Industry Products

The three FLEX 5000 safety I/O modules provide distributed safety I/O for the Allen-Bradley Compact GuardLogix 5380 and GuardLogix 5580 controllers. The safety modules can be combined with FLEX 5000 standard I/O modules to achieve integrated safety and control in one distributed I/O platform.

The TSM14POE StepSERVO Integrated Motor with PoE technology offers a motion control solution with a motor, encoder, drive, and controller combined in a single integrated motor package.

Each slice offers a clip-in mounting system, while status LEDs help with visual diagnostics. It has a width of 11.5 mm, allowing for larger systems to be wired into a smaller panel, up to 64 modules can be connected per row.

Available in a range of frame sizes (60–176 mm), NdFeB-based brushless servo motors include incremental encoders for position feedback and electrical commutation.

This toxic gas transmitter is equipped with a remote sensor that offers operators a sensor response testing system for hazardous locations. This unit is fitted with a hydrocarbon sensor that detects 0-200 ppm and is made with a cast aluminum housing.

The 15 and 20 watt models feature 5,940 VDC I/O isolation / 8,000 VDC peak isolation up to one second in a 2.00 x 1.00” footprint. All models feature a 1,000 VAC working voltage and common mode transient immunity (dv/dt) of 15kV/μs.

Outputting in LAB format, the camera providesdetection of color flaws directly within the production process, and expands the options for designers of color linescan systems.

The series of Industrial Workbenches is called the AT series and is available with a number of options including levelling pedestal feet as standard, lockable rollers, a lower storage shelf and a T slot rear wall for storage and additional fixturing possibilities.

The solid-state controlled ANVER VLS‑09 Vacuum Leakage Sensor sets itself to a system’s peak vacuum level, compensated for altitude and atmospheric pressure, and displays it on a color LCD.

The Forte Series combines fluid dispensing with increased throughput and productivity to handle applications such as flex circuit and printed circuit board assembly, electro-mechanical assembly, MEMS, underfill, precise coating, and encapsulation.

By eliminating multiplexers, organizations can use AMS Device Manager to configure, calibrate, validate, and document more of their HART-enabled field devices and systems.

The Express-SL2/KL2 features the 6th/7th Gen Intel Core Processors (as well as Celeron and Xeon options) and supports the Type 2 pinout with legacy interfaces such as PCI-bus, PATA, and VGA.

Rockwell Automation has added simulation and trending features and expanded the number of devices that the design-and-configuration software supports to speed up development.

The BOXER-8170AI supports a maximum output of 60 watts for up to four PoE cameras, suitable for a range of AI solutions incorporating PoE cameras such as smart retail, virtual fences, and access control.

These connectors are designed for use in data centers, industrial/manufacturing automation cabling, institutional applications, office networks and PoE+ applications.

Jitter and eye diagram analysis works with existing histogram and precision measurement functions to help characterize signal quality in real-time making the MSO8000 a debug solution for serial data integrity.

Powered by a 6th/7th generation Intel Core i socket-type (LGA1151) processor with Intel Q170/H110 chipset, equipped with 2/4 PCIe/PCI slots for integrating add-on cards, and compatible with Microsoft Windows 7/10 operating systems, IPC-220/240 provides the system for traditional legacy control operations and industrial automation applications.

The Ethernet Direct Layer 3 switches are a combination of technologies in hardware and software engineering to adapt to harsh industrial environments.

These inductive couplers (BIC0073, BIC0074, BIC0075, and BIC0076) eliminate the need for mechanical slip rings. Their IP67 rating allows them to stand up to harsh environments, including oil and water, and internal temperature monitoring keeps them from overheating.

Fabricated from GRP (glassfiber reinforced polyester) materials, the enclosures provide dust- and water-proof environments to protect remote control equipment located deep inside processing areas.

These typically include, but are not limited to, radial vibration, axial position, and bearing temperature measurements commonly encountered in machinery protection systems on pumps, motors, compressors, turbines, and other critical rotating and reciprocating machinery.

The MM-L300A is designed to detect production errors such as gaps between parts, missing parts, over-penetration, incorrect focus, and cover gas absence, providing operators feedback on laser weld quality. The unit supports laser welding technologies for spot or seam welds.

The fully enclosed graphic terminal is a prepackaged solution that can be ordered with integrated I/O and push buttons.

This module integrates an antenna capable of a 3-mile range, which allows a pair of modules to communicate in a point-to-point mode or modules can communicate directly to a SignalFire Gateway.

