Industry Products

The controller combines a Simatic S7-1500 controller with motion control, technology and safety functionality with a Sinamics S120 drive control in one device.

These drives accept a range of input voltages (12-110 VDC, 18-80 VAC) and provide over-voltage and overcurrent protection, motor auto-configuration on power up and Soft-start at power on. Motor output current ranges from 0.3 to 7.2A.

HMB-6100, designed to HybridTCA compute specifications, is compatible with Lanner’s x86 HTCA-6000 series network appliances to boost data center performances, bandwidth and connectivity for telecom applications.

The Model 54141A complies with the VITA 65.0 3U VPX specification, it also offers analog and digital interface options for the VPX P2 backplane connector to meet system-specific requirements.

Interoperability between Adaptec Smart Storage adapters and MegaRAC SP-X manageability firmware powering embedded base management controllers (BMCs) reduces data center operational costs by enabling remote management capabilities including platform status monitoring and problem notifications, diagnosis and recovery.

The combination of Softing's mobiLink interface with the Field Xpert SMT70 or SMT77 Tablet PC from Endress+Hauser offers users a system solution for configuring and parameterizing field devices for the most important process automation protocols - HART, PROFIBUS PA and FOUNDATION Fieldbus

With the CMS 700i, Leuze electronic is bringing a 3D contour measurement system to market. It is based on the CML 730i measuring light curtains and can be adapted to specific customer requirements.

The universally interchangeable design provides flexible installation with C-face and TC-face inputs, perpendicular output and 6 mounting positions. Five gearbox sizes support 56C up to 254/6TC NEMA motor frames and 6 ratios are available from 10:1 to 120:1.

EasyIO launched the FT-04, a 2 x 2.4 inch controller for many applications. Wi-Fi only, it can extend control to anything that needs connectivity, control, and monitoring.

FCI's wet gas (WG) sensor delivers gas flow measurement in the presence of moisture and condensation droplets. Available with the Model ST80, this WG sensor can be applied for use in entrained moisture and rain-shielding applications.

The NCA-6110’s specs include its support for up to 512GB DDR4 2666MHz ECCR-DIMM, dual GbE RJ45 ports, 4x or 2x 3.5” or 2.5” swappable bays, 1x RJ45 console port and 2x PCIe*8 FHHL or 1x PCIe*16 FHFL.

The Allen-Bradley Kinetix 5100 servo drive has multiple control modes available to support a range of high-speed, low-power motion control applications.

The voice coil stage (VCS02-005-BS-01-MXYTh) is a closed loop positioning system that can be used for positioning applications that require a limited rotation theta stage integrated. The stage utilizes a custom low-profile design that utilizes a unique electromagnetic circuit design.

The FS-3200D-10GE and FS-1600D-10GE cameras have two-channel dichroic prisms that divide the incoming light to two precisely-aligned CMOS area scan imagers.

POSITAL’s Hollow Shaft Kit encoders feature an integrated rotation counter that records each revolution the instrument experiences, even if these occur when no external power is available.

The first device applications of the protection relay will be overcurrent and earth fault protection and transformer protection in substations.

Shielded constructions include both a tinned copper braid shield and aluminized polyester foil overall shield. The cable's outer jacket is pressure extruded Thermoplastic Elastomer (TPE) with moisture, chemical, UV and weathering resistance,low temperature flexibility, and good flame and fire resistance.

Three pump families in the Vortik series - VPs, VPm, and VPg - are based upon general volume ranges, and each includes models for dispensing one-component (1K) and two-component (2K) fluids.

With the ability to operate in temperatures between -40°C to +85°C, the XMC477RC is designed for naval/marine-, land- and air platforms within defense and aerospace markets including fire control systems, airborne mission computers, radar systems and flight control.

In order to enhance the reporting options, a batch report with a basic choice of process parameters has been integrated. Users can now create reports with the help of MS Excel. Braumat V8.0 is also now connected to the established PM- Quality option.

The products were developed for use in power generation turbine research & development and rotating asset monitoring in nuclear facilities.

The configuration makes the OPTIV M future-ready and compatible with a portfolio of contactless and tactile sensors, software and collaborative technologies.

AMCI’s SV160E2 Integrated Servo Motor includes an integrated dual port switch with EtherNet/IP, Modbus-TCP, & Profinet connectivity. The SV160E2 incorporates a servo motor, drive, and controller in a single unit.

The HB3-Compact (HB3-C) offers the possibility for vertical or horizontal mounting and uses maintenance-free vacuum switching technology. These features make it suitable for retrofit applications in power plants, where the security of supply is crucial, and space is limited due to existing installations.

HotBackup is a solid state ‘live host’ backup solution suited for use in process and mission critical legacy computer systems in a range of applications in the telecommunications, semiconductor manufacturing, industrial process control, engineering and manufacturing, oil and gas, mil/aero and media post-production industries.

