Industry Products

Based on an IoT platform architecture, KNet IIoT extracts a large amount of data from assets based on OPC Unified Architecture standards integrating multiple wide-spread systems into a cohesive whole.

The TRN 1 series feature 2:1 input ranges, a full load -40 to +90°C operating temperature range and are available in an SIP or SMD package (suffix SM).

The IFB125 is suitable for a variety of applications including applications that require remote control and monitoring management functions, i.e., unmanned control, industrial automation, automatic parking lot control, traffic light control and more.

Three-phase AC voltage systems up to 690 V can be analyzed simultaneously on six channels and with 20 ksamples/s directly in the PLC. For each of the three phases, the EL3783 EtherCAT Terminal from Beckhoff samples voltages up to 400/690 Vrms and currents up to one or five Arms as instantaneous values with 16-bit resolution.

Recommended when there is a need for repeat connection and disconnection of test fixture cables, it is designed to allow users to minimize bent pins and wear of the headers on the main unit, expansion modules, and free-standing QuickMount housings.

Pervasive Sensing uses the power of sensing technologies to provide continuous, real-time data that power Plantweb Insight applications to support customers’ operational programs in key performance areas such as safety, production, and energy and emissions management.

Korenix JetCon 2301S is a single port 10/100 TX to 100 FX media converter. It fulfills latency requirements with invariant forwarding latency from 64 to 1600 bytes. The Auto Link Loss Forwarding technology allows fault detection in a short time.

The XV100 basic human machine interface (HMI) is designed to provide machine visualization and control, the XV300 HMI offers next generation performance and functions, and the XP500 industrial PC can operate as a supervisory control and data acquisition (SCADA) solution.

Honeywell designed the Asset Performance Insight solution to be deployed to customers through pre-configured templates. These templates are based on the company’s industry experience and real-world customer challenges enhanced with advanced analytics.

NDT integrates real and simulated cyber-attacks, wired and wireless virtual networks, live and virtual equipment and applications, and traditional kinetic warfare training simulators into a full, instrumented, synthetic cyber warfare training environment.

Units are recognized to Standard UL-1004-6 for Servo and Stepper Motors, UL 1004-1 Standard for Rotating Electrical Machines, and Canadian CSA Standard C22.2 No. 100-14 for Motors and Generators.

The CMM platform features four capability packages focused on customer productivity drivers: Throughput, Precision, Multi-Purpose and Shop-Floor.

The SC-350 is ideal for applications that require precise edge definition and uniform passes for 100% solids as well as solvent-based materials. An airflow extension optimizes atomization of high-viscosity materials, such as silicones, acrylics, and urethanes, and reduces the "cobwebbing effect"

These customized unloading systems can include bulk bag discharging, material weighing and batch dispensing, along with the controls required for automatic operation.

The FWM8BLZ02A-109069 beacon monitors temperature, inclination, vibration, and motion data and records it to non-volatile memory inside the beacon. It is capable of storing up to 68 hours of data at 60 second intervals, or 42 days of data at 15-minute intervals, with a maximum storage capacity of 32Kbytes.

The OPC. NET Client Toolkit enables programming of OPC client software using .NET and without dealing with OPC and COM complexities. The resulted applications provide real-time data, historical data, alarms and events access.

The sensors feature 4 to 20 mA or RS-485 Modbus outputs, depending on the model selected. Up to 247 sensors may be installed on each Modbus network. The PSC-SSS-PM Series sensors are designed to simplify set up for alarm relays and adjustments.

SureMotion hardened rotary shafts are precision ground for a surface finish of 10RMS. Models are available in diameters up to 3/4 inch and precut lengths up to 36 inches.

The upgrade features connectivity to Ignition by Inductive Automation, an industrial application platform for SCADA and IIoT solutions, via the industry-standard Sparkplug MQTT profile, as well as enhancements to RAMQTT, Red Lion’s MQTT client.

Designed for the observation and inspection of metal components, the Olympus GX53 inverted metallurgical microscope features an LED light source. The GX53 microscope also incorporates the latest version of OLYMPUS Stream image analysis software (v. 2.3) for observation and reporting capabilities.

The MLC 530 SPG (“Smart Process Gating”) light curtains, use a control signal provided by the PLC and the interruption of the protective field itself for bridging to the material transport.

Most current Pro-face HMIs and iPCs are Pro-face Connect ready allowing users to access to their machines remotely to program, troubleshoot, and maintain the unit’s performance.

The U1-050 UCC complies in many directions to overcome misalignment between the tool and the workpiece. The patented mechanism is designed for demanding high-endurance applications and offers simultaneous X-Y lateral compliance, X-Y-Z axis rotation, and Z compression.

