Industry Products

The integrated stepper motor controller and motor driver allows for control, and the worm gear allows for continuous rotation. Zaber devices allow daisy-chaining in a vacuum chamber.

The tools add trend analytics to manufacturing metrics of compliance, utilization, maximum, minimum and average measured values monitored by the wireless sensor system

ABB Ability System 800xA 6.1 introduces Ethernet I/O solutions, additional High Integrity controllers and a series of engineering tools such as a Ethernet I/O Field Kit, an Ethernet I/O Wizard for field commissioning and the possibility to engineer with signals in the Control Builder.

These multi-channel gradient valves are useful for solvent selection, stream splitting, flushing and other automated applications.

IP65 Motors are available in single-shaft configurations and have a 1-ft. cable and locking connector. Extension cables with mating IP65 connector are available in 6, 10 and 20 ft lengths.

The X-LSM-SV is designed with vacuum compatible materials to minimize outgassing and allow for faster pump down times. Zaber devices allow daisy-chaining in a vacuum chamber, decreasing cables and clutter.

SKF Pulse has a visual interface that guides users through the data collection process. Users enter asset information that automatically configures alarm thresholds based on ISO standards.

The Penetration Testing Assessment discovers vulnerabilities to assess the security of an organization’s IT environment. The Industrial Cybersecurity Assessment provides evaluation of vulnerabilities in industrial control system (ICS) environments, taking into account the operational technology (OT) requirements of utility, manufacturing, oil and gas, and critical infrastructure operators.

When mounted on a compatible single board computer or other XMC carrier, the Model 71810 provides a customizable I/O signal status and control interface.

Schneider Electric is pleased to announce the launch of the multi-tiered pressure transmitters line, to allow customers to optimize their investments without compromise of quality and capitalize on investments.

ABB Ability Wellhead Manager is cloud-based, so operators can gain insights about their production assets anywhere in the world. Remote workers can connect in real-time.

The gantry is driven by linear motors and each axis is equipped with preloaded linear bearings. Applications include 3D printers, assembly, pick-and-place, alignment, inspection, and other industrial automation applications.

The power inverters are available for input DC voltages 12V/24V/48V, and output AC voltages 110 V /120 V /220 V /230 V /240V for selection.

The DC VSDs are built on ABB’s all-compatible, common drive platform, sharing the same control panel, features and tools as recent- and future-generation ABB drives. Once users have learned one ABB all-compatible drive, they can use other all-compatible drives – both DC and AC.

FCl’s AST thermal mass flow technology for the ST80 Flow Meters features a hybrid sensor drive. This measuring technique combines both constant power (CP) and constant temperature (CT) thermal dispersion sensing technologies in the same instrument.

The combination of single-cable connectivity and POSITAL’s kit encoders provides motor manufacturers, machine builders and system integrators a way of building absolute position feedback into devices such as servo-motors, stepper motors and robotic joints.

PC-DMIS 2019 R1 introduces the GD&T Selection and Capture tool which automatically transfers GD&T data from 2D ‘blueprints’ into the PC-DMIS measurement routine.

When the panel-mount connector is mounted it can withstand wash-downs and splashes when a cable is not connected, making the NCC connector suitable for medical and industrial applications where spillages and cleanings are a regular part of the environment.

The result is a microenvironment that adapts to each individual’s needs and is achieved through the measurement and grading of factors such as air quality, temperature, lighting environment and humidity.

These basic controllers are IP66 rated for dust and water jet ingress protection (inside suitable enclosure) and have a 0°C to 50°C operating temperature range.

RIGOL’s EMI Measurement Application provides an EMI Pre-Compliance Solution allowing engineers to measure, compare, analyze, and report on EMI issues throughout their design process.

Through the use of wireless “data eyeglasses” and Pick-by-Voice, a Hänel Lean-Lift Vertical Lift Module (VLM) can be operated hands-free, without the use of a system controller or keyboard.

TrendMiner enables process and asset experts to analyze, monitor and predict operational performance through trend analysis of time-series data. The new 'Stacked Trend View' enables the display of trend data within separate lanes, vertically stacked and aligned.

TF1 Series consists of an inductively coupled position marker attached to a moving rod/piece of the user’s application that requires a position measurement and the sensor with operational and programming status LEDs.

These 15 / 20 / 30 watt 5V out models with “-A1” suffix feature an extended trim range up to 6VDC. This makes these converters suitable for providing isolation and regulation for circuits in low-noise applications.

