Industry Products

The eMMC 5.1 NANDrive products are HS200/HS400 compliant and support command queuing for data throughput and multitasking. These also offer features, such as advanced wear-leveling, bad block management and error correction code (ECC) capabilities to extend the life of the product.

Available in size ranges from 30 Watt to 70 Watt, these EC (electronically commutated) frameless slotted motors feature low voltage windings, high pole pair count and are shipped as BLDC frameless motor kits.

EyeVision has been enhanced to support the Intel Real Sense D-400. The 3D command set of the EyeVision 3D software allows users to capture 3D images and process point clouds with the Intel sensor.

The LDX-B20 is a microprocessor-controlled buffer unit rated at 20A and usable in 12, 24, 48 and 72 V systems. It monitors output voltage from a DC power supply and, in the case of failure, keeps the output regulated for at least 300 ms at full load.

Working with Microsoft Azure, the Eplan software is equipped to offer secure, worldwide data access, and the provisioning of IT infrastructure

Available on all Makino EDMs equipped with Hyper-i control systems, HyperConnect is intended to enable shop managers and operators to monitor and control EDM processes from any PC, smart device or other Hyper-i control systems on the network.

The Field Xpert SMT70 supports HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus, CDI and Endress+Hauser service interfaces. It can connect to field instrumentation devices directly via a USB or Bluetooth wireless modem, or via a gateway, remote I/O or multiplexer to a bus system .

These sensors operate on 20-250 VAC/VDC input voltage with N.O. and N.C. output options available. The sensors are short-circuit protected and have a yellow LED status indicator that is output energized.

Version 7.0 of the suite delivers enhancements, including administration features, improved developer and engineer usability and enhanced reporting capabilities.

The sensor head with a maximum detection range of up to 850 mm in length can be trimmed to length (minimum 108 mm) and attached to container walls without additional accessories using the integrated adhesive surface

The Woodhead Super-Safeway Power Boxes feature a vulcanized rubber enclosure that is resistant to shock, impact and corrosion. The boxes are 29 pounds and the aluminum legs give it a 6-inch ground clearance.

Designed for industries such as automotive, consumer, and industrial automation, the Micro-Lock Plus Connector System is suitable for a variety of applications, including vehicle switches, robotics, drones, home appliances, and power tools.

Alongside the new SCARA model, Toshiba Machine demonstrated its robot programming tool, 3D vision software and models from its 6-axis range.

Designed for process and plant engineers challenged with measuring wet dirty mixed gases in solid waste operations with co-generation electric power systems, the enhanced ST51 Series Thermal Mass Flow Meter from Fluid Components International (FCI) is designed to provide continuously accurate measurement of landfill gas flow to the co-gen electric power engines.

The ET975 is designed for applications found in factory automation, kiosk, communications, medical imaging and digital signage environments.

AAEON has fitted its new device with an inbuilt Trusted Platform Module (TPM). This gives the PICO-APL3 has a hardware solution that encrypts information and protect against viruses.

The 37-pound BFX1-24 is designed for deployable transit case integration where both image quality and display toughness are required. Both displays in the BFX are offered with bonded cover glass with anti-reflection and EMI surface treatments for MIL-STD-461G certification.

Qt 3D Studio provides a 3D user interface (UI) authoring system that caters to the technology requirements of both software developers and graphic designers.

Sciemetric Instruments has released the Leak Tuner Assistant, to help users take full advantage of the speed, accuracy and intelligence of Sciemetric’s 3520 Series Leak Tester.

The Lock 500 is designed for demanding industrial environments and opens new opportunities in security and office networking sectors.

The integrated Leidos and Nozomi Networks’ solution adds ICS intrusion detection and passive asset discovery and monitoring to Leidos’ Industrial Defender ASM. This strengthens the ASM’s ability to identify operational technology network assets and adds cutting-edge detection capabilities.

These servo-amplifiers are built into a fully enclosed aluminum case. Mode of operation is set by simple DIP switches. These drives handle a range of power supply voltages (from 11 to 70VDC) for a variety of power input requirements.

The KinetiMax has an integrated speed control loop with speed set input to adjust motor speed from 150 to 5000 RPM. It has a minimum operating life of 20,000 hours.

The RadEAGLET uses a multi-agent system-based algorithm that provides superior speed and accuracy for radioisotope detection and identification. This algorithm is intended to reduce the false ID’s and false alarms exhibited by older generation systems.

