Industry Products

ztC Edge is a zero-touch, fully virtualized and self-protecting computing platform, specifically designed for industrial edge environments.

The cable’s special structure includes integrated strain relief elements which allow the cable to support its own weight in high-tensile or hanging applications.

Based on an IoT platform architecture, KNet IIoT extracts a large amount of data from assets based on OPC Unified Architecture standards integrating multiple wide-spread systems into a cohesive whole.

The TRN 1 series feature 2:1 input ranges, a full load -40 to +90°C operating temperature range and are available in an SIP or SMD package (suffix SM).

The IFB125 is suitable for a variety of applications including applications that require remote control and monitoring management functions, i.e., unmanned control, industrial automation, automatic parking lot control, traffic light control and more.

Three-phase AC voltage systems up to 690 V can be analyzed simultaneously on six channels and with 20 ksamples/s directly in the PLC. For each of the three phases, the EL3783 EtherCAT Terminal from Beckhoff samples voltages up to 400/690 Vrms and currents up to one or five Arms as instantaneous values with 16-bit resolution.

Recommended when there is a need for repeat connection and disconnection of test fixture cables, it is designed to allow users to minimize bent pins and wear of the headers on the main unit, expansion modules, and free-standing QuickMount housings.

Pervasive Sensing uses the power of sensing technologies to provide continuous, real-time data that power Plantweb Insight applications to support customers’ operational programs in key performance areas such as safety, production, and energy and emissions management.

Korenix JetCon 2301S is a single port 10/100 TX to 100 FX media converter. It fulfills latency requirements with invariant forwarding latency from 64 to 1600 bytes. The Auto Link Loss Forwarding technology allows fault detection in a short time.

The XV100 basic human machine interface (HMI) is designed to provide machine visualization and control, the XV300 HMI offers next generation performance and functions, and the XP500 industrial PC can operate as a supervisory control and data acquisition (SCADA) solution.

Honeywell designed the Asset Performance Insight solution to be deployed to customers through pre-configured templates. These templates are based on the company’s industry experience and real-world customer challenges enhanced with advanced analytics.

NDT integrates real and simulated cyber-attacks, wired and wireless virtual networks, live and virtual equipment and applications, and traditional kinetic warfare training simulators into a full, instrumented, synthetic cyber warfare training environment.

Units are recognized to Standard UL-1004-6 for Servo and Stepper Motors, UL 1004-1 Standard for Rotating Electrical Machines, and Canadian CSA Standard C22.2 No. 100-14 for Motors and Generators.

The CMM platform features four capability packages focused on customer productivity drivers: Throughput, Precision, Multi-Purpose and Shop-Floor.

The SC-350 is ideal for applications that require precise edge definition and uniform passes for 100% solids as well as solvent-based materials. An airflow extension optimizes atomization of high-viscosity materials, such as silicones, acrylics, and urethanes, and reduces the "cobwebbing effect"

These customized unloading systems can include bulk bag discharging, material weighing and batch dispensing, along with the controls required for automatic operation.

The FWM8BLZ02A-109069 beacon monitors temperature, inclination, vibration, and motion data and records it to non-volatile memory inside the beacon. It is capable of storing up to 68 hours of data at 60 second intervals, or 42 days of data at 15-minute intervals, with a maximum storage capacity of 32Kbytes.

The OPC. NET Client Toolkit enables programming of OPC client software using .NET and without dealing with OPC and COM complexities. The resulted applications provide real-time data, historical data, alarms and events access.

The sensors feature 4 to 20 mA or RS-485 Modbus outputs, depending on the model selected. Up to 247 sensors may be installed on each Modbus network. The PSC-SSS-PM Series sensors are designed to simplify set up for alarm relays and adjustments.

SureMotion hardened rotary shafts are precision ground for a surface finish of 10RMS. Models are available in diameters up to 3/4 inch and precut lengths up to 36 inches.

The upgrade features connectivity to Ignition by Inductive Automation, an industrial application platform for SCADA and IIoT solutions, via the industry-standard Sparkplug MQTT profile, as well as enhancements to RAMQTT, Red Lion’s MQTT client.

Designed for the observation and inspection of metal components, the Olympus GX53 inverted metallurgical microscope features an LED light source. The GX53 microscope also incorporates the latest version of OLYMPUS Stream image analysis software (v. 2.3) for observation and reporting capabilities.

The MLC 530 SPG (“Smart Process Gating”) light curtains, use a control signal provided by the PLC and the interruption of the protective field itself for bridging to the material transport.

Most current Pro-face HMIs and iPCs are Pro-face Connect ready allowing users to access to their machines remotely to program, troubleshoot, and maintain the unit’s performance.