The FWM7BLZ20B series is powered by Nordic Semiconductor's nRF52832 SoC. The symbol rate and data rate accommodates both 1Mbps and improved 2Mbps to facilitate communication speed with other Bluetooth devices.

IBM Maximo Asset Performance Management (APM) solutions collect data from physical assets in near real-time and provide insights on current operating conditions, predict potential issues, identify problems and offer repair recommendations.

The AS7026 provides continuous heart rate, heart rate variability, blood pressure, and electrocardiography (ECG) measurements when embedded in a consumer device such as a fitness-monitoring wristband or smart watch.

The USB7002 combines USB 3.1 technology with the USB Type-C. The USB7002 enables direct USB Type-C connections through native Configuration Channel (CC) pin interfaces and integrated 2:1 multiplexers that support the reversible connection feature of the USB Type-C connector.

ELOfleet is OEM-independent and can be installed on any type of industrial truck. But it also provides an alternative for managing single-brand fleets. Customers can customize their own branded versions of ELOfleet, with their own individualized safety messages.

AIStorm processes sensor data directly in its native analog form—in real time—by using charge-domain processing instead of GPU/digital processing.

This modular embedded system is certified with CE, FCC, EN 50155, EN 50121-3-2, and EN 45545-2, and is in compliance with E-Mark, ISO 7637-2, IEC 60945 and DNV 2.4 to ensure the operation.

These gauges feature an industrial grade black die-cast aluminum case with two high pressure and two low pressure connection ports (1/8" female NPT), and a 4-inch (100 mm) white aluminum dial with black pressure markings.

The 9404 features four 5 GHz 12-bit channels, each supported by real-time sampling to 500 MS/s per channel and up to 1 TS/s (1 ps) equivalent-time sampling.

The plug-in module PCAN-MicroMod FD, the development board PCAN-MicroMod FD Evaluation Board, and the PCAN-MicroMod FD motherboards Analog 1, Digital 1, and Digital 2 will be available

Based on IEEE 802.15.4, the SAM R30 module supports proprietary networks that can be customized and configured. This is suitable for applications where interoperability is not desired due to their inherent vulnerability to remote attacks, such as alarm systems, building automation, smart cities and industrial sensor networks.

The rotor of servo motor is made smaller in diameter and longer in length, so that it has low inertia. ATO AC servo motors are available in power ratings from fraction of watt up to few 100 watts

Selected as a Microsoft mixed reality partner representing the architecture, engineering, and construction (AEC) industry, Bentley demonstrated how with SYNCHRO XR for HoloLens 2, users can interact collaboratively with digital construction models using gestures to plan, visualize, and experience construction sequencing.

An upgraded microwave module has made the Rosemount 3308 more tolerant to difficult process conditions and therefore able to deliver a more sensitive and repeatable measurement with accuracy

The TankScan TSU1000 automated tank measurement system optimizes the distribution and collection processes while decreasing the need for manual inspections at remote tank sites.

Measuring 20 mm in thickness, the DSP300-318 is specially designed for digital menu boards, self-ordering systems, retail applications, queuing systems, interactive kiosks, video walls, and more.

Sinamics G120X has a power range of 1–700 hp (0.75–630 kW) and can operate in a temperature range from -4 to +140° F (-20 to +60° C) with any standard motor, including synchronous reluctance motors (SRM). It has an integral DC choke for harmonics and EMC performance.

The capaNCDT 61x0/IP capacitive measuring system is specially designed for industrial measurement tasks where precision is required. It detects parameters such as displacement, distance, deflection, expansion, and deformation of conductive targets.

The SD4840E2 integrated controller + drive communicates with the host PLC over the EtherNet/IP, Modbus-TCP, or Profinet network, and move commands are programmed through the host PLC’s software.

Designed to operate at extended temperatures ranging from -40°C to +85°C, the IBQ800 is suitable for use in industrial environments and vertical market segments including automation, gaming, ATM, transportation, power utility and digital signage.

The Type 7000 is designed to provide regulation accuracy and repeatability during variable high flow conditions. The large port size options and construction make it suitable to be used in arange of pneumatic control systems.

The NewTek M-375 Series transducers are available in ranges from ± 0.025 inch (± 0.63 mm) to ± 1.0 inch (±25 mm) and operate at a linearity of ±0.15% of Full Range Typical (0.25% max).

Embedded with the Qualcomm/Atheros AR9331 chipset, it boasts network robustness, stability, and network coverage with a low voltage input. Based on IEEE 802.11 b/g/n, the access point supports high-speed data transmission of up to 150MBps.

