Industry Products

As an Open Compute appliance, the FX-3810’s 4x PCI-E*16 FH/HL and 2x PCI-E*8 FH/HL can be leveraged for enabling network capabilities intended for various applications, most notably storage for hybrid or hot/cold data, data crypto/compression, video encoding/transcoding, and network acceleration.

The D4-454 and D4-454DC-1 provide all the capabilities of the D4-430, D4-440 and D4-450 CPUs, using updated microprocessor technology allowing the D4-454 to be the CPU of choice for the DL405 family.

These single and dual output DC/DC converters provide the features, power density and economy required by a range of board level power distribution applications.

Machinery that would benefit from the SolaHD SVL are ATMs, vending machines, building automation systems, industrial instrumentation and control equipment, test and measurement, and life sciences devices protected from excess shock, vibration or temperature extremes.

The VTU-DIN Series features zero to 5-KHz measurement for situations where the power supplied is non-sinusoidal (such as VFD applications), poor quality installations or other electrically harsh or challenging environments.

Q.Sonicmax’s design features the first eight-path ultrasonic meter to combine both reflective and direct paths. This enables Q.Sonicmax to detect and correct for disturbances in the gas flow caused by short inlets, extenders, reducers, manifolds, elbows and a range of other piping elements common in natural gas plants.

The MDWI08 family of DC-DC converters consists of 14 models offering 9‐36 or 18‐75 VDC input ranges with single output models ranging 3.3 – 24 VDC and dual output models ±12V or ±15V delivering 8 Watts of output power.

The tBOX100-838-FL is compliant with EN 50155, EN 50121, DNV 2.4, and IEC 60945 for use in rolling stock and marine industries. it was designed to withstand a temperature range from -40°C to +70°C and vibration up to 3 Grms, equipped with intelligent power management at wide voltage range 9-36VDC.

Experion SCADA is at the heart of Honeywell’s Experion systems and provides a scalable, integrated multi-service system with a human-machine interface (HMI).

Features of the ReliaGear UL 1558 LV switchgear that foster safety and reliability include safety shutters and insulating barriers between sections and around the bus compartment to isolate it from the cable compartment. Additionally, no ventilation is required in the front of the equipment.

Telit’s ability to offer the a portfolio of both integrated products and services, and Tele2 IoT’s connectivity solution, allows the companies for the first time to provide the market with simWISE, which is designed to improve the connection lifecycle management features of IoT deployments across the globe.

The Xtium series is designed to minimize CPU usage and improve processing times for host applications by enabling maximum sustained throughput and image data

The drive offers EMC and connectivity variants for integration and connectivity for machine builders that install hundreds of drives per year. There is a fixed space in the machine for automation and motor control, and the drive needs to meet the space restrictions and connectivity requirements (fieldbus, I/O etc.).

The MB991 is designed for a multitude of applications including medical equipment, industrial control and automation, ATM, kiosks and gaming machines.

This line of DC-DC converters from DATEL is a choice for military, industrial, distributed power architectures, telecommunications, and mobile applications.

Spotlight, Powered by MobiNET, is a secure technology that delivers real-time industrial data analytics on data collected from Programmable Logic Controllers (PLCs) and other automation devices (including IIoT), providing quantitative-based actionable information to drive industrial process efficiency.

One Series safety transmitters embed a process sensor, logic solver and safety relay in a single, SIL 2-certified field device. Although it looks like a traditional temperature or pressure transmitter, the ST can also switch final elements such as valves, motors, and blowers directly from the transmitter.

This latest addition to the AirPlus series is designed for primary power distribution to ensure grid reliability, efficiency and safety. It shares the same compact dimensions and advantages of the established ZX2 switchgear, but boasts a global warming potential (GWP) of less than one.

The systems are suited for applications in drinking water, industrial water, power and other industries where water is disinfected using chlorine.

The WLAN 1101 is designed for industrial environments. It is shock-proof, according to IK08, so it can even withstand strong mechanical loads.

Consisting of open hardware and software, the industrial PC RevPi Core 3 meets the EN61131-2 standard and, thanks to its modular structure, can be enhanced with digital and analogue I/O modules as well as suitable fieldbus gateways.

The FMC134 is suited for applications including traditional and bi-static radar; multi-channel radar; digital beamforming; wideband receivers; wireless communication SDR; and signals intelligence receivers.

AutoVISION 3.0.3 supports Vision Mini, Vision Mini Xi, Vision HAWK and GigE smart camera families and runs on Microsoft Windows 7 (32 and 64 bit versions) and Windows XP Professional.

