Industry Products

The 5 port 10/100MB LAN M12 ports offer 148,800pps for fast packet switching with store and forward technology. The M12 4-pin D-coded, female connectors feature auto negotiation speeds, full/half duplex mode, and auto MDI/MDI-X connections.

This addition means that the controller supports two industrial safety networks – CIP Safety and Safety over EtherCAT (FSoE). The controller is optimized to support applications in industries like automotive manufacturing and food factories.

The Actin SDK can be used with any type of industrial or collaborative robot or complex articulated mechanism in any type of application, including those in the industrial, medical, Oil & Gas, agricultural, and aerospace domains.

P1100 series accommodates I/O interfaces, including 2x Intel GbE LAN, 4x USB 3.0, 4x COM, and 8x Isolated DIO. The system also supports three independent displays running simultaneously and enables 4K/2K playback via DisplayPort.

The sensors feature normally open and normally closed outputs for integration into control systems. Multiple light sources — red light for setup or infrared light source for highly contaminated or environments with water or mist in the air — enables this sensor to be used in a multitude of applications.

The Quick Changer releases end-of-arm tools with a click and inserted tools are automatically positioned correctly with a repeatability of ±0.02 mm. The Quick Changer can be used on any robot arm, drone, or other equipment with an ISO-9409-1 flange.

PS series fork sensor additions include harsh duty U-frame sensors for food applications, L-frame or angled fork sensors for mounting situations, and fork sensors for liquid detection.

Various modules providing choices among motor types, gearboxes, ball screws or roller screws, and accessories allow for custom combinations of components ideally suited for an application.

The TwinCAT 3 IoT Communicator exchanges data using a publish/subscribe mechanism. Information is exchanged via a message broker that uses the standardized MQTT protocol and acts as a central messaging service in a cloud or local network.

his combination of packaging, temperature capabilities and choice of current ratings makes them suited for Internet of Things (IoT) applications that require compact design but don’t involve continuous high currents such as smart doorbells, thermostats, ceiling fans/lights, door locks, etc.

The switch offers 24 to 55VDC redundant power inputs through 4-pin M12 T-coded male connector. A total power of 180W is available for supplying up to eight IEEE 802.3af (PoE) & 802.3at (PoE+) devices.

The LENS 860 Hybrid CA system has an 860 x 600 x 610mm work envelope, is equipped with a hermetically-sealed build chamber that maintains oxygen and moisture levels below 10 ppm for processing reactive metals, such as Titanium.

The Hand Prompt Batching Station serves a range of industrial applications where the negative effects of time consuming and problematic manual batching needs to be eliminated.

The Promass A sensor system is mounted on a base plate that acts as a “shock absorber,” effectively shielding the Coriolis measurement from outside interference, e.g. from pipe vibrations.

Manufactured in volume, these Tecnotion Torque motors feature encapsulated windings and include two types of thermistors as standard features. Tecnotion offers motor sizes from 68mm to 160 mm diameters, to date, these motors will work with any servo drives.

The MAI602-M4D80 motion control system can be used in various factory production applications such as automated optical inspection, semiconductor wafer handling, packaging and material handling systems.

With its Siship BlueDrive, Siemens provides an environmentally friendly propulsion solution with emissions down as low as zero depending on the drive configuration.

The MEG series come with universal AC input from 90Vac to 264Vac and wide operating temperature of -20°C to +70°C (with full power up to 50°C).

The AGT's sensing window is large enough to monitor 100 amp circuits. It can also be used to measure and monitor any low-value AC circuit current by passing just one of the conductors through the sensing window.

Plug & Inspect powered systems provide full autonomy to the manufacturing plant: systems immediately self-adapt to any changes in the inspected object environment, such as changes in light conditions and object location or orientation.

The Bi-Directional DC/DC converter charges a low side (12V) battery during normal operation (buck mode) and charges or assists the high voltage (48V) battery in emergency situations (boost mode). It is packaged in an 9.45” x 5.366” x 0.725” mechanically enclosed package weighing 2.86 lbs.

The pumps are suited for use in industrial applications such as foundation repair, rail maintenance and concrete post-tensioning.

The TraceNet Genesis System gives access to comprehensive heat trace circuit information, including circuit performance history, fault analysis, and circuit drawings. Using this information, maintenance personnel can predict failures.

The NSR-PG-10-20 Precision Parallel Gripper is a smart gripper available for collaborative robots, including the UR3, UR5 and UR10 robots from Universal Robots (UR).