The SRMW-19U-24 offers VGA, HDMI and Composite BNC inputs. It has the unique ability to Auto Re-Start after any power loss. It will operate on 12-24 VDC, or 120-240 VAC.

Antaira Technologies’ LMP-2004G-SFP and LMX-2004G-SFP series are industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

Durably designed, the L10 tablet is portable with a 10.1-inch screen and the ability to withstand a six-foot drop to plywood. Its ingress protection IP65 rating ensures it is virtually dust and waterproof.

The black Thermoplastic Elastomer (TPE) cable outer jacket is flexible and resistant to sunlight, oil, and moisture penetration; making the cables suitable for wet and dry indoor and outdoor locations.

Your hunt for FDT consultation services stops here! Talk to Utthunga…

New OPC UA plug-in empowers PACTware users with IIoT solutions

Get more from your HART devices with our NEW I/O DTMs

With the DXF Overlay app from TAGARNO, users can import DXF files to their TAGARNO digital microscope. The file will appear as an overlay and an overview will show where the overlay is positioned in the field of view.

Abaco’s Thunderbolt 3 design extends the functionality of existing test systems without adding more slots. It also delivers portability for test and simulation users and for flight-line use. Typical applications include bus analysis/simulation, system integration activities, and flight-line including 615-3 data loading and MRO (Maintenance,Repair andOverhaul).

The touch panel PC has a full IP65-rated aluminum front bezel for protection from water and dust ingress and features class 5M3 (EN 60721-3-5) and MIL-STD 810F certification for vibration and shock tolerance.

This solution was engineered with lower hardware requirements so it can reside in devices or be integrated directly into a larger mechanical or electrical system

From power supplies, fans, controllers, to main boards, Lanner HybridTCA solutions adopt modular designs to provide technical support and RMA services

The STRIDE MQTT gateway provides hardware setup to add Modbus RTU/TCP devices to an existing MQTT cloud data collection platform. The MQTT gateway interfaces with up to 32 Modbus devices; wired and Wi-Fi gateway models are available.

More than 350 standard ATS heat pipes provide cooling solutions for cloud and edge computing, electric vehicles, aerospace, agtech, robotics, medical and consumer electronics, data communications, telecommunications, HVAC and more.

Standard Air Wipes are CE compliant and available from stock in aluminum in diameters from 3/8″ (13mm) up to 11″ (279mm). Applications include wiping wire; drying inks; cooling hot extruded shapes; and blowoff of water, plating, coatings and dust..

Marktech’s Models MTPD1346D-200 and MTPD1346D-300 are available in active area sizes of 2.0 mm and 3.0 mm, respectively, joining existing series InGaAs PIN photodiodes with 0.1 to 1.5 mm active areas.

ABB’s UNITROL 1000 series is an excitation product that is fully compliant with the European grid code pioneered in Germany. Compliance of ABB UNITROL 1000 devices to the German grid code (VDE-AR-N 4110 and VDE-AR-N 4120) has been validated by the TÜV NORD certification body.

The DGST slide and yoke plate are machined from a single piece of aluminum. Backlash free piston rod/yoke connection contributes to the slide. Twin piston drives and recirculating ball bearing guides provide the DGST with power– from 7.6 to 132.6 lbf (34 to 590 N) at 6 bar.

The system, called micro flizz, can be used with igus’ smart CF.D system, which monitors the data transmission characteristics of the cable in advance and promptly warns of a failure.

The enhancements are intended to help companies to increase user adoption and capture the critical data insights that are essential to continuous improvement.

The Antaira management software on these switches helps monitor, react, and troubleshoot applications. Features such as SNMP Traps, Syslog, and port mirroring can help maintain a system.

The PSRswitch offers an RFID non-contact safety door switch system with M12 connections. The safety switch can be connected in a series with Y distributors, bridge plugs, and SAC cabling.

The small portable device can scan color on any object. It then links to a Color Sensor app which provides the paint color match.

Fluke is adding condition monitoring data to IBM Maximo with Integrated Condition Monitoring for Maximo, a solution that incorporates real-time asset data within existing IBM Maximo workflows.

The embedded CSB200-818 houses a 3.5-inch single board computer powered by an Intel Atom processor E3930, N4200 or N3350 and is equipped with 4GB (default) of DDR3L-1866 system memory that is upgradeable to 8GB.

This 2-watt unit operates on 30V DC and provides 200k ohm resistance. This device is used to support vehicle steering systems.