The custom CMOS imager features six separate lines of 7.5-micron pixels with two lines each of red, green, and blue pixels. This arrangement makes it possible for the SW-4000TL-PMCL to provide horizontal binning, vertical binning, or both

The MesoSPHERE Plasma System is designed for processing of 3D and wafer-level packaging processes such as fan-in, fan-out, wafer-level, and panel-level -handling wafers up to 450mm and panels up to 480mm. The MesoSPHERE's W3 three-axis symmetrical plasma chamber ensures that all areas of the wafer are treated equally and uniformly.

The FT4X was designed to be used in Oil & Gas and Industrial applications. It is suitable for applications monitoring pure gases, mixed gases, and even complex flare gas compositions.

In addition to its pair of fiber/copper SFP GbE ports are four conventional GbE ports and two Mini-card slots to accommodate WiFi and 4G LTE expansion. The system’s inbuilt bypass function also ensures that network traffic will continue to flow in the event of software complications or loss of power.

In addition to the redundancy Ethernet networking features the device is equipped with redundant power supply inputs. The RSG907R and RSG909R come with a set of approvals enabling digitalization in Electric Power, Transportation and Oil & Gas markets.

Single-phase MTR2 rolled-steel motors are available in 1800 RPM, 115/230 VAC models. The motors are 56C frame, TEFC, and provide rigid base or C-face mounting. Nameplates include 60 & 50Hz specifications and reverse wiring instructions.

The GOT815L-511 has a 15-inch XGA TFT flat bezel LCD display with 420 nits of brightness. The GOT817L-511 has a 17-inch SXGA TFT flat bezel LCD display with 350 nits of brightness. These touch panel PCs are designed for use in humid or dusty environments.

Each frame size offers a range of interrupting voltage ratings from 240-690 Vac and 250-600 Vdc and are compliant with global standards that include UL 489, CSA C22.2 No 5.1, IEC 60947- 2.

The Area Profile Scanner 3D offers a combination of stereometry, triangulation and different types of illumination according to the specific application: a random pattern illumination of a multi-line illumination

Each TCW210-TH can monitor up to 8 temperature and/or temperature-humidity sensors of various brands and types (up to 24 different parameters each) via either 1-Wire interface and/or the more robust MODBUS RTU over RS485.

Heartbeat Diagnostics’ continuous analysis of transmitter/sensor system health status during operation enables recognition of related events when they occur.

ACRView is a code-development tool that assists users of ACR controller and IPA drive products to program, debug, and commission their application. Several features are incorporated to assist both the novice and expert users in developing code.

These sensors feature impact-resistant Type 316L stainless-steel or aluminum housings with seals rated to IP67. They are designed for marine vessels, off-shore facilities, mines, cranes, wind turbines and other challenging locations.

Developed for deployment at the heart of the pipeline operations management environment, the EPMS supplements a core SCADA platform with specific gas and liquid applications that enable a pipeline operator to manage delivery contracts and associated logistics.

Housing of the RFX 6900 Series is anodized aluminum and sealed to IP 67 or IP 69K—depending on version. Conforms to ISO 13849 for safety related applications.

The model NCC08-75-3000-3X is capable of generating a continuous force of 300 pounds [1330 N] and a peak force of 900 pounds [4000 N] at a duty cycle of 10% (i.e. 1 second on, and 9 seconds off).

The e-CAM21_CUTX2 camera is a camera for smart applications powered by Machine Learning and Deep Learning technologies on the powerful Tegra X2 platforms including smart surveillance, smart parking and other innovative applications requiring cameras with excellent image quality

R-TecLiner’s spring return mechanism is designed to guide the energy package with minimal wear. The completely enclosed system comes in aluminum housing to protect against hazards and dust ingress.

The industrial PC is made for automatic optical inspection, digital signage, motion control, factory automation, and many more Industrial IoT applications.

In andon, manufacturers can collect production results (pass/fail) and station status (red/yellow/green) in real time for each station on the manufacturing floor. This data can be collected through andon’s web app or through their public API for integration with a company’s existing automation.

The SC2818 motors are available in three lengths, each with one or two shafts. The version with the B-shaft is optionally offered with an NOE1 encoder with up to 2000 increments/revolution.

The Tolomatic ServoChoke SVC electric choke valve actuator is designed to meet requirements for a more flexible high-speed actuator in performance drilling applications such as managed pressure drilling (MPD), set-point control or choke-and-kill.