For high load applications, the customer can drive the system with a reducer/motor combination. Additionally, the gear-to-pinion reaction loads are fully supported so the servo motor shaft is not subjected to radial loading.

The distributed force array (DFA) sensor uses Peratech’s quantum tunnelling composite (QTC) technology to provide an array of single point sensors that can be used in conjunction with a position sensor (such as capacitive) to measure force and correlate it with position.

All EyeCheck 4000 Z cameras have a FPGA, DualCore ARM processor as well as a GigE interface with Power over Ethernet (PoE). The user also gets the IP core for using the FPGA. And in addition to the EyeVision library the cameras support also other libraries such as OpenCV.

The LinX M-Series is fully compatible with standard pneumatics accessories such as mounting plates, linear guides and couplings.

The measurement of compressed air flow lines with the FS10i Switch/Monitor can provide information to the equipment’s control system in order to optimize the air flow.

The 32 A per contact, 600 V power connector is constructed with 4+PE, 8 and 12 silver-plated crimp contacts.

The RST2228P offers Power-over-Ethernet, precision timing and network communication on a single network.

The GPL series is available in seven sizes with ratios from 36:1 to 200:1. Output options for the GPL series include a solid flanged output (GPL-F) and a hollow shaft flanged output (GPL-H).

The sensors, which include a stainless-steel housing, are resistant to aggressive cleaning agents, chemicals, coolants or other media and meet the requirements for packaging, food & beverage industries.

This Absolute Arm range retains many features of the previous generation of ROMER Absolute Arm. These include the proprietary Absolute Encoders and diagnostic reporting, as well as rotating grips and a counterweight system that facilitate movement and measurement.

This open protocol has been standardized under the ANSI/ASHRAE 135-2012 specification for interoperability among systems built by different manufacturers.

The relays can be manually tripped and a trip-free mechanism is also provided. Mounting base units (TZ1H26E) can be added to enable separate mounting of the relays.

The reading window of the PXV has been enlarged to approx. 120 x 80 mm, meaning that the Data Matrix code tape is always located within the sending range.

Whether for monitoring ongoing testing process, fault analysis, condition or temperature monitoring or energy monitoring, PS Web provides a solution for measurement and testing.

Whether externally plugged in to a display or built in, the smart display module is optimized for digital signage, interactive kiosks, point of sale (POS) and video walls.

The MCC 118 provides eight single-ended analog inputs with sample rates up to 100 kS/s for taking single point or waveform voltage measurements.

The machine vision camera will offer broader visual detection and characterization capabilities of material properties as well as improved performance over conventional monochrome sensors.

It can be calibrated to measure gases over a flow range from 0.04 to 559 SCFM (0.07 to 950 NCMH), depending on line size, which is useful in low-flow applications requiring small doses.

This hazardous location control station is constructed of sturdy aluminum with stainless steel parts for additional reliability. The station is NEMA 7 (C, D) and NEMA 9 (E, F, G) rated, and includes three pre-drilled and tapped operator holes with ¾-inch NPT hubs.

The Integrated Laser Alignment System (ILAS) of the GuardShield 450L-E provides multiple visible laser points that optimize setup with a touch of the ILAS symbol on the front window of the stick.

Using the MATLAB console or scripts it is possible to read online values directly from the control system and make them available for further calculations and evaluations

The cables are available with four unshielded (CF30 series) or four shielded (CF31 series) conductors in 16 AWG to 2 AWG sizes. Individual conductors are bare copper and stranded for flexing applications.

Sensors are available with diagnostics function that can be monitored with I/O Link supporting Industry 4.0 implementation and Smart Factory operations.

AMCI’s SMD E2 Series units come standard with EtherNet/IP, Modbus-TCP, and Profinet built in. The integrated web server facilitates simple network type selection and IP address configuration.

The adapter is the latest addition to the DFX RUGGEDrive Series of Secure Digital (SD) memory devices. It works to prevent accidental deletion or modification of recorded data without the need for a read/write switch.

The VCnano3D-Z-series embedded vision systems are designed for use in OEM applications. They contain a Xilinx Zynq SoC, which comprises a dual-core ARM processor and an FPGA.

The J1939 CAN bus option enables peer-to-peer or broadcast signaling and is a standard often found in commercial vehicle applications. J1939 is a software protocol associated with CAN bus and provides serial data communications between microprocessor systems connected through the bus.