The appliance and app are designed help improve reaction time for maintenance teams and assist decision makers with health and diagnostics analytics for industrial devices and systems.

With this version of groov, operators can trend more data over a longer period: up to 5 years. groov’s built in trend gadget now offers an interactive type of trend that handles many more data points.

The Matrikon UA Tunneller allows OPC UA-enabled client applications to communicate with OPC Classic Servers and Clients, as well as OPC UA Servers and vice versa

Typical applications for mass flow meters and controllers are in the areas of metal, glass or ceramic processing, coating technology or in the production of foams in the food and plastics industries.

The industrial-grade computer-on-module is aimed for industrial IoT applications, including industrial control, medical imaging, digital signage, gaming machines, military, and networking.

The VCS20-20-03-MC-01-XYZ is a closed loop voice coil driven XYZ positioning stage. It is ideal for three axis positioning applications.

Version 1.1 added a "Siemens S7 Application Connector", logical and mathematical functions for data processing, and a command line interface (CLI).

The pencil probe is designed to increase measurement accuracy and expands the 137B series of quartz, free-field ICP blast pressure pencil probes, reducing the need for multiple single-sensor probes.

The DSRK strain probe from Baumer is designed for tie bar strain measurement. Containing no elastomers, it can be used at ambient temperatures up to 85°C, and does not require subsequent recalibrations due to age.

ProSense TSDA25 series temperature switches are designed to offer temperature monitoring and control with setup via mechanical adjustment dials.

Using a browser, TraceLink AVM customers login to a web portal and review any aspect of the validation lifecycle, including the validation plan, traceability matrix, test results and final validation certificates.

These include the single axis Model 2220 or triaxial Model 2470, featuring aluminum housings and a standard 1 meter integral cable; the single axis Model 2240 or triaxial Model 2480, featuring hermetically sealed titanium housings and an integral connector; and the single axis Model 2276 or triaxial Model 2476, featuring aluminum housings and an integral connector.

This HMI features a 7-inch wide display with 800 x 480 resolution for clear image quality and is equipped with a remote connectivity option through a VNC server.

The HIPERFACE DSL open interface is designed to bring together all the advantages of a digital real-time interface: One Cable Technology, and continuous condition monitoring.

The E2M features a solenoid valve integrated with a pressure and a flow sensor in one package. These units flow up to 5,000 liters of compressed air per minute, program, and can connect to Festo MS series air preparation units.

This speed advantage makes the F58 encoders suited to packaging, textile and printing applications—or any other application with fast machines that could be even faster with a position sensing upgrade.

The WPBHC-series RJ45 bulkhead couplers are available in both Category 5e and Category 6 versions and are shielded for maximum EMI/RFI protection.

The MPX3500 has a 15 kg wrist payload capacity and a 25 kg upper arm payload capacity, enabling spray equipment to be mounted directly on the robot arm. It also features a 2,700 mm horizontal reach and ±0.15 mm repeatability.

CX0 Series basic area sensors have a sensing distance of up to 6m and a detection height up to 320mm. CX2 Series advanced area sensors also have a sensing distance of up to 6m with detection height of up to 960mm and offer analog outputs and a blanking function.

This interface option is in addition to the previously announced SSI, EtherNet/IP, EtherCat, Powerlink, Profbus DP and Profinet interfaces.

The SAL18 series RF admittance level switch features a local LED indication, 20-250VAC/VDC universal power supply, pushbutton calibration, independent adjustable time delay for each material absence and material presence detection and can work with target materials with a dielectric constant down to as low as 1.5.

The LNP-1002G-10G-SFP-24 is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as, manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

The HeiMotion Premium (HMP) brushless AC servo motor is engineered for use in the machine tools, autonomous vehicles, robots, medical diagnostic equipment and similar applications.

FCI’s MT100 Series Air/Gas Flow Meters provide temperature-compensated direct mass flow measurement of air and gases for repeatable measurement in large diameter pipes, stacks and rectangular duct installations

NEXCOM's latest series of EtherCAT slave I/O modules provides EtherCAT communication and compatibility for machine control and robotic control applications.

The LNX-1202G-10G-SFP is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh and outdoor environments, such as manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation.

Designed for a variety of applications including asset management, data acquisition, environmental monitoring and facility management, the SeaConnect 370 originally emerged as a solution for sign monitoring and notification.

The network security platform features six Gigabit Ethernet ports using Intel i211 Ethernet controller, and one pair of LAN bypass function.

The V-731 is equipped with incremental linear encoders for direct position measurement and 3-phase electromagnetic linear motors. Fields of application include micro-assembly, biotechnology, precision laser machining, optics, lens testing, and photonics alignment.