The QRW is housed in an industry standard ¼ brick package and features an input range of 9 to 18VDC, designed for applications powered by a 12V battery.

The device is a digital sensor with an NFC front end that can be integrated into smart labels. A unique ID as well as logged temperature and other data stored in its internal memory can be read by any authorized NFC reader such as a smartphone or tablet.

Certified for medical applications, the MPC102-845 is designed to be integrated with nursing carts and medical devices as a point-of-care terminal or infotainment terminal.

This release focuses on leveraging global connected data sources to unlock data insights across the extended enterprise for optimizing overall plant performance.

PickAPP is an Android application for an 8-10-inch tablet, configured with graphical operations designed to improve the overall user experience.

Bedrock OSA AD will be available as standard integrated functionality that continuously monitors the controller’s network and system time to detect intrusions and anomalous behavior.

The pairing is advancing the Internet of Things (IoT) by creating a turnkey, smart home system for operators that integrates gateways, sensor devices, cloud platforms and mobile applications.

Emerson SolaHD SDN2X redundancy modules continuously monitor two power supplies connected in parallel. In the event one power supply fails, the SDN2X automatically changes over to the second power supply.

The Falcon4 cameras are powered by Teledyne DALSA’s 86 megapixel global shutter CMOS image sensor, which outputs up to 16 full resolution frames per second, and higher with windowing.

Offering smart diagnostics and remote proof-testing capability, the device is designed to provide reliable level detection while helping increase safety and efficiency of both plant and workers.

The VC155 digital multimeter is designed for measuring and displaying electrical parameters up to a maximum of 600V. The unit’s DC voltage measurement range is from 0.1mV up to 600V; and the AC range is from 0.1V up to 600V.

The 0RQB-D0W12LG module is a fixed frequency DC/DC converter that uses synchronous rectification to achieve thermal performance and conversion efficiency. The regulated and 2250 VDC isolated 12 V output comes with a baseplate for heatsink mounting and thermal management

With a color display, button operation and image capture/download capability, Camβ is designed for roving inspection tasks, documenting faults and inspecting large or immobile subjects

Combining an eddy current sensor and a capacitive displacement sensor in one housing, the concept of the new combiSENSOR from Micro-Epsilon is designed to enable enable precision thickness measurements of plastics.

Enabled with IO-Link technology, the Bulletin 871FM sensors deliver more comprehensive diagnostic and parameter data to the controller over EtherNet/IP from the IO-Link master module.

With its Sinumerik CNC software release 4.8, Siemens is making a range of new functions available to improve the speed, precision and safety of machine tools. Features of version 4.8 include facility for compensating unwanted axis nodding movements and protection against machine, tool and workpiece collisions.

With an extended range of settings and process data options, the 12 mm wide EL922x EtherCAT Terminals are designed to meet diverse requirements and enable transparent system monitoring.

The newest release of Shapr3D integrates Parasolid and HOOPS Exchange to allow solid modeling and data translation locally within the app, taking mobile CAD experience to a new level unmatched by any other CAD tool.

The 9900CX uses 350kVA power modules mated to intelligent bypass modules. The bypass modules are available in 1050kVA, 1400kVA, 1750kVA, and 2100kVA, and are paired with up to six power modules.

Thanks to IO-Link integration, the level switches are Industry 4.0-ready. The communication interface enables each application to be configured using standard network components.

The new MQTT Client driver is a key component of the KEPServerEX version 6.4 release. Inclusion of this driver enables users to collect data from sensor networks and other devices that utilize MQTT

NI’s FieldDAQ are designed to acquire reliable measurements in the severe test cell and outdoor environments, including rain, sleet, snow or mud. FieldDAQ devices have an ingress protection rating up to IP67 (dust and water resistant), can operate in -40 °C to 85 °C environments and can sustain 100 g shock and 10 g vibration.

Version 11.4.5 of eMaint provides companies with an integrated system designed to improve the way organizations monitor equipment health and manage maintenance operations, resources, and compliance.

SBT can operate as an upgrade to an existing line or a replacement for a fail-safe PLC on a new build. SBT is a solution independent of a particular control system and network.

Potential uses for VIP Tower include, but are not necessarily limited to, energy plants, water municipalities, remote pumps and pipelines. VIP Tower is designed to improve local process efficiency, asset lifecycle management and service quality.

The transportation embedded system is suited for transportation-related applications such as security surveillance, onboard devices controller, truck fleet management, data transfer, and onboard passenger infotainment system.