Weighing under 400 lbs, the fixed bridge and moving table-type machine is light enough to be placed directly on existing workbenches and relocated without recalibration by a Hexagon engineer.

The intelligent overload protection in constant current mode makes the power supply suitable for battery charging applications

The Flexy edge gateway is designed to simplify the process of extracting real-time data from machines using serial and Ethernet communications protocols by offering I/O drivers for PLC manufacturers including Siemens, Allen Bradly, Mitsubishi, ABB and others.

This sensor features microwave sensors, which are known for high performance in unstable climates. The sensors send out waves, which are reflected by surrounding walls and objects.

Mitsubishi Electric’s portfolio of products and solutions include pre-configured diagnostic and maintenance screens, pre-configured operator screens and a pre-engineered application code library for designs. Pak/iQ is intended for bottling, pillowing and wrapping machines.

Driven by the company’s KLA05 Linear Actuator, the product requires AC or DC electrical power to operate, and allows for displacement or pressure control when additional sensors are used.

This device can monitor digital on/off status, actuate relay outputs, and transmit or receive 4–20 mA signals over distances up to 20 miles. The I/O signals can be mirrored at other stations in the wireless network or mapped to Modbus RTU for integration into a Modbus host system.

Ruggedized to meet IEC 60068-2-6 (Vibration), IEC 60068-2-27 (Shock), MIL-STD-810F (Thermal Shock) and UL 62368-1 approved extends the application base of these power supplies into industrial markets.

Based on a patented microelectromechanical system (MEMS) tunable vertical cavity surface emitting laser (VCSEL), these light sources include an active power control that maintains constant output power over the lifetime of the laser.

Applications for the AT20-300 Motorized Vertical Lift Stage include: Positioning of Flasks, stirrers, hotplates, and other lab equipment, testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research applications.

The drives operateat ambient temperatures from –30 °C to +60 °C. Torque fluctuations are minimal thanks to the special rotor design. This provides for torque synchronisation and a low noise level.

The Boundless Switching function supports extended desktops with up to eight monitors when two switches are daisy-chained, speeding up switching between computers.

NORD’s NSD TUPH surface conversion system is designed for many food and beverage industry applications, where drive technology is exposed to extreme ambient conditions and highly corrosive environments.

The 43” screen features 1920 x 1080 full HD resolution and over 2,500 nits of brightness. =5mm Anti-Reflective, impact-resistant safety glass (rated IK10) protects the screen from damage.

The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm). The hollow core allows for optics, illumination, laser beams, or cables to pass through.

This most recent release also included both features and enhancements made to the Aircuity Engineering Tool; the proprietary software used by engineers to design the Aircuity system.

Weighing less than 10kg, and capable of being mounted from a ceiling, table and wall, this addition to the YuMi family offers increased flexibility to help meet high-mix, low volume production in short cycles.

Zero-Max Crown drives feature heat treated AGMA Class 10 spiral bevel gears. This combination of bearing design and lubrication formulation ensures maintenance free operation for industrial applications.

The EPIC-KBS9, a 4” SBC is built to accommodate 65W Intel Core i socket-type processors. Fitted with these CPUs, the board is designed for data encryption, video streaming, and advanced machine vision applications.

The MMB501 is suited for integration into gaming, entertainment, POS/kiosk, surveillance, industrial automation and many more applications.

Saki Self-Programming is a system that doesn't require DFM software. It combines technology that captures complete height and XY data and images while simultaneously scanning multiple fields of view.

This product is intended for the removal of caulk, sealant, adhesives, tape, paint, stickers, labels, grease, lubricant and difficult to sweep metal chips, flakes or discs.

These cables feature a specialized channel separator and load bar to achieve true Cat5e performance while maintaining a right-angle bend and are fully shielded to limit EMI and RFI interference.

With a backlit screen, these power meters display key power system values, and direct access keys (four to six depending on the model) are used to access functions required for energy efficiency projects and electrical distribution monitoring.

The HAL-CMR-IP-POE-PTZ-20MP produces 1080p full-HD high resolution images day and night, for both indoor and outdoor applications. This explosion proof camera is capable of capturing images 1920 x 1080 resolutions.

Analog and relay outputs are available via separate DIN rail mounted modules with use of an optional PSC-PM180 touch screen display. Configurable parameters include emissivity settings, response time and averaging via a PLC or optional touch screen display.