Powered by Intel Apollo Lake processing, the ML350 is a customizable computing platform, purpose-built from board to chassis for applications ranging from digital signage and machine automation, to industrial IoT and edge computing.

The LEC-2137, measured at 198mm x 57mm x 143.8mm (W x H x D), is a thin client gateway that can be configured with either a total of 6 Ethernet ports or 2 Ethernet ports and 4 PoE ports.

POSITAL’s motor feedback kits, which feature 17-bit electronic resolution, are designed to bridge the gap between simple resolvers and more complex and expensive optical encoders for servomotors, robot joints and other applications where absolute rotary position feedback is required.

The V5 MES and V5 ANDON software now features two (2) separate real-time reporting apps, i.e. a business and manufacturing intelligence dashboard for over-all plant performance monitoring and reporting for plant or engineering managers; and a corresponding plant floor or work station level dashboard screen for assembly line workers and area supervisors to track their progress.

The DX 8600 Series Data Link has been specifically designed for data & power transmission from any rotating shaft to a static location. The Data Link utilises an inductive coupling to provide power to the rotary transmitter, which then sends serial data back to the stator module.

The shielded ER SMT series – Gowanda ER5025S – complements MIL-PRF-39010 Qualified Product List (QPL) axial-leaded (thru-hole) products and enables their conversion to SMT circuitry via this MIL-PRF-39010 qualified SMT series.

The comprehensive solution suite is designed to enable electric power utilities to optimize asset utilization and reduce equipment failures and system outages.

The SmartPAC PRO architecture supports advanced connectivity features such as remote access from PCs and mobile devices, email messaging, and compatibility with Wintriss’s IIoT production tracking solution ShopFloorConnect

The HeavyMate range consists of hoods, housings, inserts and various contact types designed for external applications where EMC protection is important; where a high number of contacts may be required or a range of signals are being transmitted; and where there is a need for a lockable system.

This version of LabVIEW NXG introduces key functionality, particularly for engineers developing, deploying and managing automated test and measurement systems.

This multiplexer is an ethernet controlled version of the USB controlled multiplexer - IA-3133-U2i. The new ethernet controlled version functionality is compatible with the original USB controlled version, with an additional ability to handle 64x1 channels.

The FHA-C Mini Servo Actuator with multi-turn absolute encoder (MZE), is designed to provide performance for machinery, automation systems and industrial robots in environments prone to electromagnetic interference (EMI).

STEUTE's Series ZS 71 emergency pull wire switch is equipped with snap-action, NC positive-break contacts, providing a means for initiating an emergency stop along the length of the installed pull-wire.

The JR-2000 includes an LED-based status indicator allowing users to quickly see whether the logger is actually logging, is set for a delayed start, is full, or is in an alarm state.

The Ruggedcom RST2228 is a Layer 2 rack switch with 4 integrated 1/10 Gbit/s uplinks and up to 24 field modular 10/100/1000 Mbit/s interfaces supporting IEEE 1588 Transparent Clock.

Available in size ranges from 70 Watt to 100 Watt, these EC (electronically commutated) frameless slotted motors feature voltage windings, high pole pair count and are shipped as BLDC frameless motor kits.

The modules, when used with ABB’s AC500/AC500-S programmable logic controller (PLC), feature the ability to exchange process and safety data, not only from one controller to multiple devices but also from one device to multiple controllers, using PROFINET/PROFIsafeshared device functionality.

The binder Series 696 HEC connectors are manufactured from a tough UL 94V-0 rated polyamide and incorporate a three-point bayonet locking system that makes for secure fastening.

The release of NUMROTO software provides numerous features and enhancements. These include features for ball nose and corner radius tools, automated documentation of fully dimensioned wheel packages, and grinding spindle power monitoring to facilitate adaptive grinding on specific machines.

The transformers comply with the latest NEC requirements for harsh and hazardous industrial locations, making them ideal for service in petrochemical facilities, wastewater treatment centers, and power generation plants.

The AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in).

The terminals are available in 7-inch, 9-inch and 12-inch display sizes. A 6-inch display option will be available in 2018. The terminals are specifically designed for applications of up to 50 HMI screens

igus Chainflex cables are available with 3 to 25 unshielded (CF5 series) or 4 to 12 shielded (CF6 series) conductors in 20 AWG to 14 AWG sizes. Chainflex cable is sold in 20, 50, 100, 250 and 500 ft. lengths.

With a touchscreen and LCD, this HDMI-enabled unit can work with screens of any size. It can also allow touch control via USB connection.

The RELY-TSN-PCIe smart pluggable board combines in a single device PCIe TSN Endpoint and TSN Bridge functionalities, and provides 3 external fiber or copper tri-speed Ethernet ports.

