Industry Products

The TP-Pipe Series provides protection for field mounted transmitters from surges and transients from field cabling. The unit is encased in an ANSI 316 stainless steel housing, threaded for the common conduit entries found on field transmitters. It operates without affecting field transmitter operations and is available for hazardous area use with approvals for intrinsically safe and flameproof operations.

Datalogic Jet PDA and Kyman-Net mobile computer have voice technology support via the vo-CE software suite, powered by Nuance speech engines. This solution enables the mobile computers to be used with any data capture technology, including laser scanner (barcodes, RFID, imaging), data entry via keyboard, and voice.

Power off Magnetic Brakes (PMBs) are available in nine standard frame sizes ranging from 30 to 120, with a torque range from 45 lb-in to 4250 lb-in (5 Nm to 480 Nm), in diameters from 3.30 in. to 11.89 in. (84 mm to 302 mm). Operating voltages of 24 / 90 / 190 VDC are standard, with other voltages available upon request.

The EP811 features an Intel 852GM with ICH*4 chipset. The EP811 SBC supports Intel Pentium M and Intel Celeron M processors running at a 400MHz FSB speed. An optional low voltage Intel Celeron M processor is also available. The EP811 meets the EPIC form factor with PC/104 expansion capability: the board comes with both PC/104 for 16-bit ISA and PCI104 for 32-bit PCI interfaces.

ISaGRAF 5.3 provides a unified development environment for the ISaGRAF installed base. Users will now have the ability to program and support the entire range of ISaGRAF controllers using the same development environment. An ISaGRAF 3 application can be created, compiled, debugged, simulated, downloaded and monitored. No modification to the ISaGRAF 3.x controller is required.

The heavy-duty shaft option for DC25 DuraCoders and H25 resolver transducers carries a 100 lb radial load and a 50 lb axial load rating, delivering a 250% increase over the current radial load rating of 40lb. The 5/8” front shaft is made of stainless steel. The increased radial load ratings enable accurate position readings without slippage of either chains or belts.

The UNO-1019 DIN-Rail PC has a Windows CE 4.2 embedded OS, one CF expansion slot for data buffering and storage, and I/O interfaces, including 2 Ethernet ports, 4 serial ports and 4 digital I/O. It has an operating temperature range of 0~70°C, and starts at $395.

JAM100 Mini Diaphragm Chuck with Spindle Unit is designed for micro machining or micro manufacturing applications. With built-in air cylinder and spindle unit, the total TIR can be under 0.001mm.

FPS200 TRUNKGUARD Fieldbus Power Conditioner provides conditioned power for FOUNDATION Fieldbus H1 networks in general purpose and non-incendive applications. It is available in both simplex (non-redundant) and duplex (redundant) models. The “duplex” configuration provides redundant, load-sharing, hot-swappable power conditioners.

Prodigy-PCI Motion Card for multi-axis, high-performance control is available in 1, 2, 3, and 4-axis versions. The card provides advanced motion control features including trajectory generation, servo loop closure, quadrature signal input, motor output signal generation, performance trace, on-the-fly changes and commutation. Motor type can be software-selected on a per-axis basis, and includes DC brush, brushless DC, step, and microstepping.

MP85A FASTpress evaluates and transmits process parameters to the production data server. Data is stored within the press and can be transmitted via an Ethernet interface to a production data server. Component names can be transmitted individually, while specific process results or measurement curves can be selected for saving.

UTS connectors are fitted with seals to provide sealing in accordance with IP68 & IP69K standards. This means that the connectors are able to withstand water immersion at a depth of 10 m and high-pressure cleaning @ 140 bars. The seal is dynamic in that it is maintained even in the event of the cable being subjected to a pulling or bending motion.

EDS16PR and EDS32PR high density device servers can quickly and securely connect, access and monitor up to 32 serial devices over existing management or production networks from a single 1U high/rack mount data center ready unit. These platforms provide enterprise-grade security and intelligent web services for attached devices, including XML, Really Simple Syndication (RSS), and e-mail.

The B&APC620 and Panel PC industrial PCs are available with optional IP65 protection and a DVD-RW drive that can read and write all standard DVD formats. This allows for the continuously increasing need for high-capacity memory media and accommodates the trend of recording more production and quality data.

The Memor pocket-sized Windows-powered mobile computer is an extremely compact, lightweight, versatile and robust device that combines integrated bar code reading and wireless communication capabilities. It is suitable for light industrial operations such as warehouse management, inventory, picking, shipping, receiving, etc.

With the new CP69xx "Economy" Control Panels from Beckhoff Automation, high quality HMI hardware is improved with enhanced features and reduced cost from 20 percent to 40 percent when compared to earlier designs. The panel’s innovative DVI/USB extension allows devices to be installed at a distance of up to 50 m as standard – improving upon conventional DVI/USB connections by a factor of 10.

MOVIFIT Field Integrated Technology combines the advantages of decentralized control with drive and communication technologies for automotive, food and beverage, logistics and other sophisticated material handling applications. Preconfigured control routines for both horizontal and vertical conveyor applications provide ready-to-use functions that simplify programming and start-up.

JACKPAC modules can be installed directly on the machine, in the production plant, conveyor system, or within a process, without requiring additional enclosure. The modules include Form C Relay Output, Pulse Stretching Modules, Over-Voltage Protection Modules, and Signal Isolators.

OC Robotics has built and tested a demonstration snake-arm robot capable of sealing, swaging and inspection within aircraft wings. The snake-arm robot acts as a flexible extension for a Kuka industrial robot and is fed through the access hole. The snake-arm can follow a path into the wing box using the Kuka as a delivery tool.

Armored M12 eurofast cordsets provide protection against abrasion, cuts, water, oil and impact, and are excellent for use in automotive, stamping plants and welding environments. The cordsets use rugged PVC-jacketed cable with interlocking aluminum armor that is ITC/PLTC (instrumentation tray cable) rated and meet Open Wiring specifications, allowing their use in place of conduit.