Marktech Model MTE6063M-UHR visible red LED emitters offer output power, typically 27.5 mW, along with a radiation pattern, and a peak emission wavelength of 630 nm.

These capacitive sensors are suitable for detecting the presence of solids, but are equally good at detecting material or liquids like granulates, sugar, oil, and aqueous media through a nonmetal wall, such as packaging, glass or plastic, with a maximum thickness of 4 mm.

Common applications include maintenance and troubleshooting of gauges, switches, transmitters, transducers, valves, gas meters, flow computers, pumps, and filters. The HPC50 can also replace a deadweight tester.

The Unified Operations Center is a central hub that transforms the control room into a collaborative workspace. Functional silos are broken down by contextualizing operational and business data to enable teams to make better decisions based on accurate, real-time information.

EVT’s Label Alignment and Position Inspector checks the position and the alignment of the previously defined label. The parameters are defined by the user. Afterwards the inspection can be applied immediately to the production process.

HEMCO ModuLab is a custom-designed room enclosure with control systems that meet a variety of environmental and class clean requirements. ModuLab is a choice for industrial applications such as Powder Coating, Food Processing, Seed Production, Mining, and Bulk Solids Handling.

The series is comprised of 18 models offering 9-36 / 18-75 / 43-160 V input ranges and outputs of 5 / 12 / 15 / 24 / ±12 / ±15 VDC.

A tricolor version is available as an alternative, combining the colors, red, yellow and green in the one beacon. The beacon can be actuated via either acable connection or a pre-assembled M12 plug – for plug & play

The design allows users to receive the drive in one shipment with secondary windings already connected. In addition, no rear access is required=.

The IBR210 3.5-inch single board computer features NXP’s dual or quad core Arm Cortex-A53 i.MX 8 processors in 1.3GHz and 1.5GHz CPU frequencies

The effective decoupling of camera image capture from the USB communication allows multiple FRAMEsafe cameras to be used on the same host processor without losing the frames from any camera.

Diamond plate safety mats, are available in 24 x 36 and 24 x 48-inch sizes with a diamond plate aluminum surface designed for heavy industry applications, steel wheel carts and similar equipment; and can survive welding debris, hot parts, metal chips and foundry splatter.

With its IP67 rating and the chemical resistance of the housing in conjunction with a temperature range of -50 - 500 ° C, the CT13 infrared radiation thermometer has a diamond window and a PVDF flange

The CA80HA colorimetric analyzer uses the phthalein purple method, for direct comparability to lab results. It measures calcium carbonate (CaCO3) over a range of 0 to 80 mg/l with accuracy of ±0.5 mg/l.

The ProSense conditioners operate on 21.6 to 253 VAC or 19.2 to 300 VDC supply voltage and provide 3-way isolation between input, output and power.

In field trials, Falkonry LRS 2.0 has provided performance, visualization and scale, enabling customers to realize improvements in the uptime, quality, safety and yield of their industrial operations.

The NVP2000 is designed to deliver gains in SIGINT, radar and video or graphics processing applications, while its degree of parallelism also makes it a fit for GPGPU applications including machine learning and autonomy.

The MPU-240S family is packaged in a 6” x 4.18” x 1.38” U-Chassis. Three I/O connector types are available for all models, terminal blocks, Molex, or clamp blocks.

The AZV9010 and AZV9020 Z-Axis Stages are constructed of black-anodized aluminum alloy and weighs 1.85 kg (4.978 lbs), and 1.95 kg (4.299 lbs).

The modules provide local, in-chassis safety I/O for GuardLogix 5580 controllers, eliminating the need for adapters that require panel space and additional configuration time. If desired, the modules can also be used for distributed safety I/O.

Antaira Technologies’ LMP-1600G and LMX-1600G series are industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

The system allows to inspect component parts in different positions and rotations, which means that it is not necessary to position the component parts in an exactly defined rotation.

Falcon’s SSG-RP-1H is an extreme-temperature online UPS with features specifically designed for applications in harsh environments that are subjected to heat, dirt, dust, moisture, etc.

Together these board kits provide developers a way to build a system designed for the needs of their project, whether it’s a networking device, or an AI Edge system.

The DZRALTE Series are digital servo drives that control brushed & brushless servomotors in embedded applications. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM)

The TX700’s all-glass capacitive touch display provides operation with gesture control similar to that used in smartphones.

On the input side, the module can be used for isolating four-wire powered devices, or for powering and repeating the signal of two-wire field devices. The two outputs are isolated 1:1, 4-20 mA with the HART communications signal intact.

