Industry Products

PAN-TY high temperature and chemical resistant cable tie works in applications where extreme temperatures from -75ºF to 500ºF or harsh chemical environments are the norm. Ties are made from Polyetheretherketone (PEEK), a material that provides excellent resistance to most harsh organic and inorganic chemicals.

Proficy HMI/SCADA iFIX 4.0 is now available in German, French, Polish and Russian languages, in additon to Chinese, Japanese and English.

The SWIMS (Simple Wireless Information Management System) programmable data collection and satellite telemetry platform is suitable for remote and offsite monitoring. The unit features multiple analog, digital, RS232 serial, pulse, and frequency inputs. An optional power pack adds a 10 watt solar panel and sealed battery with digital charge regulator for a fully self contained system.

Engineered with a Micro Electro Mechanical System (MEMS) based thermal sensor, the 4800 Series delivers fast response to changes in gas flow rate. The MEMS sensor achieves extremely fast response rates compared to typical thermal technologies by allowing the gas to flow directly across the sensor. The compact sensor also enables a reduction in size compared to traditional thermal mass flow devices.

Personal Solution-Pac power management software for Microsoft Vista can be downloaded from MGE's Web site. Personal Solution-Pac gives users information on important parameters such as power consumption and remaining battery life of their UPS. It includes an intuitive screen that displays remaining battery backup time available.

The SPA2 alarm trips accept input signals from transmitters, temperature sensors, resistance and potentiometer devices, and direct millivolt sources. They provide on/off control, warn of trouble, and provide for emergency shutdown by sending up to four relay outputs when a monitored process signal falls outside a user-selectable high/or low limit. The SPA2 is FM-approved for use in hazardous locations.

EDS-408A/405A Series switches are entry-level 8- and 5-port managed Ethernet switches designed especially for industrial applications. The switches support many different management functions, such as Turbo Ring, ring coupling, VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay.

EDS-208 is an entry-level industrial 8-port Ethernet switch that provides a low-cost and reliable solution for your industrial Ethernet connections. Rugged features include IP30 protection, DIN-Rail mounting ability, and redundant DC power inputs, making EDS-208 reliable and suitable for industrial Ethernet applications.

Tracopower TSP Series DIN-rail power supplies have a rugged metal case, shock and vibration proof construction, and optional ATEX certification for Class l, Div.2 applications in hazardous locations. 14 standard models are available with regulated, adjustable output voltages of 12, 24 and 48VDC, with ratings up to 25A.

The boards offer 8 analog output channels with maximum update rates of 100 kHz per channel (800 kHz per board), 1500 Volts of isolation, one D/A per channel (allows simultaneous D/A updates), double buffering, low glitch outputs, and three utility digital I/O channels. The boards work with the company's PowerDNA data acquisition system.

Business To Manufacturing Markup Language (B2MML) v04 Release Candidate 2 schemas and documentation are now available on the WBF XML Working Group's internal website. This enhancement of B2MML includes support for ISA-95 Part 5 Transactions, OAGIS messages and UN/CEFACT core components while still maintaining backward compatibility to V0300. Documents are available for review until February 9, 2007.

The AR-B1892 is powered by the Intel Core 2 Duo, Core Duo, as well as Celeron M processors. Integrated with the Trustee Platform Module (TPM), it also provides excellent software security.

Medalist SP50 Series 3 enables manufacturers of printed circuit board assemblies to slash inspection time in half. Links to downstream repair stations and statistical process control tools allow better control over collected data.

the High Performance PLC has a cycle time of 25 µsec per 1,000 lines of STL. It has a 32-bit RISC CPU that runs at 667 MHz, 64 MB Flash memory, and five fieldbus module interfaces. The ProMaster Engineering Framework is used to configure the PLC system, the network components, or individual machine units.

MOXA’S Terminal Server family, including the new NPort 6000 Series, offer users reliable and secure serial to ethernet connectivity. consists of 8-port and 16-port servers to connect async devices, such as terminals, modems, data switches, mainframe computers, and POS devices, to hosts connected to a 10/100 Mbps TCP/IP Ethernet.

Featuring 4 RS-232/422/485 serial ports, dual Ethernet ports, 4 digital input channels, 4 digital output channels, a PCMCIA cardbus and SD socket in a compact, IP30 protected, industrial-strength rugged chassis. The DIN-Rail vertical form factor makes a cost-effective solution and is the best choice of front-end embedded controller for industrial applications.

Improve system efficiency via real-time data acquisition. No programming! Hassle-free Click&Go™ logic control. Unique LCD Display Module for on-site configuration. Independent Configuration for Multi-functional DI and DO points.

With NTEP approval, the BW500 in conjunction with the NTEP-Approved Milltronics MMI belt scale, can now be used in custody transfer applications in the U.S.

BT100 Series Rollerdrive has an extended operating life of up to 6000 hours due to improvements in the efficiency of the gearing and the quality of the overall brush construction. The High Performance Brush Type RollerDrive (HPBT) provides a cost-effective motorized driven roller solution for light or intermittent duty postal, warehouse or manufacturing material handling applications.

The UNO-2171 includes two RS-232 ports, two RS-232/422/485 ports, two 10/100 Ethernet ports, two USB 2.0 ports, PC/104+ expansion and an operating temperature range of -4 to 149°F. It supports Windows XP, Windows XP Embedded OS, and Windows CE 5.0. Prices start at $1,475.

MARKINGenius uses thermal transfer technology to produce identification and labeling media for wire marking, terminal blocks, cables, tubing, panel building components and equipment of all types. It prints True Type fonts in black and over 4,000 other colors, plus Clipart images, drawings and bitmaps down to very small dimensions.

JetNet 5010G industrial Gigabit Managed switch has three combo Gigabit ports and 7-port 10/100 Fast Ethernet, with a failover time of less than 30 milliseconds. Each Gigabit port accommodates 1000Base-SX, 1000Base-LX or 100Base-FX connectivity. The switch supports up to twenty units connected in a Gigabit Fiber Ring topology.

National Instruments released six USB modules for high-speed and low-speed/fault-tolerant Controller Area Network (CAN) and Local Interconnect Network (LIN) monitoring, logging and testing,

The industrial grade eBOX611 integrates a high performance EPIC form factor SBC which supports both Intel Pentium M and Intel Celeron M PGA or BGA processors, has an anti-vibration 2.5 in. hard drive, and is suitable for mobile DVR (Digital Video Recorder) and telematics applications.

The GE680 runs 200+ frames per second at VGA resolution and even faster at lower resolutions -- up to 1500 fps when using a 25x25 region-of-interest. The camera complies with the AIA GigE Vision interface standard making it easy to integrate into real world applications, such as machine vision, industrial inspection, test and measurement, and motion capture.

Meet UL98 standards with 600 VAC/250 VDC heavy-duty fusible/non-fusible disconnects. SIRCO switches, starting at $57, are rated to 800 amps; switches up to 400 amps have visible blade contacts. FUSERBLOC fusible disconnects (double break contacts per pole), starting at $85, accept class CC or J fuses up to 200 amps.