The Kinitics KLA05 Linear Actuator provides forces up to 650 N (146 lbf) and strokes up to 6.7 mm (0.264"), can be configured to supply a pushing or pulling force, and fits in a variety of applications

The AS7265x chipset consists of 3 6-channel sensor devices, each 4.5 x 4.4 x 2.5mm, in land-grid array packages with integrated apertures. The master-slave-slave architecture appears as a single logical device.

They are single axis ICP voltage output with measurement ranges of +/- 5,000 g (model 352A91) and +/- 20,000 g (model 352A92).

Scalability features in R19 include parallelization of complex calculations across CPUs within a single server, administration tools for performance optimization, and increased control and visibility by users into their efforts with real time progress indicators.

This Wireless Analog Transmitter/Receiver System allows for remotely monitoring sensors or controlling process equipment from a distance up to 1 mile (LOS) line-of-site away using license free wireless 2.4GHz 802.15.4 communication.

This power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more.

The female panel mount connector provides IP54 protection from intrusion of liquids, water splash and touching of the contacts. Mechanical resistance is greater than 5,000 mating cycles.

In addition to its Core processor, the NANOCOM-KBU boasts an upgraded embedded controller structure with a real-time interrupt for faster response rates, and it addresses a customer demand for power control and battery management systems.

The Roller Non-Contact Accumulation (RNCA) Decline allows systems to accumulate and decline items on a single conveyor.

PAS Cyber Integrity 6.0 now includes continuous vulnerability management providing visibility into vulnerability risk within industrial process control networks

All IntelliPICK3D sensors are pre-calibrated, come with an additional automated calibration of both sensor and robot as well as a menu designed to shortenset up times to just a few hours.

The Ergo-Matic line features lift capability up to 36” to double-stack drums, spark-resistant components for flammable areas, double “Parrot-Beak” clamps for fiber and plastic drums plus special wheels and coatings for FDA Approved applications.

The Series 9200 is specifically engineered to meet the requirements of the oil and gas industry’s exploratory well-logging process. It is designed to allow well loggers monitoring a drill site to analyze the hydrocarbons within a well both quantitatively and qualitatively, while drilling.

First available in 2014, the SDN 40-24-100C has been redesigned by doubling its 2 terminals to 4 terminals to enable plant managers to connect more than one load to the power supply.

The A-82x controller family integrates closed-loop digital servo control, drivers, and power supply in one rack mount design. Depending on the number of axes, total output power of 1100W to 2000W with peak power to 3900W is provided.

The latest version, ABB Ability Knowledge Manager 9.0, incorporates digital capabilities and technology to provide mining and cement industry customers with the ability to view, analyze, and act upon critical process data from any mobile device.

As a free-standing, quick-release board fixture, it allows users to connect CAMI’s test interface boards to the 64-pin headers of any expansion module - even at some distance. The housing may be used with any CableEye model and is rated to 2100 V dc / 1500 Vac.

Developed for imaging applications that don’t require the higher speed of On Semi’s P1 sensors, the latest P3-based cameras are available in color and monochrome.

Integrating CyberX’s purpose-built OT security platform with IBM QRadar is designed to enable organizations to respond more quickly, allowing CISOs to strengthen OT security while building upon the investments they’ve already made in people, workflows, and technology for the corporate SOC.

The MAQ20-DORLY20 module offers 20 isolated SPST latching relay output channels that can switch between 2A at 30V and 0.4A at 150V. Each channel has contact state readback to verify the physical output state.

Mencom’s Inside-Outlet (GFDP1) Power Port features three GFCI-protected receptacles; two outside and one inside the panel to provide a solution to comply with NFPA 79, The Control Panel Utility Receptacle Standard.

Combined with a USB3 Vision interface for plug and play compatibility, the AP-3200T-USB camera can output as much as 3 x 3.2 megapixels at 38.3 frames/second. The USB3 Vision interface allows for a data throughput of 350 MB/s.

Built to run on any devices, Shopfloor-Online 7.0 supports the mobility of workers in the manufacturing environment whilst delivering real-time factory information to managers and executives.

The THM 20WI series are designed as a solution not only for medical equipment but also for ITE applications such as transportation, control & measurement or IGBT drivers.

The Matrix-713 is a fanless Linux-ready Cortex-A5 Industrial Box Computer suitable for mobile computing, integration and control needs in vehicles and smart factories.

Uniformance Cloud Historian’s design fuses the real-time process data analysis of a traditional enterprise historian with a data lake, enabling the integration of production, Enterprise Resource Planning (ERP), and other business data coupled with analytics tools to provide business intelligence.