With S-mount lens holder, the See3CAM_CU135 is a solution for Medical applications such as digital microscopy, Document Scanning cameras, Optical Character Recognition applications, smart surveillance, smart parking lot management applications, high-resolution Microscopic/Magnification applications, Drones etc.

The HART Multiplexer System by GM International is designed to offer the possibility to reduce the number of multiplexer modules, while maintaining ability to control up to 7936 channels.

RTVN version 18.0 is designed to advance the company’s vision to provide intelligent consumer-driven business networks to organizations across a range of vertical markets, including Retail, CPG, Electronics, Automotive, Defense, Pharmaceutical, Healthcare, and Logistics Services.

The ID/MV-30 includes USB connectivity, and may be plugged directly into the PC to power and go. The ID/MV-40 features Ethernet connectivity and a separate power supply.

The sensors with a cable outlet are provided with a cable suitable for E-chain use, and a semi-transparent LED ring at the sensor end, which shows the sensing state from any viewing angle. The sensors are IP67 rated, and have an operating temperature of -25 to 70 °C.

This family of serial device servers and gateways support most common industrial protocols, with various combinations of HART, HART IP, Profinet, Modbus TCP, Modbus RTU, Raw/ASCII, and EtherNet/IP.

The QF-50 is designed for optical positioning applications requiring precision and throughput coupled with long travels. It offers 400 μm closed loop and 450 μm open loop travel, 0.01% linearity, sub-nanometer resolution, and 4 nm bidirectional repeatability.

The Transport LCU, which is now available for supply, is installed inside the locomotive and serves as the controlling system for remote, wireless control movement of a locomotive through a railyard and is designed as a small space solution.

These controllers can drive up to 500A at 60V, or 300A at 96V respectively. This power capacity makes the controllers a solution for electric vehicles, material handling robots, electric boats or agricultural robots.

The Series is designed to facilitate multi-axis force, torque/axial and torsional load measurements within robotics, factory automation, machinery and tooling, agricultural and off-highway vehicle, and materials testing applications.

In the Han K32/55, the crimp contacts of the D series and D-Sub series are built into a single closed unit, allowing the connection of a maximum of 32 power contacts (10A 250V 4kV 3) and 55 signal contacts (4A 50V 4kV 3).

This 3.5” embedded SBC is a solution for IoT/M2M related applications, such as industrial automation, self-service terminals, digital signage, POS/kiosk displays, medical, and more.

The platform, for data acquisition common in machine-building applications, includes PROFINET master or slave operation, I/O configuration, and “last-breath” operation in the event of power failure.

With the TRENDview feature, operators and end users can view Single-point and Multipoint Trend Logs in a selectable list, in flexible layouts to maximize the amount of room for analog and digital data.

The device facilitates readout of flow volumes by showing liter or cubic meter measurements on a display that can be rotated for better visibility.

The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. It utilizes a 64-bit DSP processor with FPGA technology for required extensive calculations.

The units are available with 3 standard travel ranges from 25 to 100mm in both open and closed-loop configurations. The closed-loop models incorporate a incremental encoder with nanometer resolution.

Hardy HI 6020 models use two core Hardy technologies: C2 electronic calibration and Integrated Technician (IT). Weighing applications include: batching/blending, filling/dispensing, level-by-weight, inventory management and product inspection.

This combination from Microchip Technology is designed to give customers the ability to increase their application’s color resolution and display size (up to 12 inches) with MCU-based resources and tools including the MPLAB Integrated Development Environment (IDE) and MPLAB Harmony software framework.

With features like megapixel cameras, integrated electronic access control, and perimeter intrusion detection with real-time central station monitoring, the systems are designed to meet the unique security demands of a manufacturing environment.

The Ex9S32 Manual Motor Starters are electro-mechanical devices that combine a number of functions in one unit, including disconnect for motor branch circuit, manual motor control, branch-circuit short circuit protection (magnetic protection), overload protection (thermal protection - Trip class 10) and switching (manual).

Up to six ECMs can be mounted on the MMS8010 3U VPX carrier, while the MMS6245 XMC can host up to four ECMs. ECMs can also be mounted on PMCs, such as the MMS5918.

NEXCOM has increased the industrial panel PC family with the addition of 15”, 15.6” and 21.5” sizes to meet the need of advanced human machine interface (HMI) terminals in automated manufacturing.

The LNX-2602G-SFP series is industrial-grade equipment that is Ethernet ready to fulfill various markets’ edge-level networking applications in harsh environments, such as, manufacturing automation, security surveillance, power/utility, water wastewater treatment plants, oil/gas/mining, and transportation. This switch is also designed for setting up a dedicated network for optimizing VoIP and video application.