The measuring system posirot PMIS4/PMIR7 consists of a sensor head PMIS4 and a magnetic ring PMIR7 with magnetic index marking. The sensor head is made of metal and is fully enclosed on all sides.

The OFP series features a single-unit solution combining a flat touch screen display with embedded computer for industrial and commercial applications.

Initially available as the semiautomatic KASTOmiwin U 4.6 and the automatic A 4.6 version, it is designed particularly for cut-to-size pieces in the steel industry, the iron and steel trade, plant construction and special machine building.

With accompanying voltage controller, the brake’s power consumption is stepped down to 7VDC after a split second of 24VDC for brake actuation.

The "Partfinder" software analyzes 3D CAD data geometrically as well as on the basis of the construction history, PMI and metadata. The information thus obtained is stored in a database.

These stepper drives consolidate motion control functions into the application software of the primary logic or machine controller, rather than in individual axes.

This System-On-Module encompasses eMMC Flash whose capacity ranges from 4GB to 64GB and 64-bit DDR3 with capacity as low as 256MB to as high as 4GBytes

SIRCOVER manual transfer switches have three stable, completely isolated positions and feature 2, 3 and 4-pole configurations; 100A, 260A and 400A ratings, with 240VAC and 600VAC max operation voltage (AC) ratings.

A non-contacting linear motor measuring 8.7 in. [223 mm] long x 3.0 in. [75 mm] wide x 1.7 in. [43 mm] high this LIM operates on the same principal as a rotary, squirrel cage, induction motor.

This touch panel PC has a 15.6" WXGA TFT widescreen LCD display with a projected capacitive touchscreen and 400 nits brightness. It is capable of displaying contents in HD resolution (1366 x 768), making it suitable for human machine interfaces, infotainment and self-service kiosks.

This automation and process control system includes a Motor Starter Process Control Panel. Included in this control panel is an Allen Bradley PLC with discrete and analog outputs, an Allen Bradley Panel View Plus 10” color touchscreen, and custom automation software to meet the application requirements.

The GPL-V (shaft) and GPL-H (hollow) have a backlash of ≤0.1 arc minute and are planetary gearboxes for horizontal and vertical robotic applications. Tilting rigidity results in positioning accuracy with a rated 20,000 hours.

The HART 7 position transmitter’s LCD display and navigation buttons permit local 5-point calibration for setup on linear applications. Diagnostic capabilities include measurements such as percent valve is open/closed, open and close dwell time, valve transition time – from open to close, and last open/close stroke time.

The REX12D-T circuit protector, in combination with the EM12D-TMB supply module that communicates via Modbus-RTU protocol, is intended for those looking to incorporate condition monitoring and predictive maintenance into their systems.

The CryptoAutomotive TA/BSD development kit emulates a secure node in an automotive network and provides system designers with a starting point for implementing security.

The all-rounder uses red light and lets users choose from among four sensor modes: background suppression, energetic diffuse, retroreflective or through-beam sensor. All the sensor functions can be configured over IO-Link while the system is running, so that a remote teach-in can be initiated by the controller.

With a frequency range of 10 to 1,000 hertz, the 3561 FC detects and notifies users of conditional changes caused by critical faults like imbalance, misalignment, looseness and bearing wear, providing warning of impending equipment failure.

There are Multi-Mode and Single-Mode models to support applications with a variety of fiber distances and types. It is designed to fulfill industrial applications that require fiber optic distance extension while using minimal space.

The trip-free design eliminates closing the circuit during an overcurrent event. The device also isolates problems in the system while allowing for continued operation. The series complements the TMC 8 series of UL 489 circuit breakers.

KeyedIn Manufacturing for Enterprise Resource Planning (ERP), focused on delivering increased functionality for custom, make-to-order manufacturers, now allows them to streamline front-office manufacturing management processes.

The Thomson MLA is suited for force-sensitive applications requiring shorter strokes that must be repeated with precision. Examples include adjusting a microscope slide stage, tilting a computer monitor or vertically positioning a pipette onto a test tube array.

L-com offers two versions of these assemblies. One version features USB 3.0 Type-A male to Type-A male connectors and the other version features USB 3.0 Type-A male to Type-B male connectors.

The EcoStruxure Foxboro DCS is an open, interoperable and future-proof process automation system that is designed to provide control over a manufacturing plant’s operational profitability.

The first is the HARTING MICA CISS Complete IIoT Starter Kit for a basic condition-monitoring application. The HARTING MICA RF-R300 Complete RFID Starter Kit contains everything needed for a basic RFID asset tracking application. The third kit is the HARTING MICA Basic Ethernet Starter Kit.