Standard configurations of Applied Motion's TSM11 (NEMA 11 frame) integrated motors incorporate a single 12-pin header that provides the power supply, input, output, and RS-485 communication terminals in an integrated space without sacrificing input and output connectivity to other devices, controllers, or HMIs on the machine.

Designed to train operators in the distillation process, the NAPCON Games Distiller can be used in practically any branch of the process industry that includes distillation.

The eMMC 5.1 NANDrive products are HS200/HS400 compliant and support command queuing for data throughput and multitasking. These also offer features, such as advanced wear-leveling, bad block management and error correction code (ECC) capabilities to extend the life of the product.

Available in size ranges from 30 Watt to 70 Watt, these EC (electronically commutated) frameless slotted motors feature low voltage windings, high pole pair count and are shipped as BLDC frameless motor kits.

EyeVision has been enhanced to support the Intel Real Sense D-400. The 3D command set of the EyeVision 3D software allows users to capture 3D images and process point clouds with the Intel sensor.

The LDX-B20 is a microprocessor-controlled buffer unit rated at 20A and usable in 12, 24, 48 and 72 V systems. It monitors output voltage from a DC power supply and, in the case of failure, keeps the output regulated for at least 300 ms at full load.

Working with Microsoft Azure, the Eplan software is equipped to offer secure, worldwide data access, and the provisioning of IT infrastructure

Available on all Makino EDMs equipped with Hyper-i control systems, HyperConnect is intended to enable shop managers and operators to monitor and control EDM processes from any PC, smart device or other Hyper-i control systems on the network.

The Field Xpert SMT70 supports HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus, CDI and Endress+Hauser service interfaces. It can connect to field instrumentation devices directly via a USB or Bluetooth wireless modem, or via a gateway, remote I/O or multiplexer to a bus system .

These sensors operate on 20-250 VAC/VDC input voltage with N.O. and N.C. output options available. The sensors are short-circuit protected and have a yellow LED status indicator that is output energized.

Version 7.0 of the suite delivers enhancements, including administration features, improved developer and engineer usability and enhanced reporting capabilities.

The sensor head with a maximum detection range of up to 850 mm in length can be trimmed to length (minimum 108 mm) and attached to container walls without additional accessories using the integrated adhesive surface

The Woodhead Super-Safeway Power Boxes feature a vulcanized rubber enclosure that is resistant to shock, impact and corrosion. The boxes are 29 pounds and the aluminum legs give it a 6-inch ground clearance.

Designed for industries such as automotive, consumer, and industrial automation, the Micro-Lock Plus Connector System is suitable for a variety of applications, including vehicle switches, robotics, drones, home appliances, and power tools.

Alongside the new SCARA model, Toshiba Machine demonstrated its robot programming tool, 3D vision software and models from its 6-axis range.

Designed for process and plant engineers challenged with measuring wet dirty mixed gases in solid waste operations with co-generation electric power systems, the enhanced ST51 Series Thermal Mass Flow Meter from Fluid Components International (FCI) is designed to provide continuously accurate measurement of landfill gas flow to the co-gen electric power engines.

The ET975 is designed for applications found in factory automation, kiosk, communications, medical imaging and digital signage environments.

AAEON has fitted its new device with an inbuilt Trusted Platform Module (TPM). This gives the PICO-APL3 has a hardware solution that encrypts information and protect against viruses.

The 37-pound BFX1-24 is designed for deployable transit case integration where both image quality and display toughness are required. Both displays in the BFX are offered with bonded cover glass with anti-reflection and EMI surface treatments for MIL-STD-461G certification.

Qt 3D Studio provides a 3D user interface (UI) authoring system that caters to the technology requirements of both software developers and graphic designers.

Sciemetric Instruments has released the Leak Tuner Assistant, to help users take full advantage of the speed, accuracy and intelligence of Sciemetric’s 3520 Series Leak Tester.

The Lock 500 is designed for demanding industrial environments and opens new opportunities in security and office networking sectors.

The integrated Leidos and Nozomi Networks’ solution adds ICS intrusion detection and passive asset discovery and monitoring to Leidos’ Industrial Defender ASM. This strengthens the ASM’s ability to identify operational technology network assets and adds cutting-edge detection capabilities.

These servo-amplifiers are built into a fully enclosed aluminum case. Mode of operation is set by simple DIP switches. These drives handle a range of power supply voltages (from 11 to 70VDC) for a variety of power input requirements.

The KinetiMax has an integrated speed control loop with speed set input to adjust motor speed from 150 to 5000 RPM. It has a minimum operating life of 20,000 hours.