The U1-050 UCC complies in many directions to overcome misalignment between the tool and the workpiece. The patented mechanism is designed for demanding high-endurance applications and offers simultaneous X-Y lateral compliance, X-Y-Z axis rotation, and Z compression.

The custom CMOS imager features six separate lines of 7.5-micron pixels with two lines each of red, green, and blue pixels. This arrangement makes it possible for the SW-4000TL-PMCL to provide horizontal binning, vertical binning, or both

The MesoSPHERE Plasma System is designed for processing of 3D and wafer-level packaging processes such as fan-in, fan-out, wafer-level, and panel-level -handling wafers up to 450mm and panels up to 480mm. The MesoSPHERE's W3 three-axis symmetrical plasma chamber ensures that all areas of the wafer are treated equally and uniformly.

The FT4X was designed to be used in Oil & Gas and Industrial applications. It is suitable for applications monitoring pure gases, mixed gases, and even complex flare gas compositions.

In addition to its pair of fiber/copper SFP GbE ports are four conventional GbE ports and two Mini-card slots to accommodate WiFi and 4G LTE expansion. The system’s inbuilt bypass function also ensures that network traffic will continue to flow in the event of software complications or loss of power.

In addition to the redundancy Ethernet networking features the device is equipped with redundant power supply inputs. The RSG907R and RSG909R come with a set of approvals enabling digitalization in Electric Power, Transportation and Oil & Gas markets.

Single-phase MTR2 rolled-steel motors are available in 1800 RPM, 115/230 VAC models. The motors are 56C frame, TEFC, and provide rigid base or C-face mounting. Nameplates include 60 & 50Hz specifications and reverse wiring instructions.

The GOT815L-511 has a 15-inch XGA TFT flat bezel LCD display with 420 nits of brightness. The GOT817L-511 has a 17-inch SXGA TFT flat bezel LCD display with 350 nits of brightness. These touch panel PCs are designed for use in humid or dusty environments.

Each frame size offers a range of interrupting voltage ratings from 240-690 Vac and 250-600 Vdc and are compliant with global standards that include UL 489, CSA C22.2 No 5.1, IEC 60947- 2.

The Area Profile Scanner 3D offers a combination of stereometry, triangulation and different types of illumination according to the specific application: a random pattern illumination of a multi-line illumination

Each TCW210-TH can monitor up to 8 temperature and/or temperature-humidity sensors of various brands and types (up to 24 different parameters each) via either 1-Wire interface and/or the more robust MODBUS RTU over RS485.

Heartbeat Diagnostics’ continuous analysis of transmitter/sensor system health status during operation enables recognition of related events when they occur.

ACRView is a code-development tool that assists users of ACR controller and IPA drive products to program, debug, and commission their application. Several features are incorporated to assist both the novice and expert users in developing code.

These sensors feature impact-resistant Type 316L stainless-steel or aluminum housings with seals rated to IP67. They are designed for marine vessels, off-shore facilities, mines, cranes, wind turbines and other challenging locations.

Developed for deployment at the heart of the pipeline operations management environment, the EPMS supplements a core SCADA platform with specific gas and liquid applications that enable a pipeline operator to manage delivery contracts and associated logistics.

Housing of the RFX 6900 Series is anodized aluminum and sealed to IP 67 or IP 69K—depending on version. Conforms to ISO 13849 for safety related applications.

The model NCC08-75-3000-3X is capable of generating a continuous force of 300 pounds [1330 N] and a peak force of 900 pounds [4000 N] at a duty cycle of 10% (i.e. 1 second on, and 9 seconds off).

The e-CAM21_CUTX2 camera is a camera for smart applications powered by Machine Learning and Deep Learning technologies on the powerful Tegra X2 platforms including smart surveillance, smart parking and other innovative applications requiring cameras with excellent image quality

R-TecLiner’s spring return mechanism is designed to guide the energy package with minimal wear. The completely enclosed system comes in aluminum housing to protect against hazards and dust ingress.

The industrial PC is made for automatic optical inspection, digital signage, motion control, factory automation, and many more Industrial IoT applications.

In andon, manufacturers can collect production results (pass/fail) and station status (red/yellow/green) in real time for each station on the manufacturing floor. This data can be collected through andon’s web app or through their public API for integration with a company’s existing automation.

The SC2818 motors are available in three lengths, each with one or two shafts. The version with the B-shaft is optionally offered with an NOE1 encoder with up to 2000 increments/revolution.

The Tolomatic ServoChoke SVC electric choke valve actuator is designed to meet requirements for a more flexible high-speed actuator in performance drilling applications such as managed pressure drilling (MPD), set-point control or choke-and-kill.

Powered by Intel Apollo Lake processing, the ML350 is a customizable computing platform, purpose-built from board to chassis for applications ranging from digital signage and machine automation, to industrial IoT and edge computing.