The latest release offers 30% faster printing speed, with additional upgrades that increase functionality and efficiency. This portable label printer provides bold, easy to read text from 0.08” to 1.7”, bar coding capabilities, 12 resident operating languages, alpha-numeric sequencing, and PC compatibility.

Optimized for commercial fan and pump applications, PowerFlex 400 AC drives feature built-in network connectivity for integration into building automation systems, as well as flexible packaging options for easy installation and startup.

Panasonic has embedded BIOS support for Absolute's Computrace-enabled security solutions with the CF-19 and CF-30 rugged notebooks and the CF-T5 business-rugged tablet alternative. With Computrace, customers can now securely track their Toughbooks in any mobile or remote environment and, if lost or stolen, can locate and recover them, as well as remotely delete sensitive data.

CAT electro-mechanical linear actuators enable cost-effective and easy customization due to their modular design, allowing for use of standard internal and external components (such as motors, screws, and attachments). This satisfies a wide variety of food service, medical, and industrial application requirements quickly and reliably without a need for specially engineered parts or assemblies.

Pile Driver inductive proximity sensors are available in a Remote Amplifier version. These sensors can operate in temperatures ranging from -25 to 70°C. They have an 8mm diameter housing, offer a nominal sensing range of 1.5mm and can be wired either sinking or sourcing. Just 23mm in length, these shielded sensors are fully flush mountable and are suited for space restricted applications in harsh environments such as those found in the welding and metal forming industries, among others.

Meeting UL98 standards, the SIRCO and FUSERBLOC series are designed with the latest disconnect technology available, “make and break” power circuits under load, and are UL, CSA, CE and IEC rated.

the Rotary Indexer Product Set allows OEMs to build a machine faster, and allows end-users to assemble small parts precisely with reduced scrap and significantly improved yield. The programmable direct drive solution provides precise, repeatable and flexible electronic indexing in a compact package.

Able to meet global standards IEC 60439-1 and IEC 60529, CENTERLINE 2500 motor control center offers real-time MCC diagnostics and monitoring over DeviceNet, ControlNet or Ethernet, which gives users access to critical motor status information. Built-in DeviceNet with IntelliCENTER software eases information sharing for predictive maintenance, quick troubleshooting and safety.

These high temperature sensors operate at up to 250° C (482° F). These devices feature a separate sensing head assembly and electronic amplifier assembly to facilitate quick, cost-effective installation and maintenance.

The audit trail automatically tracks engineering changes made to the Ovation system, providing utilities with a better way to manage system security, and troubleshoot and quickly identify the root cause of abnormal conditions that can impact operational performance or result in loss of generation.

Husky Series Industrial Managed Gigabit Ethernet Switch now has small form-factor pluggable (SFP) ports. The SFP fiber slot provides users the flexibility to insert different fiber modules, either multi-mode or single-mode, with various distances. Husky Gigabit switches can automatically detect the Gigabit cable connections priority for each Gigabit port.

The MA2 miniature absolute magnetic shaft encoder provides 1024 unique positions per 360° of shaft rotation. The miniature encoder is less than 5/8 in. in diameter and just over one inch in length, including the shaft and bushing. Its magnetic single chip sensing technology makes it ideal for applications in harsh environments.

VX Series Vacuum Suction Cup with adjustable threaded fitting mounts let vacuum suction cups grip at various heights. Load Leveling Extensions are threaded on the inside and outside to accommodate a wide variety of fittings and feature oversize nuts and lock washers for secure operation in high speed automation equipment. Easy to adjust, they allow bellows-style vacuum cups to grip at various heights from the same installation plate or manifold.

Wet-Mix Process Systems provide users with a finished product that is homogeneous, has repeatable viscosity and dispersion down to one micron, and is totally consistent from batch-to-batch. It has a colloid mill and positive displacement feed pump. Systems can be designed for handling viscous materials from 1,000 CPS and up with flow rates from 0.5 up to 300 GPM, depending upon the application.

The PCM-3240 stepping/pulse-type servo motor control card starts at $845. The card's intelligent NOVA MCX341-motion ASIC provides a variety of motion control functions, such as 2/3-axis linear interpolation, 2-axis circular interpolation, and T/S-curve acceleration/deceleration rate. The PCM-3240 performs these functions without requiring any main CPU processing. The PCM-3240 fits onto a standard PC/104 board.

Enhancements in Maple 11 a smart document interface, strong computation engine, and connectivity capabilities. The improved computation engine includes new mathematics, user-level multithreaded computations and a certified polynomial real root finder.

The USB-6221 and USB-6229 DAQ devices provide up to 32 analog inputs with a 250 kS/s single-channel sampling rate. Both have signal streaming technology, which uses the bandwidth and performance of Hi-Speed USB technology to allow bidirectional high-speed transfer of data between the USB device and a computer.

The Allen Bradley 1799 Embedded I/O product line for conveyor applications now includes the On Machine solution, which combines I/O circuits, a power supply and network adapters into a single IP00 module that provides local control of outputs using DeviceLogix technology. The built-in DeviceNet communications links the machine to the controller for increased speed and efficiency.

BKS Wire Draw Encoders provide high resolution (to 0.05 mm) position or distance information for linear measurement paths up to 5 m at speeds up to 3.5 m/sec, even under difficult mounting positions. Applications include presses, punching and injection machines, storage technology, wood and sheet metal processing machines, and machinery construction and medical technology.

The TPC-2012 works with the LabVIEW 8.20 Touch Panel Module, giving control and design engineers an option for deploying the LabVIEW graphical development environment on Windows CE HMI devices.

Slim Line (SL Series) Industrial Ethernet Unmanaged Switches are available in five (SL-5ES), eight (SL-8ES) and nine port (SL-9ES) models. The compact and slim packaging design allows them to fit into the tightest DIN rail applications. The switches are CUL (UL/CSA), CE, FCC, ISO 9001, and RoHS/WEEE rated.

Direct Current (DC) power supplies include four adjustable voltage models: a 25W 5VDC 5A unit, a 48W 12VDC 4A unit, a 48W 24VDC 2A unit, and a 48W 48VDC 1A unit. All units have regulatory approvals, including UL 508, cRUus 60950, GSA, and CE.

The fiber interface extends the maximum distance between a PowerDNA I/O Cube and its host computer from the 100 meter Ethernet/100BASE-T limitation to 2 kilometers. The 2 km limitation reflects the use of standard, off-the-shelf multimode fiber.

LabSoft LIMS NR tool manages noncompliance records and provides a method to focus on the root cause of an NR and determine the reasons, circumstances and responsible parties.

Brooks / MSP Model 2820 Turbo-Vaporizer System for fine droplet, Direct Liquid Injection (DLI) vaporization generates high purity vapor from liquid precursors required for thin film deposition. Applications include semiconductor films, chemical research, catalyst production, fiber optics, optical coatings, industrial coatings and fuel cells.