Positioned at the heart of the company’s line scan cameras, this class of sensors enables monochrome, color, and near-infrared (NIR) imaging for document scanning, parcel sorting, glass, and wood inspection

To meet the demands of most industrial environments, the FID-11x series has a standard operating temperature range of -5° to +60°C and 3H pencil hardness.

Installed under the spark plug or head bolt for monitoring of engine performance and critical over-temperature conditions, the stem design allows for installation in high temperature areas with limited clearance.

These FDA/USDA/3-A Dairy compliant scraper seals are designed for pharmaceutical, medical, food, and dairy processing applications.

The technology fosters OT & IT collaboration for enterprise-wide protection of critical infrastructures such as power generation and distribution, water and wastewater, transportation systems and infrastructure like trains, bridges and tunnels, intelligent building management, manufacturing, oil and gas, and other applications that rely on high availability industrial automation.

This combination creates a full transceiver that can transmit and/or receive wide-bandwidth signals of up to 2 GHz of bandwidth in real time, covering spectrum from 27.5 GHz to 29.5 GHz

The LMS-180 is designed for applications where resolution and constant velocity is required, such as in optics inspection, metrology, photonics, interferometry, and semiconductor test equipment.

The SWM24 integrated steppers combine NEMA 24 step motors with a 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

The Ti450 SF6 allows utility crews to include it as a normal part of their maintenance routine, allowing them to conduct both infrared and gas inspections whenever and wherever necessary.

This ergonomically designed machine allows non-stop production for rolls up to 36” diameter and weighing up to 900 pounds. The splicer loads rolls directly from the floor without requiring any additional material handling equipment, by using a turreting roll lifting concept.

The cDAQ-9185 and cDAQ-9189 provide time synchronization with TSN to simplify and improve scalability of synchronized, distributed systems.

When installed straight out of the box, the Stratix 2500 industrial Ethernet switch can prioritize critical industrial network traffic. It also can be configured for application-specific needs.

The Honeywell Sotera platform will support connected worker offerings such as two-way communications, geo-location and automatic safety alerts to provide employers with real-time awareness of safety incidents and the ability to respond quickly if an employee is injured in a remote location.

Jabil’s InControl SaaS is a multi-tenant, intelligent digital supply chain cloud platform that provides connectivity, analytics and machine learning technologies to optimize real-time decision-making for supply chain practitioners.

The Vortab Company’s elbow flow conditioner nearly eliminates the flow meter upstream piping requirements by conditioning the flow stream into a flow regime, mimicking adequate straight run.

FCI’s ST75V Air/Gas Flow Meter offers an alternative solution for heat treating process control that provides direct mass flow measurement for accuracy, operates over a wide turn-down range and supports all common and specialty fuel gases.

The VG380 is offered in two package/interface options, VG380SA and VG380ZA. The VG380SA is a 41x48x22mm module designed for standalone applications, including built in power conditioning (compatible with power supplies from 9 – 32V), and with RS-232 / RS-422 interface.

IONI implements industry standard, torque, velocity and position controls for AC, brushless DC, brushed DC, linear servo motors and stepping motors between 2 W and 700 W power.

ATE Core Configurations deliver core mechanical, power and safety infrastructure designed to help users accelerate the design and build of automated test systems in industries ranging from semiconductor and consumer electronics to aerospace and automotive.

The NCA-1031, powered by the Intel Atom x7-E3950 or x5-E3930 processor, is a desktop form factor network appliance designed for entry-level network security, gateway or vCPE.

Perle IDS-500 PoE Industrial Managed Switches come with a PRO Feature Set to meet the needs enterprise-grade level environments where additional security and network integration functionality is required

The FS10i Flow Switch/Monitor features an air/gas sensitivity and setpoint range from 0.25 to 400 SFPS [0.076 to 122 MPS] and for water or liquids from 0.01 to 0.5 FPS [0.003 to 0.15 MPS].

The SWE440 provides an Ethernet-based system interconnect that allows single board computers, digital signal processors, graphics cards, sensor I/O cards and others to pass data at multi-Gigabit speeds

The PAC is Parker’s machine controls solution that combines PLC, HMI, and motion control functionality into a single device. Likewise, the PAC is programmed using a single integrated development environment (IDE) called Parker Automation Manager (PAM).

The Fluke 729 Automatic Pressure Calibrator is designed to simplify the calibration process by automatically generating precise test pressures, compensating for leaks, and automatically documenting the pressure calibration process to help meet compliance and regulatory requirements.