The AcuDew is available with several optional display modules. It has a loop powered, local, plug-in dew/frost point module, the AD-LPD. This module plugs into the cable connector of the AcuDew for a truly local display.

Telchemy has field experience in Edge Analytics with an installed base in excess of 300 million agents that provide analytics for real time services.

Model 633A01 is a piezoelectric accelerometer with integrated internal digital data processing for USB plug-and-play capability as well as data collection and sharing

The reading window of the PXV has been enlarged to approx. 120 x 80 mm, meaning that the Data Matrix code tape is always located within the sending range

The IS2064GM-0L3 SoC makes the LDAC codec available to the market of audio product vendors, and it also allows customers to utilise Microchip’s technical support and development environment to assist customers

This timer features astronomic programming which allows sunset/On and sunrise/Off configurations. Also included with this unit are adjustable pulse features for contractor and bell ringing applications.

The web server uses IODD (IO-Link Device Description) files that come with each IO-Link device to display, edit and update device parameters in human readable language.

hese DC/DC converters are enclosed in a 6-sided shielded metal case with an insulated base plate, an internal filter to meet EN 55032 class A conducted emissions or class B with external components and short circuit / overload protection circuits.

The Bodine 22B brushless DC motor delivers operation with low electromagnetic-interference (EMI). It is encoder-compatible with the optional screw-in encoder shaft kit.

The Bodine 22B brushless DC motor delivers operation with low electromagnetic-interference (EMI). It is encoder-compatible with the optional screw-in encoder shaft kit.

The Multi Gas / Multi Range functionality of the EL-FLOW Prestige enables the user to select any of the installed gases and to adjust the measuring range within the boundaries of the device.

Production is now machine-supported with the CTScan 3, resulting in crystal uniformity. Due to the range and signal stability, material thicknesses can be tested with the same X-ray energy. The solid housing is particularly resistant to temperature fluctuations, for cooling of the electronics.

Industrial vision applications include unattended surveillance systems, process automation, and machine vision.

The Bussmann series Compact Circuit Protector (CCP) is a fused disconnect that features through-the-door operation and a multi-wire lug kit for application versatility while continuing to provide up to a 200 kA short-circuit current rating (SCCR), for industrial control panels, machinery and HVAC applications.

The 460ETCWI-N2E helps users to monitor ControlLogix PLC data from Excel or pull table values into any industry-standard web client application.

This ECD CN Analyzer solution helps plants achieve a cyanide removal water treatment system, which ensures wastewater is treated to meet U.S. EPA regulatory requirements prior to effluent discharge.

Kyntronics SHA is fully engineered as a standard modular product. The system can be oriented in any position..This solution is powered by a servo motor that drives a hydraulic pump which generates pressure to act on a cylinder to provide mechanical actuation force.

The Type-3600 is designed to safely reduce inlet pressures from as high as 6000 psig (413 bar) down to working pressures ranging between 0 and 225 psig (15.5 bar).

The MCT4 will provide control for applications in various markets including semiconductor, automotive, heat treating, packaging, food & beverage, chemical, HVAC, laboratory, etc. where control, monitoring and/or data logging is required.

Antaira Technologies’ IMP-C100-XX series is an industrial Ethernet-to-fiber PoE+ media converter featuring a 10/100TX Ethernet port and a fixed fiber interface which supports ST or SC connectors depending on the model.

The SMARC 2.0 modules with NXP i.MX8 processors, hardware based virtualization and resource partitioning are designed for a range of stationary and mobile industrial applications including real-time robotics and motion controls.

Tripwire Data Collector provides visibility of cyber risk through its ability to harvest asset data using native industrial protocols, standard IT protocols, and integrations with intermediary software applications

This is the second of two releases scheduled for PC-DMIS in 2018, with continued service pack updates. Additions within PC-DMIS include a 2D Radius Gauge for quick checks on the go, added MoveInspect XR8 support, QuickFixture workflow with snap-to-grid capability, NX 12 DCI and Catia v5 R27 DCI & DCT support,

This brake is designed to decelerate or hold an inertial load when the voltage is turned off. When voltage is applied, the friction disc is released and the brake is free of torque.

The device provides standard power calculations such as active, reactive and apparent power, active and reactive energy, root-mean-square (RMS) current and voltage, line frequency and power factor, which enable designers to add power monitoring functions to end applications.