RFID forklift installation system allows forklift drivers to use RFID and other data collection technologies to gather complete real-time inventory data efficiently and safely without leaving their vehicle. The Adaptable Load Backrest and Antenna Cell system fits almost all forklifts on the market.

Enhancements to the ZB2430 “ZigBee Your Way” transceiver line include increased power and receive sensitivity, and line-of-sight range up to three miles. A low-cost version is available for under $10.

DualHead 2Go Digital Edition external multi-display upgrade device connects to the VGA output of compatible notebook or desktop computers and expands the desktop across two digital displays. It supports high resolution panels, offering a stretched desktop of up to 3840x1200 (or dual 1920x1200) across two displays. it is ideal for adding an extra display to a closed, already validated, mission-critical system or to computers with no available expansion slots.

GENESIS32 and BizViz Manufacturing Intelligence software suite are ready for the new Microsoft Vista operating system. Windows Vista increases productivity and drives business success by improving security and compliance, optimizing desktop infrastructure, finding and making better use of information and enabling the mobile workforce.

IndraDrive is a complete drive, motion control, and logic control mounted directly on the motor. It uses the motor casing surface as the heat sink. This reduces the total build space required by 50% when compared to the copmpany's traditional servo drives.

SPD Series 480W model offers 24Vdc (20 A) and 48Vdc (10 A) outputs; short circuit, overvoltage, and overload protection; “Power OK” and “Low Output Voltage” LEDs; and a relay output for “power ready.” Power Factor Correction and Parallel Connection functions are also standard features.

SEC-AC-SMLC is a fully-integrated control solution providing hardware and software building blocks that are engineered to easily plug together and work as a system. This allows engineers to focus on solving their application instead of integrating control components.

The automated replenishment system uses mini-load cranes to reduce the high manual labor cost of split-case picking by providing continuous, automated, demand-based replenishment to increase order fulfillment speed and accuracy.

TS400 and TS500 platinum resistance temperature detectors (RTDs) are suitable for nearly all factory and process automation applications. The sensors may be mounted directly or remotely, and sense a temperature range of -50 to 932 F.

SRL Oil-free Scroll Air Compressors conserve natural resources and eliminate environmental emissions (No lubricants and/or grease to manage.) Its multi-stage cooling provides stability of discharge air temperature.

Enhancements in Lattix LDM 3.0 include its Dependency Model approach, which extends DSM with architecture rules, to enable a new way to visualize and manage the architecture of database systems. LDM enables managers, architects and developers to visualize, specify and maintain the architecture of a complex enterprise software system.

The GOT-3150T 15” TFT fanless touch panel computer has an ultra low power consumption processor that works over a temperature range of -20°C to + 55°C and handles vibration up to 2G.

TERMEX intrinsically safe text and graphic panels have a monochrome LC display for PLC and computer-based operation and monitoring of machines and processes located in hazardous areas. These panels are ATEX certified for Zone 1 hazardous area use, with North American approvals pending.

ORBexpress RT now supports LynxOS-SE real-time operating system (RTOS). Developers can use both to build safe and secure military and aerospace systems. ORBexpress is based on the Real-time Common Object Request Broker Architecture (CORBA) standard that enables real-time and embedded devices in heterogeneous environments to communicate seamlessly. LynxOS-SE is POSIX and ARINC 653-1 compliant, highly desired in military and avionics applications.

The PCI-1739U 48-channel digital I/O universal PCI card for both 3.3 V and 5 V PCI bus signaling starts at $195. It uses Opto-22 compatible 50-pin connectors for interfacing to many signal conditioning and termination options.

Upgrades include a BFI (Blown Fuse Indicator) circuit, which uses a high efficiency LED that emits a bright signal throughout a complete voltage range. Because of the wide voltage range of the BFI circuits, 16 part numbers now make up what was once represented by 40. This consolidation translates to fewer items end users will have to specify due to various circuits.

The 4700 Series has an Intel M mobile processor that requires about half the wattage of most industrial PCs. Because the reduced power usage also results in less heat output, 4700 Series PCs are ideal for factory automation applications requiring NEMA sealed enclosures. The 4700 Series ships standard with a 1.3GHz Intel Celeron M processor (512K cache, 400MHz bus); 512MB DRAM, CD-ROM and WindowsXP.

Lead screw, linear rail, spline shaft and ScrewRail actuator assemblies are available with Kerkote TFE coating, which reduces friction and extends the life of assemblies used in motion control applications in a variety of industries. Since it is a dry lubricant, Kerkote will not become dry and paste-like, and does not attract dirt or debris.

The EDS-516A 16-port managed Ethernet switch provides high-end and secure industrial Ethernet applications. It supports Quality of Service (QoS), IEEE802.1D-1998 GMRP and IGMP Snooping, and VLAN technology, which can be used to segment a network without being restricted by physical connections,

Model 2600-060 No-Drip fluid valve for precise on-off flow control of medium- to high-viscosity fluid materials can also be used as a dispense valve for viscous materials such as acrylic, epoxy, pvc, silicone, urethane and lubricants. The pneumatically actuated valve is rated for 5,000 PSI. It has an anti-abrasive, hard-coated needle shaft and wear-resistant fluid seals to maximize valve life.

The JRBS line of spur blocks for FOUNDATION fieldbus and PROFIBUS PA provides the convenience of DIN-rail mounting in a rugged IP 20 design. All JRBS products contain a selector switch for segment termination, and allow the segment to be continued for distribution of instruments in other locations with no additional accessories required.

Free CD contains lean solutions for packaging OEMs, including lean manufacturing toolbox and software tools. The kit includes a video presentation of manual production systems along with practical pointers on material flow, people flow, and information flow. Included on the CD is the guidebook “Lean Manufacturing: Principles, Tools, and Methods.”

Battery-operated and cord-free, TH800 Chart Recorder is easily moved from place to place during short-term site monitoring and testing. It is ideal for industrial facility managers who are troubleshooting hot spots and other problems with temperature and humidity conditions.

Available in DC and AC/DC models, Series 28 Sensors feature a rugged IP67 housing and highly visible LEDs for visual status indication. They offer advanced cross-talk protection, are immune to ambient light, and are available with visible red, infrared and laser light source types.

The iPC-I XC16/PCIe works in CAN applications, such as industrial control or automotive test stands. The interface supports PCI Express, has an on-board 16 bit microcontroller, and provides filtering, pre-processing, low latency, time triggered transmission or high precision time-stamping of CAN messages.

The CAN-CR200 and CANCR220 CAN repeaters allow setting up star or tree topologies, have automatic decoupling of defect segments, and provide galvanic decoupling of the CAN lines against each other and against the power supply.

ServoClass Couplings are made with 304 stainless steel disc packs and 7075-T6 aluminum hubs and center members and have higher torsional stiffness than previous models. Applications include medical systems such as scanners, DNA analyzers and X-ray equipment requiring consistent, precision linear positioning.