The 1.0 release of LabVIEW NXG is intended to help engineers performing benchtop measurements increase their productivity with nonprogramming workflows to acquire and iteratively analyze measurement data.

With its protocol configuration, mounting design, and interface, the SDS-3008 is a networking solution for virtually any Smart Factory application. It supports the core industrial protocols -- EtherNet/IP, PROFINET, and Modbus/TCP -- and includes built-in network monitoring and control functionality.

By wirelessly communicating with an iPad, Moku:Lab enables technicians, researchers, and students to interact with their experiment and stream data in real-time from anywhere in the lab.

This calibration verification system is designed to lower flow meter operating costs in flare gas applications aboard offshore platforms, at land-based oil/gas facilities and in petrochemical plants.

Distrix’s SDN technology, running on RAM devices, is designed to speed deployment of communication networks between industrial devices and IIoT cloud platforms, and deliver security for remote machine access.

Based on the ARM Cortex-A5 core with floating-point unit (FPU), with a 32-bit wide DDR controller that offers up to 1600MB/s of bandwidth, Matrix-710 is a choice for applications requiring computing and data processing.

Based on the QuadPod architecture from JTAG Technologies, the JT 2147/eDAK is an enhancement of JTAG ‘s current DAK interface and has been specifically designed for high-integrity ATE systems.

All models of the MPV4080S family are packaged in a 4.9 x 2.9 x 1.57 inch, encapsulated case. Each model is specified for operation over the operating temperature range of 40° C to +70°C ambient. Cooling is by free-air convection.

The solid-state operation of the Lifeline 5 cable-pull switch offers an electronic, rope-monitoring system to compensate for thermal expansion and cable sag.

The CMS-700 energy monitor and control unit can integrate up to 96 sensors, which can be displayed and processed using the built-in web server, Transmission Control Protocol/Internet Protocol (TCP/IP) or a Modbus Remote Terminal Unit (RTU).

SMAC electric grippers incorporate programmable speeds, positions and forces with data feedback. This makes them suitable for a range of positioning, measuring, and inspection applications.

With this latest release, modules are provided to expand the range of applications possible with SMARTDAC+ systems. New functions include sampling intervals as short as 1 millisecond and the control and monitoring of up to 20 loops.

Applications for the PHS series are to be found across industrial, medical and transportation markets, and specific ones include robot joint angle control, motor drive units, 3D printers, rotary angle sensors, HAVC sensors, and shift-by-wire gearshift systems.

The PIC32MK MC devices combine 32-bit processing with advanced analog peripherals such as a quad 10 MHz op amp, comparators and motor-control optimized Pulse Width Modulation (PWM) modules.

The GVC1000 is designed for a range of military and commercial applications - particularly vision computing, embedded training, 360° situational awareness and advanced digital mapping, as well as data-intensive intelligence

Designed for industrial and manufacturing applications where it’s necessary to monitor data to ensure goods don’t fall outside of acceptable parameters, the ultrahigh frequency (UHF) RFID Sensor Tags enable environmental condition monitoring throughout the shipping journey, for example, of temperature-sensitive pharmaceuticals or perishable products packed with dry ice.

QualityWorX Vision, a data management and analytics platform that harnesses machine vision image data, is intended to enable manufacturers to improve and optimize their investments in machine vision inspection.

This series is targeted at the automotive, food & beverage, packaging, and power generation industries where the application doesn’t require more extensive agency compliance.

FCI’s FLT93 Switches are ideal for applications in many demanding process industries. They also used extensively chemical processing, food/beverage, mining/milling, oil/gas, pulp/paper, pharmaceutical and more.

When many of today's devices and fieldbuses were developed, Internet, Industrie 4.0 and Big Data were still unknown. Therefore these systems lack any security features for a direct networking, such as access protection with password or signed firmwareupdates. To make existing sites „Industry 4.0-fit“ MB Connect Line and Deutschmann Automation have developed the Secure Cloud Gateway mbXLINK.

With mbNETFIX presents MB Connect Line a new firewall that has been developed for use in industrial plants. It provides protection against external attacks and fulfills the special requirements of industrial communication such as segmentation, coupling of different networks as well as the control of communication on the packet level.

The system uses Standard ATE Production IC Test Systems at DA-Integrated along with Rohde & Schwarz's R&S ZVA 67 GHz Vector Network Analyzer (VNA) to create a volume production test system capable of handling RF & millimeter wave integrated circuit devices.