LAS-19-A AC-LVDTs are designed for use in power generation facilities and industrial automation equipment, and in many OEM position sensing applications.

Designed to operate from -40ºC to +60ºC, these recorders can handle most thermal environments, making them suited for UAV’s, aircraft pods, tight equipment bays, military vehicles and most outdoor environments.

The sensor collects data including: various types of vibration, bearing health, cooling efficiency, airgap eccentricity, rotor winding health, skin temperature, energy consumption, loading, operating hours, number of starts and RPM speed.

The chip addresses the fact that a large proportion of slave devices in use today will have to be replaced and/or updated if cyber risk threats are to be countered adequately for cloud-based and Industrial Internet of Things (IIoT) applications.

This air to air technology takes advantage of a cooler ambient environment especially in harsh (dusty, oily, dirty) conditions when closed-loop cooling is required.

The ceramic caps provide end protection for flush-mount and cylindrical-style inductive proximity sensors. The caps can simply be threaded in place to protect the most vulnerable area of a cylindrical bodied sensor.

Applications for the RazerCam Z or the EyeCheck 4700L are for example when products or components are transported on conveyor belts. Typical branches are e.g. print, sorting and packaging, food industry as well as all kinds of surface inspections.

To date, most of the forged cam lobes are produced on the two Hatebur machines HOTmatic AMP 30 S und 20 S. The machine has a total press load of 1500 kN. The machine body has been reinforced for stability.

With temperature compensation across the working range from -70 °C to 180 °C (-94 °F to 356 °F) and the choice of stainless steel and plastic probes, the module is suitable for a range of applications.

The eddyNCDT 3060 is an eddy current measuring system for displacement measurements. With more than 400 compatible sensor models and smart signal processing, the eddyNCDT 3060 is designed for inductive displacement measurement.

Built-in Wi-Fi, NFC, 3G/4G LTE, and Bluetooth 4.1 technologies provide connectivity for data acquisition, transmissions, over-the-air (OTA) updates, and real-time communication with backend systems.

Both products will be released September 1. Offered in a complete range of input and output voltages (600-volt class and below), the units are UL, cUL and CSA listed with CE agency approval available.

The patent-pending SOMIC-FLEX III addresses requests from retail chains in the North American market looking for upright, two-part cardboard packaging. A manufacturer for end-of-line packaging technology, Somic is known for its design and development capability.

The P1177E-500 offers multiple CPU options with the LGA1151 socket 7th/6th generation Intel Core i7/i5/i3, Celeron or Pentium processors and the Intel H110 chipset.

The safety solution integrates aeSolutions’ aeShield process safety software with Honeywell’s Safety Builder, Process Safety Analyzer and Trace solutions.

JetCon 3701 is designed with IEEE 802.3af / IEEE 802.3at compliance and also has a metal case and IP-31 protection. It supplies single power input, the functionality of real time redundant power backup results in a real Industrial Gigabit Ethernet Media Converter

Loaded with inputs, outputs, and relays, the card will be designed for the Industrial Automation market. According to the KS page, the card attempts to integrate as many Industrial Automation functions as possible into the format of the Raspberry Pi.

A LIM is a non-contacting, linear motor that operates on the same principal as a rotary, squirrel cage, induction motor. They are used in applications that do not require positioning.

The TCM “CLASSIC” Series meets general industrial requirements out of the box while the TCMP "PRO” Series offers units with performance specifications and diagnostic capabilities for operation in challenging environments.

Entry onto the international list of products conforming with the standard and receipt of the BTL certificate affirm the reliable communication between zenon and other systems and devices in building automation.

When mounted on an ABB KM26 magnetic liquid level gauge, or any other magnetic level gauges that contain a magnetic float, the LMS200 switch can sense high or low levels within a vessel. The magnetic coupling action avoids the need for seals, diaphragms, springs, or torque tubes.

The automated coating inspection (ACI) line combines the Select Coat SL-940 Conformal Coating system with the FX-940UV Series ACI/AOI Automated Conformal Coat Inspection system. Together, the systems ensure a conformal coating process.

The addition of a VFD product line is designed to simplify workflow by enabling customers to obtain VFDs, PLCs, and HMIs from a single supplier, program them all in a single software, and receive support from the same team throughout a project.

The ControlTower 856T is capable of accommodating up to seven modules in the same stack, offering users the ability to monitor more machine and process conditions in a single device.