InnerDrive Belt Conveyors have a 24vdc motor placed inside a low profile conveyor frame, offering a significant space savings over traditional conveyor drive packages. With a frame height of only 2.54”, this design can fit tight spaces that standard conveyors cannot. The integrated motor makes InnerDrive Conveyors maintenance-free, eliminating the need to lubricate bearings or drive packages.

Engineered to satisfy the price and performance needs of the OEM market, the ST5-S offers advanced features to obtain absolute maximum performance benefits from a stepper motor. the ST5-S can be controlled by a step and direction input, or by a host controller via serial communications.

DiProPAC 32 die protection module for the SmartPAC 2 press automation control provides inputs for up to thirty-two sensors. An 8-sensor module is also available. It generates a detailed message whenever a sensor fault occurs, providing the name of the sensor, the sensor type, the nature of the fault (early, late, missed, etc.), and the angle at which the fault occurred.

SR61 is available with a choice of scanning options: standard range area imager, MEMS laser or linear scanning. The SR61 allows companies to standardize on a single form factor and choose the scanning technology that best suits their application needs, from low-light environments to highly dense or difficult to read barcodes.

This one-window test tool requires little to no training so technicians and system integrators can use their time more effectively. A simple explanation on how Modbus works on their website is a handy reference that includes examples of the various commands and replies.

SeaDAC PLC-16H digital I/O module combines high-current Form C outputs and optically isolated inputs. It has eight SPDT high-current Form C relays that can directly switch up to 6A loads at 250VAC and 100VDC. Additionally, eight non-polarized inputs can monitor 5-30VDC and provide optical isolation to protect the host computer and other sensitive equipment from voltage transients.

Flexi safety-rated controller provides configurable logic without using any software. Users can realize the benefits of integrated safety logic without using a computer to program the device, saving time and simplifying setup. Logic is implemented with rotary switches on the front of each module. Logical combinations with multiple modules are easily set based on how the modules are combined.

The mini-IPm PLUS has Ethernet, up to 4 serial ports and a built-in mix of 26 discrete and analog I/O. It is pre-loaded with open-source Linux and the IPm firmware which offers automation, control and data acquisition capabilities. For utility applications, IPm+ also includes pre-loaded software for AGA gas flow calculations and DNP-3 time stamped communications.

The new Series NL1 mini air preparation units from Rexroth are fully modular and customizable. The units are easy to assemble (without tools), and easy to install and maintain. Series NL1 features transparent polycarbonate and solid metal bowls, and a choice of 1/8” or ¼” NPT ports. Series NL1 complements the Series AS2 and AS3 (1/4 to ½ ports) family of FRLs.

Q45S provides continuous monitoring of H2S (hydrogen sulphide) in wet conditions. A flexible monitoring capability allows measurements to be made either at the inlet to scrubber systems, where concentrations can run as high as 200 PPM, or at the outlet, where concentrations are ideally below 0.5 PPM. Special sensor configurations are also available for either duct insertion or flowcell use.

The encoder module incorporates a lensed LED light source and monolithic photodetector array with signal shaping electronics to produce the two channel bounceless TTL outputs. The internal monolithic electronic module converts the real-time position, speed, and direction into TTL compatible outputs.

The xCoupler module snaps into a ControlLogix PAC (programmable automation controller) from Rockwell Automation and provides bi-directional data translation between plant floor devices and SQL Server 2005 databases connected to the module via Ethernet. The module can be set up to configure specific plant floor devices, such as robots, sensors, bar code scanners and controls, with a database to develop commands, reports, alerts and other instructions.

The 1450 heavy-duty conveyor roller for the airport baggage handling industry is available in 3.5” x 0.120” steel tube, polyamide housings with ABEC 1 6205ZZ precision ground chrome steel ball bearings. Shaft options include a 0.687” hex shaft and a robust 20mm diameter version that is end drilled and tapped for bolted construction.

System 7000 acquires, reduces, and presents data from strain gages and related sensors for stress analysis testing. Users can intermix strain gages, strain-gage-based transducers, thermocouples, and other sensors including those with high-level voltage outputs in groups of eight by choosing the appropriate sensor card for up to 128 channels in a 4U-height, 19-inch, rack-mountable scanner.

These miniature, lightweight sensors consist of foil strain gages adhesively bonded to flat substrates made of metal, polymer, or composites. Hybrid sensors can be attached via mounting holes with screws, via spot welding, or via clamping. This eliminates the need for adhesive bonding by end users. The hybrid sensors are also available with pre-attached lead wires and connectors to eliminate soldering.

Lockout PRO 3.0 allows companies to create and implement a complete, OSHA 1910.0147 compliant hazardous energy control lockout program. The program features easy-to-use templates, plus access to a database of standard graphics, terms, and information. The new version features several enhancements designed to make it even easier to create and maintain a complete hazardous energy control policy.

Husky 10-port Managed Industrial Gigabit Ethernet Switches make migration to and deployment of Gigabit Ethernet easy. HMG-825, HMG-826 and HMG-828 can be remotely configured by a web browser, SNMP, Telnet, CLI, or a menu-driven management system.

The XMT series of mini photoelectric sensors are available in eleven different models including diffuse reflective, focalized, polarized retro reflective, retro reflective for transparent and through beam. The sensing distance range is from 0.2 cm up to 6 meters depending on the model selected.

The Alarm Analysis package examines alarm data collected by the Ovation historian, providing the user with information necessary to minimize unnecessary alarms. The package allows users to sort, filter and analyze alarm information by a number of variables, including point names, descriptions, plant areas, time ranges, and types of alarm. Data can also be summarized according to alarm display, alarm priority, alarm rate and frequency.

DSP Oilfree rotary screw air compressor products are part of the Air Technology Group, which is based in Charlotte, NC. The facility will be the center for all Air Technology Group business operations, warehousing, and training for Distribution Partners and OEMs.

The JetWave 2410 2.4GHz IEEE 802.11g/b Wireless Outdoor Access Point complies with IEEE 802.11b/g standards. It links two or more separate networks (typically located in different buildings) to create a single expanded LAN quickly, simply, and economically.

GOT (Graphic Operator Terminal) fanless touch panel computers have an optional rotational WLAN antenna (IEEE 802.11b/ 802.11g) for wireless network connections. By simply plugging in the Mini PCI WLAN card, users have instant access to a wireless LAN. They work in temperatures from -20 to +55ºC and withstand vibration to 1.3G. The super slim design is perfect for limited space environments.

UEI added complete QNX Real Time Operating System (RTOS) support for its PowerDNA series of data acquisition and control cubes. With the new PowerDNA QNX library, QNX developers can take advantage of the deterministic timing afforded by QNX. The Library may be deployed on any host computer running the QNX RTOS and connected to the PowerDNA cube over the Ethernet (10/100baseT).

IP-EP200 Industry Pack I/O modules provide a user-configurable FPGA for high-performance processing of custom logic routines and a digital I/O interface supporting a variety of signal types. It uses the Cyclone II FPGA for processing user-defined algorithms and custom logic routines. With JTAG access to the SignalTap II embedded logic analyzer, engineers can easily monitor internal device operation.

