Industry Products

The 56-Series Modline 5 has a 2 micron range and temperature capabilities of 122 - 1472° F / 50 - 800° C. It is suitable for spot weld or induction heat metal treating applications, as well as lower-temperature rubber, thick plastic or textile applications.

Models include the 32-channel SNAP-AIMA-32 current input module; 32-channel SNAP-AIV-32 voltage input module; and the 16-channel SNAP-IAC-16, SNAP-IAC-A-16, and SNAP-IDC-16 digital input modules. These I/O modules connect to and communicate with sensors, actuators, instrumentation, and equipment in industrial applications

The fanless industrial grade panel computer is suitable for HMI (Human Machine Interface) applications.

IndraLogic PLCs now have DeviceNet and EtherNet IP connectivity.

Housing holds one JetNet 3705 4-port industrial unmanaged PoE switch, one extra uplink port, and one extra uplink Fiber port. The housing has an aluminum case.

EQuan Environmental Quantitation System coupled with the TSQ Quantum triple quadrupole mass spectrometer is a turnkey system for the analysis of pesticides, herbicides, antimicrobials and pharmaceuticals in environmental and drinking water samples.

UEIModbus Ethernet-based data acquisition and control interface communicates with a host computer or PLC over Modbus TCP. It functions as a Modbus slave easily accessed by any software client acting as a Modbus master.

USB digital I/O modules include USB-4750 32-channel, USB-4751 48-channel, and USB-4751L 24-channel. All include USB connectors with screw fasteners and DIN-rail mounting kits. They draw power directly from the USB port and therefore do not require an external power supply.

The 82357B provides a direct connection from a USB port on a laptop or desktop PC to GPIB instruments. Its USB 2.0 connectivity offers easy plug-and-play setup, as well as a high-speed GPIB transfer rate of 1.15 MB/s or better.

The overall processing speed of the MicroSmart Pentra's CPU is 16 times faster for simple instruction execution, and more than 14 times faster when executing advanced instruction sets. It supports double-word and floating point math operations, capturing and storing large values, and returning computed results accurate to seven decimal places.

The AS5140H 10-bit rotary encoder IC is qualified to AEC-Q100 and designed for applications in an ambient temperature range up to 150°C. With a resolution of 0.35 degrees, it can recognize 1,024 positions within one 360° turn, and is accessible with either a serial or a PWM (Pulse-Width Modulation) interface.

MEN single-stage, end-suction pumps deliver maximum mechanical and hydraulic flexibility, and are ruggedly designed to provide reliable performance in a variety of water services. These areas include water supply, water treatment, irrigation, drainage, filter cleaning, water circulation and HVAC.

IV7C can read RFID tags anywhere within reach of a forklift. It can be configured to read multiple air interface protocols in mixed populations of tags, including EPC UHF Generation 2 (Gen 2) and ISO 18000-6b and 6c. It is both ETSI and FCC certified and RoHS compliant.

The EM-9360 is a low power SBC that offers a cost-effective solution for users requiring legacy feature support, low power and a small footprint. System designers can build on the EM-9360 with the confidence of guaranteed supply until 2010.

7/16 DIN connectors for LMR-600 cable include RFD-1600-2L2, which attaches to the cable with a solder/clamp method, and RFD-1505-2L-2, which attaches with a crimp/solder method. 7/16 DIN connectors are large format 50 ohm interfaces designed for high power wireless telecom applications.

IDENT Control RFID product identification and data collection solution is now available as a 13.56 MHz (HF) system. This transmission frequency enables more data to be transmitted faster making it possible to read large amounts of data on the fly. The system supports DeviceNet, Ethernet, and PROFIBUS protocols, as well as RS232 serial communication.

Enhancements include increased power, speed and expanded communication capabilities. An embedded communications port and Web server give users access to control information for real-time data sharing with OEM partners, remote maintenance engineers and personnel.

TES-5 Series of low profile, surface mount dc/dc converters offer 5W of power and a 2:1 input range of 9-18VDC, 18-36VDC, or 36-75VDC with single or dual outputs. Input to output isolation is 1500VDC. It has short circuit protection, remote on/off, operating temperature of -40ºC to +85ºC, with full load achieved up to +71ºC.

The E3000 Series incorporates 3-phase brushless DC motors for smooth rotation, high power, maximum speed of 60,000 rpm; and maximum power of 350W. The modular motors can be connected with a wide variety of Ultra-Precision spindles, straight, short length, 5 different 90° Angle Types, quick tool change and direct chucking, air release collet ATC types.

The active front-end devices in the b maXX 4100 series make energy regeneration possible in any servo system. Regenerative converters are effective on large machine tools or grinding machines, and machines running in reversing duty, where sudden acceleration followed by deceleration is typical.