The TDC gateway systems from SICK are used to collect, analyze, store, and transmit sensor data in mobile and stationary applications

Endress+Hauser designed the Memosens CCS50D chlorine dioxide sensor to achieve a safe and efficient disinfection by providing stable measured values.

The eBOX800-511-FL is designed for an operating temperature from -30°C to 60°C, operating shock tolerance up to 3G and 9-36V wide range DC input.

Users can choose from finger, hand or body detection versions, covering protective heights from 150mm (6 inches) to 1800 mm (71 inches). These safety light curtains meet the levels of safety required by EN ISO 13849 (PLe) and IEC/EN 61508/62061 (SIL 3).

Emerson’s Roxar RMS reservoir modeling software is a geosciences and reservoir engineering platform for seismic interpretation, well log interpretation and correlation, mapping, geomodeling, gridding and flow simulation.

Designed as an IIoT gateway for machine and plant engineering, the device has two Ethernet interfaces, a hardware watchdog and the possibility to connect various radio modules.

With a built-in, tool-centric force/torque sensor, the e-Series is ready to take on collaborative robot applications that require force control such as sanding, buffing, polishing and deburring where force-feedback is paramount in order to obtain uniform results.

The linear actuators offer a integrated linear guide with movable polygon profile, feeding is possible without additional mechanical components.

IBR115 and IBR117 are scalable SBCs with extended operating temperature support of -40°C to 85°C and an optional heatsink. Supporting 1GB DDR3 memory on board, the boards provide a number of interfaces for HDMI and single LVDS display interface, 4GB eMMC, Micro SD, COM, GPIO, USB, USB-OTG, Gigabit Ethernet and a M.2 Key-E interface.

All FLIR One Pro models feature FLIR’s MSX and VividIR video signal processing technology to deliver thermal image quality.

The miniature VP Series is designed for miniature automation applications, such as medical and semiconductor. The housings are manufactured from aluminum.

The PAC1932/33 devices include what is needed to measure power on a single Integrated Circuit (IC), integrating multiple channels in a single package for applications such as Point of Sale (POS) systems, ATMs and building automation.

Available in eight models, with standard ranges from ±2 g to ±400 g, the Model 2422H series is designed for zero-to-medium frequency vibration and acceleration sensing, in commercial and industrial applications where a hermetically sealed case and +5 VDC regulated power supply are absolute requirements.

The EPS-PB10-DPDT from Larson Electronics is an explosion proof single push button switch rated at 10-amps and operates on 600V AC with a choice of ½” inch or ¾” hub sizes for connection.

While it weighs 4.9kg, it has an aluminum enclosure, 6H anti-scratch tempered glass surface, and NEMA4/IP65 protection structure ensure that cMT-iM21 will serve as a monitoring assistant in industrial environments.

The sensor uses red light and lets users choose from among four sensor modes: background suppression, energetic diffuse, retroreflective or through-beam sensor. All the sensor functions can be configured over IO-Link while the system is running, so that a remote teach-in can be initiated by the controller.

ABB’s paint atomizer is designed to double the operating time between manual cleaning from two to more than four hours for the externally-charged atomizer. The entire ABB painting system offers an environmentally friendly solution that provides real-time analysis and diagnostics.

The TPP 450A series consists of 6 single output models of (12~53 VDC). Standard features include; aux output of 5VSB / 2A and a 12V / 0.5 A for fan cooling, Remote Sense, Power Good and Remote On/Off.

For both systems, the user can switch between different A-scan rate presets ranging from 5 kHz to 248 kHz to achieve a balance between sensitivity and imaging speed.

ABB Ability Verification for measurement devices is an extensible application that connects with field devices over their applicable protocols to provide in situ verification. It provides PASS / FAIL results together with relevant diagnostic information in a series of tests chosen by the user.

The doors with polycarbonate windows are available in various sizes to fit compatible Hubbell-Wiegmann NEMA 3R, 4, 4X or 12 rated enclosures.

The QualityWorX CTS DataHub is a platform for collecting and analyzing data from up to five CTS Sentinel instruments at a time, without requiring IT support to set up.

The cameras are equipped with a standard GigE Vision interface capable of running at 9.3 frames per second for 8-bit monochrome or raw Bayer images at full resolution (4112 x 3008 for monochrome and 4088 x 3000 for color). T

The ModQ is designed for data management of turbine flow meters in new and retrofit installations for a variety of industrial applications such as oil & gas, metals & mining, water & wastewater, chemical, power, food & beverage, pulp & paper, aerospace, and pharmaceutical.