Kuebler’s Sendix 5000 and 5020 incremental encoders are designed to overcome two common threats to encoder lifecycle: heavy vibration loads and misalignment due to installation errors.

The software is designed to open up potential in machine building, for instance, through consistent real-time synchronization with other automation tasks or support of track-and-trace solutions.

The modular maxGUARD system is designed to meet specific requirements for automation control panels. It contains three main cross-connection channels– positive, negative and internal signaling.

With a holding force of 112N, the 35DBM stepper linear actuator is suited for use in applications such as auto injectors, laboratory automation, medical pipettes and valve actuation.

The roller links have small ramps in front of and behind the rollers, which reduce noise during movement and help avoid hard impacts when the upper run of the chains is unrolled onto the lower run.

This system joins Logic Supply's ML100 Series of fanless NUC computers, and is powered by Intel's new Dawson Canyon motherboard.

Through support of TSN (Time-Sensitive Networking) functions, the coupler is designed to minimize delays caused by switches in Ethernet networks and the range of EtherCAT I/O Terminals and other EtherCAT devices used in TSN network environments.

With a capacity to communicate with more than 300 brands of controllers and support Modbus TCP/IP, MQTT and OPC UA Client / Server, the cMT-G01 Gateway is designed to enable integration of distinct onsite devices and facilitate data transmission to the upstream monitoring or data management systems such as SCADA, ERP, etc.

The AMP8000 integrates a servo drive directly into a servomotor. By relocating the power electronics directly into the machine, a control cabinet needs to house a single coupling module in order to supply power to multiple servo drives with a single cable via the distribution module.

The IEC 61850 for utility automation is the international standard to regulate a unified and standardized communication protocol for electrical substation and power grid automation.

With seven communications protocols, the TruONE ATS is part of the ABB Ability portfolio of software-enabled and connected solutions, with features including predictive maintenance and condition monitoring. The TruONE ATS requires a single wire and standard enclosures.

Operating on an open-based platform with Modbus RTU communication protocol, the Mirador integrates with sensors, communications, and software to provide full operational visibility, tracking, control, and analysis over chemical injection processes from a remote control station.

The C6030 is designed to be able to accommodate almost any automation and visualization task, including complex axis control, HMI applications, data handling and applications.

The cMT series model support multiple connectivity options, including MQTT and OPC UA, direct connection with data base, and more than 300 communication protocols.

EtherCAT joins Alicat’s offering of industrial automation protocol options, which also includes Modbus TCP/IP, Modbus-RTU, EtherNet/IP, DeviceNet and PROFIBUS communication options to fit new or existing systems.

The DigiFlex Performance panel and pcb mount servo drives offer full tuning control of all servo loops and are designed for distributed or centralized servo systems.

The Fluke 3560 FC Vibration Sensor wirelessly and remotely captures simple vibration screening data on imbalance and misalignment. Remote vibration monitoring allows maintenance managers to monitor asset health and reduce the reliance on vibration specialists.

This is intended to provide the ability to develop industrial IoT solutions on a shorter timeline for customers across various industries, especially aerospace and defense as well as energy and utilities.

Provided in a 4.5mm x 4.7mm x 2.5mm land grid array (LGA) apertured package, the AS7264N’s size makes it well suited for luminaires and connected sensor packs

The 7TCE is recommended for motor connections between servo controllers and motors on industrial machines, tray applications and moving machine parts, assembly handling and integrated production systems.

With the additional module, HARTING MICA is now able to capture and process data through SmartMESH IP (DUST), Bluetooth Low Energy and a XBee slot, regardless of the existing machine controls.

The new Double Gold Twitter delivers over 10,000w of qualitative power, fit for applications that require a reduced footprint and high power, such as large robotic vehicles, antennas and tracking systems, high power machine tooling, large printer rolls and more.

With this release, GE is bringing the same solutions to applications in oil and gas, water/waste water and other infrastructure industries with small and large assets requiring smaller footprints.

Applications include wet/dry detection, sump level detection, high/low level alarm and control, interface control in separation vessels, foam and sediment interface control, and agitation detection.

Typical applications include experimental stress analysis; electronics drop testing; printed circuit board (PCB) and finished product component reliability and subassembly testing; engine vibration monitoring; and fatigue life testing.