UniSort MXT software has algorithms that optimize merging, induction and sortation, enabling rates well in excess of 300 cartons per minute on sliding shoe sorters. The module is designed for optimal performance in systems using servo-based induction and high-speed merging, although it also works with fixed-speed induction systems and other configurations.

Seats for the Worcester CPT control valve are available in several standard equal-percentage "V" shapes or linear-characteristic slots, as well as other customized characteristics such as dual-angle, noise/cavitation attenuation, and multistage pressure drop. These features permit the CPT valve to be optimized for any specific application, and to be re-configured when system parameters change.

System E1 is equipped with a multilink band which can be easily shortened or lengthened. The band includes six to 15 links depending on the size of the carrier. Each band of links is connected via a flexible snap-open fastener and S-shape motion is possible at any link. The lids of each link open on the same side for easy installation and quick access to cables and hoses.

Retractile cordsets for PROFIBUS-DP networks may be extended up to four times their original retracted length. This makes the cordsets ideal for motion and robotics in automotive applications.

The N5413A DDR2 test application, which runs on Infiniium 54850 and 80000 Series oscilloscopes, provides DDR2 electrical compliance measurements based on the Joint Electronic Device Engineering Council (JEDEC) JESD79-2C DDR2 SDRAM Specifications and INTEL DDR2 667/800 JEDEC Specification Addendum Rev.1.1.

SlotServer ControlLogix/Metasys N2 Interface Module enables a user to interface third party devices utilizing Metasys N2 to the ControlLogix 1756 platform. Metasys N2 is a protocol developed by Johnson Controls and widely used in the building automation industry for energy monitors, HVAC controls, I/O controls, lighting controls, motor controls, and sensors.

C/B 6400 Series of 22,000 Watt, 8U high, 19” wide rack mount DC/DC and AC/DC converter modules provide a high density, space-saving solution for high power applications in industries such as railway controls and communications equipment (onboard and trackside), military applications, fuel cell applications, transportation, telecommunication systems, process control systems, and power stations.

The kit contains four CS Series capacitive sensors, one DS-2100 WiFi display and summing device with wireless connection capability, LoadVUE software for simplifying measurement and calibration tasks using a PC, all the data cables and a 9V power adapter to connect and power the system. It can connect wirelessly to a PC using 802.11b WiFi interface.

Recirculating and planetary roller screws provide solutions for linear-actuation applications requiring accuracy, rapid acceleration, fine leads, and high load capacities. These roller screws can sustain static loads up to 1,000 tons and dynamic loads up to 200 tons, which is three times greater dynamic load capacity than comparably sized ball screws.

TELEMAG TFG lifting columns deliver push or pull force for loads up to 2500N. Rigid aluminum profiles and precision glide pads enable the columns to lift off-center loads without deflection. Stroke lengths up to 400mm can be achieved and a low retracted height accommodates applications where space may be minimal.

the Unit Response Optimizer is available as an embedded advanced control application in the Ovation expert control system. The model-based control solution uses advanced unit analysis and modeling techniques to provide optimal load trajectory and control for improved ramping, startup, unit turndown and overall performance, as well as reduce equipment wear/tear.

ProtoCessors daughter cards that enable OEMs to interface legacy devices to modern open protocol networks without extensive board redesign. Protocols available include Allen Bradley EtherNet/IP, BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, Metasys N2, DNP3, LonWorks and a wide variety of legacy and proprietary protocols.

CU2008 and CU2016 Ethernet switches have a stainless steel/aluminum housing via an integrated DIN rail adapter. The switches relay incoming Ethernet frames to the destination ports. In full duplex mode, they prevent collisions. They can be used universally in automation and office networks.

WLS-TC and WLS-TEMP temperature data acquisiton systems have an RF module, which allows for wireless data transfer. Users can acquire and process temperature data for monitoring and control at distances up to 150 feet indoors, and as much as 2460 feet line-of-sight outdoors.

The CQ28 programmable capacitive sensor detects liquids and bulk materials through non-metallic walls at sensing distances of up to 10 mm. A typical application is fill level detection in tanks, containers or pipe systems for all types of media (liquids, solids and powders). Its IP 68 housing ensures dependable function under almost all operating conditions.

Majorsine inverters offer power ratings of 1KVA or 2KVA in a compact, 2U rackmount configuration. The inverters provide an output voltage of 110/115/120/125VAC from a choice of 24VDC, 48VDC or 125VDC inputs. Applications include DC power systems, SCADA and private network projects, remote power locations, utility substations, and anywhere that utility grade AC power is required.

AR-B1622 PC/104 form factor single board computer has an AMD Low Power Geode LX 800 500MHz CPU, DDR SODIMM memory support, COM ports, USB 2.0, EIDE interface, Watchdog timer, 10/100 Ethernet, Compact Flash slot, and 24bit TTL LCD interface.

The digital MI Series infrared (IR) temperature sensor has double the optical resolution of previous versions, optimizing its performance in difficult ambient conditions. The thermometers can achieve up to 22:1 optical resolution and withstand ambient temperatures as high as 180 degrees C without any cooling.

YS1000 series of single-loop controllers offer improved connectivity with supervisory control systems. The series can be used with communication protocols such as Ethernet and Modbus, has a color LCD display, and has a depth of 25 cm, 7 cm less than the preceding model.

Users can easily integrate Red Lion's G3 series HMI, Modular Controller and Data Station products with the ControlLogix and CompactLogix PLCs, via serial or Ethernet. The PLC's tags are simply exported as a CSV file from Allen Bradley's RSLogix 5000 software, and then imported into Red Lion's Crimson 2.0 software.

Designed primarily for cleaner liquids, Model TFXP can reliably measure liquids containing moderate amounts of suspended solids or aeration. The portable transit time flow meter is for long or short term flow measurement surveys on full-pipe liquid systems. It is ideal for verifying calibration of permanently mounted meters of all types.

TwinCAT automation software now conforms to OPC UA (Unified Architecture). The new OPC UA standard is based on TCP communication and is, therefore, platform-independent. The "Unified Architecture" specification creates the basis for new platform-independent communication and information technologies.

LabVIEW Embedded Development Module now works with the QNX Neutrino real-time operating system (RTOS). This lets engineers add support for multicore processors and target any supported hardware platform for QNX Neutrino.

The PCIe-4065 DMM for PCI Express bus, and the PCI-4065 DMM for PCI, offer measurements of DC or AC voltage/current; 2- and 4-wire resistance; and diode test. The 6 1/2 digit DMMs are suitable for test and measurement facilities and original equipment manufacturers (OEMs) who embed DC or AC measurements into an end-product or test system.

ORBexpress, based on the CORBA standard, allows embedded developers to use the performance benefits of TI’s DaVinci technology. ORBexpress enables code portability across both the TMS320C64x+ DSP and ARM cores of the DM644x devices, speeding development of a host of digital video processing applications—client-side video, security video surveillance, set-top boxes, video phones, and automotive vision systems.