This in-vehicle system is certified with CE and FCC and is in compliance with ISO 7637-2. Axiomtek’s UST100-504-FL features a single-sided I/O design for space-limited vehicle applications. The vehicle PC is powered by the LGA1151 socket 7th/6th generation Intel Core or Pentium processor with up to 35W TDP and comes with the Intel H110 chipset

The Series 273 features a pinching mechanism that remains firmly in place to provide better tube retention and eliminates breakage or damage to the soft tubing

The NCA-6210 will be Lanner’s first NFVI-ready network appliance verified as an Intel Select Solution for NFVI FP (expected in Q4’19). Optimized as a NFVI platform for virtualized network function (NFV) software,

These plastic limit switches have standard U.S. 25mm mounting hole spacing; housings are double-insulated and epoxy resin-filled, providing IEC IP67 protection. Contacts are Snap-action (Z11) with 1 N.O. and 1 N.C. contact on all units.

With three spectral models–measuring at wavelengths of 1 µm, 1.6 µm, and 2.3 µm, respectively–the full Thermalert 4.0 lineup can measure temperatures between -40°C and 2,300°C and is ideal for applications where non-contact temperature monitoring is critical, such as metal, steel, or glass.

The Flexy gateway pulls data from any supported PLC from ABB, Rockwell, Siemens, Mitsubishi, Omron, Eaton and others. Canary’s Enterprise Historian is configured to pull PLC data from Flexy’s embedded OPC-UA server, and data flows automatically from Flexy directly to the Canary Historian.

With the service portfolio including Mindsphere app, Siemens is focusing on the operative demands of machine users, who are looking for full transparency for spare parts and servicing.

This release expands the capability of XLReporter for Web reporting, 21CFR Part 11 features and ISA18.2 Alarm Management.

The MRD-455-NA is well suited to industrial applications where machine to machine communication is vital. It has a design with all interfaces and LEDs at the front, DIN-rail mounting, isolated power supply and an operating voltage range spanning from 10 to 60 VDC.

Zettlex sensors use printed circuits. This enables position sensors with no contacts. IncOders are suited to environments where potentiometers, optical or capacitive devices may prove unreliable.

The Sirius 3RW55 Failsafe soft starters are suited for starting and stopping operations of high-power motors with a rated output of 5.5 to 560 kilowatt (kW) at 400 volts (V).

The VP460 Direct RF Processing System is aligned with the SOSA standard to deliver the interoperability required by the US Air Force, Army, and Navy.

Vortex flow sensors are intended as a method for measuring flow of water-based liquids that is independent of the liquid's pressure or temperature fluctuations.

Developed on the Keysight PathWave software platform, the PathWave Test 2020 software suite enables 5G, IoT and automotive engineers and managers to streamline test data processing and analysis to speed product introductions.

The transmitters are available with an integrated Bluetooth interface that enables users to wirelessly display measured values and perform configuration tasks. The device is operated using Endress+Hauser’s SmartBlue app.

The 1 mm per turn lead screws and crossed roller bearings are used in these black anodized stages. They are suitable for: Sampling, assembly, sorting, testing, laser drilling and machining, and positioning in lab and manufacturing environments.

The 3Xi-M110 reduces the dose and exposure to X-rays during inspection and features soldering quality inspection functions for PCB assembly applications.

Key to the transmitter is its use of interchangeable communications and sensor modules enabling the transmitter to be upgraded as required without having to purchase additional units. Modules for HART, Profibus, Modbus or Ethernet communications and ABB’s digital EZLink pH/ORP, conductivity, dissolved oxygen or turbidity sensors are available.

StratEdge uses an automated system in a cleanroom environment to perform eutectic AuSn die attach of compound semiconductor devices that have a backside gold surface finish.

The WSEN-PADS absolute pressure sensor offers the possibility of preparing the measured data for various applications using activatable integrated algorithms in such a way that the programming workload for a connected controller is reduced.

The DS1202Z-E comes standard with 2 analog channels, 24MPts of deep memory, a 60,000 frame segmented record mode, standard serial decode and triggering, high resolution FFT, 15 trigger types and 37 integrated measurements making the DS1202Z-E a debug tool for design engineers.

The EyeVision software supports all setting options, also the adjustment of the depth of field. Therefore the EyeCheck always delivers images, from a distance to the object of 25 mm onwards.

The NCA-1513 features Intel’s QuickAssist Technology, offering cryptographic acceleration and commercial-grade LAN functions in a 231mm x 200mm x 44mm (WxDxH) form factor.

The primary difference between these two families of DC/DC converters is the TEN 40E has 2:1 input ranges of 9-18 / 18-36 / 36-75 VDC versus the TEN 40WIE series with 4:1 input ranges of 9-36 / 18-75 VDC.