The SI-30S supports the AMD Ryzen 3000 Series processors with a base clock speed of up to 3.8GHz and 32MB of L3 cache memory that features multi-core performance when compared to its predecessor.

High-vacuum resistance style limit switches with 3-micron repeat accuracy are a choice for installations inside a vacuum, such as environmentally controlled manufacturing processes.

The collaboration between Antmicro and Allied Vision in the embedded software domain was since extended to cover the entire NVIDIA Jetson series including the Jetson Nano board, as well as multiple platforms from NXP.

Introducing a new addition to the size 21.21 metal housings from ILME! The new MKAX-IF bulkhead mounting base is designed for ease of installation with the convenience of a round mounting thread.

The service of the AI ​​specialist enables the users to access new functions. Surface textures from over 5,000 texture patterns are available. The textures open up possibilities, for example for components such as interior trim in automotive design.

ODVA conformant servo drives, stepper drives, and integrated motors perform their specific positioning, velocity and other motion control tasks while simultaneously exchanging control, I/O and diagnostic data with controllers on the EtherNet/IP network.

The new “LSX” models undergo a screening process to ensure they meet higher standards for dust/FOD suppression.

The PICO51R is designed as a platform for industrial automation applications requiring a small form factor to fit in space-limited environments.

OptiPMD's design and size makes it suitable for mobile lab applications. It also includes safety standards including an optical flame detector, a built-in fire suppression system, and quality control functions, which allow users to enter specification limits by product.

The module provides CIP Security capabilities to ControlLogix systems. And when combined with the ControlLogix 5580 controller and the Kinetix 5700 drive, it allows a CIP Security zone to be created.

The Factory Console provides factory or production managers with an overview, while the Machine Console and Line Console visualize detailed KPI information for process engineers and operators. In addition to real-time views, the system can generate automatic reports from various aspects.

Included in the kit are adjustable mounting rails, a sealed connecting plate, splash guard and airflow regulator.

Functions have been added to the Automation Design Suite (AD Suite) integrated engineering environment to improve engineering efficiency.

Their robotics approach is initiating access to the robotics world through optional actuators. They developed 2 sizes of motors and drive modules in the robotic arm. This modular design allows to reduce SKUs in volume manufacturing and reduce production.

By tunneling HART traffic over SignalFire’s proven 900MHz platform, the Link Scout allows maintenance personnel to configure, calibrate and troubleshoot assets equipped with a HART-enabled instrument using DTM software.

Honeywell Forge Inspection Rounds is a mobile solution for field operations designed to improve technician operator rounds by enabling users to make informed, data-driven decisions.

The Series 813 M12 L-coded connector is a panel-mount connector with single wires. (Standard wire length is 200 mm; other lengths are available upon request.) The screw locking mechanism meets the IEC 61076-2-111 standard.

The MVR-SC eliminates the need to integrate VRF leak detection into a BAS controller. By implementing a hybrid Ethernet serial network the MVR-SC simplifies the Modbus integration

The program, which is digitally enabled, begins by understanding and defining specific key performance indicators. Honeywell experts then build and deliver a specific, measurable plan with agreed-upon service levels for each customer supported by automated workflows and triggers.

The XC2 includes safe torque off (STO), a data array consisting of over 4 million 32-bit elements, dedicated home and end-of-travel limit inputs, and an enhanced current sense device. Encoder support includes square-wave, sine-wave, and absolute encoders.

These transformers are open style units in ratings from 50VA up to 5000VA. Units from 50VA to 3000VA (30 amps) include molded terminal blocks.

The model NCC14-78-830-1SM can generate a continuous force of 92 pounds [410 N] and a peak force of 294 pounds [1300 N] at a duty cycle of 10% (i.e. 1 second on, and 9 seconds off). A moving mass of 4.4 lbs [1.97 kg] allows for a maximum theoretical continuous acceleration of more than 20 G’s.

The Smart Embedded Vision initiative provides a suite of FPGA offerings that includes IP, hardware and tools for machine vision designs across the industrial, medical, broadcast, automotive, aerospace and defense markets.

The SW-4000TL-10GE features the same 4K (4096 pixels) line resolution and the same 66 kHz line rate for 24-bit non-interpolated RGB output as the original SW-4000TL-PMCL model.

The employee filtering feature uses a combination of Bluetooth Low Energy (BLE) technology and employee-worn tags to automatically identify and remove staff from customer counts, a process that can otherwise be manual or missing in retail environments today.