The AS7261 JENCOLOR XYZ sensor is a complete platform for color sensing, intended to ease design-in and simplify production processes for manufacturers of professional or consumer colorimeters and color analysers.

The optoNCDT 2300-2DR laser sensor is especially suitable for reflective and shiny targets. The sensor is for example used in thickness measurements of flat glass, distance measurements on annealed glass and assembly monitoring of small parts

The solution, developed in collaboration with Intel and third-party logistics companies, provides real-time information about the location and condition of critical freight while in transit. The solution was introduced during Honeywell Safety and Productivity Solutions’ launch event.

These NS-Series NSF (National Sanitation Foundation) certified valves (from GC Valves) are a choice for food and beverage grade potable water applications.

The PSC-T54L is designed for industries including paper, powders, food and ceramics to wallboard, thermoforming, composites and glass.

The Sciemetric Studio suite enables manufacturers to visualize, review, report on, compare and analyze part data to improve quality and yield on the production line.

Through PE Smart Urban Network, cities can connect and control a number of services such as street lighting, public parking, energy distribution, solid waste collection, public Wifi, video surveillance, emergency response support, and more.

The transducer uses the latest generation of AMETEK’s magnetostrictive position-sensing technology to give absolute analog position, accurate to 0.04% of the programmable sensing distance.

Siemens is presenting new CPUs and 15 and 19 inch “Blackline” panels in widescreen format for the Sinumerik 840D sl CNC. The 7x0.3B PN processors are Profinet-compatible NCUs (Numerical Control Units).

The EME can be used for applications in the microscopy. The features of EME can be extended, so that it can be integrated into a fully automated, industrial inspection process.

The camera is designed for use in robotics or applications which require repetitive camera movement, as well as for any application where space is at a premium.

PI’s C-663.12 motion controller is designed for 2-phase stepper motors, in open-loop or closed-loop operation commanded by USB or RS-232.

The design is ideal for optical and scanning probe microscopy or other inspection or manufacturing applications where two-sided part access is required with three-DoF manipulation.

The SS-7 is designed to be embedded into a hydraulic cylinder and utilizes the gun-drilled piston rod as a target, sensing it’s position with-out the need for a magnet.

It comes supplied with a crossed roller bearing. The motor coil is the moving part of the assembly in order to reduce the moving mass of the system. Power is supplied to the motor via a flat ribbon cable.

The single-turn encoder is equipped with three electrically isolated Hall measuring systems to meet requirements in safety-related applications, i.e. in cases where redundant signals for monitoring do not suffice or additional signal outputs are needed to visualize the process.

The Fluke 438-II analyzes three-phase power quality measurements and uses an innovative method developed by Veros to calculate motor output torque, speed, horsepower and efficiency.

Due to their ability to connect actuators and sensors to RFID read/write heads simultaneously, the block modules are ideal for retrofitting RFID applications.

The GE Digital APM suite covers the full spectrum of APM services from risk assessment and asset strategy development through condition-based maintenance (CBM), predictive maintenance, reliability centered maintenance, root cause analysis, and inspection and compliance management.

The CPX portfolio offers a selection of screen formats, sizes, installation options and features. The range of formats includes 15 inch (4:3), 19 inch (5:4), and 21.5 inch (16:9 widescreen) versions.

The model 455 solenoid which features an explosion-proof case and ATEX and IECEx certifications for gas and dust for zones 1 and 2. This model is addressed to demanding hydraulic applications.

With I/O terminals that feature explosion protection, the ELX series expands the Beckhoff EtherCAT Terminal system, which already offered more than 100 different signal types.

EPLAN Cogineer is fully integrated into the EPLAN Platform shared by EPLAN Electric P8 and other EPLAN software products. This allows users to create project data in EPLAN Electric P8, and then generate the schematics using that data in EPLAN Cogineer without any duplication of effort.

Using magnetic paddlewheel technology and electronics, the EPR continuously measures the flow of liquids in pipes with a velocity range of 0.98ft/s~32.8ft/s (0.3m/s~10.0m/s) in pipe sizes from ¾” through 2” (DN20 to DN50).

The LPC-815 & LPC-835 can operate on a range of 9-48V DC power input making it a fit for mobile, marine, transportation, field and remote based applications.

The technology brings the user experience of multi-touch HMI, such as on a mobile phone, to car drivers and passengers in screen sizes from eight to 15 inches.

Fluke Accelix (Accelix) is an open, cloud platform that connects maintenance software, equipment and critical plant systems.

Linear applications within these and other industries include conveyers, rail positioning, pushing applications/part eject, X-Y tables and filling stations. Rotary applications within these and other industries include indexing tables, material feed, cut-to-length, labelers and winding.