Eaton XT series electronic overloads have a broad full-load-amperage (FLA) range (0.33-175A), selectable trip classes (10A, 10, 20, 30), and can be separately mounted to NEMA, IEC and DP contactors.

The 12” tablet is designed to provide the mobility and connectivity to help field users stay productive. Updated features include an 1000 NIT FHD display with anti-glare coatings, allowing customers to access and showcase their work even when out in direct sunlight.

This voice coil motor is designed for applications such as: Pick-and-place, testing, laser steering, laser speckle reduction, mirror positioning, scanning, oscillation, switching, clamping, and haptic feedback in hand held medical, dental, or industrial applications.

Vision Insights powered by Xi IoT is a supply chain optimization solution comprised of Hardis Group Vision Insights software running as a container on the Nutanix Xi IoT platform.

scanCONTROL 3060-25/BL laser scanners are designed for measurement tasks with high demands on resolution and accuracy. Therefore, these sensors are primarily used in automation tasks, production and process monitoring as well as quality control.

The capaNCDT MD6-22 offers touchscreen operation. Furthermore, different features are preset in the factory such as automatic gap detection, for parallel alignment of the flat sensors for double-sided measurements.

Particularly useful for small to medium-sized businesses, the SaaS framework offers new tiered product bundles in which customers can select the right level of capabilities they need, as well as monthly subscription-based billing and licensing and a pay-per-use computing infrastructure.

ReadyPack is a smaller version of SOMIC’s 424 T2 (D) machine and completely different than the larger SOMIC FLEXX III that was introduced a year ago. ReadyPack is also designed with a slower collating speed.

This product features mixed analog and digital inputs and outputs, which accept a variety of standard sensor and signal types including thermocouples, RTD’s, voltage, and 0-20 mA current.

The RT PolarFire FPGA is supported by all necessary radiation data, specifications, package details and tools customers need to start new designs now, initially with the commercial version of the device.

The CEMC Series actuator has a set of built-in sensors which stops them from being exposed during the manufacturing process without impacting on the overall dimensions of the actuator.

The ICO320-83C offers expandability and I/O, including four RJ-45 Gigabit PoE ports or four RJ-45 LAN ports, two RS-232/422/485 ports, two USB 3.0 port, one VGA port, one CANbus 2.0 A/B port, and one 8-bit programmable DIO.

iTwin Services enable engineering firms to create, visualize and analyze digital twins of infrastructure projects and assets. iTwin Services federate digital engineering content from BIM design tools and multiple data sources, enable “4D visualization” of digital twins, and log engineering changes along a project/asset timeline, to provide an accountable record of who-changed-what-and-when.

Sciemetric EDGE delivers a universal platform to control a variety of manufacturing and industrial processes. This distributed data analytics system works to remove barriers to continuous process monitoring.

Through a partnership with parent company Pimsoft, Emerson is providing customers with an enterprise-wide platform designed to validate the accuracy, reliability and usability of plant measurements.

In an effort to further optimize data intelligence, the latest version of Crimson has the ability to use expressions in filters for SQL queries. This allows operators to pull a subset of data from a SQL database based on dynamic search criteria.

The EventCam is specifically designed for the detection and analysis of sporadic errors in industrial processes. It can be integrated into stationary and mobile applications, is network capable, and delivers single frames and video sequences in for error analyses.

CODESYS Automation Server provides numerous functions demanded by Industry 4.0 architectures, When programming controllers via IP-based networks such as Ethernet or Internet, users can now secure their expertise and data by means of encryption, password, security key, or X.509 certificate.

The Lightning edge computing platform brings intelligence to the edge, at or near the point where data originates, and facilitates analysis with the lowest latencies to improve operational outcomes.

This joint solution is designed with application capabilities to foster collaboration and enable users to meet the demands of growing engineering complexity.

ABB Ability Remote Insights for service uses commercially available headsets to assist field service technicians and expand the reach of ABB subject matter experts. The technology enables a field service technician to share his or her view of a situation using the device’s camera, and receive guidance directly from an expert through on-screen annotations, chat, and document sharing.

The Picomag update enables measurement of flow of electrically conductive fluids and the process temperature and conductivity. It enables commissioning with Bluetooth using the SmartBlue App and integration with IO-Link technology.

Discrete models are available with adjustable sensitivity and one sensor can be standardized for many materials. Operating voltages from 10 to 30VDC are available; temperature ranges up to +70C are now offered on some models.

Phoenix Contact’s PLCnext Technology gives developers a control platform that combines traditional IEC 61131 programming with open-source languages like Linux.

For system integrators and engineers, the I/O modules provide more options for bringing existing devices into groov EPIC, as well as meeting requirements for temperature control applications. They also include designs for mixed signal types, signal isolation, and channel density:

In this integrated solution, iSID’s asset inventory now incorporates the asset information stored in the Asset Guardian database, including the detailed asset information that is not available from traffic monitoring.