With measurement ranges of ± 0.04 to ± 2 inches, the gage heads operate over anoperating temperature range of 65°F to 185°F while performing at a linearity ±0.15% of full range.

The NCS2-MINIPCIE02 is a PTCRB-certified Wi-Fi/3G/4G/LTE NIC module suited for operators and device manufacturers located in regions where PTCRB interoperability/compatibility (cat-3 & cat-6) is a requirement.

The ET976 Computer-on-Modules are currently available with a scalable selection of AMD Ryzen SoCs including V120B, V1605B, and V1807B along with Radeon Vega 3 graphics.

The combination of Linxa’s architecture and processing power offers efficient near to real time reporting allowing management total awareness and control of their wholesale business. There is no limit to call capacity due to unlimited scalability and distribution functionality.

These laser sensors’ different detection and processing modes enable detection of complex-shaped objects. While their enhanced background suppression capability allows them to detect and measure dark and transparent objects, such as plastic film or products.

Users can back up the current state of their custom HMI applications to avoid rebuilding them in the event of a system failure or disaster, minimizing downtime in the production system

By updating the technology and optimizing the storage system, the software has been upgraded from 400 to up to 150,000 value changes per second. Runtime performance is now unaffected when archiving large amounts of data.

The AG-LC Series has a solid-core housing design that provides aspace for multiple conductors to pass through one sensing window.

With the addition of sensors for carbon monoxide and oxygen depletion detection, these monitors can now be used for other applications, or additional gas monitors can be deployed. When and if process conditions change, monitors can be moved as necessary, so long as they are placed within the coverage area of the WirelessHART network.

The packages span the full source-to-pay process for all spend categories including direct materials, MRO, assets and tooling and indirect goods and services.

SurveilsQUAD (e-CAM20_CUXVR) is a multiple camera solution that consists of four 2MP camera board and a base board to interface with the NVIDIA Jetson AGX Xavier Developer Kit.

The wireless meter features a configurable frequency measurement range from 0.4 Hz to 4800 Hz (24 RPM to 288,000 RPM).

The TS3 sensor is an embedded sensor system that sends out ultrasound waves in a frequency range inaudible by humans.

The IP65-rated 7” widescreen touch panel PC, GOT107W-319, is suited for digital signage display, self-service kiosk, industrial control, IoT-related applications and more.

The Alvium camera series is a camera platform that combines the advantages of embedded sensor modules with the performance of industrial cameras for image processing.

The VersaVirtual appliance comes with one-year remote monitoring and administration so that users receive around-the-clock system monitoring.

The Pocket Portal has an RS-485/power port, input/output port, browser interface, and provides limited control with Modbus RTU write capability (up to 115.2k baud) and 3VDC discrete output logic.

The integration with ServiceNow provides an out-of-the-box configuration which allows notifications from Opsview Monitor to be opened automatically as ServiceNow incidents.

Beckhoff will showcase a lineup of updated automation hardware, software and gigabit communication via EtherCAT G for packaging machinery during the trade show, which runs September 23 – 25, 2019, and is expected to draw 30,000 attendees.

By including electromagnetic simulation into Simcenter 3D, engineers can take advantage of the integrated environment to perform electromagnetic simulation and streamline multiphysics workflows between electromagnetic and other physical simulations.

Fiber is most commonly associated with long distance connections. This technology is intended to enhance network with additional bandwidth capacity, and can carry multiple signals concurrently, protecting data from noise and interference without electromagnetic emissions.

The GO-5100MP-PGE is equipped with a standard GigE Vision interface and, just like JAI’s GO-5100MP-USB with a USB3 Vision interface, the camera is built around Sony’s IMX250MZR polarized CMOS image sensor.

New integration between AMS Machinery Manager and the Plantweb Optics asset performance platform enables automated workflows.

The CK Atronik control module houses a reversing contactor starter with mechanical and electrical interlocking, a Rotork design for electric actuation. Connection to a suitable power supply is all that is required for local operation of the actuator.

The 1 micron resolution HCDS-051-032-013-01-B1-01 Voice Coil Stage features cross roller linear bearings whereas the 30 micron HCDS-051-032-013-01-B1-30 Voice Coil Stage uses linear ball bearings.

Yamaha’s SCARA robots are designed for noise immunity and reliability by eliminating the effects of contamination such as dust or grease that exist in industrial environments.

Petuum Industrial AI Autopilot is integrated with OSIsoft’s PI Web API, PI connectors and interfaces, PI Vision, PI Asset Framework and Asset Analytics. OSIsoft Cloud connect enables real-time inference and learning on streaming data.