Through the system, operators can identify changes in the flow stream and the smallest amounts of saline water at high levels of sensitivity. This enables the operator to take immediate remedial action to prevent threats to production, such as scaling, hydrate formation and corrosion.

The QDH20 features two bearing sets holding the output shaft, and two more bearings along with a spring mount to isolate the working pieces of the encoder from mechanical stresses.

The Ex9CKT Series is designed for a variety of HVACR applications, including air conditioning, resistive heating, refrigeration equipment, motors, welding, pumps, power supplies, foodservice equipment, compressors and various business machines.

The ENX EASY is a steam sterilizable encoder. The encoder can be integrated into the brushless drives ECX 13 and ECX 16 SPEED (up to 120,000 rpm and 104 W) without any increase in length.

AutomationDirect has added 14 new assorted Wera tools including miniature and insulated screwdriver sets, a driver-bit set, metric and Imperial T-handle and L-key hexdriver sets, an impact driver set and adjustable torque screwdrivers and torque wrenches.

The RIOX-1216AH .is intended for use in robotics navigation, unmanned vehicles, stabilization systems and any other applications that need interfacing to the physical world.

Based on Microsoft Azure Cloud, Tetra Pak’s Condition Monitoring service provides real-time analysis of operational performance data from more than 5000 connected filling machine lines around the world.

The PXS24 series will cover a rated current range up to 16 A. In addition to selective overload protection for control circuits, special features of the system include integrated control and switching and signaling functions.

The PGC5009 represents process analytics for simulated distillation analysis using fast temperature programmed process chromatography.

The Rosemount 5408 has been designed to simplify operator tasks. Pictorial instructions and a software interface guide the operator through installation, commissioning, proof-testing, operation and maintenance.

This latest version supports Windows 10, and the STARDOM CPU module comes with a new function that enables Java applications to run on a STARDOM controller. In addition, an oil flow rate calculation function has been added to meet the needs of oil and gas well operations.

Werum’s Plug & Produce solution allows integration of machines and automation systems into a pharmaceutical production environment.

This system includes backplates with integral three-phase busbars rated at 125 A, complemented by feed-in terminal blocks and adapter plates for motor-protective circuit breakers, motor starter combinations and soft starters.

This most recent release includes a range of innovations, from harmonizing development platforms deep within the software to providing enhanced screens and reports for the user interface.

Typical applications for ImageFlex include Degraded Visual Environment (DVE), 360° situational awareness, helmet mounted sight processing, and target identification and tracking.

With these modules the power management company can provide machine and system builders the possibility of integrating a larger number of sensors and actuators into a SmartWire-DT line.

The solution integrates Huawei's EC-IoT gateways and Agile Controller, GE's Predix platform, other partners' sensors and controllers, and industrial applications to construct information channels between industrial networks and an interconnection platform.

The object-oriented approach of the Simatic PCS 7 Plant Automation Accelerator enables users to work on a central data platform, for integrated planning based on an electronic workflow, starting with plant engineering through to automation

Dragos’ WorldView intelligence insights is designed to give electric power, advanced manufacturing, oil and gas, petrochemical and other ICS operators visibility into threats jeopardizing control systems’ integrity and reliability.

Intended for use by discrete and process industry manufacturers, commercial customers, and automation original equipment manufacturers (OEMs), Matrikon FLEX is a developer toolkit that enables any application, regardless of size, with OPC UA.

Used in conjunction with Avago’s chipset, TT Electronics’ HM210-05K060LFTR is suitable for a range of industrial applications including inverters, uninterruptible and switch-mode power supplies, automation systems, DC/DC converters, renewable energy inverters, and AC and brushless DC motor drives.

The converter cabinet provides scope for feeding into public grids as well as the creation and operation of microgrids, for instance by integrating renewable energy sources such as wind or solar.

The controller is suitable as a universal data node for a range of applications. An integrated OPC server enables standardised data transfer in M2M communication, enabling integration into the automation architecture and creating a simple path towards Industry 4.0.

The zenon Process Recorder is suitable for manufacturing companies such as food and beverage manufacturers or pharmaceutical companies and is also suited to power supply companies.

Parker AC30 variable speed drives with the new P and D control modules now have greater functional capability to meet the needs of advanced system applications. In addition, the AC30 series power range has been increased from 100 HP to 350 HP. New features include optional closed loop operation, dual encoder inputs with registration mark inputs, I/O expansion options.

The Topboard can drive an industrial I/O Baseboard in the form of a complete PLC. It is M0+ based Arduino compatible PLC. It offers direct 24V digital I/O and 4-20mA/0-10V analog I/O control using Arduino code.