Built on the ACR9000 platform, the ACR7000 family utilizes re-imagined hardware designs, designed for tabletop and laboratory style instruments.

The Model 204 water analyzer works to provide capability for environmental pollution control for wastewater treatment plants that must measure VOC contaminants to ensure water is properly treated before released, chemical/ petrochemical plants that measure VOC directly in the water.

CPX-AP-I enables valve terminals to be moved closer to pneumatic cylinders. Process data in and out of each bus module is as much as two kilobytes. Scan cycles for a mix of both valve terminals and I/O are below one millisecond.

Antaira Technologies’ low-port-count managed switches are industrial-grade devices that are Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

As with the first EyeSens generation the sensors can communicate with an SPS via the Profinet communication protocol. In addition, the EyeSens supports Modbus as well as TCP/IP and UDP communication.

The SRAP system consists of a Flexi Soft safety controller and a safety laser scanner – either the S300 Mini Remote for shorter scanning ranges or the microScan3 Core for larger monitoring fields. Safe Robotics Area Protection satisfies the criteria of Performance Level PL d in accordance with EN ISO 13849-1.

These IoT sensors offer range, accuracy and the ability to operate in harsh environments typically found in utilities, oil and gas, water and wastewater, factory automation and food processing industries.

The Model 410C01 signal conditioner is set up using a software interface, and DIN rail mounting with standard 24 VDC power. It provides a broad frequency range and a zero reset that synchronizes with machine cycle times.

Actin version 5.5 adds Actin Viewer enhancements, Motion Script updates and G-code support, for robotic systems developers to focus on the robot’s tasks rather than joint movement and paths.

TM1 Series stroke lengths are from 50 to 2,000 mm in 25 mm steps. Operating pressure is up to 5,076 psi (350 bar) with peaks to 6,526 psi (450 bar). Both plug-in and screw type flange models are available.

These DC-powered metal sensors work to provide accuracy in minimal mounting space and are designed for use in a variety of short or long-distance sensing applications.

Designed for any simple application, the Micro OCS controllers can perform in multiple industries from water treatment, to food processing, to HVAC/Environmental control and many others.

The Vectis system comes with all hardware provided fully integrated onto a 3ft x 6ft mobile modular fixturing cart enabling metal fabricators to bring the cobot to the work, or the work to the cobot with no anchoring nor dedicated footprint required.

The DRS-206-05-012-01-EX dual rail positioning stage is designed for applications that require long travel distances. It uses a cog-free brushless linear motor to generate a continuous force of 12.4 lbs [55.6 N] and a peak force of 37.4 lbs [167 N] with a total stroke length of 210 in [5341 mm].

The 87V MAX has an IP67 rating making it fully waterproof and dustproof, and has been tested to withstand a four-meter (13 foot) drop. It has an operating temperature range of -15 °C to +55 °C (5 °F to 131 °F), as low as -40 °C for up to 20 minutes, and can operate in up-to-95 percent humidity.

This solution is designed for paper, pulp, tissue, board, extruded film, calendaring, lithium-ion battery, copper and aluminium foil producers.

The software specifically enables customers to retain control of their data while providing integration with other inventory management, warehouse and ERP systems so that all stores, distribution centers and corporate offices are networked on the same platform.

Like the original CONTACTRON, the pro modules incorporate Phoenix Contact’s Hybrid Technology, which offers three-phase motor switching up to 5 HP. It has a service life of up to 30 million switching cycles.

All Inertia Dynamics clutches are recognized by Underwriters Laboratories to both U.S. and Canadian safety requirements.

NITRA coalescing filters are available with manual drains, semi-automatic drains that can be manually operated, or fully automatic drains. Polycarbonate or nylon bowls with metal guards are available on all sizes and all-metal bowls with sight gauge are available on larger 3xx and 4xx sizes.

Expanding upon MSA’s highly intelligent TruCal® sensor platform, the launch of its new industry-first Diffusion Supervision technology listens for and alerts plant technicians to blocked electrochemical sensor conditions.

Available in five surface-mount and through-hole packages, these components expand the Littelfuse TRIAC product line by making 150°C maximum junction temperature devices available in 600V to 800V with ratings of 12A, 16A, 25A, 30A and 40A.

Mencom’s LP1-E45UM-5 Low profile Panel interface connector has combined two of the most common and versatile components utilized by today’s integrators, machine builders, and panel shops.

This current sensing module is a tool for new and existing systems where an added level of monitoring and protection is required.

The MELIPC Series is targeted towards OEMs and end users running general manufacturing applications, and especially those who require a computing and data monitoring solution that takes up a limited amount of space with a small footprint.

The ArmorStart ST with integrated safety is a networked safety enabled On-Machine solution designed to integrate into Allen-Bradley Logix controllers and programmed using Studio 5000 software.