With the MiniMark printer, users can quickly create signs and labels for general facility ID, procedure signs, pipe markers, equipment identification, panel labels, rack and shelving labels, and many other applications that help companies manage assets, increase worker safety, and ensure code compliance.

PLC Code Generator software package enables manufacturers and machine builders to considerably cut machine project development and debug time, and overall cost of ownership. The software is downloadable via the website and runs as a client application on the user's machine, connected to a hosted database. Currently, the PLC Code Generator can develop ladder logic programs for Allen-Bradley and Omron PLCs.

FPM-3121G industrial 12.1” XGA TFT flat panel monitor works in applications with limited space. The monitor has a resolution of 1024 x 768, direct-VGA signal input, anti-reflective screen with tempered glass, and an OSD (on screen display) control pad on the bezel. Prices start at $850.

CP62xx Panel PCs are available with processors up to a 1.8 GHz Pentium M. With a depth of 2.4 in., the IP 65 rated displays help reduce machine size and cost. The units are also suited for use as HMI and SCADA devices for control systems.

5FR and 5JR series of solenoid valve connectors convert alternating current to direct current, reducing coil burnout due to valve sticking while eliminating the “hum” of alternating current. Their low profile cnfigurations make these connectors suited for installation in applications with space limitations.

OS24-SR Solar Power Supply provide power to a Wireless Radio Modem to function as an Access Point and/or Repeater. It uses a high efficiency photovoltaic solar module (PV) to convert the sun’s energy to 12 Volts dc. The system's solid-state controller maintains continuous battery monitoring and temperature compensated charging during daylight hours.

RHI90N Series Incremental hollow-shaft Rotary Encoders for mechanical drive and lift engineering applications provide pulse counts up to 2500 ppr at 10 – 30 VDC operation. A rugged metal plate assures accurate, reliable operation in application environments prone to extreme shock and vibration.

SeaDAC family of USB compatible data acquisition and control modules meet the needs of test and measurement, security, and industrial control applications.The modules connect to any computer's USB port. Options include Reed and Form C relays, optically isolated inputs, TTL interface to industry standard solid-state relay racks, and A/D and D/A functionality.

Repair Kits are for use with Blancett Model 1100 Turbine, Quik Sert, FloClean, Multi-Jet, and Impeller type flow meters. Repair Kits are for abrasive waterflood projects and hostile industrial use, but can also be used in conventional applications.

AutoManager View 2007 PC desktop solution helps people across the enterprise to quickly view, print, compare and annotate engineering documents. Supporting over 200 different file formats, AutoManager View 2007 views all CAD, Microsoft Office and Adobe Acrobat documents from a single integrated and user-friendly environment. It includes support for AutoCAD, Autodesk Inventor and SolidWorks.

Food-Grade Silicone Suction Cups are available in sizes and shapes for picking muffins, cakes, and pastry directly from pans as they exit ovens or for placing completed packages into cartons. Rated for use at up to 600ºF (316ºC), these non-marking translucent vacuum cups are offered with fittings, spring suspensions, and mounting hardware.

The Rosemount Analytical liquid analysis platform significantly simplifies operation and maintenance. The Model 1056 Single/Dual Input Analyzer allows a user to choose from any combination of measurements: pH/ORP/ISE, Resistivity/conductivity, Percent Concentration, Chlorine (Free, Total, Monochloramine, pH independent Free Chlorine), Oxygen, Ozone and Temperature.

Maplesoft’s Maple Toolbox for MATLAB® allows MATLAB users to benefit from Maple 10, the best mathematical software on the market for solving complex mathematical problems. The Toolbox considerably increases engineering productivity with up to 50 times faster performance than the MATLAB Extended Symbolic Math Toolbox. It also provides powerful ergonomic analysis functions as advanced statistics or graphics.

M-Series sensors are being used by dairy manufacturers to provide accurate level and temperature measurement for clean-in-place tanks. The sensor's accuracy enables manufacturers to quickly clean their system thoroughly and responsibly in compliance with industry regulations on the cleaning of dairy processing equipment.

ICM8 Communication Gateway module provides online data monitoring of Red Lion temperature controllers and PAX Series Panel Meters via Ethernet. ICM8 offers RS232 and RS485 serial ports and a 10 Base-T/100 Ethernet port, and is an inexpensive alternative to proprietary COMM cards.

Additions to the GRN Needle Gripper line include models for insert mold applications, including cloth or vinyl. One model has curved needles that rotate to securely grip material, offering a more reliable insert solution.

DuoPak signal conditioners offer two channels of signal isolation and retransmission in one compact package. Units can be custom configured to accept any two process signal inputs including DC voltage or current, AC voltage or current, frequency, potentiometer, or RTD temperature.

KAN354B router provides a BACnet WiFi Mesh network for indoor commercial and industrial building systems. It enables new and retrofitted buildings to be outfitted with state-of-the-art building controls with minimal or no new wiring required. BACnet is a standard protocol for building automation and control systems.

Clarity SP rear-projection Digital Light Processing (DLP) cubes are available in either “open system” or “integrated system” configurations and come in diagonal sizes of 50, 67, and wide screen 70 in. Prices start at $20,000.

SCANEX barcode readers have Gas Zone 1 and Dust Zone 22 ATEX approvals, with North American approvals pending. The readers are available in hand-held versions with wireless or cabled operation, stationary miniature styles, and intrinsically safe models. SCANEX may be used for production management in a variety of industries with hazardous locations.

The I/O modules for Tricon triple-modular-redundant (TMR) safety and critical control systems offer higher point density, higher resolution, faster scan rates, and user-configurable nominal load limits than previous models. These features provide increased speed and better accuracy in high-speed critical control applications, while decreasing the cost per I/O point and cost of ownership.

RK series of rack-mount industrial Ethernet managed switches are offered in 16, 25 and 32-port models. The switches are extremely configurable with up to four flexible slots that accept a wide range of modules including 10/100 Mbps and 10/100/1000 Mbps copper RJ45 ports; 10, 100 or 1000 Mbps fiber optic ports for distances up to 120 km; plus Power Over Ethernet (POE) ports.

The MRHQ Rotary Air Gripper integrates gripping and rotating functions, which saves space and simplifies wiring and piping. The vane style rotary drive mechanism allows for a very compact cross section enabling access into tight spaces. The gripper jaws are guided using high precision and high rigidity ball bearing guides.

UEILogger series of data loggers/recorders provide up to 150 A/D channels or 288 digital I/O. Each logger is matched to the user application by installing the appropriate I/O boards in up to 6 I/O slots. Loggers require no programming. The logging application is configured using a simple, intuitive, Windows-based application that sets up the logger and extracts data from the logger’s memory.

The EZ Mark labeling system is capable of printing wire markers, cable markers, name plates, component labels, pilot lights, switch plates and more.

TwinCAT Remote Synchronization library of software function blocks helps users synchronize several multi-axis machines that have TwinCAT control systems. The software allows for general time synchronization of information for distributed control to coordinate multiple machines by calculating offsets to compensate for differences in execution time and CPU clock frequencies.