The RadEAGLET uses a multi-agent system-based algorithm that provides superior speed and accuracy for radioisotope detection and identification. This algorithm is intended to reduce the false ID’s and false alarms exhibited by older generation systems.

The QRW is housed in an industry standard ¼ brick package and features an input range of 9 to 18VDC, designed for applications powered by a 12V battery.

The device is a digital sensor with an NFC front end that can be integrated into smart labels. A unique ID as well as logged temperature and other data stored in its internal memory can be read by any authorized NFC reader such as a smartphone or tablet.

Certified for medical applications, the MPC102-845 is designed to be integrated with nursing carts and medical devices as a point-of-care terminal or infotainment terminal.

This release focuses on leveraging global connected data sources to unlock data insights across the extended enterprise for optimizing overall plant performance.

PickAPP is an Android application for an 8-10-inch tablet, configured with graphical operations designed to improve the overall user experience.

Bedrock OSA AD will be available as standard integrated functionality that continuously monitors the controller’s network and system time to detect intrusions and anomalous behavior.

The pairing is advancing the Internet of Things (IoT) by creating a turnkey, smart home system for operators that integrates gateways, sensor devices, cloud platforms and mobile applications.

Emerson SolaHD SDN2X redundancy modules continuously monitor two power supplies connected in parallel. In the event one power supply fails, the SDN2X automatically changes over to the second power supply.

The Falcon4 cameras are powered by Teledyne DALSA’s 86 megapixel global shutter CMOS image sensor, which outputs up to 16 full resolution frames per second, and higher with windowing.

Offering smart diagnostics and remote proof-testing capability, the device is designed to provide reliable level detection while helping increase safety and efficiency of both plant and workers.

The VC155 digital multimeter is designed for measuring and displaying electrical parameters up to a maximum of 600V. The unit’s DC voltage measurement range is from 0.1mV up to 600V; and the AC range is from 0.1V up to 600V.

The 0RQB-D0W12LG module is a fixed frequency DC/DC converter that uses synchronous rectification to achieve thermal performance and conversion efficiency. The regulated and 2250 VDC isolated 12 V output comes with a baseplate for heatsink mounting and thermal management

With a color display, button operation and image capture/download capability, Camβ is designed for roving inspection tasks, documenting faults and inspecting large or immobile subjects

Combining an eddy current sensor and a capacitive displacement sensor in one housing, the concept of the new combiSENSOR from Micro-Epsilon is designed to enable enable precision thickness measurements of plastics.

Enabled with IO-Link technology, the Bulletin 871FM sensors deliver more comprehensive diagnostic and parameter data to the controller over EtherNet/IP from the IO-Link master module.

With its Sinumerik CNC software release 4.8, Siemens is making a range of new functions available to improve the speed, precision and safety of machine tools. Features of version 4.8 include facility for compensating unwanted axis nodding movements and protection against machine, tool and workpiece collisions.

With an extended range of settings and process data options, the 12 mm wide EL922x EtherCAT Terminals are designed to meet diverse requirements and enable transparent system monitoring.

The newest release of Shapr3D integrates Parasolid and HOOPS Exchange to allow solid modeling and data translation locally within the app, taking mobile CAD experience to a new level unmatched by any other CAD tool.

The 9900CX uses 350kVA power modules mated to intelligent bypass modules. The bypass modules are available in 1050kVA, 1400kVA, 1750kVA, and 2100kVA, and are paired with up to six power modules.

Thanks to IO-Link integration, the level switches are Industry 4.0-ready. The communication interface enables each application to be configured using standard network components.

The new MQTT Client driver is a key component of the KEPServerEX version 6.4 release. Inclusion of this driver enables users to collect data from sensor networks and other devices that utilize MQTT

NI’s FieldDAQ are designed to acquire reliable measurements in the severe test cell and outdoor environments, including rain, sleet, snow or mud. FieldDAQ devices have an ingress protection rating up to IP67 (dust and water resistant), can operate in -40 °C to 85 °C environments and can sustain 100 g shock and 10 g vibration.

Version 11.4.5 of eMaint provides companies with an integrated system designed to improve the way organizations monitor equipment health and manage maintenance operations, resources, and compliance.

SBT can operate as an upgrade to an existing line or a replacement for a fail-safe PLC on a new build. SBT is a solution independent of a particular control system and network.

Potential uses for VIP Tower include, but are not necessarily limited to, energy plants, water municipalities, remote pumps and pipelines. VIP Tower is designed to improve local process efficiency, asset lifecycle management and service quality.