The IronHorse GSD8 series of DC drives is a microprocessor-based design with non-volatile memory storage that is programmable with adjustable parameters, programmable alarm outputs and offers a digital closed-loop algorithm for motor control.

The PowerPAK addresses the need for localized instrument power for new and existing applications when power is not readily available.

Print Perform is a print management system that works to maximize the potential of customer’s printer fleet. This print management program will manage, service and supply customers’ print solution.

With their BMP series Balluff has added an intelligent displacement sensor which provides the absolute position signal for the stroke travel of a piston via IO-Link as well as information about the sensor status and the current ambient conditions.

Features of these brushless voice coil motors makes them ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, scanning laser beam steering and filtering, wafer handling, and medical and pharmaceutical applications.

The programmable IDEA Motor integrates a precision brushless servo motor with an IDEADrive controller. The IDEA Motor is specifically designed for real-time embedded motion control and is suited for autonomous execution of single-axis motion.

This is a sensor with a 12mm x 14mm footprint and a 1.65mm maximum height that is able to be integrated into ultra-thin devices such as SmartCard-type key fobs, traditional automotive key fobs, special miniaturized key fobs (sport keys), Smartphones (to be used as a digital key with the same user experience of current PKE access), and other devices such as hand-held controllers.

The CompletePower Plus Universal Drive combined with ElectroCraft CompleteArchitect configuration software utilizes digital drive technology combined with an configurable user interface.

The enhancements are intended make it possible for companies to operate their plants, analyze industrial data and optimize their operations.

The range includes IP camera networking components, power supplies, surge protection, connectors, patch panels, and cables — all designed for harsh environments.

Micro-Epsilon designed the IF2030/PNET interface module as a link to PROFINET controllers. Terminals enable sensors from Micro-Epsilon to be connected to this module via RS422/RS485 interfaces.

Current QD designs are non-locking type, that require contact to maintain the couplings in the open position. Upon pulling the QD apart, each end closes and maintains the gas/liquid on each side of the fitting.

The CAPA310 is a platform designed for Industrial IoT and intelligent systems such as industrial automation, self-service terminals, digital signage, POS/kiosk displays, medical, and more.

The 8:1 input range of 9-72 VDC make these a solution for designers to standardize on one converter to support multiple applications and bus voltages.

This wireless access point provides wi-fi bandwidth necessary for real-time safety monitoring, including Emerson’s Location Awareness and wireless video. These applications are intended to enhance personnel safety practices, improve plant security and help ensure environmental compliance.

CLICK PID control is streamlined with only the features that most users need, including direct or reverse acting control, pulse width modulated control outputs, bumpless transfer, anti-windup, auto-tuning, process variable alarms, process variable limits, control output limits and error deadband.

igus CF130US and CF140US series tray rated control cables are specifically designed, tested, and manufactured for use in both continuous flexing and fixed tray applications.

This camera for industrial troubleshooting has a filter that enables maintenance, repair, and operations inspectors to visually identify and find the source of many common issues in high-temperature applications, including kilns, furnaces, refractory, and manufacturing.

igus CF130US and CF140US series tray rated control cables are specifically designed, tested, and manufactured for use in both continuous flexing and fixed tray applications.

The AU100-ER Two-axis Gimbal Mount is a platform for: Lasers and instrumentation for scanning, tracking, positioning, pointing cameras, optics, and lab and research applications.

The latest release, MapleMBSE 2019.1, offers enhanced modeling support to build and investigate model structures, as well as integration options with model management systems.

The addition makes the SLAMf Series an MFC from a U.S. supplier with NEMA 4X/IP66- rating and integrated EtherNet/IP communications as standard features. Therefore, this product series is a choice for the biotechnology and food and beverage industries, where hose-down/wash-down requirements are present.

The integrated portfolio comprises three software solutions. AVEVA Unified Engineering integrates process design with front-end engineering and 3D based design. AVEVA Unified Project Execution works with procurement and construction processes for capital projects. AVEVA Enterprise Learning works toenable the skilling of operators and engineers using Extended Reality (XR) and simulation tools.

PickMaster Twin is available in a multitude of configurations and can work with all ABB robots, and a range of virtual and physical machines. Coupled with the inherent software, the PickMaster Twin is suited for factories and production lines.

The model is a bi-directional AGV that provides more flexibility for movement along its guidepath as it can travel in both directions and when necessary rotate in place. The dual drive wheels also give this AGV the ability to travel laterally.

They are a choice for other applications that require accuracy, reliability, and structural integrity, including nuclear reactors, steam and gas turbines, chemical processes, and high temperature processing.

The solution leverages Ewon’s Talk2M platform to create a secure link between the Ignition server and the target machine allowing machines to be located anywhere world-wide.

