Industry Products

The DNP OPC Server Suite supports both serial and Ethernet drivers and provides consistent access from DNP 3.0 slave devices to a wide variety of OPC client-enabled applications. DNP is an open protocol used in applications where data integrity over minimal data bandwidth is important. It is primarily used in Power Generation & Distribution related industries but is also common in other Utility applications such as Wastewater Treatment.

The 6.2mm wide PLC relay interface consists of a base terminal block and a pluggable relay. The heavy-duty long life electromechanical relays are rated for AC or DC circuits and are ideal for all types of inductive applications. The pluggable relays can be replaced quickly and economically without having to remove the wiring.

The XPort Direct embedded device gateway is a complete, miniaturized communications subsystem targeted at applications that need to move commands, status and information over IP networks or the Internet, to or from remote devices.

The LRX Low-Power Temperature Transmitter is suitable for oil and gas well-heads and similar installations where line power is not available. With an exceptionally low power consumption of only 3mA, the LRX mounts in remote or infrequently accessed field locations where solar or battery power systems are used.

Model 2200-972-001 Manual Snuf-Bak Horizontal Dispense Valve is for precision shot dispensing of one-component materials horizontally onto an exterior surface or into a product interior. It consists of a standard Snuf-Bak valve nested in a hanging bracket assembly and includes a manually operated electric trigger for operator activation of the dispensing operation.

RCML15 compact optical encoder provides signals for brushless motor commutation as well as incremental position feedback in a low profile (0.350” height) optical encoder.

3 Series Ultra Reflective/Glow-In-The-Dark Numbers and Letters are ideal for clearly identifying electrical utility equipment such as electrical boxes, pedestals, transformers and utility poles. The 3 Series numbers and letters are also optimal for facility identification and general purpose marking such as aisles, equipment, shelving and bins.

Operational Insight Lite, a software tool to acquire, display, and analyze OPC data, is available as a free download to a limited number of beta users in February, then will be free to all in April. It includes the ability to access both real-time and historical data.

Magnum 6K25e Switches are ideal for conditions where the switch must handle a combination of bursty data traffic and high priority streaming traffic, such as security cameras, VoIP, and some PoE devices. It supports up to eight 1-Gb ports.

Enhancements to Network Shutdown Module (NSM) v3.1 software include a user-friendly, web-based interface; iServer virtualization compatibility with the possibility to trigger a graceful shutdown of VMware ESX & Guest OS; IBM Blade Center compatibility for faster installation and management; NAS support with Windows Server 2003 Appliance Edition compatibility; and 64-Bit compatibility for Windows Server 2003 Standard x64 Edition on Xeon 64.

At ATX West Expo in Anaheim, CA, February 13-15, 2007, Kuka will show an application using a KR16 robot and KRC 2 Controller being controlled by a Wii controller & Bluetooth technology. This concept cell was designed to show the next step in the trickle down of robotic technology to consumers from the industrial robot market.

This new addition allows users of all Varian GC or LC/MS systems running MS Workstation to calibrate their data for accurate mass using Cerno’s MassWorks software. MassWorks opens and processes the Varian MS Workstation data from the native Varian SMS and XMS data files. This eliminates the need for importing or exporting MS data to the clipboard or utilizing intermediate exchange formats.

The self-contained intelligent system controls accumulation for up to four conveyor application zones, including any combination of straights, merges or diverts. The Z-card can interface with any Interroll RollerDrive product, including both brushed and brushless solutions, significantly enhancing the control capabilities of virtually any conveyor system.

CADverters offers fast and accurate translation of CAD data between CATIA V5 R17 and Unigraphics NX; I-DEAS; Pro/Engineer; Parasolid; CADDS5; ICEM; and both ProductView and JT visualisation formats.

The new color offerings include dedicated tools for color sorting, color identification and color monitoring. These tools provide reliable color detection in automated inspection and quality assurance applications.

M-Series is available in three sizes, 15”, 17”, and 19”. All are available with 5-wire Analog Resistive touchscreens and NEMA sealed panel mount front panels for installation in harsh environments for many factory automation applications.

Version 8.0 of QI Analyst software has enterprise-level quality management functions that enable plant personnel to manage process variations in a standardized way, minimizing system setup, maintenance and training costs.

Version 5.60 enhancements include updated support for HMI/SCADA, Rockwell PLCs and Schneider Electric’s Concept.

The AIMB-554 supports Intel Core 2 Duo, Intel Core Duo, and Intel Core Solo processors with 400/533/667 MHz FSB. When using the Core 2 Duo T7400 processor, the AIMB-554 provides dual-core processing with a 4MB L2 cache and advanced power management.

The cordset family has a lock-in-place coupling nut that secures the cordset to a quick disconnect sensor and prevents the cordset from detaching – even in high shock and vibration environments. The cordset withstands harsh conditions and aggressive oils and coolants. It has cRUus approval and meets RoHS standards.