Industry Products

Fluke Condition Monitoring consists of wireless sensors and a gateway that receives signals from the sensors from up to 30 feet away and works with Fluke technologies, such as iFlex current probes, current clamps, temperature sensors and three-phase power monitoring.

IXARC encoders with the CANopen communications interface are a good choice for applications in vehicles, mobile machinery, cranes, lifts and offshore equipment.

EPLAN will conduct demonstrations of EPLAN Smart Wiring at the company’s booth (#1915) at Automation Fair, Nov 9-10 in Atlanta, presented by Rockwell Automation.

The Ethernet IP Marquee is a marquee sign that connects and communicates on the Rockwell Ethernet/IP network. The Ethernet IP Marquee has a built-in WEB server, eliminating the need to install software to program the sign.

With maximum continuous torque up to 98.5 mNm and higher stall torque, 22ECT motors are ideally suited for use in applications such as Industrial automation, power tools & robotics.

The modular Han-INOX connector series is designed for outdoor applications and use in the food industry and process technology.

The DRM-24V480W1PN has built-in active PFC and an efficiency of 94.17% typ. @ 230Vac. Additionally, the product also includes built-in DC OK contact; LED indicator for DC OK/ Overload; full power from -25°C to +60°C operation at 5,000m or 16,400 ft. altitude.

Standard features include EN 55022 B emissions, active power factor correction to EN 61000-3-2, I/O isolation of 4 kVAC, and up to 93% efficiency. a standby 5V output.

The Table Top Assembly System comes complete with sensors, controls, software and safety equipment to provide a virtual turn-key solution that can be up and running in 30 minutes

AVEVA Connect is a Software as a Service (SaaS) ecosystem for Engineering, Design and Information Management Products.

The Sirius 3RN2 replaces the preceding 3RN1 series, and with widths of 17.5 and 22.5 millimeters these relays require less space in a control cabinet. A standardized supply voltage reduces the number of versions.

When paired with a sensor, this lighting relay can provide occupancy-based on/off as well as daylight harvesting functionality. The relay can also be paired with a wireless light switch for localized control as well as dimming.

The E-727 is designed for multi-axis nanopositioning applications, such as 3D imaging in super-resolution microscopy, laser beam steering, and fast alignment applications.

the 700HPPK Pneumatic Test Pump Kit is a solution for generating high pressure in the field to devices under test (DUTs), such as transmitters, controllers, pilots, analog gauges, and more.

This range is suitable for the Oil & Gas and Specialty Chemical industries that need fast and efficient condensate removal.

EERAM is a standalone SRAM memory with shadow EEPROM back-up on a single chip that helps automatically retain contents of the SRAM memory when system power is lost.

APL vision inspection systems are designed for a broad spectrum of components. Quality control checks, OCR (optical character recognition) and batch sorting applications are a few examples. The systems have been developed to meet high speed quality control requirements for 100% inspection. Our experience with handling systems is key to offering a total solution when integrating vision software.

SureMotion MXL series timing belts are 1/4-inch wide, have a 0.080-inch pitch, and are available in neoprene with fiberglass reinforcement and urethane with polyester reinforcement styles. Also referred to as sprockets, MXL-series aluminum timing pulleys have a 1/4-inch width and feature a smooth bore with setscrews, a 0.080-inch pitch and range in size from 10 to 120 teeth.

APL Robotic and Vision guided handling systems are versatile units, that have the ability to singulate and manipulate a diverse range of components, including plumbing fittings, plastic mouldings and confectionery. The systems have been developed to automate components from bulk, inspect manipulate and place into the down stream equipment.

Designed to meet the rigorous timing requirements for industrial automation, the reference solution delivers EtherCAT cycle times of 100 microsecond cycles (10,000 frames per second) with a low jitter rate for precise device synchronization.

The Go-Scan systems are designed for industrial X-ray inspection and non-destructive testing applications in the Oil & Gas, Petrochemical, Shipbuilding, Aerospace, Defense and other related industries.

Predictive Asset Analytics Suite is designed to bridge skills and process gaps with smart technology, combining advanced predictive analytics with knowledge management and decision support to maximize asset availability.

The PCIe-GIE72/74’s utility and APIs provide real-time PoE status monitoring of device class, voltage, current, wattage and temperature. PoE power can be remotely switched on and off; PoE port priority and thermal thresholds remotely set; and possible failure predicted.

The fifth release of Matrox Design Assistant features a more image-centric approach to project configuration, whereby measurements are set up directly on the image itself, rather than through configuration panes.