The full M12 Power range includes cable assemblies, field-wireable connectors, and panel-mounted receptacles with a quick disconnect system. Because they are designed for a common 16-mm panel knockout, the new additions simplify panel upgrades.

The latest version of Simcenter Testlab adds extensions to Simcenter Testlab Neo software– a platform for test-based engineering— and to the other Simcenter Testlab solutions.

For secure remote access to the groov EPIC, the system offers VPN (virtual private network) client technology to connect to an OpenVPN-based VPN server. This option is intended to assist in creating secure data communication architectures, particularly with geographically dispersed systems.

UCal 4 Calibration Software helps derive value from NIR analytical programs with algorithms for custom NIR calibrations of almost any product including food, agricultural and industrial applications.

The UR16e combines a 35-lb payload capacity with a reach of 900 mm and pose repeatability of +/- 0.05 mm making it suitable for automatingtasks such as heavy-duty material handling, heavy-part handling, palletizing, and machine tending.

Typical applications include situational awareness, signals intelligence, ISR and radar, while the Pascal GPU’s parallelism also makes it a fit for GPGPU applications including machine learning and autonomy.

Manufacturing Cloud delivers a level of business visibility and collaboration between the sales and operations organizations of a manufacturing company. This is intended to allow them to have a better view of their customers through sales agreements and account-based forecasting solutions, providing visibility into their customer interactions while enabling them to generate sales forecasts.

iQ PULSE is LEC’s smart metering technology that is designed to integrate with a variety of existing meters in order to simplify AMR deployments. The solution is inclusive of a cellular endpoint, as well as software that provides data analytics, alarming and billing integration capabilities.

In this version, iSID analyzes the OT network and maps the operational business processes of the industrial facility. All business processes on the OT network are then graphically displayed, while each network-connected asset now includes the details of the business processes that each is connected to within the asset inventory maintained by iSID.

AsteRx SBi is designed for integration into any machine monitoring or control system. Location and 3D orientation data is streamed with constant low latency.

The MyEmerson development roadmap will centralize the management of software, hardware and workforce upskilling. With access to technical documentation, identification of device location, and the ability to initiate repair, replacement or service as needed, organizations gain maintenance and turnaround planning efficiencies

The MBD301 is suitable for mid-range to high-performance embedded applications in the fields of industrial control automation, transportation, gaming and digital signage

Once ATEN Unizon is installed on the client server, users can access the software remotely through Google Chrome, Microsoft Edge/Explorer, Mozilla Firefox, Apple Safari and other mainstream web browsers.

The PackFlow bundle features all the components needed for a print machine manufacturer or system integrator: line-scan cameras, BitFlow Axion-CL 2xE frame grabbers, software and LED illuminator. PackFlow installation performs quality checks at the full speed of the production line.

The company's Hardshell Fanless Technology combines fanless cooling, ingress protection and ruggedization, including vibration resistance, with an aim to ensure reliability in challenging environments. Their edge gateway systems provide processing and help users avoid data latency.

The solution will be showcased at ROEQ’s Pack Expo booth 7384B in Las Vegas, Nevada, September 23-25 featuring a MiR200 robot with ROEQ’s cart solution and top roller TR125 conveyor module performing precise delivery between two docking stations.

With an EtherCAT compatibility option, customers can utilize the controller without changing their whole existing communication architecture and machine software.

The sensors are touchless magnetic angle sensors with a permanent magnet that can be secured to an application’s rotating shaft, so that there is no direct mechanical linkage between the shaft and the measuring system

These reflective level sensors are designed to replace ultrasonic sensors in condensation applications, and other float, conductance and pressure sensors that fail due to contact with dirty, sticky and scaling media in small, medium and large capacity tanks.

This gateway, designed for Class 1 Division 2 Groups C and D locations, supports wireless configuration up to 240 remote nodes at 3+ mile typical range and interfaces via RS-232 Modbus RTU or Modbus-TCP (Ethernet).

The HL4200 also features Columbia’s Smart Diagnostics for feedback related to fault detection and an optional video playback to assist the operator in identifying the cause of a machine stoppage.

Digital Transformation Awareness & Consulting CNC and Brownfield Connectivity Services are part of Digital Motion Control Services, which enable Siemens to support its customers on the path toward digitalization.

Like the Field Xpert SMT70 (Class 1 Div 2 rated), the Field Xpert SMT77 supports HART, PROFIBUS DP/PA, Foundation Fieldbus, Modbus, CDI and Endress+Hauser service interfaces.

Suitable for use in tanks, vessels, and pipes, the VFL series is an alternative for applications where other liquid point level technologies such as float switches or conductive, optical and capacitance sensors are not suitable due to conductivity, turbulence, buildup, air bubbles, foam, pressure, temperature, and viscosity changes.

The SENATOR has the ability to measure distance, level and volume of liquids, solids, corrosives, powders, granulates, rocks, pastes, and hygienic liquids.