The LEC-2137, measured at 198mm x 57mm x 143.8mm (W x H x D), is a thin client gateway that can be configured with either a total of 6 Ethernet ports or 2 Ethernet ports and 4 PoE ports.

POSITAL’s motor feedback kits, which feature 17-bit electronic resolution, are designed to bridge the gap between simple resolvers and more complex and expensive optical encoders for servomotors, robot joints and other applications where absolute rotary position feedback is required.

The V5 MES and V5 ANDON software now features two (2) separate real-time reporting apps, i.e. a business and manufacturing intelligence dashboard for over-all plant performance monitoring and reporting for plant or engineering managers; and a corresponding plant floor or work station level dashboard screen for assembly line workers and area supervisors to track their progress.

The DX 8600 Series Data Link has been specifically designed for data & power transmission from any rotating shaft to a static location. The Data Link utilises an inductive coupling to provide power to the rotary transmitter, which then sends serial data back to the stator module.

The shielded ER SMT series – Gowanda ER5025S – complements MIL-PRF-39010 Qualified Product List (QPL) axial-leaded (thru-hole) products and enables their conversion to SMT circuitry via this MIL-PRF-39010 qualified SMT series.

The comprehensive solution suite is designed to enable electric power utilities to optimize asset utilization and reduce equipment failures and system outages.

The SmartPAC PRO architecture supports advanced connectivity features such as remote access from PCs and mobile devices, email messaging, and compatibility with Wintriss’s IIoT production tracking solution ShopFloorConnect

The HeavyMate range consists of hoods, housings, inserts and various contact types designed for external applications where EMC protection is important; where a high number of contacts may be required or a range of signals are being transmitted; and where there is a need for a lockable system.

This version of LabVIEW NXG introduces key functionality, particularly for engineers developing, deploying and managing automated test and measurement systems.

This multiplexer is an ethernet controlled version of the USB controlled multiplexer - IA-3133-U2i. The new ethernet controlled version functionality is compatible with the original USB controlled version, with an additional ability to handle 64x1 channels.

The FHA-C Mini Servo Actuator with multi-turn absolute encoder (MZE), is designed to provide performance for machinery, automation systems and industrial robots in environments prone to electromagnetic interference (EMI).

STEUTE's Series ZS 71 emergency pull wire switch is equipped with snap-action, NC positive-break contacts, providing a means for initiating an emergency stop along the length of the installed pull-wire.

The JR-2000 includes an LED-based status indicator allowing users to quickly see whether the logger is actually logging, is set for a delayed start, is full, or is in an alarm state.

The Ruggedcom RST2228 is a Layer 2 rack switch with 4 integrated 1/10 Gbit/s uplinks and up to 24 field modular 10/100/1000 Mbit/s interfaces supporting IEEE 1588 Transparent Clock.

Available in size ranges from 70 Watt to 100 Watt, these EC (electronically commutated) frameless slotted motors feature voltage windings, high pole pair count and are shipped as BLDC frameless motor kits.

The modules, when used with ABB’s AC500/AC500-S programmable logic controller (PLC), feature the ability to exchange process and safety data, not only from one controller to multiple devices but also from one device to multiple controllers, using PROFINET/PROFIsafeshared device functionality.

The binder Series 696 HEC connectors are manufactured from a tough UL 94V-0 rated polyamide and incorporate a three-point bayonet locking system that makes for secure fastening.

The release of NUMROTO software provides numerous features and enhancements. These include features for ball nose and corner radius tools, automated documentation of fully dimensioned wheel packages, and grinding spindle power monitoring to facilitate adaptive grinding on specific machines.

The transformers comply with the latest NEC requirements for harsh and hazardous industrial locations, making them ideal for service in petrochemical facilities, wastewater treatment centers, and power generation plants.

The AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in).

The terminals are available in 7-inch, 9-inch and 12-inch display sizes. A 6-inch display option will be available in 2018. The terminals are specifically designed for applications of up to 50 HMI screens

igus Chainflex cables are available with 3 to 25 unshielded (CF5 series) or 4 to 12 shielded (CF6 series) conductors in 20 AWG to 14 AWG sizes. Chainflex cable is sold in 20, 50, 100, 250 and 500 ft. lengths.

With a touchscreen and LCD, this HDMI-enabled unit can work with screens of any size. It can also allow touch control via USB connection.

The RELY-TSN-PCIe smart pluggable board combines in a single device PCIe TSN Endpoint and TSN Bridge functionalities, and provides 3 external fiber or copper tri-speed Ethernet ports.

The Kinitics KLA05 Linear Actuator provides forces up to 650 N (146 lbf) and strokes up to 6.7 mm (0.264"), can be configured to supply a pushing or pulling force, and fits in a variety of applications

The AS7265x chipset consists of 3 6-channel sensor devices, each 4.5 x 4.4 x 2.5mm, in land-grid array packages with integrated apertures. The master-slave-slave architecture appears as a single logical device.