VisuNet RM Shell 5 now supports an Application Manager for installing third-party application software and offers additional security and Windows update features.

To meet a variety of Artificial Intelligence solution-ready system requirements, the AI embedded computer has one USB 2.0 port, two Gigabit Ethernet ports, one HDMI 2.0 port and four SMA type antenna connectors.

The user can connect the SPA to the compressed air supply on an existing machine, providing them with analysis options for key machine characteristics, such as compressed air consumption and possible leakages.

This is designed for outdoor applications such as factory automation, security, ITS transportation, power/utility, water wastewater treatment plants, and any other extreme ambient weather environments.

KEPServerEX version 6.5 includes secure deployment guidelines, greater project file protection, enhanced password configuration and other updated security components.

Asyril’s URCaps plugin, available on the Universal Robots+ Solutions platform, enables integration of any Asycube in conjunction with any Universal Robot.

With the aid of TwinSAFE SC technology, it is possible to make use of standard signals for safety-related tasks in any network or fieldbus system.

Designers can now copy and paste code from the Connected Components Workbench software to the RSLogix 500 or Studio 5000 software and vice versa.

The panel PCs are designed to meet the requirements within factory automation, transportation, and embedded applications.

With POSITAL kit encoders, the control system always has complete information on the physical position of the mechanical components that it is directing.

TwinCAT 3 Building Automation meshes with existing TwinCAT 3 modules for HMI and IoT, along with Analytics and Scope, and bundles functions for building automation into one universal tool.

These 15 Watt DC-DC converters provide isolation of 5,000 VACrms (250 VACrms working voltage) with reinforced insulation and low leakage < 2.5uA. All models are certified to ANSI/AAMI ES 60601-1:2005/(R) 2012 3rd Edition for 2xMOPP compliance and are suitable for B & BF rated applications.

The Branson UWS40 splicer is designed for productivity, whether deployed as a portable unit on a wire harness assembly board or on a tabletop.

ProSense SC6 Series signal conditioners are housed in a 6mm width package that allows high density mounting on a 35mm DIN rail to optimize panel space.

The Mek PowerSpector BTL AOI systems offer synchronized inspection of the top and bottom side of PCBs after Reflow, Wave or Selective soldering & placement of SMT & THT components.

Designed for industrial applications, Heavy Duty Line Vacs have a hardened alloy construction that are designed to prevent premature wear when transporting abrasive or heavy materials like shot blast, tumbling media or metal fittings.

The MTQZ50 and MTQZ75 DC-DC converter series, comprising of 8 models, integrate an I/O isolation of 3000VAC, offering input voltage ranges of 72 (43-101 VDC) and 110 (66-160VDC) with outputs of 5V, 12V, 15V, and 24V.

The E126 explosion-proof flow computer for corrected gas and liquid volume measurement measures the actual flow, temperature and pressure and converts it with a gas formula to gas volume at reference conditions.

CAMI Research, manufacturer of the CableEye automation-ready cable and harness test system, has developed the capability of checking and measuring twist pair relationships in cables as short as six feet.

Included in this Feedmill Automation System is the control and automation of Batching, Grinding, Material Receiving, Truck Scale and Loadout processes. Two (2) desktop PC’s are provided.

The PS480D72 Switching Power Supply runs on 120 or 220V AC and provides 6.7 amps. The output of the supply is adjustable between 70 and 80 volts DC, making it compatible with drives and integrated motors that accept supply voltages in that range.

The is Listed to UL 1449 and is available with up to 80 kA surge capacity. This line was developed specifically to conform to North American-centric voltage values and includes a variety of U.S.-based circuit configurations.

The NewTek M-375 Series Miniature AC LVDTs provide dynamic measurement for machine operations such as robotics, automatic inspection equipment, plastic injection molding, hydraulic cylinder and valve positioning, downhole drilling, and dimensional gaging.

Measuring 82 x 82 x 40 mm, the C6015 IPC with multi-core technology can be installed in confined spaces and is equipped with an Intel Atom processor that offers up to four CPU cores.

The SSW Detect Switch has many attributes, such as Electric Parking Brakes (EPB) and x-by-wire, which each require functional safety in accordance with the ISO 26262 automotive standard, as well as any other applications where low-level signals are used.

The first OmniCore variants are designed to help integrate robots into the digital factory ecosystem, whether manufacturers need standardized motion control or more tailored solutions.