These air operated conveyors are available with smooth ends, to fit into hose or tube and secured with a simple hose clamp or they are available with NPT threaded ends, to mount onto threaded pipe. They feature large throat diameters for maximum throughput capability.

Plant Applications 8.0 works to help manufacturers leverage real-time production data to optimize operations and is an enterprise scale MES that supports discrete, process and multi-modal manufacturing.

The 3418 is an ultrasonic flow meter to pass all perturbation tests for OIML R-137 Accuracy Class 0.5 with five pipe diameters in front of the meter and without a flow conditioner.

The Micro-Latch 2.00mm Wire-to-Board Connector System offers two to 15 single-row plug-in circuits, with both vertical and horizontal configurations; through-hole terminals; a 2.00mm-pitch low-profile connector

Flirtey’s system is designed to safely get packages to customers with the delivery goal of less than 10 minutes using drones.

Balluff’s U-890 Ultra High Frequency (UHF) handheld RFID reader works to simplify mobile data collection.

The NCA-6210’s NIC expansion slots and compatibility with F.A.S.T. module solutions make it a hardware solution for application delivery, mobile edge computing, WAN optimization, DPI/IPS/IDS, NFV/SDN and NGFW/UTM.

As a "digital native", the controller features software for the creation of corresponding digital twins. A range of technology functions are intended to help improve processing speed, contour accuracy and processing quality.

The ADT761A features: increased pressure range to 1,000 psi (70 bar), removable internal pressure modules, optional precision models to 0.01%FS, increased speed to pressure, ability to read two external pressure modules, touch screen display, WiFi, Bluetooth, and Ethernet communications and double the original battery life.

The Data Science WhisperStation marries NVIDIA GPU-accelerated performance with a complete pre-loaded data science software stack. These custom systems feature either 2 or 4 NVIDIA Quadro RTX 8000 or 6000 GPUs for performance insight

SintoGrind TC-X 630 is designed for flute grinding, profile grinding, and outside and inside diameter grinding. SintoGrind TC-X 630 works on a variety of materials including tungsten carbide, HSS, PCD, CBN, cermet and ceramics.

The Lock 150 can be installed in less than five minutes without the need for software installations, network configurations or special IT skills, and provides capacity for up to 10 concurrent VPN connections.

Three separate systems are available, specifically designed for high pressure, low temperature, and high temperature conditions. The Extreme Environment sensors and systems work in operating temperatures ranging from -320°F to +1000°F (+1200°F short term).

This “YK400XE” is a successor model of the conventional model “YK400XR”. The maximum payload is 4 kg that is 1.4 times larger than the conventional modeland the standard cycle time is reduced approx. 10% to achieve 0.41 sec.

HPS Sentinel G ventilated stand-up distribution transformers are designed to meet federally mandated energy efficiency standards as outlined by DOE 2016 and NRCan 2019 requirements.

The stage utilizes a custom design that utilizes a unique electromagnetic circuit design. This design allows for a minimal cross section of 1.20 inches [30.5 mm] by 1.00 inches [25.4 mm].

CrateDB is a distributed SQL database based on a NoSQL architecture that uses SQL for processing any structured or unstructured data type.

Powered by the 8th Gen Intel Core U-Series (Whiskey Lake) platform, EMBC-3000 and SPC-5200 feature system-oriented integration and industrial-grade reliability, aiming at embedded solutions for Intelligent control, machine vision, In-vehicle computing, factory automation, gaming, AGV/AGR and any Industrial 4.0 and AIoT applications.

The CALM solution provides capital program management capabilities as well as a simulation-driven approach to design, construction, and operations. By leveraging these simulation and optimization technologies, capital program stakeholders can initially monitor, then improve, their assets’ performance.

The CPU Card delivers performance with intelligent security and hardware monitoring features for real-time applications in process control, surveillance or imaging in the field of automation, transportation, medical technology and digital surveillance markets.

This triple-redundant architecture, is intended to meet the performance, reliability and cost requirements of the automotive market including the areas of Autonomous Vehicles, Self-Driving Taxis/Delivery Vehicles. ADAS Systems, Electronic Stability Control, Lane Keep Assist applications, etc.

Xcelerator combines the full portfolio of Siemens’ software for design, engineering and manufacturing with an expanded Mendix low-code, multi-experience application development platform.

The TEQ 40WIR are a series of isolated railway DC/DC-converter modules with 4:1 input voltage ranges. The series is comprised of 21 models offering 9.5-36 / 18-75 / 43-160 V input ranges and outputs of 5 / 12 / 15 / 24 / ±12 / ±15 / ±24 VDC.

Balluff's EtherNet/IP IO-Link master block insulates against inductive, conductive, and capacitive noise produced by electromagnetic interference (EMI) and its housing protects against welding environments.