They are single axis ICP voltage output with measurement ranges of +/- 5,000 g (model 352A91) and +/- 20,000 g (model 352A92).

Scalability features in R19 include parallelization of complex calculations across CPUs within a single server, administration tools for performance optimization, and increased control and visibility by users into their efforts with real time progress indicators.

This Wireless Analog Transmitter/Receiver System allows for remotely monitoring sensors or controlling process equipment from a distance up to 1 mile (LOS) line-of-site away using license free wireless 2.4GHz 802.15.4 communication.

This power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more.

The female panel mount connector provides IP54 protection from intrusion of liquids, water splash and touching of the contacts. Mechanical resistance is greater than 5,000 mating cycles.

In addition to its Core processor, the NANOCOM-KBU boasts an upgraded embedded controller structure with a real-time interrupt for faster response rates, and it addresses a customer demand for power control and battery management systems.

The Roller Non-Contact Accumulation (RNCA) Decline allows systems to accumulate and decline items on a single conveyor.

PAS Cyber Integrity 6.0 now includes continuous vulnerability management providing visibility into vulnerability risk within industrial process control networks

All IntelliPICK3D sensors are pre-calibrated, come with an additional automated calibration of both sensor and robot as well as a menu designed to shortenset up times to just a few hours.

The Ergo-Matic line features lift capability up to 36” to double-stack drums, spark-resistant components for flammable areas, double “Parrot-Beak” clamps for fiber and plastic drums plus special wheels and coatings for FDA Approved applications.

The Series 9200 is specifically engineered to meet the requirements of the oil and gas industry’s exploratory well-logging process. It is designed to allow well loggers monitoring a drill site to analyze the hydrocarbons within a well both quantitatively and qualitatively, while drilling.

First available in 2014, the SDN 40-24-100C has been redesigned by doubling its 2 terminals to 4 terminals to enable plant managers to connect more than one load to the power supply.

The A-82x controller family integrates closed-loop digital servo control, drivers, and power supply in one rack mount design. Depending on the number of axes, total output power of 1100W to 2000W with peak power to 3900W is provided.

The latest version, ABB Ability Knowledge Manager 9.0, incorporates digital capabilities and technology to provide mining and cement industry customers with the ability to view, analyze, and act upon critical process data from any mobile device.

As a free-standing, quick-release board fixture, it allows users to connect CAMI’s test interface boards to the 64-pin headers of any expansion module - even at some distance. The housing may be used with any CableEye model and is rated to 2100 V dc / 1500 Vac.

Developed for imaging applications that don’t require the higher speed of On Semi’s P1 sensors, the latest P3-based cameras are available in color and monochrome.

Integrating CyberX’s purpose-built OT security platform with IBM QRadar is designed to enable organizations to respond more quickly, allowing CISOs to strengthen OT security while building upon the investments they’ve already made in people, workflows, and technology for the corporate SOC.

The MAQ20-DORLY20 module offers 20 isolated SPST latching relay output channels that can switch between 2A at 30V and 0.4A at 150V. Each channel has contact state readback to verify the physical output state.

Mencom’s Inside-Outlet (GFDP1) Power Port features three GFCI-protected receptacles; two outside and one inside the panel to provide a solution to comply with NFPA 79, The Control Panel Utility Receptacle Standard.

Combined with a USB3 Vision interface for plug and play compatibility, the AP-3200T-USB camera can output as much as 3 x 3.2 megapixels at 38.3 frames/second. The USB3 Vision interface allows for a data throughput of 350 MB/s.

Built to run on any devices, Shopfloor-Online 7.0 supports the mobility of workers in the manufacturing environment whilst delivering real-time factory information to managers and executives.

The THM 20WI series are designed as a solution not only for medical equipment but also for ITE applications such as transportation, control & measurement or IGBT drivers.

The Matrix-713 is a fanless Linux-ready Cortex-A5 Industrial Box Computer suitable for mobile computing, integration and control needs in vehicles and smart factories.

Uniformance Cloud Historian’s design fuses the real-time process data analysis of a traditional enterprise historian with a data lake, enabling the integration of production, Enterprise Resource Planning (ERP), and other business data coupled with analytics tools to provide business intelligence.

Standard configurations of Applied Motion's TSM11 (NEMA 11 frame) integrated motors incorporate a single 12-pin header that provides the power supply, input, output, and RS-485 communication terminals in an integrated space without sacrificing input and output connectivity to other devices, controllers, or HMIs on the machine.

Designed to train operators in the distillation process, the NAPCON Games Distiller can be used in practically any branch of the process industry that includes distillation.