Industry Products

Available in 1.54, 2.13, 2.66, 4.20 and 4.37-inch models, these active-matrix displays include an internal timing controller (Tcon), which minimizes the amount of programming and peripheral circuitry required.

The posichron PCFP25 profile was designed especially to suite limited space applications such as crane outriggers.

At 1.5 x 1 x 0.6 inches (38 x 25 x 16 mm) in size, the footprint of the drive is approximately the same as two standard postage stamps. In other words, four of these drives can fit on a standard business card.

This Ethernet interface is a joint development of HIROSE and HARTING. The adapter allows the DSX Series to connect to cabling systems employing the ix Industrial connector for the purposes of pre-startup verification and troubleshooting.

Mencom offers a range of interconnection solutions for the railway and mass transit industry.

With a contact rating up to 0.1 amp as first release, the products deliver a repeatable action, making them suitable for detection applications, such as temperature, and pressure switching in motorized equipment, sump pumps thermostatic controls and air conditioners.

Safety laser scanners enable humans and machines to work safely alongside one another in industrial environments by reliably protecting stationary and mobile applications.

These M12 interconnects were designed for factory automation, industrial control, test equipment, I/O connectivity, sensors and actuators, or any connectivity application where a screw down interface is necessary.

The certification by third party TÜV Rheinland confirms that the controller meets the global standard’s cybersecurity requirements. The controller achieved compliance with the addition of security features to its firmware.

The BB-400 NeuronEdge combines Brainboxes IO and serial connectivity with a range of network connections to allow data to flow to the application of choice. The design uses a Raspberry Pi Compute module and an Arduino to provide edge processing.

The FAC-S Analog Output Sensor and FAC-R Frequency to Analog Converter also offer Bluetooth connectivity and analog output options when interfacing with AW-Lake Flow Meters and other instrumentation.

PMPlanR is a standalone Preventative Maintenance Planning Software Application. PMPlanR allows users to “Build Your Plant”. Each Plant consists of Areas, Machines and Assets.

Devices featuring this service are designed to ensure compatibility with Microsoft Azure IoT, and make deployment of AIoT and cloud-connected networks easier to set up and use.

The software delivers production information from any FactoryTalk application to operators wherever they are in a facility. Operators can customize the way information is delivered to any device (fixed or mobile), user or location.

Geared towards end users in crane and material handling applications, the regenerated energy from one VFD in a lift application is used by another VFD to drive other motors in the system.

The T840 offers a display and an integrated viewfinder to help electrical utility, plant managers, and other thermography professionals find and diagnose failing components in any lighting conditions.

ADLINK’s 1U Edge Computing platform MECS-6110 provides all I/O front access, dust prevention, operation temperature for supports of telecom feature, installation environment restrictions, capability of system architecture evolution, and dual full-height full-length (FHFL) PCIe expansion slots reserved for access to acceleration hardware (GPU/FGPA).

The design of the CRASH-CAL system integrates MB’s own Model CAL25AB air bearing shaker, together with its Model 407-8X multi-channel signal conditioner; MB 500VI power amplifier; and Win475 CRASH-CAL software, facilitating the simultaneous calibrations of up to eight piezoresistive accelerometers

The number of cycles of certain components during production are determined via RFID, thus creating an overview of the current plant utilization. The cloud-based RFID solution makes it possible to monitor a range of production equipment that requires maintenance.

The AIPW pre-scans the root opening (gap) using a 2D laser, then uses the data to generate the robot path and welding parameters. Gap variations are compensated for with changes in oscillation, torch position, travel speed and welding conditions. Th