The SBC product family will benefit from multi-core scalability and will be available in various versions ranging from low power dual-core up to eight-core processor variants and beyond on VME and VPX architectures

By integrating Qt’s cross-platform framework, user interface (UI) development tools and machine-to-machine communication libraries with Azure, Qt will provide HW and OS independent access between the cloud and edge devices in manufacturing, retail, transport, logistics, smart cities and more.

The Ovation OCC100 controller extends Emerson’s Ovation control technology by managing the flow of energy from various sources to ensure continuous generation for these emerging industries. This scalable technology is also well-suited to critical water and wastewater applications.

Like YuMi, a dual-arm assembly robot introduced in 2015, the single-arm robot has a payload of 500 grams and is integrated into existing assembly lines

With HCME, HARTING has developed a series of devices that work according to the principle of direct imaging - open loop - and use rectangular cores.

The 125 x 95 mm system-on-module was designed for graphics-intensive applications over the Industrial IoT, including industrial control, medical imaging, digital signage, and gaming machines.

The RollVIA system is used for plasma applications such as surface activation for improved adhesion, carbon removal and descum/desmear for cleaner surfaces, and etchback, which removes a slight amount of dielectric contamination between internal copper planes during production of PCBs.

FANUC’s SCARA robots feature operation for pick and place, assembly, testing/inspection and packaging processes in a range of industries including consumer electronics, auto component, plastics, food and beverage, lab automation, appliances and medical device manufacturing.

ABB’s TruckMaster solutions are designed to increase personnel safety by maintaining a safe distance between personnel and equipment during operations, providing a means to avoid injuries such as internal arc events.

The capaNCDT DTV capacitive displacement measurement system measures the thickness of brake discs from both sides, enabling the exact determination of the so-called Disc Thickness Variation.

Simit enables real-time simulation and emulation for the evaluation of automation solutions. Testing and optimization can be carried out either using a real or a virtual automation system, the so-called virtual controller.

HARTING has developed a transmission principle which involves relocating the transceivers of the controller board into a pluggable module and thus integrates the optical interface according to the principle of "electrical plugging and optical transmission".

With its release the company augments PlantESP’s ability to support the diagnostic and optimization needs of single site, multi-site and enterprise process manufacturers on a global basis.

The migration combines a Unity M580 application converter with a migration expert configuration utility tool, which identifies operational gaps and provides recommendations to solve each customer’s unique systems challenges.

The controller is suited to act as an Industrial Internet of Things edge node in harsh locations including spray down manufacturing environments, test cells and outdoor locations without the need for a protective enclosure.

GE Healthcare is among one of the first customers that will implement this Plug & Produce solution. The “Shop Floor Integration for Life Sciences” module is a new addition to the ABB Ability Manufacturing Operations Management (MOM) offering.

The strain relief system is designed as a replacement for commonly used cable tie-wraps and other strain relief solutions.

Measuring 19 x 50 x 10 mm, and weighing 12 g, the iPOS2401 MX-CAT drive can be used in high precision positioning applications with any motor technology (brushless, stepper, DC/voice coil or linear) that requires no more than 1 A continuous at 24 V.

By offering low start-up current levels, this addition to the series is designed to open up greater application scope: for instance, to comply with sector-specific requirements in the process industries, or in fields requiring enhanced grid stability by reducing grid loads in the event of voltage dips.

Building upon the needs of Dataiku customers who have hundreds of users across their organizations around the world relying on the software, Dataiku 4.1 has been designed to accelerate scalable deployment while maintaining its core functionalities

Features include a service life of more than 10 years, continuous operation from -20°C to 55°C and no thermal runaway issues that are inherent in Lithium-ion chemistry

This data-driven analytics algorithm is delivered inside a module that fits directly into the controller chassis. Once installed, Project Sherlock AI leverages novel physics-based modeling to “learn” the application that controller manages.

This offering was designed for location-based control of equipment and facility resources. It is particularly suited for Industrial Control Systems (ICS) including Building Management Systems (BMS), Supervisory Control and Data Acquistion (SCADA) and Human Machine Interfaces (HMI) as described by U.S. Patent No. 9,819,509.

The SiteLink platform consists of three types of VPN routers and two antenna sets (Wifi and cellular). 5GB monthly data bandwidth is included free and subscription options include additional bandwidth (up to 50GB) and cloud data logging.

The digital controller is designed for thermoelectrics and resistive heaters where tight temperature stability is required. Stability better than 0.0009°C can be achieved with thermistors.