These 3.25” input to output shaft distance gearboxes areavailable in ratios of 10:1, 15:1, 20:1, 30:1, 40:1, & 60:1 with outputs in left hand shaft, right hand shaft, dual shaft, and hollow shaft.

This MEL technology is a configurable distribution that provides an operating system platform for embedded systems development and is a result of the continued integration of the recently acquired embedded systems design capabilities from Mentor Graphics.

The CM1284 boundless switch enables users to manage data more efficiently by allowing multiple video sources to be selected, switched and displayed simultaneously with independent keyboard and mouse control.

Integrated into new and existing applications the motor features a 10-32 UNC-2B threaded mounting hole in the center of the housing and two 6-32-UNC-2B threaded mounting holes on the coil end.

The t-Sort system is a robotic material handling system and has applications for both unit and parcel sortation. This automated sortation system consists of autonomous robots.

The 2 MP Ultra low light HDR USB UVC camera has a built-in H.264/MJPEG compression based on SONY STARVIS series 1/2.8” IMX290 CMOS image sensor

Contrinex DW series 4mm, 5mm, 8mm and 12mm diameter round body inductive proximity sensors have been added.

The AOIs work to reduce communications overhead by decreasing the work of integrating Lexium MDrive motor and electronics products into new and existing PLC programs.

The AI-enabled robotics system can be scaled to meet evolving business needs to handle large peaks, and reduced during non-peak hours. Flexo components are designed to allow for implementation in as short as 15 days due to its simple design, modularity and standardisation.

The HP-L-5.8 is compatible with Hexagon CMMs that use PC-DMIS 2018 R2 and subsequent versions of the software and works with an automatic indexing probe head or continuous wrist.

The MDX on-board controllers utilize the same command interfaces as external motor controllers including CANopen, RS-485, Modbus, and Ethernet connections as well as discrete I/O interfaces like pulse & direction.

The AY110-100V Vertical Rotation Stage is suitable for: Metrology, positioning of mirrors and lasers, laser machining or scribing, micro robotics, scanning, electronic assembly, testing, photonics, and vision systems.

The ability to automatically adapt the user interface to meet the needs of different types of users across multiple departments can result in higher adoption rates, leading to a computer-aided technology (CAx) system and the creation of a digital twin.

The push-in connection system allows for safe connection of wires without tools. When a solid wire or ferrule is inserted, the pressure spring opens automatically and establishes a secure contact.

Thin sensors with Peratech’s QTC technology are mechanically integrated in key areas of the smartphone to capture a user’s single-handed grip, ergonomic finger movements, presses and squeezes to control key functions.

OneEdge works to solve challenges related to integration, scalability, and management that solution architects and their enterprise customers face as they implement IoT to transform their businesses. The offering is designed to accelerate solutions to market.

The module is available with green (520 nm) and red (635 nm) dot, cross-hair, and line lasers. The focus can either be set to a fixed distance or to infinity.

The VT3250ES features a purge protected 1080P 32” display system. This system is capable of monitoring large amounts of process control data or critical imagery and information within a hazardous area environment.

This solution can help manufacturers reduce the risk of bad parts or equipment damage by detecting issues early on and prompting immediate action to resolve them.

The PCAN-MiniDiag FD can be operated with one hand due to its size and fits into any conventional trouser or jacket pocket. The device is suitable for service technicians and developers who want to access unknown CAN networks in vehicles, machines, or industrial facilities and perform simple diagnostics.

The miniature thrust bearings found in these bearing series are typically manufactured in SAE 52100 chrome steel, and are available in bore sizes as small as 2 mm and as large as 18 mm and race ODs as small as 6 mm and as large as 20 mm

Webalo 5.0 has specific features designed to support frontline workers in energy, manufacturing, mining, transportation and other industrial segments.

The cifX PC cards are a unified standard supporting all Real-Time Ethernet and Fieldbus systems, like CC-Link, CC-Link IE Field and CC-Link IE Field Basic.

The E2.1 series offers filling of the e-chain from the side or top, along the inner or outer radius, with a chain opener or screwdriver. In this process, one meter of the e-chain can be opened in two seconds.

This box module includes an Intel Atom CPU, and can be mounted to any Pro-face PS5000 series display for multiple iPC applications. The PS5001B Atom Box unit offers M.2 and eMMC storage.

They are also a choice for other applications that require accuracy, reliability, and structural integrity, including nuclear reactors, steam and gas turbines, chemical processes, and high temperature processing.

