Industry Products

With the EK1132 Power over EtherCAT junction terminal, EtherCAT sensors can now receive power over standard Cat 5 cables.

Viper switches are designed for applications with severe operating conditions and extreme environments.

Enhancements to BizViz V9.13 include EarthWorX Web Part for geographically contextualizing enterprise information and key performance indicators (KPIs).

Upgrades include GENESIS32 V9.13, GENESIS32 V8.05 and the V8 Service Pack 3.

Enhancements automate techniques and tools for the integration of requirements traceability with software testing and verification.

Adding a CANopen option card allows drives to be controlled by a CANopen master using DS301 and DSP402 communications protocols and the CAN 2.0b Passive physical layer.

Ductorseal sealed wire and cable assemblies solve bulkhead conductor sealing problems by providing an interconnecting harness in an hermetic feedthrough.

The kit contains a Dual Real-Time Ethernet (DRTE) module, baseboard, software, reference design, and all the cables required to evaluate the EtherNet/IP solution right out of the box.

FlexTorq 762 series hollow shaft offset DC gearmotors can be driven by 1/20, 1/4 or 1/2 HP permanent magnet 90 volt DC variable speed motors.

TFX replaces obsolete Bailey 3 Series Stepper Motor Drive modules for valve actuator positioning.

IGS-3044GP supports 8 Gigabit ports with 4 ports of 10/100/1000Based-T(X) and 4 ports of 1000Based-SFP for multiple flow Gigabit environments.

The low-cost LC uses an AMP or Tyco brand connector for both motor and feedback connectors.

FRCIR connector combines Ethernet and MVB cable lines in a single interconnect package for shielding against interference and contaminants.

Scenario Virtual Engineer offers power generators a solution for building, testing and verifying control logic and process graphics without impacting ongoing plant operation

UNO-1170 has an Intel Celeron M or Pentium M CPU, 512MB/1GB DDR SDRAM, can operate in temperatures up to 60°C, and has a 512KB SRAM battery back-up system in the event of sudden shut down.

Based on the Piezo Walk principle, NEXACT combines high forces and long travel ranges with sub-nanometer resolution in a small package.

24S24.8TH has a 4:1 input range of 9 to 36 Volts DC in a 200 Watt industry standard half brick package. Price: $115.50

ProSense pressure transmitters now support five new input ranges for higher (200 psi, 3000 psi) and lower pressures (15 psi, 30 psi). These compact pressure and vacuum transmitters are designed to monitor system pressure in hydraulic and pneumatic applications. They are smaller and easier to install than mechanical models. Prices start at $125.

RHP line includes 3 phase contactor configurations rated at 120, 240, 280 or 600 VAC at 40 or 50 amp load ratings to replace Mercury Displacement Relays.

On Demand message feature sends SMS messages from a mobile device to the silent sentry to read any of the digital and analog/counter I/O values.