The Graphite platform is ideal for factory automation and process control environments that may include manufacturing, oil & gas, water/wastewater, power, utility transportation and maritime.

The EC044A is a 44mm brushless motor available in a range of lengths, windings and gear ratios to accommodate a range of user application requirements. The EC042B is a smaller 42mm motor.

The industrial bar coding system combines factory-installed software with a networkable touch screen instrument and industrial thermal bar code printer.

To fulfill users’ different needs, the Axiomtek IMB500 is equipped with multiple I/O connectors including two RS-232/422/485 ports, four RS-232 ports, one PS/2 keyboard & mouse, four USB 3.0 ports, eight USB 2.0 ports, five SATA-600 with RAID 0/1/5/10, one mSATA, two Gigabit LAN ports, and eight channels digital I/O, HDMI, DisplayPort and VGA interfaces.

Designed specifically for harsh environments and available in five ruggedization levels for optimum performance, the PPC11A is ideal for applications such as command and control

The SEL-3360E and the SEL-3360S are industrial computers designed for extreme environments and small spaces. The SEL-3360E operates in environments ranging from –40° to +60°C (–40° to +140°F) with no fans or forced airflow.

The P6121 is a solution designed for POI/POS and human machine interface applications in a variety of heavy-duty industrial environments.

The MGB Series of SCR (silicon controlled rectifier) controls are specifically engineered for OEM applications that require a controlled deceleration, braking or instant reversing, such as indexers, lift pumps, agitators and conveyors.

The Cerabar PMP11 and PMP21 pressure transducers measure pressures from -15 to 6,000 psi at temperatures from -40 to 212 °F with accuracy of 0.5% and 0.3%, respectively.

SuprOS provides network-wide visualization tools for fault, configuration and performance management from a single console. It can manage thousands of communication network devices.

A cantilevered duplex differential slitter rewinder, the 438 offers converters a solution for their slitting needs. This machine is well suited for a wide range of products, including shrink sleeve, film, film laminates, self-adhesive label stock, paper and other flexible materials.

The RA-130 is designed for sampling sucrose concentrations of fruit juices, brix measurement of beverages, concentration control on pharmaceutical and medical liquid samples, and more.

R15 is designed to accelerate all aspects of the user and organization experience, and enable broader adoption of current deployments in the oil & gas, pharmaceutical, chemical, energy, and food and beverage industries.

The LRZ0603 offers a compact 6A zero ohm link in a surface mount ceramic chip format. The LRZ0603 can also be used as a crossover to simplify PCB design by reducing the number of layers needed.

Features available in the software include the ability to print a load cell diagnostics report, and to update existing tare weights. The software revision also adds the Epson TM-U220 to the list of printers usable with the instruments and software.

The FV-3543-2 continuously captures temperatures and thermal images in up to six user-defined zones. The camera is ideal for a range of industrial applications including metals manufacturing, food processing, engine testing, and flare stack monitoring.

These crimp tools feature ergonomically shaped handles with hardness and surface textures for frequent use, a non-slip grip pad for applying pressure against a surface, and ratchet action to ensure crimps are completed according to specification.

Bearings made from RW370 have been tested at the igus laboratory in Cologne, Germany, and they are well suited for door guides and hinges, as well as in rotating joints and adjustment mechanisms for seats and tables.

This service pack improves existing HTML5 and custom widget capabilities, introduces an add-on conversion tool for FactoryTalk applications, and enhances IoTView.

MIL CoPilot will be made available in Q4 2016, via the MIL update service, to all registered users with maintenance subscriptions in good standing, as well as those seeking to evaluate MIL.

The new generation of PS131 transmitters was developed in close coordination with the users. Its modern and userfriendly design stands out. High overload protection and best accuracy. PS131 is a pressure transmitter with a pressure switch to safely and absolutely measure and monitor gauge pressures.

Industrial Video & Control (IVC), is pleased to introduce a radiometric thermal camera for monitoring temperatures in industrial processes and equipment. The FV-3543-2 can aid in the detection of process hot spots and abnormal hot and cold temperature changes and is ideal for a range of industrial applications including metals manufacturing, food processing, engine testing, and flare stack monitoring.

The NEMA 3R transformers are designed for dust or lint-laden atmospheres and are suitable for indoor and outdoor use.

The HG1G display is TFT Color LCD with high resolution of 480 x 272 pixels, 65K colors, and 800 cd/m2 brightness. Viewing can be configured for either portrait or landscape, with a viewing angle of 60 degrees from top, 65 degrees from the bottom, and 70 degrees from left or right.

