Industry Products

Telemecanique ConneXview diagnostic software maps, monitors and troubleshoots industrial Ethernet networks. It provides automatic device discovery, Ethernet device (SNMP) and control-network device Modbus/TCP) mapping, and diagnostics that speed the identification and resolution of problems.

MBS belt scale provides dynamic weighing of aggregates, sand, gravel, or crushed stone.

SeaI/O-OEM family of bus-independent I/O boards offer a choice of host connectivity and a wide range of digital, analog, and serial control capabilities. The boards are suitable for expanding OEM computing platforms including ITX, EBX, EPIC, and ATX designs.

IPS210 controls DC and stepper motors up to 2x12 W (24 V, 0.5 A) with very low inductance, in open or closed loop modes. A single power supply is used for both logic and motor. Its embedded motion controller uses the same high-level motion language for both DC and stepper motors. Complex movement sequences can be programmed directly on the drive while system control functions can be handled from the supervising PC.

KwikDraw-B series includes a multi-function 15, 17 or 19-in. cascadable rackmount monitor, keyboard, touchpad and 1, 8 or 16-port KVM in a 1U 19-inch rack space.

Ventrix 4004 and Ventrix-W 4004 4U rackmount PICMG 1.3 compliant industrial computers are Windows Vista capable. They provide PCI express (PCIe) expansion, use Intel Pentium D Dual-Core LGA775 technology, and have an ndustrial-grade 600W power supply.

Users can now connect serial devices to wired and wireless networks with the Universal Wi-Fi Gateway. The Gateway can also be used to provide communications redundancy over wired and wireless networks, improving reliability assurance for critical applications.

These sensors can measure temperatures within the range -20ºC to 500ºC (-4ºF to 932ºF) with a response time of 200ms and accuracy of up to ±1ºC (±2ºF). A choice of three different fields of view are available: 2:1, 10:1 and 30:1, to ensure that small or remote targets can be measured.

The latest version of Agile-Link wireless nodes have real-time streaming rates up to 4 KHz. This is a 6X increase in sample rate, compared to previous models. Models which support high-speed streaming rates are: G-Lin wireless triaxial accelerometer node, V-Link wireless voltage node and SG-Link wireless strain gauge node.

The UNO-3074 high performance Pentium M/Celeron M grade embedded automation computer comes with two RS-232 ports, two RS-232/422/485 ports with RS-485 automatic flow control, two 10/100 Ethernet ports, four USB ports, and four PCI-bus expansion slots for versatile applications. It supports Windows XP (SP2) Embedded. Prices start at $1,595.

The IF30 reads tags at conveyor speeds of up to 1,600 feet per minute and from distances up to 15 ft. Its increased receive sensitivity allows it to interrogate weaker or otherwise unreadable tags, reducing the need for exceptions handling. It has a built-in power supply and powered general purpose I/O circuitry, which allows direct monitoring and controlling of peripherals, like presence detectors and signal lights, without requiring extra devices and power supplies.

Powerlink Starter Kit contains a Controlled Node--which consists of a basic board with a Phytec microcontroller module and a Powerlink FPGA module--a Managing Node PC card, and all necessary software packages and drivers for the implementation of a Powerlink system.

FlexRay rest bus simulation provides a simulation environment for one or more control devices, so that they can be tested independently of other nodes. This includes the generation of message traffic that is necessary for the device to be tested and reaction to messages.

File Collector monitors a user-specified directory for data files and automatically imports them to any OPC-compliant historian. It typically processes Comma Separated Value (CSV) files containing value, quality and timestamp (VQTs) data points, but can be configured to process any text-based data file.

The two-port UPort 1250I and the four-port UPort 1450I USB-to-serial hubs have 2 KV optical isolation protection on each serial port. Both include selectable RS-232/422/485 communication, baudrates up to 921.6 Kbps, built-in 15 KV ESD protection, and Hi-Speed USB 2.0 operation up to 480 Mbps.

Active Ethernet I/O server reports and controls I/O status based on user-specified conditions. Critical sensor data can be obtained immediately instead being subject to polling intervals. It supports multiple protocols for data transmission, including TCP/UDP, SNMP trap, SMTP (e-mail), and Modbus/TCP.

TT Series Transfer Tubes are air-powered and provide an effective, maintenance-free method for conveying materials at high speed. Available in sizes from 0.375” to 1.0” I.D., with 15 to 95 SCFM air flow, these compact transfer tubes use no gaskets or O-rings and are explosion proof.

eXtremeDB Fusion combines the strengths of on-disk and all-in-memory data management in a single embedded database system. This enables developers to tailor data management to optimize applications for speed and persistence, while taking advantage of the most cost-effective and physical space-conserving approaches to data storage.

Anti-Spin Bracket prevents a RollerDrive from spinning in the frame and damaging its cable. The bracket also provides added security when used on both ends of the RollerDrive in belted applications.

For calibration of HPLC system flow rates, the flow meter measures flows accurately to 1ìl/minute with guaranteed linearity from 0.05 to 25.00 ml/min. Flow rate is measured by volume and is independent of the liquid type up to a viscosity of 10 centipoise.