The Continua platform is designed to have the power to turn any process, system, software bot, or real robot into a self-learning autonomous service to drive actionable business outcomes.

When connected to an application System on Chip (SoC) or processor as host, the LAN7430/1 allows the host device to deliver audio, data or video data through the 10/100/1000 Ethernet network.

cMT-SVR-200 has inherited all the key characteristics, including multi-display and remote monitoring. By running cMT Viewer App on a tablet, mobile phone, or PC, the operators can wirelessly monitor and control multiple cMT HMIs.

The cabinet is designed to shield desktop laser printers (such as Brother, Canon, HP, and Ricoh) and thermal transfer label printers (such as Zebra, Cognitive, Honeywell, and Intermec), on dusty, dirty, and wet factory floors

Averna’s Jupiter 310 Design Verification System is the industry standard for automated DOCSIS3.1 physical (PHY) layer pre-certification testing. It provides the test coverage for DOCSIS 3.1 devices.

The MCx1101 are fully integrated, bi-directional current sensors that offer DC accuracy and dynamic range. For example, the ±20A version has a typical accuracy of ±0.6% and are guaranteed to achieve an accuracy of ±2.0% (max) at 85°C.

The EE8915 from E+E Elektronik meets railway standards for CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab.

An array of holes on the Model 1004SS M4 Back Blow Air Nozzle provides a back-facing 360-degree airflow to clear out coolant, chips and light oils from machining processes.

The AGV-SPO is available with a selection of optical coatings and focusing optics to support a variety of commonly-used laser wavelengths and focal lengths. Customized optics and optical mounting features are available upon request.

The PSAW65I Series packs 65W into a case measuring 4.62” x 1.98” x 1.4” with a 4-foot-long dc output cable, terminating in a 2.1mm barrel connector.

The TM-RG2M / TM- RU2M Low-Profile Direct Drive Motor is coupled directly to a load. It is designed for use in industries such as semiconductor / LCD manufacturing, machine tool, material handling and inspection.

The product line includes mechanical, orifice, thermostatic, thermodynamic, and clean steam designs. A global network of technically trained Nicholson applications experts can help with steam trap sizing and selection.

TRENDnet’s 8-Port Industrial EN50155 M12 Gigabit PoE+ Railway Switch (TI-TPG80) is specifically designed for use with moving buses, railways, and other rolling stock applications.

The SPECTROGREEN analyzer is designed for routine analyses in environmental and agronomy applications as well as consumer product safety, pharmaceuticals, petrochemicals, chemicals, and foods.

The 940 series were designed to compensate for ambient temperature allowing for field calibrations in virtually any environment.

ABB Ability e-mesh solution is a cloud-based offering that is designed to enable utilities, industries, independent power producers and operators to make business decisions by monitoring and controlling their sites and fleets remotely.

Configured for users of TSMC, Global Foundries, UMC, SMIC, and in-house technologies of Tier 1 design companies, the AMALIA schematic porting capability is used in analog migration projects.

The Merkur ZLS has a FPGA and an IP Core to program the FPGA. The Dual Core ARM processor can also be extended with the Myriad 2 Deep Learning processor.

A key part of the Ignition 8 release is the Ignition Perspective Module, a pure-web, fully mobile solution. It provides full SCADA control from mobile phones, and drag-and-drop capabilities for designing mobile-responsive screens that are ideal for mobile devices.

The GateToGo is a mobile data entry portal (gate) that can be used to run proof of concepts for logistics applications without programming effort

Due to its hygienic design, the EXspect 271 sensor is suitable for applications in the food and drinks industries, but also for diverse applications in the processing industry.

The upcoming software release adds functionality including a Maintenance module to the LR AllAssets Asset Performance Management (APM) platform, which includes FMEA, FMECA, RCM and Maintenance Optimization capabilities and libraries.

Through lens sighting and laser targeting light, 1-color or 2-color operation, manually focused optics, switchable serial interface, two display formats, several operating modes – all can be selected quickly and directly on the 2.6 pound device.

All IEC 61131-3 standard languages are supported by groov EPIC, including Function Block Diagram (FBD), Structured Text (ST), Sequential Function Charts (SFC), and Ladder Diagram (LD).

The offerings are designed to extend intrinsic security to legacy automation, support secure MQTT messaging, and enable Role Based Access Control (RBAC) across the Bedrock OSA platform

The motion controller can be controlled via CANopen and Modbus RTU or programmed for stand-alone operation and be controlled via digital and analog inputs.