The EXP-MS-N4X-AT-HV explosion proof motion sensor from Larson Electronics is designed for operators seeking a sensor rated for use in hazardous areas designated Class 1 Division 1 and Class 2 Division 1.

This meter is suited to the Oil & Gas Industry for high pressure chemical injection applications, as well as gas measurement applications such as engine test benches, hydrogen fuel stations and high pressure gas measurement

One of the main benefits in terms of security is the ability to store the private encryption keys for creating OPC UA security profiles no longer in a file, but rather in the smart card embedded in any of CodeMeter’s hardware secure element (CmDongles).

There are 12 standard sizes in the family, ranging from 24 x 42 x 8 inches to 48 x 48 x 12 inches. Manufactured from formed 12 gauge steel, phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.

The MPFM 2600 M can identify and measure non-symmetrical flow in varying flow regimes. The meter includes the signal processing, field electronics and electrode geometry innovations of the third generation MPFM 2600.

UniLogic version 1.18 introduces features and enhancements that extend the application reach of UniStream, Unitronics’ One HMI + PLC controller.

The ball valves were originally developed for use in painting stations and therefore ideal for hygiene applications in the food processing industry.

The XR22404 and XR22417 are designed for applications where power consumption and board space are a concern such as docking stations, point-of-sale terminals, USB port expansion, test instrumentation, factory automation and other industrial applications.

The EtherNet/IP encoders are available in both singleturn (RS-107/108) and multiturn (RM-105/106) variants and come with a diameter of 58 mm, offer a total resolution of up to 32 bits (16 for singleturn, 16 for multiturn), and have been designed specifically for high-speed applications

When combined with Phoenix Contact’s new Thermofox handheld printer, Thermomark Prime can provide a solution for on-site marking of terminal blocks, conductors, cables, and devices.

The AI25 EtherCAT Encoder offers cycle times of 62.5 μs and 22 bit single turn resolution with absolute accuracy of ±35” making the encoder ideal for applications requiring accurate real time speed and position data such as robotics, packaging and high end motion control.

DMP305X Mono silicon pressure transmitter is a high performance pressure transmitter with international leading technology meticulously designed by LEEG instrument, using the world's most advanced monocrystalline silicon pressure sensor technology and patent encapsulation technology. The pressure sensor locates on the top of the metal body and stay away from the medium interface to realizes mechanical isolation and thermal isolation.

The SWaP-optimized VME650-series power supplies were released this week from Aegis Power Systems, Inc. to immediately replace previous models -- giving VME embedded application developers in military and industrial markets more power while maintaining competitive pricing.

Aimed at designers of power supplies, battery monitoring, process control and point of load converters, the LCS resistors will find acceptance for use in market sectors such as industrial, medical, instrumentation and IT.

Targeting high-speed real-time motion control systems, NEXCOM EtherCAT master controller series can accelerate the execution of complex automation schemes, intricate robot control, and sophisticated image processing, allowing deterministic control and machine vision integration of advanced motion control applications.

ADLINK’s SEMA 3.5, which is able to monitor and collect system performance and status information from devices and control system functions, now supports operating systems (OSs) such as Windows 10, and supports the latest x86 and ARM SoC generations.

This serialization suite is designed to provide consistent data, unified reporting and analysis and standardized best practices to enforce collaboration, compliance and data consistency across multi-site implementations.

A 30 hp spindle with 146 ft. lbs. of torque allows this machine to cut challenging metals such as titanium and Inconel as well as stainless steel and aluminum.

The confocalDT 2471 chromatic controllers are designed for high speed distance and thickness measurements of mirrored, transparent, shiny and diffuse surfaces.

Hengstler ACURO-AX73 carries ATEX and IECEx certification for gas and dust explosion proof requirements. It is designed for use in applications such as winches, cranes, drills and other oil and gas industry equipment.

The LKC-1500 comprises a leak detector controller in a DIN-rail mounting enclosure and up to 1500m of leak sensing cable. The controller is able to detect a leak and indicate its position as a distance along the cable from the controller.

Cortet is designed for OEMs and developers to radio enable their appliances, devices and sensors, and also integrate them into an intelligent solution complete with local and IoT based controls, analytics and application software.

Wonderware Online InStudio is a secure, cloud subscription service that lets systems integrators overlay a next-generation infrastructure that is available and scalable.