This online plant noise surveillance system employs wireless technology and explosion-proof sensors. Even in plants where noise levels change drastically over time, noise mapping can be applied to plan work schedules that will ensure workers do not exceed specified limits for number of work hours in a noisy environment.

INJ PoE Injectors are designed to provide up to 60W of IEEE802.3bt compliant power over Ethernet cabling to connected devices such as wireless access points, pan-tilt-zoom (PTZ) cameras and video phones.

The dual encoders are incorporated in essentially the same package size as the FHA-C mini single incremental encoder version. The dual absolute encoder offers single turn absolute position at the output, without the need for battery back-up.

This integrated and tested hardware/software solution combines Lanner compute; and networking COTS platforms pre-configurated with ADVA’s Ensemble Connector virtualization platform.

The TEL10 series of 10 watt DC/DC converters in the DIP-16 package measure 0.94 x 0.54 x 0.31”, and the series is designed for 10 watt power density with 3.83 W/cm3.

POSITAL’s absolute kit encoders are available with multi-turn measurement ranges, which can be useful when a motor is connected to a screw shaft, cable drum or gear reduction system.

The TD family of touch controllers features a differential mutual signal acquisition method that increases the Signal-to-Noise Ratio (SNR).

These modules work to simplify installations by eliminating analog in-chassis interface boards and reducing additional analog network blocks. IO-Link lets users replace lengthy shielded cable runs with basic unshielded cables.

Slim interface relays are suited for use with PLC automation systems, electric power plants, energy management systems, voltage panels, industrial machines and other power and sequencing control applications.

Named Ganymede, the platform is scalable and focuses on IoT/ICS/OT-specific threat intelligence for industrial and critical infrastructure organizations. Ganymede also incorporates an IoT/ICS/OT-specific malware analysis sandbox.

The eBOX671-521-FL with GPU computing performance is powered by the 8th gen Intel Core i7/i5/i3 (Coffee Lake-S) processor with up to six-core, Intel Pentium processor, or Intel Celeron processor and comes with Intel Q370 or optional Intel C246 chipset.

Each buffer is a complement to chipsets where distributed clocks are required across several peripheral components, such as Central Processing Units (CPUs), Field Programmable Gate Arrays (FPGAs) and Physical layers (PHYs) in data center servers and storage devices, along with many other PCIe applications.

The U-723 XY stage provides 0.8” travel per axis, with a footprint of 42x42mm (1.6x1.6”). Its profile of 21mm (~0.8”) and design allows for integration into tight spaces. In addition to high resolution (10 nanometer linear encoders) it provides motion up to 200 mm/sec and rapid step/settle performance.

The Bulk Bag Packaging Systems include adjustable upper frame to accommodate square and rectangular containers. Heavy duty weighing controls are built to withstand the rigors of industrial use. Weighing control systems offer a host of process and weighing control functions.

CK2 series 18mm capacitive sensors with IP65/IP67/IP69K ratings provide an unshielded sensing distance of up to 15mm.

Based on the Qualcomm 9205 LTE modem and featuring optional 2G fallback, the modules also provide a future-proof foundation for IoT deployments that span legacy networks, 4G and 5G.

The UXT is particularly suited to process weighing systems using suspended vessels or tanks. Other common uses include lifting applications such as crane scales, and medical applications such a patient hoist.

NIR spectrometers analyze thousands of samples daily, providing data in support of a variety of production and laboratory requirements.

With maximum input voltage of 61V, the A7987 can operate from a 24V battery in a conventional or hybrid/electric vehicle and maintain a regulated output despite disturbances such as load-dump.

The SCA5618 is available in three lengths and with two different windings. Depending on length, the holding torque of this stepper motor is 0.6 to 2.3 Ncm; it has a resolution of 1.8°.

Inverted cable connectors and couplings ensure cable-to-cable connections in building, industrial, and outdoor applications. Modular basic housings and contact inserts also make angled conductor outlets possible for the first time.

Eight analog input and combination analog I/O modules are available. 16-channel current input (0-20 mA / 4-20 mA) and 16-channel voltage input (+/- 10VDC, +/- 5VDC, 0-5 VDC, 0-10 VDC) modules provide higher density analog I/O.

As standard the Scratch Inspector is available in three different illumination variations. Depending on the requirements, the illuminations can be adapted to the different sizes of the component parts.