Rosemount 3051S Instrumentation for pressure, flow and level is now available with the ASPT Diagnostics Suite for troubleshooting, detecting, and preventing abnormal situations. It uses statistical process monitoring technology to provide an early warning of abnormal process or equipment conditions such as plugged impulse lines, changes in fluid composition, or other events signaled by a change in the noise characteristics of the pressure signal.

Intermec's CN3 and CV30 wireless mobile computers will use AirForce One Wi-Fi technology from Broadcom. The addition of Wi-Fi technology optimizes device security, roaming and interoperability and offers higher levels of integration, power savings and voice over IP performance.

InFusion Condition Manager collects and analyzes real-time diagnostics from all plant production assets and drives the appropriate actions to help improve overall asset performance management.

AVIAOK, Drivven and S.E.A. have developed custom wireless modules for the CompactRIO platform. Modules are suitable for automotive, aerospace and military in-vehicle applications; wireless communications; position monitoring for mobile applications; and direct connectivity to in-vehicle sensors for electronic control unit (ECU) design and rapid prototyping.

Enhancements to LabWindows/CVI 8.1 include a simplified interface for communicating between local or distributed LabWindows/CVI applications as well as a single toolchain to easily control and communicate with real-time targets.

The TP-Pipe Series provides protection for field mounted transmitters from surges and transients from field cabling. The unit is encased in an ANSI 316 stainless steel housing, threaded for the common conduit entries found on field transmitters. It operates without affecting field transmitter operations and is available for hazardous area use with approvals for intrinsically safe and flameproof operations.

Datalogic Jet PDA and Kyman-Net mobile computer have voice technology support via the vo-CE software suite, powered by Nuance speech engines. This solution enables the mobile computers to be used with any data capture technology, including laser scanner (barcodes, RFID, imaging), data entry via keyboard, and voice.

Power off Magnetic Brakes (PMBs) are available in nine standard frame sizes ranging from 30 to 120, with a torque range from 45 lb-in to 4250 lb-in (5 Nm to 480 Nm), in diameters from 3.30 in. to 11.89 in. (84 mm to 302 mm). Operating voltages of 24 / 90 / 190 VDC are standard, with other voltages available upon request.

The EP811 features an Intel 852GM with ICH*4 chipset. The EP811 SBC supports Intel Pentium M and Intel Celeron M processors running at a 400MHz FSB speed. An optional low voltage Intel Celeron M processor is also available. The EP811 meets the EPIC form factor with PC/104 expansion capability: the board comes with both PC/104 for 16-bit ISA and PCI104 for 32-bit PCI interfaces.

ISaGRAF 5.3 provides a unified development environment for the ISaGRAF installed base. Users will now have the ability to program and support the entire range of ISaGRAF controllers using the same development environment. An ISaGRAF 3 application can be created, compiled, debugged, simulated, downloaded and monitored. No modification to the ISaGRAF 3.x controller is required.

The heavy-duty shaft option for DC25 DuraCoders and H25 resolver transducers carries a 100 lb radial load and a 50 lb axial load rating, delivering a 250% increase over the current radial load rating of 40lb. The 5/8” front shaft is made of stainless steel. The increased radial load ratings enable accurate position readings without slippage of either chains or belts.

The UNO-1019 DIN-Rail PC has a Windows CE 4.2 embedded OS, one CF expansion slot for data buffering and storage, and I/O interfaces, including 2 Ethernet ports, 4 serial ports and 4 digital I/O. It has an operating temperature range of 0~70°C, and starts at $395.

JAM100 Mini Diaphragm Chuck with Spindle Unit is designed for micro machining or micro manufacturing applications. With built-in air cylinder and spindle unit, the total TIR can be under 0.001mm.

FPS200 TRUNKGUARD Fieldbus Power Conditioner provides conditioned power for FOUNDATION Fieldbus H1 networks in general purpose and non-incendive applications. It is available in both simplex (non-redundant) and duplex (redundant) models. The “duplex” configuration provides redundant, load-sharing, hot-swappable power conditioners.

Prodigy-PCI Motion Card for multi-axis, high-performance control is available in 1, 2, 3, and 4-axis versions. The card provides advanced motion control features including trajectory generation, servo loop closure, quadrature signal input, motor output signal generation, performance trace, on-the-fly changes and commutation. Motor type can be software-selected on a per-axis basis, and includes DC brush, brushless DC, step, and microstepping.

MP85A FASTpress evaluates and transmits process parameters to the production data server. Data is stored within the press and can be transmitted via an Ethernet interface to a production data server. Component names can be transmitted individually, while specific process results or measurement curves can be selected for saving.

UTS connectors are fitted with seals to provide sealing in accordance with IP68 & IP69K standards. This means that the connectors are able to withstand water immersion at a depth of 10 m and high-pressure cleaning @ 140 bars. The seal is dynamic in that it is maintained even in the event of the cable being subjected to a pulling or bending motion.

EDS16PR and EDS32PR high density device servers can quickly and securely connect, access and monitor up to 32 serial devices over existing management or production networks from a single 1U high/rack mount data center ready unit. These platforms provide enterprise-grade security and intelligent web services for attached devices, including XML, Really Simple Syndication (RSS), and e-mail.

The B&APC620 and Panel PC industrial PCs are available with optional IP65 protection and a DVD-RW drive that can read and write all standard DVD formats. This allows for the continuously increasing need for high-capacity memory media and accommodates the trend of recording more production and quality data.

The Memor pocket-sized Windows-powered mobile computer is an extremely compact, lightweight, versatile and robust device that combines integrated bar code reading and wireless communication capabilities. It is suitable for light industrial operations such as warehouse management, inventory, picking, shipping, receiving, etc.

With the new CP69xx "Economy" Control Panels from Beckhoff Automation, high quality HMI hardware is improved with enhanced features and reduced cost from 20 percent to 40 percent when compared to earlier designs. The panel’s innovative DVI/USB extension allows devices to be installed at a distance of up to 50 m as standard – improving upon conventional DVI/USB connections by a factor of 10.

MOVIFIT Field Integrated Technology combines the advantages of decentralized control with drive and communication technologies for automotive, food and beverage, logistics and other sophisticated material handling applications. Preconfigured control routines for both horizontal and vertical conveyor applications provide ready-to-use functions that simplify programming and start-up.

JACKPAC modules can be installed directly on the machine, in the production plant, conveyor system, or within a process, without requiring additional enclosure. The modules include Form C Relay Output, Pulse Stretching Modules, Over-Voltage Protection Modules, and Signal Isolators.

OC Robotics has built and tested a demonstration snake-arm robot capable of sealing, swaging and inspection within aircraft wings. The snake-arm robot acts as a flexible extension for a Kuka industrial robot and is fed through the access hole. The snake-arm can follow a path into the wing box using the Kuka as a delivery tool.

