightning edge computing platform brings intelligence to the edge, at or near the point where data originates, and facilitates analysis with the lowest latencies to improve operational outcomes.

This joint solution is designed with application capabilities to foster collaboration and enable users to meet the demands of growing engineering complexity.

ABB Ability Remote Insights for service uses commercially available headsets to assist field service technicians and expand the reach of ABB subject matter experts. The technology enables a field service technician to share his or her view of a situation using the device’s camera, and receive guidance directly from an expert through on-screen annotations, chat, and document sharing.

The Picomag update enables measurement of flow of electrically conductive fluids and the process temperature and conductivity. It enables commissioning with Bluetooth using the SmartBlue App and integration with IO-Link technology.

Discrete models are available with adjustable sensitivity and one sensor can be standardized for many materials. Operating voltages from 10 to 30VDC are available; temperature ranges up to +70C are now offered on some models.

Phoenix Contact’s PLCnext Technology gives developers a control platform that combines traditional IEC 61131 programming with open-source languages like Linux.

For system integrators and engineers, the I/O modules provide more options for bringing existing devices into groov EPIC, as well as meeting requirements for temperature control applications. They also include designs for mixed signal types, signal isolation, and channel density:

In this integrated solution, iSID’s asset inventory now incorporates the asset information stored in the Asset Guardian database, including the detailed asset information that is not available from traffic monitoring.

Built on the ACR9000 platform, the ACR7000 family utilizes re-imagined hardware designs, designed for tabletop and laboratory style instruments.

The Model 204 water analyzer works to provide capability for environmental pollution control for wastewater treatment plants that must measure VOC contaminants to ensure water is properly treated before released, chemical/ petrochemical plants that measure VOC directly in the water.

CPX-AP-I enables valve terminals to be moved closer to pneumatic cylinders. Process data in and out of each bus module is as much as two kilobytes. Scan cycles for a mix of both valve terminals and I/O are below one millisecond.

Antaira Technologies’ low-port-count managed switches are industrial-grade devices that are Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

As with the first EyeSens generation the sensors can communicate with an SPS via the Profinet communication protocol. In addition, the EyeSens supports Modbus as well as TCP/IP and UDP communication.

The SRAP system consists of a Flexi Soft safety controller and a safety laser scanner – either the S300 Mini Remote for shorter scanning ranges or the microScan3 Core for larger monitoring fields. Safe Robotics Area Protection satisfies the criteria of Performance Level PL d in accordance with EN ISO 13849-1.

These IoT sensors offer range, accuracy and the ability to operate in harsh environments typically found in utilities, oil and gas, water and wastewater, factory automation and food processing industries.

The Model 410C01 signal conditioner is set up using a software interface, and DIN rail mounting with standard 24 VDC power. It provides a broad frequency range and a zero reset that synchronizes with machine cycle times.

Actin version 5.5 adds Actin Viewer enhancements, Motion Script updates and G-code support, for robotic systems developers to focus on the robot’s tasks rather than joint movement and paths.

TM1 Series stroke lengths are from 50 to 2,000 mm in 25 mm steps. Operating pressure is up to 5,076 psi (350 bar) with peaks to 6,526 psi (450 bar). Both plug-in and screw type flange models are available.

These DC-powered metal sensors work to provide accuracy in minimal mounting space and are designed for use in a variety of short or long-distance sensing applications.

Designed for any simple application, the Micro OCS controllers can perform in multiple industries from water treatment, to food processing, to HVAC/Environmental control and many others.

The Vectis system comes with all hardware provided fully integrated onto a 3ft x 6ft mobile modular fixturing cart enabling metal fabricators to bring the cobot to the work, or the work to the cobot with no anchoring nor dedicated footprint required.

The DRS-206-05-012-01-EX dual rail positioning stage is designed for applications that require long travel distances. It uses a cog-free brushless linear motor to generate a continuous force of 12.4 lbs [55.6 N] and a peak force of 37.4 lbs [167 N] with a total stroke length of 210 in [5341 mm].

The 87V MAX has an IP67 rating making it fully waterproof and dustproof, and has been tested to withstand a four-meter (13 foot) drop. It has an operating temperature range of -15 °C to +55 °C (5 °F to 131 °F), as low as -40 °C for up to 20 minutes, and can operate in up-to-95 percent humidity.

This solution is designed for paper, pulp, tissue, board, extruded film, calendaring, lithium-ion battery, copper and aluminium foil producers.

The software specifically enables customers to retain control of their data while providing integration with other inventory management, warehouse and ERP systems so that all stores, distribution centers and corporate offices are networked on the same platform.

Like the original CONTACTRON, the pro modules incorporate Phoenix Contact’s Hybrid Technology, which offers three-phase motor switching up to 5 HP. It has a service life of up to 30 million switching cycles.

All Inertia Dynamics clutches are recognized by Underwriters Laboratories to both U.S. and Canadian safety requirements.

NITRA coalescing filters are available with manual drains, semi-automatic drains that can be manually operated, or fully automatic drains. Polycarbonate or nylon bowls with metal guards are available on all sizes and all-metal bowls with sight gauge are available on larger 3xx and 4xx sizes.

Expanding upon MSA’s highly intelligent TruCal® sensor platform, the launch of its new industry-first Diffusion Supervision technology listens for and alerts plant technicians to blocked electrochemical sensor conditions.

Available in five surface-mount and through-hole packages, these components expand the Littelfuse TRIAC product line by making 150°C maximum junction temperature devices available in 600V to 800V with ratings of 12A, 16A, 25A, 30A and 40A.

Mencom’s LP1-E45UM-5 Low profile Panel interface connector has combined two of the most common and versatile components utilized by today’s integrators, machine builders, and panel shops.

This current sensing module is a tool for new and existing systems where an added level of monitoring and protection is required.

The MELIPC Series is targeted towards OEMs and end users running general manufacturing applications, and especially those who require a computing and data monitoring solution that takes up a limited amount of space with a small footprint.