A white-box vCPE appliance such as Lanner’s NCA-5220 monitors the performance in QoS and QoE over regional, national and global virtual enterprise networks but also monitors packet information in both current and historical data, including all the traffic from apps, network protocols, VPN-to-edge, cloud services and office Wi-Fi, enabling network diagnosis and troubleshooting.

Point Precision includes all 6 degrees of freedom of errors of each axis in motion, guaranteeing the precision point in the full work envelop. Point Precision allows for a “precision number” to be quoted based on an exact point and is used for many applications from laser processing to metrology.

BISTel plans to demo the solution with auto, pharma and biotech customers around the country next month. BISTel plans to demonstrate the new health monitoring and predictive maintenance solution around the USA beginning September 16, 2019.

The USB705x family enables device charging and introduces PD implementations called HostFlexing and PDBalancing. The UPD301A is a standalone USB Type-C PD controller that is designed to simplifies the implementation of basic USB Type-C PD charging functionality, making it suitable for applications from rear seat charging in vehicles to portable equipment to public charging stations.

The Type FA10 Coalescing Filter is specifically designed to remove liquid aerosols and sub-micron particles from compressed air. The Type FA12 Filter Regulator with Coalescing Filter combines the coalescing filter with a filter regulator in a piggy-back assembly.

Treon Industrial Node is a battery-operated condition monitoring device that measures tri-axial vibration and surface temperature of rotating equipment, such as pumps, motors and agitators

The motion of this brushless GVCM-095-089-03 Linear Voice Coil Motor is ideal for: Clamping, work holding, sorting equipment, assembly, medical devices, antenna positioning, testing, slide actuators, shutters, doors, valve actuation, wafer handling, and optical focusing.

These skids fully integrate UPS DC power, solar charging, generator interaction, motor controls, SCADA, power distribution (DC and AC), and data harvesting via IIoT or SCADA topologies.

The advantages of ZrO2 ceramic balls are: FDA/USDA/3A Dairy/Caustic washdown compliant, lighter than steel balls and can be used at extreme RPMs.

The standard system configuration contains 128GB of SSD storage, 4GB of DDR 4 memory, expandable to 32GB, and an 84W power adaptor. Expansion ports consist of a Mini PCI-E and an M.2 (M Key:2280) socket. Three reserved antenna holes are available for optional wireless connectivity.

Equipped with Schneider Electric's EcoStruxure Asset Advisor, the ATV6000 provides a solution to optimize the operation and maintenance of installations. It allows businesses to plug into the Industrial Internet of Things to manage maintenance tasks on assets with preventive and predictive management based on real-time assessments and predictive analytics.

They can alter voltage levels, amplify voltage at the end of long cables, or enable the creation of independent supply systems by means of electrical isolation.

The VDC-XXT 450kW system is in a 30” W x 30” D chassis as VYCON’s 300kW rated VDC-XXE model. It has the capability of operating at temperatures of up to 104°F (40°C) with a 20-year operational life.

In order to meet the requirements of the upstream and midstream oil and gas industry, the embedded edge computing platforms are designed for extended temperature ranges, with optional conformal coating to protect against the effects of salt water or condensation caused by large temperature fluctuations.

This receptacle with disconnect switch provides a secure power connection for portable or stationary electrical equipment in flammable locations.

Developers working with DAQ and PXI modules may immediately begin work with MAPS software packages such as ADLINK Connection Explorer (ACE), diagnostic tools, and testing utilities to analyze device functionality in one click.

The XYR-01-01 and XYR-01-02 Alignment Stages feature linear resolutions of the X and Y axis of 0.25µ(micro-steps per step motor driver in use); the repeatability of each is 1.5µ, positional accuracy is 5µ, and backlash is 2µ.

The complete product offering comes with the UR10e cobot arm, cloud connector, welder, wire feeder, MIG welding gun, weld table, and configurable user-input touch buttons.

This Intel Coffee Lake-based motherboard provides rapid video acceleration advantage, multiple expansion interfaces and triple-view capability. It is suitable for a range of embedded applications such as industrial automation, transportation, self-service kiosks, medical, and digital signage.

From the electrical variables of a permanent magnet synchronous motor, the Safe Speed Observer calculates two redundant models of the motor – achieving a safety level for the calculated speed. The virtual sensor can be used for both linear and rotary synchronous motors.

The plastic clamps can be attached to the arm of the robot by a screw connection. The triflex R is attached to the clamp by a clip and fixed. The clamps are suitable for cobots from Universal Robots, TMS and Kuka LBR iiwa robot arms.

UtiliTrak is constructed with DualVee Motion Technology in vee and vee/crown designs, and using MadeWell Crown Rollers, and are designed for commercial applications.

Primarily designed to improve machining by eliminating tool head vibration, the system further helps maximize material removal rate (MRR) and can also provide real-time feedback for predictive maintenance purposes.