Hot Tap Digital Flowmeters incorporate two valves that the measuring probes pass through. A sound muffler that also collects chips from the drilling process works to eliminate installation debris from entering the airstream and minimize noise exposure.

The Kinetix 5700 regenerative bus supply regenerates excess energy, putting it back on the facility’s grid or making it available for plantwide use. The Kinetix 5700 large frame drive is designed for machines with large axis counts and higher power requirements. An added large-frame inverter extends the power capability up to 112 kW.

The cameras and BVS Cockpit software provide vision tools and functions to control and monitor all aspects of machine vision systems. All the functions to set up and operate the cameras are in the BVS Cockpit user interface, which can be accessed from any common web browser connected to the local network.

An integrated linear encoder combined with stage calibration provides high accuracy positioning over the full travel of the device. Devices have low pitch, roll, yaw, and runout and a long lifetime.

Sectigo Private PKI enables enterprises to augment or replace their Microsoft Active Directory Services (Microsoft CA) by managing non-Microsoft devices and applications, including mobile, Internet of Things (IoT), email, cloud, and DevOps, all in a single platform.

The service package is tailored for Mitsubishi Electric’s M800 Series, but it also supports CNC products including the M600 Series.

The hermetic ceramic packaging provides radiation tolerance for TID (>100 krad orbit/mission dependent) and Single Event Effects (no latch up), while the universal package accommodates multiple density and data width options to enable board design, system integration and error correction implementation.

These products bring performance to industrial applications, features include: 24 / 48V outputs (-2% ~ +17% VADJ Range); high efficiency of 95%; 150% peak power for 4 seconds; packaged in a metal enclosure that is EN61373 qualified for railway shock and vibration.

The gateways enable EtherNet/IP controllers—such as CIP complaint controllers that support Class 1 and Class 3 connections, including PLCs, HMIs, SCADA systems, and OPC servers—to connect to Modbus master controllers.

The gateway has built-in 8-port Gigabit Ethernet with 4x10/100/1000Base-T(X) and 4xGigabit SFP Combo ports.

After decades of service from Kylie-Mueller’s GTB and GTW control valves, operators in the oil and gas and hydroelectric industries can replace the valves with OEM-manufactured substitutes.

The EyeVision HotGlue Inspector inspects if the glue has been applied to all adhesive joints and if the temperature of the glue at the joint is ranging inside the threshold.

Softing's Modbus to PROFIBUS Gateways mbGate PA, mbGate PB and mbGate DP enable the direct integration of PROFIBUS PA and DP segments into Modbus/TCP systems.

The VP430 is a 3U VPX COTS solution featuring the Xilinx ZU27DR RF system-on-chip (RFSoC) technology. It is also a dense analog FPGA DSP board, with eight ADC and DACsynchronized channels, and features the ability to synchronize multiple boards for even larger system applications.

Workstation-grade Intel Xeon/Core i7/i5/i3 (Kaby Lake/Skylake) processor running with advanced Intel C236 chipset and dual-channel DDR4 2133MHz ECC memory, up to 32GB capacity

The BOXER-8150AI features the NVIDIA Jetson TX2 CPU paired with 8GB LPDDR4 memory and 32GB eMMC storage onboard.

The sensor's convex membrane made of dense, dirt-repellent material prevents soiling and makes it resistant to biofouling. Ultrasonic welding of the membrane to the sensor cap ensures its integrity, preventing dilution of the electrolyte and thus a drift of the measuring signal.

The module provides a programmable input range on all analog Input channels, and the Digital Output can be set to output with short-circuit and overload protection. The PET-7H16M series also provides 4 kV ESD protection as well as 2500 VDC intra-module isolation.

The EPFDS-400A-3P explosion-proof fusible disconnect switch features two 3-inch NPT hubs on the top and one 0.5-inch NPT hub on the bottom for completing connections to the disconnect switch.

The programmable IDEA Motor integrates a brushless servo motor with an IDEADrive controller in a package designed to reduce design time, wiring needs, and cabinet space.

The most common applications for NewTek Radiation Resistant LVDTs include measuring the position of nuclear fuel rods, control rods, steam and control valves in nuclear power plants, missile fins, submarine valves and fins, as well as actuators and components of objects in space.

The NSR-PG-10-20-URe Precision Parallel Gripper takes advantage of the e-Series robots’ RS-485 digital communications interface

HMHD-II series Harmonic Gearing Reducer pursues the flat limit —Super Flat Hollow Shaft type— design. Compared with HMHS series, the axial length is only half.

