Industry Products

The introduction of three-phase AC drives means that users can build all-Ethernet systems with the optimum choice of motor technology for each axis, from small to large loads. Rotary and linear versions of brushless servo, and AC vector motors are all software selectable.

The DataMan 7500V handheld verification unit accurately verifies the quality of direct-marked and printed 2D codes. It enables compliance to the AIM (Association for Automatic Identification and Mobility) Direct Part Mark (DPM) Quality Guideline DPM1-2006.

To keep cables separated and free from premature wear, modular separation components can be easily incorporated into any Energy Chain System. Available in both vertical and horizontal arrangements, using separation components prevents cables and hoses from chafing, twisting and corkscrewing and as a result, significantly extends their service life.

IntelliBox enables customers to connect industrial, commercial, medical, retail and security equipment to IP networks and the Internet to automatically monitor and respond to events in real-time with no human intervention. Triggered by an event, the IntelliBox automatically responds with pre-determined, user-defined responses.

USB-4716 200 kS/s 16-bit multi-function USB I/O module includes a USB connector with screw fasteners and a DIN-rail mounting kit. It draws power directly from the USB port and therefore does not require an external power supply.

Beckhoff Automation has introduced the C6920 and C6925 Industrial PCs. These PCs feature 3 1/2 inch motherboards, which make it possible to utilize Intel Celeron M or Pentium M processors up to 1.8 GHz. Despite the processing power, C69xx PCs are incredibly small, measuring 2.6” x 9.1” x 4.6” (W x H x D) in the “largest” housing configuration. Assembled with thick plating, the PC housings are still built to last like all Beckhoff Industrial PCs.

IndraMotion for Metal Forming Roll Feed system contains pre-defined, user-activated functions needed for specific applications such as roll feed and a flying cut off. All the user must do is set the length, speed and quantity parameters. One model uses standard fieldbus protocols (Profibus, DeviceNet).

The BIMETAL Dual-Mode Remote Thermometer provides on-site indication of process temperature conditions, and simultaneously provides a mV or ohm signal proportional to temperature for input to a transmitter, Remote Terminal Unit (RTU), controller, recorder, indicator, PLC, DCS or SCADA system.

Enhancements include an integrated module for electronic flow measurement (EFM) applications, support for additional master protocols, enhanced system and query processor performance, optimized vector graphics, a sophisticated scheduler utility, an expanded driver library, increased security and alarm management.

Designed to make use of available ceiling space, the Cobra s800 Inverted robot is ideal for over-the-belt high speed packaging for multiple industries, including food and beverage, medical, pharmaceutical, personal care products and electronics.

Rolly 1000 high-speed desktop thermal printer for volume printing of wire markers and adhesive labels has 300 dpi resolution.

Mini PCI fieldbus cards support PROFIBUS, CANopen, DeviceNet and Ethernet networks. The resulting smaller PC size saves valuable control cabinet space, but, like standard PCI fieldbus cards, the interfaces are optimized for fast controllers and real-time tasks.

RF switch modules for 50 and 75 Ohm RF applications include 11 new 4x1, terminated 4x1, dual 4x1 and 8x1 multiplexers as well as quad (4) SPDT and dual-terminated SPDT general-purpose configurations. All have relay count tracking, which allows engineers to keep track of relay closures.

ACME Threaded Shaft Collars provide optimum axial power for applications such as stroke limiting, gear and bearing nuts, or height and spring tensioning. Precision machined with right- or left-hand threads to match ACME shafts, these collars are offered in steel and stainless steel.

The LTQ linear ion trap mass spectrometer with Electron Transfer Dissociation (ETD) provides peptide structure information not available from conventional dissociation methods. It is suitable for protein/peptide characterization, post-translational modification (PTM) analysis and top-down or middle-down sequencing of proteins and peptides.

MultiComponent 2750 Encoded Photometric Near Infrared (EP-NIR) process analyzer covers a spectral range of 1375-2750nm, allowing users access to combination bands between 1950nm and 2750nm. It processes100 scans/second, resulting in high sample throughput, real-time quality control monitoring and extreme sensitivity through spectral averaging.

GE1650 high-resolution, progressive scan, 2-megapixel CCD cameras operate at video frame rates of 30 Hz or more with 1600x1200 resolution for machine vision and industrial inspection applications. Both color and monochrome models are available with either standard C-mount or optional F-mount.

Series CA44 two-station valve manifolds comply with AS-I specification V2.11 Rev. 1. Manifolds are avaiilable with or without digital inputs, and with or without auxiliary power. Plug-in valve design simultaneously makes both the electrical and pneumatic connections when plugging the valve into place - eliminating the need to disturb electrical wiring connections.

Miniature Ball Rail Systems are now avaialble in sizes 7, 9, 12, 15 and 20 in the standard version and sizes 9, 12 and 15 in the wide version.

Field Device Manager R301 supports both the latest Electronic Device Description Language (EDDL) and Field Device Tool (FDT) with Device Type Manager (DTM) technologies without the use of conversion tools or add-on devices. It allows configurations to be managed, monitored and changed for a large number of HART devices. Additionally, Field Device Manager can support Profibus devices through FDT.