Armored M12 eurofast cordsets provide protection against abrasion, cuts, water, oil and impact, and are excellent for use in automotive, stamping plants and welding environments. The cordsets use rugged PVC-jacketed cable with interlocking aluminum armor that is ITC/PLTC (instrumentation tray cable) rated and meet Open Wiring specifications, allowing their use in place of conduit.

Retriever Series RS-232/422/485 to Fiber converter extends communication distances up to 2 km over multimode fiber or 20 km over single mode fiber. The converter is equipped with multiple interface circuits, including RS-232, RS-422, and RS-485 (2 or 4-wire).

The BK1120 Bus Coupler integrates any of the 200+ distributed I/O from Beckhoff's KL family into EtherCAT systems. It provides a clear path for next generation industrial Ethernet implementation while offering complete backwards compatibility with existing Beckhoff I/O systems.

KEPServerEX OPC server suite for GE PACSystems RX3i and RX7i controllers supports Symbolic Variables. This provides the ability to read and write Symbolic Variables to and from the controller. In addition, to optimize performance the Kepware driver reads blocks and performs multi-item writes to Symbolic Variable memory.

Visualizer operator interface works with the Real-Time Application Platform (RTAP) on Linux. The solution uses Linux on the server side, ensuring security and performance, with Windows on the client side, creating a familiar and accommodating interface for the operator.

The Wireless Logic Controller platform simplifies the integration and development of automation systems and enterprise control solutions with hardware, user programmable IEC 61131-3 standards-based middleware, and end-user data communications. Development, monitoring and control is made easier through the use of integrated cellular communications, industrial hardened I/O, and standard fixed-wire networks integrated into one rugged design.

Model 44X32 is available in Standard Pull and Magnetic-Latching Pull styles. Both work in applications that require very large pull-in forces up to 30 lb. Options include special plunger configurations, unique coil voltages, and a boot if dust prevention for the plunger is needed.

The Adept Viper s1700 20 kg payload robot has a 1717mm reach, high flexibility with its six degrees of freedom, and can be floor or ceiling mounted. The robot is suitable for such applications as material handling, packaging, machine tending, and other operations requiring fast and precise automation.

The AIMB-542 micro ATX motherboard uses the Intel 865G chipset, supports Intel Pentium 4/Celeron D processors with up to 4 GB of dual channel memory, is constructed of industrial-grade, RoHS complaint materials to withstand harsh environments, and is available for purchase at a starting cost of $185.

The MotiFlex e100 three-phase AC motor drives have Ethernet Powerlink and TCP/IP connectivity, and can be used in both centralized control and distributed "intelligent drive" scenarios. The initial launch of MotiFlex e100 provides drives rated for output powers up to 16 A, in five steps of 1.5, 3, 6, 10.5 and 16 A.

ServoSoft v2.6 now has EasySize Wizard, which walks users through each step of the servo system sizing process. Helpful hints are displayed at each step. Each time the user clicks 'Next,' the main form follows the wizard so that the user can see how ServoSoft is organized and, eventually, learn to navigate without the wizard.

Model KPCI-488LP Low Profile GPIB Controller Interface plug-in board provides complete software support for Windows XP and 2000. It supports industry-standard VISA (Virtual Instrument Software Architecture) libraries, and its driver library is fully compatible with Keithley, Capital Equipment Corporation (CEC), and National Instruments (NI) command sets. Price: $399.

The low-profile Cm5 connector is designed for servomotors with a flange size less than 150mm2, offering simplified internal wiring and replacing two bulkier conventional circular connectors. The connector capable of handling up to 40A and is completely sealed and shielded for high reliability. Is simple harnessing reduces assembly and installation time in motor applications.

With a current rating up to 15 amps at 300 volts and a wiring capacity of 30 to 14 AWG, these micro miniature terminal blocks are available in single level, multiple wire and dual level designs. The ASIMT, ASIMTQUATTRO and ASIMTTB are very small terminal blocks that are mounted on the 15mm DIN rail and are ideal for applications where space in the enclosure is limited in all directions.

Deltran AKB series brakes are available in diameters from 1.83 to 5.00 in. and provide static engagement with torque from 12.5 lb-in to 470 lb-in. These brakes are simple to install and provide a safe, cost-effective and energy efficient braking solution in applications such as robotics, medical equipment, actuators, motor brakes, postal handling equipment and packaging.

The ET-16MS offers 16 auto-detecting 10/100 ports that support auto-negotiating (10/100 or 10/100/1000), auto-crossover, and auto-polarity for plug & play connections. The ET-18MG has the same ports plus 2 Gigabit combination ports that support copper and fiber connections up to 80+ km. These products share the same compact footprint as SIXNET's ET-9MS & ET-9MG Industrial Ethernet Switches.

EP812 low power EPIC form factor SBC supports Socket 478 for Intel Pentium M and Intel Celeron M processors running at 400MHz FSB speeds for convenient logistic and better CPU performance. The EP812 features a DVI-I display function for dual external display applications, such as Digital Signage.

USBscope50, in combination with the LabVIEW and an Agilent VEE driver, converts a PC into a one-channel scope. It can be stacked with other USBscope50s to make a multi-channel solution. In this configuration, each module shares its phase and trigger status with the other modules in the stack ensuring tight channel-to-channel matching and concurrent trigger.

Retriever Series 10/100TX to 100FX Industrial fiber converters are available in five models. RUE-110 Series supports both half- and full-duplex modes with auto-negotiation function. The fiber port of RUE-110 Series uses a SC or ST connector. Multimode models RUE-111 and RUE-112 can support distance up to 2 km and single-mode models RUE-113 and RUE-114 can support distance up to 30 km.

The SM2315DT incorporates a Servo Motor, Amplifier, and Motion Controller into the same integral frame. It has an 8-pole compact rotor with higher copper filling factor that can generate two times (2X) more continuous torque than the company's previous model. It delivers 112 oz-in of peak torque while maintaining 57 oz-in of continuous torque with a maximum speed capability of 4700 rpm.

Accepting any 24 Volt DC source including battery power, No. MMP-TM55-24V GP52-079 reversible gearmotor is rated for 80 in-lb continuous torque at 58 RPM, and 448 in.-lb Peak. The motor measures 2.14” in Diameter, by 7.7” long, and has a keyed output shaft of 12mm diameter by 25mm long.

Stan-Cor MK Series non-metallic centrifugal pumps offer maximum chemical resistance and feature hydraulically-balanced operation to reduce bearing failures by eliminating thrust loads. They are easy to assemble, and are available in three sizes with 60Hz operation at up to 3500 rpm and 330 gpm, and 50Hz operation at up to 2900 rpm and 62 M3/H.

Model USB-IIRO4-2SM dense multifunction device incorporates four optically isolated digital inputs, four Form C (SPDT) electromechanical relay outputs, and two RS-232/422/485 serial communication ports, packaged in a small, rugged, industrial enclosure. This USB device is an ideal solution for adding portable, easy-to-install, digital and serial capabilities to any PC or embedded system with a USB port.