SAP and Hilscher executed a co-development on implementing a bi-directional integration of the sensor / actuator level via the netIOT Edge Gateway from Hilscher to the SAP Asset Intelligence Network (AIN) and the SAP Cloud Platform.

These innovations are designed to offer the user enhanced process reliability and make the PushPull fit for demanding applications. The HARTING PushPull V4 Industrial – for Data, Signal, and Power in a modular concept.

These RTUs can be used for the implementation and monitoring of measurement points for important process data such as level, flow and fill level, as well as pressure and temperature, even for plants spread over a wide geographical area.

The TRH150A Series features a universal input voltage range of 90~264VAC and are available in single output voltages of 12, 15, 18, 19, 24, 28, 36 and 48VDC.

The Condence platform can be utilized in remote monitoring and control applications and it enables condition monitoring information to be coupled with relevant information on asset use, location, energy consumption and performance.

The SubMonitor Connect provides capabilities of real date and time-stamped system monitoring to improve troubleshooting while protecting three-phase motor and pump systems ranging from 1 to 700 hp, or those that require up to 1000 amps.

Ideal for any folder gluer that is being hand-packed, PackMate combines case erecting and positioning for packing in semi-automatic operation.

The module means that users can see the benefits of compressed air technology in frequently converted production facilities, too – e.g. in assembly plants, processing cells or production modules for loading and unloading machines.

These innovations are a part of GE’s Industrial Internet Control System (IICS). IICS is an Industrial Internet of Things (IIoT) solution that connects thousands of machines to the power of the cloud and brings computing to the edge.

The firmware allows devices to be connected to the cloud-based open Internet of Things (IoT) operating system MindSphere – for instance over the industrial IoT gateway Ruggedcom RX1400 with MindConnect or with the cloud gateway MindConnect Nano.

With the new Modbus content and metadata extraction functionality, vendors of security products, such as firewalls or gateways, gain granular visibility and control of the Modbus protocol communication

The Voice of the Machine IoT platform is an open, interoperable and scalable ecosystem of connected products and services. Every connected product uses the same repository of digital services with an exchange-based platform architecture, designed by software experts at Exosite.

This next generation offering includes an interface with improved visualization, smarter navigation and is integrated with the Schneider Electric Industrial Software portfolio –extending new and existing solutions with capabilities that digitally link the Engineering, Operations and Asset Performance aspects of the industrial value chain.

• Intel® Atom™ Processor E3900 Series • Mini-ITX • 2 DDR3L 1867MHz SODIMM up to 16GB • Three independent displays: (VGA/DP++) + (HDMI/DP++) + (LVDS/eDP) • DP++ resolution supports up to 4096x2304 @ 60Hz • Multiple expansion: 1 M.2, 1 PCIe x1, 1 Mini PCIe • LPC EXT-RS232/485 module extends additional 4 COM ports • Rich I/O: 2 Intel GbE, 6 COM, 4 USB 3.0, 5 USB 2.0

Fluke Process Instruments has equipped the data logger with a polycarbonate casing that withstands harsh treatment and heat up to 100 °C without distortion and without harm to the electronics.

With its TIM 1531 IRC communication module, Siemens is extending its telecontrol product spectrum to include modular RTUs (Remote Terminal Units) on the basis of the Advanced Controller Simatic S7-1500

RF switches are microwave devices that route high frequency signals through transmission paths and can be used for diverse range of applications including WLAN, Mobile Communications, Wireless Security, Wireless Home Automation, Digital TV and many other RF products.

Featuring Konrad’s test technologies and expertise, this manufacturing inline test system integrates with board handling equipment, including conveyors and short stations and is suitable for straightforward integration into production or testing lines.

The housing, connectors, lens barrels and cables all meet the requirements for protection class IP65/67 and protect cameras from dirt, dust, water splashes or cleaning agents as well as accidental shifting of the optics.

Enact helps users process critical quality data that today’s modern manufacturing operations require. Advances in mobile and cloud computing, automation, and the IIoT enable Enact to aggregate data from disparate sources and input methods, uncover strategic information, and prioritize enterprise-wide quality activities.

The LCA6 is designed for electronic pick-and-place, biomedical dispensing, and QC measurement.

This vision system performs precise inspections that keeps pace with increasing line speeds. The In-Sight 7000’s modular design offers over 400 different field configurations.

When used in conjunction with the CAD environment enabled by FactoryLogix, the output data from CyberOptics’ AOI and SPI machines allows for a digital view of the collected defect data that extends down to the pin level.