A CPU, more power supplies, analog I/O modules and specialty I/O and PWM modules are now available for the P1000 PLC from AutomationDirect. The P1-550 CPU adds a fifth communications port that supports remote I/O for 16 GS series VFDs and 4 ProtosX Modbus TCP field I/O couplers.

The PRCP is rated for use in explosive atmosphere, zones 1, 2, 21, and 22. Patented seal technology protects against back flow and ensures reliable exhausting with no special components required. The PCRP series is available in sizes ¼" and ½" with G or NPT threads.

The device features four thermocouple (TC) inputs capable of measuring the most popular TC types including J, K, R, S, T, N, E, and B. Each channel type is selectable on a per-channel basis.

Honeywell Forge for Industrial collects and integrates information from a manufacturer’s operations, analyzes and helps determine the achievable optimal performance and augments it with predictive analytics to identify opportunities for improvement.

Solid Edge 2020 provides next generation technologies to enhance collaboration and fully digitalize the design-to-manufacturing process.

These Partial Extension Rails are Ideally suited for applications requiring smooth motion such as: Material handling, rail systems in trains, aircraft, ships, trucks, and autonomous vehicles, wafer handling, delicate parts transfer, assembly, testing, laser machining and drilling.

The MACH-ProZone is designed for a range of applications that include small to mid-sized roof top and heat pump applications, and small mechanical room applications.

These NS-Series NSF (National Sanitation Foundation) certified valves (from GC Valves) are a choice for food and beverage grade potable water applications.

The six foot conveyors provide additional options for customers that need extended length product transportation within their facilities.

By incorporating two M12 EtherNet/IP connectors instead of just one on each axis, the SWM24IP-3DE Integrated Stepper Motor and TXM24IP-IDG StepSERVO Integrated Motor support more efficient network topologies such as line networks and daisy-chain connections.

These all-in-one pump protection solutions are designed to keep pumping systems in process, firefighting, refinery, power and chemical applications modulating and running without cavitation or overheating

The BCON for MIPI interface combines the MIPI technology with standards and the features of the Machine Vision world. This approach utilizes the Qualcomm Spectra ISP.

Typical applications include machine tools, conveyors, packaging machines, batching machines, food and beverage equipment, pumps and fans.

OSIsoft Cloud Services (OCS) is a cloud-native, real-time data management system for unifying and augmenting critical operations data from across an organization to accelerate industrial analytics, data science initiatives, data sharing, and other digital transformation projects.

The SBC3511 offers a 40GigE data plane for alignment with the SOSA (Sensor Open Systems Architecture) 3U I/O-intensive SBC plug-in card profile.

The Intel Core-based SDM500L is optimized for digital signage, interactive flat panel displays, interactive touch computers, video walls, etc.

The Heavy Duty HEPA Vac is designed to move more material with less wear. It has been engineered to filter contaminants to HEPA requirements in dusty environments requiring frequent cleaning.

The LNP-0800-60-24 series’ unmanaged switches are designed for expanding the network on the outer edge. Four ports of IEEE 802.3bt 60W 4PPoE power gives users the flexibility to add intelligent devices the network, while still maintaining 4 ports of IEEE 802.3at PoE+ 30W power needed for traditional PoE edge devices.

Lanner has a portfolio of network platforms powered by the 2nd-Generation Intel Xeon Scalable processors, delivering network computing performance and ultra throughputs.

Designed for the needs of IoT embedded applications including amusement gaming, ATM/POS, medical imaging, and industrial control, these mini modules combine graphics and energy-efficient computing power to handle various tasks.

SoliTherm ComPact Series is UL listed and offered in both external and recessed models. Recessed models have a standard depth of 3.5 inches. Cooling capacities are from 1,230 to 13,650 BTU and operating temperature range is 68 to 131°F.

Experion PKS HIVE uses Honeywell’s LEAP project execution principles, software and networking to unchain control applications from physical equipment, and controllers from physical IO.

Siemens Opcenter integrates MOM capabilities including planning and scheduling, manufacturing execution, quality management, manufacturing intelligence and performance, and formulation, specification and laboratory management.

The HG5G-V 15” TFT-LCD screen features a resolution of 1024x768 pixels. Like all HMIs in the series, the HG5G-V offers brightness of 650 cd/m2 to deliver visibility, even in high-glare locations such as direct sunlight. Its backlight life rating is 100,000 hours minimum.

Together, MicroSCADA X and SDA500 are designed to help improve grid reliability and power quality by reducing outage time and supporting the fast restoration of the entire grid.