The PowerXL DG1 is a 250hp general-purpose drive that incorporates an energy control algorithm, onboard industrial communication protocols and built-in harmonic reduction

Prometheus is a configuration tool for defining, programming and documenting all components in an industrial control system, from the Manufacturing Execution System (MES) to the I/O.

The P-616 NanoCube XYZ piezo scanner is a redesign of PI’s successful P-611, 3D positioning stage. Now based on a parallel-kinematic design, with one moving platform for all 3 axes, higher precision and dynamics are available.

This system is well suited for automation applications such as robotics, automated de-stackers, sheet feeders and in-fixture (Poke-A-Yoke) where sensing from only one side is possible.

BEI Kimco developed Brushless DC (BLDC) motors DIT11-15 and DIH40-49 to meet the necessary specifications of the individual centrifuges including operating speeds approaching 25,000 RPM.

Designed specifically for harsh environments, the AWK-4131A-US-T can be used in a temperature range of -40° C to 75° C (-40° F to 167° F). It is optimized for installation in railwaysand marinas, as well as critical industrial applications including IP video surveillance.

The solution provides a scalable warehouse management system with a family of logistic automation modules including a transportation management system (LFS.tms)

The type 400 is equipped with 16 universally usable, differential analog inputs for measuring mV and mA signals or any type of thermocouple.

This touch panel PC is well-suited for use as a human machine interface in smart factory automation, healthcare facilities, and smart building automation applications.

The DP15 was built with flexibility in mind, it provides wet / wet differential measurements which accepts liquids and gasses on both sides of the diaphragm.

RMB 3600 Series sensors are EGMR (enhanced giant magnetic resistance) devices that count turns even when power is removed and retain the turn count and angle information for years without power.

The design is ideal for optical microscopy, scanning probe microscopy, x-ray transmission microscopy, and other applications where two-sided part access is required.

The universal mating face with L-coding has also emerged from this adopted standard. At 63V/16A, the 5-pin L-coding achieves 0.75kW of power, making it ideal for small servo motors, field distribution boxes, field-bus-controlled I/O boxes, power supply devices and valve applications.

The Aventics electronic module evaluates the data locally and uses it to generate information about the status of the system. Via drag & drop on a graphical interface, users define the components of the pneumatics system they want to evaluate.

FactoryTalk Batch View software is well-suited for large industrial facilities that have workstation infrastructure limitations, and require multiple access points across the plant.

This addition to the drylin W toolkit is designed to enhance possibilities in applications including marine, aerospace, and stage technologies.

Designed to detect the difference in the wavelength of the reflected light between a target mark and background, the contrast sensors use RGB light emission with automatic selection, and feature sensitivity adjustment, and light on/dark on outputs.

The MPTC software was initially developed to ensure the operation of compressor stations during voltage disruptions, caused by lightning strikes, winter storms or ice buildup on power lines.

Designed for use buses and train cars, ARD-028-N, with its TFT active matrix LCD screen, is also a digital signage display and media player that delivers advertising, time schedules and location of the vehicle where it has been installed.

More stable than SATA

PAS-X KPI is a KPI/OEE tool dedicated to the pharmaceutical and biopharmaceutical industries. It is capable of integrating data both from the ERP level and the machine level at the shop floor.

The transmitter meets CE, UL, and CUL standards and is suitable for a variety of applications including water/wastewater treatment systems, reverse osmosis, deionization, media filtration, chemical manufacturing/addition, air/fume scrubbers and cooling towers.

Extreme Engineering Solutions (X-ES) Intel® Xeon® D-1500 family processor-based single board computers now support up to 16 Xeon®-class cores in a single, power-efficient, System-on-Chip (SoC) package with native extended temperature support on four, eight, and twelve core-count SKUs.

With 316 stainless steel housing and sealed display, the X80 Transmitter and the S88 Sensors are designed to eliminate the need to inventory multiple instruments.

The STAC6-Q-H stepper drive is ATEX and IECEx certified for Class I, Zone 2 locations, and UL certified for Class 1, Div 2, Group C & D locations.

The DSC6000 MEMS oscillators are solutions for use as clock references in small, battery-powered devices such as wearables and Internet of Things (IoT) devices and are suited for under-hood applications as well.

This module, enabled by Predix, GE’s operating system for the Industrial Internet, works with existing systems to provide true visibility into where work orders are in the manufacturing plant.

Evolved from the designs of the Pentek Cobalt and Onyx architectures, Jade is based on the Xilinx flagship Kintex UltraScale FPGA.

The drive’s size and power range, combined with PLC functionality, makes the VACON 20 a solution for packaging machine applications.