The transportation embedded system is suited for transportation-related applications such as security surveillance, onboard devices controller, truck fleet management, data transfer, and onboard passenger infotainment system.

Kuebler’s Sendix 5000 and 5020 incremental encoders are designed to overcome two common threats to encoder lifecycle: heavy vibration loads and misalignment due to installation errors.

The software is designed to open up potential in machine building, for instance, through consistent real-time synchronization with other automation tasks or support of track-and-trace solutions.

The modular maxGUARD system is designed to meet specific requirements for automation control panels. It contains three main cross-connection channels– positive, negative and internal signaling.

With a holding force of 112N, the 35DBM stepper linear actuator is suited for use in applications such as auto injectors, laboratory automation, medical pipettes and valve actuation.

The roller links have small ramps in front of and behind the rollers, which reduce noise during movement and help avoid hard impacts when the upper run of the chains is unrolled onto the lower run.

This system joins Logic Supply's ML100 Series of fanless NUC computers, and is powered by Intel's new Dawson Canyon motherboard.

Through support of TSN (Time-Sensitive Networking) functions, the coupler is designed to minimize delays caused by switches in Ethernet networks and the range of EtherCAT I/O Terminals and other EtherCAT devices used in TSN network environments.

With a capacity to communicate with more than 300 brands of controllers and support Modbus TCP/IP, MQTT and OPC UA Client / Server, the cMT-G01 Gateway is designed to enable integration of distinct onsite devices and facilitate data transmission to the upstream monitoring or data management systems such as SCADA, ERP, etc.

The AMP8000 integrates a servo drive directly into a servomotor. By relocating the power electronics directly into the machine, a control cabinet needs to house a single coupling module in order to supply power to multiple servo drives with a single cable via the distribution module.

The IEC 61850 for utility automation is the international standard to regulate a unified and standardized communication protocol for electrical substation and power grid automation.

With seven communications protocols, the TruONE ATS is part of the ABB Ability portfolio of software-enabled and connected solutions, with features including predictive maintenance and condition monitoring. The TruONE ATS requires a single wire and standard enclosures.

Operating on an open-based platform with Modbus RTU communication protocol, the Mirador integrates with sensors, communications, and software to provide full operational visibility, tracking, control, and analysis over chemical injection processes from a remote control station.

The C6030 is designed to be able to accommodate almost any automation and visualization task, including complex axis control, HMI applications, data handling and applications.

The cMT series model support multiple connectivity options, including MQTT and OPC UA, direct connection with data base, and more than 300 communication protocols.

EtherCAT joins Alicat’s offering of industrial automation protocol options, which also includes Modbus TCP/IP, Modbus-RTU, EtherNet/IP, DeviceNet and PROFIBUS communication options to fit new or existing systems.

The DigiFlex Performance panel and pcb mount servo drives offer full tuning control of all servo loops and are designed for distributed or centralized servo systems.

The Fluke 3560 FC Vibration Sensor wirelessly and remotely captures simple vibration screening data on imbalance and misalignment. Remote vibration monitoring allows maintenance managers to monitor asset health and reduce the reliance on vibration specialists.

This is intended to provide the ability to develop industrial IoT solutions on a shorter timeline for customers across various industries, especially aerospace and defense as well as energy and utilities.

Provided in a 4.5mm x 4.7mm x 2.5mm land grid array (LGA) apertured package, the AS7264N’s size makes it well suited for luminaires and connected sensor packs

The 7TCE is recommended for motor connections between servo controllers and motors on industrial machines, tray applications and moving machine parts, assembly handling and integrated production systems.

With the additional module, HARTING MICA is now able to capture and process data through SmartMESH IP (DUST), Bluetooth Low Energy and a XBee slot, regardless of the existing machine controls.

The new Double Gold Twitter delivers over 10,000w of qualitative power, fit for applications that require a reduced footprint and high power, such as large robotic vehicles, antennas and tracking systems, high power machine tooling, large printer rolls and more.

With this release, GE is bringing the same solutions to applications in oil and gas, water/waste water and other infrastructure industries with small and large assets requiring smaller footprints.

Applications include wet/dry detection, sump level detection, high/low level alarm and control, interface control in separation vessels, foam and sediment interface control, and agitation detection.

Typical applications include experimental stress analysis; electronics drop testing; printed circuit board (PCB) and finished product component reliability and subassembly testing; engine vibration monitoring; and fatigue life testing.

The SBC product family will benefit from multi-core scalability and will be available in various versions ranging from low power dual-core up to eight-core processor variants and beyond on VME and VPX architectures

By integrating Qt’s cross-platform framework, user interface (UI) development tools and machine-to-machine communication libraries with Azure, Qt will provide HW and OS independent access between the cloud and edge devices in manufacturing, retail, transport, logistics, smart cities and more.

