Industry Products

The JetWave 2410 2.4GHz IEEE 802.11g/b Wireless Outdoor Access Point complies with IEEE 802.11b/g standards. It links two or more separate networks (typically located in different buildings) to create a single expanded LAN quickly, simply, and economically.

GOT (Graphic Operator Terminal) fanless touch panel computers have an optional rotational WLAN antenna (IEEE 802.11b/ 802.11g) for wireless network connections. By simply plugging in the Mini PCI WLAN card, users have instant access to a wireless LAN. They work in temperatures from -20 to +55ºC and withstand vibration to 1.3G. The super slim design is perfect for limited space environments.

UEI added complete QNX Real Time Operating System (RTOS) support for its PowerDNA series of data acquisition and control cubes. With the new PowerDNA QNX library, QNX developers can take advantage of the deterministic timing afforded by QNX. The Library may be deployed on any host computer running the QNX RTOS and connected to the PowerDNA cube over the Ethernet (10/100baseT).

IP-EP200 Industry Pack I/O modules provide a user-configurable FPGA for high-performance processing of custom logic routines and a digital I/O interface supporting a variety of signal types. It uses the Cyclone II FPGA for processing user-defined algorithms and custom logic routines. With JTAG access to the SignalTap II embedded logic analyzer, engineers can easily monitor internal device operation.

UniSort MXT software has algorithms that optimize merging, induction and sortation, enabling rates well in excess of 300 cartons per minute on sliding shoe sorters. The module is designed for optimal performance in systems using servo-based induction and high-speed merging, although it also works with fixed-speed induction systems and other configurations.

Seats for the Worcester CPT control valve are available in several standard equal-percentage "V" shapes or linear-characteristic slots, as well as other customized characteristics such as dual-angle, noise/cavitation attenuation, and multistage pressure drop. These features permit the CPT valve to be optimized for any specific application, and to be re-configured when system parameters change.

System E1 is equipped with a multilink band which can be easily shortened or lengthened. The band includes six to 15 links depending on the size of the carrier. Each band of links is connected via a flexible snap-open fastener and S-shape motion is possible at any link. The lids of each link open on the same side for easy installation and quick access to cables and hoses.

Retractile cordsets for PROFIBUS-DP networks may be extended up to four times their original retracted length. This makes the cordsets ideal for motion and robotics in automotive applications.

The N5413A DDR2 test application, which runs on Infiniium 54850 and 80000 Series oscilloscopes, provides DDR2 electrical compliance measurements based on the Joint Electronic Device Engineering Council (JEDEC) JESD79-2C DDR2 SDRAM Specifications and INTEL DDR2 667/800 JEDEC Specification Addendum Rev.1.1.

SlotServer ControlLogix/Metasys N2 Interface Module enables a user to interface third party devices utilizing Metasys N2 to the ControlLogix 1756 platform. Metasys N2 is a protocol developed by Johnson Controls and widely used in the building automation industry for energy monitors, HVAC controls, I/O controls, lighting controls, motor controls, and sensors.

C/B 6400 Series of 22,000 Watt, 8U high, 19” wide rack mount DC/DC and AC/DC converter modules provide a high density, space-saving solution for high power applications in industries such as railway controls and communications equipment (onboard and trackside), military applications, fuel cell applications, transportation, telecommunication systems, process control systems, and power stations.

The kit contains four CS Series capacitive sensors, one DS-2100 WiFi display and summing device with wireless connection capability, LoadVUE software for simplifying measurement and calibration tasks using a PC, all the data cables and a 9V power adapter to connect and power the system. It can connect wirelessly to a PC using 802.11b WiFi interface.

Recirculating and planetary roller screws provide solutions for linear-actuation applications requiring accuracy, rapid acceleration, fine leads, and high load capacities. These roller screws can sustain static loads up to 1,000 tons and dynamic loads up to 200 tons, which is three times greater dynamic load capacity than comparably sized ball screws.

TELEMAG TFG lifting columns deliver push or pull force for loads up to 2500N. Rigid aluminum profiles and precision glide pads enable the columns to lift off-center loads without deflection. Stroke lengths up to 400mm can be achieved and a low retracted height accommodates applications where space may be minimal.

the Unit Response Optimizer is available as an embedded advanced control application in the Ovation expert control system. The model-based control solution uses advanced unit analysis and modeling techniques to provide optimal load trajectory and control for improved ramping, startup, unit turndown and overall performance, as well as reduce equipment wear/tear.

ProtoCessors daughter cards that enable OEMs to interface legacy devices to modern open protocol networks without extensive board redesign. Protocols available include Allen Bradley EtherNet/IP, BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, Metasys N2, DNP3, LonWorks and a wide variety of legacy and proprietary protocols.

CU2008 and CU2016 Ethernet switches have a stainless steel/aluminum housing via an integrated DIN rail adapter. The switches relay incoming Ethernet frames to the destination ports. In full duplex mode, they prevent collisions. They can be used universally in automation and office networks.

WLS-TC and WLS-TEMP temperature data acquisiton systems have an RF module, which allows for wireless data transfer. Users can acquire and process temperature data for monitoring and control at distances up to 150 feet indoors, and as much as 2460 feet line-of-sight outdoors.

The CQ28 programmable capacitive sensor detects liquids and bulk materials through non-metallic walls at sensing distances of up to 10 mm. A typical application is fill level detection in tanks, containers or pipe systems for all types of media (liquids, solids and powders). Its IP 68 housing ensures dependable function under almost all operating conditions.

Majorsine inverters offer power ratings of 1KVA or 2KVA in a compact, 2U rackmount configuration. The inverters provide an output voltage of 110/115/120/125VAC from a choice of 24VDC, 48VDC or 125VDC inputs. Applications include DC power systems, SCADA and private network projects, remote power locations, utility substations, and anywhere that utility grade AC power is required.