The Ovation OCC100 controller extends Emerson’s Ovation control technology by managing the flow of energy from various sources to ensure continuous generation for these emerging industries. This scalable technology is also well-suited to critical water and wastewater applications.

Like YuMi, a dual-arm assembly robot introduced in 2015, the single-arm robot has a payload of 500 grams and is integrated into existing assembly lines

With HCME, HARTING has developed a series of devices that work according to the principle of direct imaging - open loop - and use rectangular cores.

The 125 x 95 mm system-on-module was designed for graphics-intensive applications over the Industrial IoT, including industrial control, medical imaging, digital signage, and gaming machines.

The RollVIA system is used for plasma applications such as surface activation for improved adhesion, carbon removal and descum/desmear for cleaner surfaces, and etchback, which removes a slight amount of dielectric contamination between internal copper planes during production of PCBs.

FANUC’s SCARA robots feature operation for pick and place, assembly, testing/inspection and packaging processes in a range of industries including consumer electronics, auto component, plastics, food and beverage, lab automation, appliances and medical device manufacturing.

ABB’s TruckMaster solutions are designed to increase personnel safety by maintaining a safe distance between personnel and equipment during operations, providing a means to avoid injuries such as internal arc events.

The capaNCDT DTV capacitive displacement measurement system measures the thickness of brake discs from both sides, enabling the exact determination of the so-called Disc Thickness Variation.

Simit enables real-time simulation and emulation for the evaluation of automation solutions. Testing and optimization can be carried out either using a real or a virtual automation system, the so-called virtual controller.

HARTING has developed a transmission principle which involves relocating the transceivers of the controller board into a pluggable module and thus integrates the optical interface according to the principle of "electrical plugging and optical transmission".

With its release the company augments PlantESP’s ability to support the diagnostic and optimization needs of single site, multi-site and enterprise process manufacturers on a global basis.

The migration combines a Unity M580 application converter with a migration expert configuration utility tool, which identifies operational gaps and provides recommendations to solve each customer’s unique systems challenges.

The controller is suited to act as an Industrial Internet of Things edge node in harsh locations including spray down manufacturing environments, test cells and outdoor locations without the need for a protective enclosure.

GE Healthcare is among one of the first customers that will implement this Plug & Produce solution. The “Shop Floor Integration for Life Sciences” module is a new addition to the ABB Ability Manufacturing Operations Management (MOM) offering.

The strain relief system is designed as a replacement for commonly used cable tie-wraps and other strain relief solutions.

Measuring 19 x 50 x 10 mm, and weighing 12 g, the iPOS2401 MX-CAT drive can be used in high precision positioning applications with any motor technology (brushless, stepper, DC/voice coil or linear) that requires no more than 1 A continuous at 24 V.

By offering low start-up current levels, this addition to the series is designed to open up greater application scope: for instance, to comply with sector-specific requirements in the process industries, or in fields requiring enhanced grid stability by reducing grid loads in the event of voltage dips.

Building upon the needs of Dataiku customers who have hundreds of users across their organizations around the world relying on the software, Dataiku 4.1 has been designed to accelerate scalable deployment while maintaining its core functionalities

Features include a service life of more than 10 years, continuous operation from -20°C to 55°C and no thermal runaway issues that are inherent in Lithium-ion chemistry

This data-driven analytics algorithm is delivered inside a module that fits directly into the controller chassis. Once installed, Project Sherlock AI leverages novel physics-based modeling to “learn” the application that controller manages.

This offering was designed for location-based control of equipment and facility resources. It is particularly suited for Industrial Control Systems (ICS) including Building Management Systems (BMS), Supervisory Control and Data Acquistion (SCADA) and Human Machine Interfaces (HMI) as described by U.S. Patent No. 9,819,509.

The SiteLink platform consists of three types of VPN routers and two antenna sets (Wifi and cellular). 5GB monthly data bandwidth is included free and subscription options include additional bandwidth (up to 50GB) and cloud data logging.

The digital controller is designed for thermoelectrics and resistive heaters where tight temperature stability is required. Stability better than 0.0009°C can be achieved with thermistors.

The Kvaser Hybrid 2xCAN/LIN is a dual channel CAN/LIN interface that provides a single tool for accessing both CAN and Local Interconnect Network (LIN) busses.

The IO-Link interface allows the user to automate the configuration of sensors. The inclusion of ATEX also enables the use of commercially available barriers. The sensors are suitable for hygienic and industrial applications.