Industry Products

Fluke Condition Monitoring consists of wireless sensors and a gateway that receives signals from the sensors from up to 30 feet away and works with Fluke technologies, such as iFlex current probes, current clamps, temperature sensors and three-phase power monitoring.

IXARC encoders with the CANopen communications interface are a good choice for applications in vehicles, mobile machinery, cranes, lifts and offshore equipment.

EPLAN will conduct demonstrations of EPLAN Smart Wiring at the company’s booth (#1915) at Automation Fair, Nov 9-10 in Atlanta, presented by Rockwell Automation.

The Ethernet IP Marquee is a marquee sign that connects and communicates on the Rockwell Ethernet/IP network. The Ethernet IP Marquee has a built-in WEB server, eliminating the need to install software to program the sign.

With maximum continuous torque up to 98.5 mNm and higher stall torque, 22ECT motors are ideally suited for use in applications such as Industrial automation, power tools & robotics.

The modular Han-INOX connector series is designed for outdoor applications and use in the food industry and process technology.

The DRM-24V480W1PN has built-in active PFC and an efficiency of 94.17% typ. @ 230Vac. Additionally, the product also includes built-in DC OK contact; LED indicator for DC OK/ Overload; full power from -25°C to +60°C operation at 5,000m or 16,400 ft. altitude.

Standard features include EN 55022 B emissions, active power factor correction to EN 61000-3-2, I/O isolation of 4 kVAC, and up to 93% efficiency. a standby 5V output.

The Table Top Assembly System comes complete with sensors, controls, software and safety equipment to provide a virtual turn-key solution that can be up and running in 30 minutes

AVEVA Connect is a Software as a Service (SaaS) ecosystem for Engineering, Design and Information Management Products.

The Sirius 3RN2 replaces the preceding 3RN1 series, and with widths of 17.5 and 22.5 millimeters these relays require less space in a control cabinet. A standardized supply voltage reduces the number of versions.

When paired with a sensor, this lighting relay can provide occupancy-based on/off as well as daylight harvesting functionality. The relay can also be paired with a wireless light switch for localized control as well as dimming.

The E-727 is designed for multi-axis nanopositioning applications, such as 3D imaging in super-resolution microscopy, laser beam steering, and fast alignment applications.

the 700HPPK Pneumatic Test Pump Kit is a solution for generating high pressure in the field to devices under test (DUTs), such as transmitters, controllers, pilots, analog gauges, and more.

This range is suitable for the Oil & Gas and Specialty Chemical industries that need fast and efficient condensate removal.

EERAM is a standalone SRAM memory with shadow EEPROM back-up on a single chip that helps automatically retain contents of the SRAM memory when system power is lost.

APL vision inspection systems are designed for a broad spectrum of components. Quality control checks, OCR (optical character recognition) and batch sorting applications are a few examples. The systems have been developed to meet high speed quality control requirements for 100% inspection. Our experience with handling systems is key to offering a total solution when integrating vision software.

SureMotion MXL series timing belts are 1/4-inch wide, have a 0.080-inch pitch, and are available in neoprene with fiberglass reinforcement and urethane with polyester reinforcement styles. Also referred to as sprockets, MXL-series aluminum timing pulleys have a 1/4-inch width and feature a smooth bore with setscrews, a 0.080-inch pitch and range in size from 10 to 120 teeth.

APL Robotic and Vision guided handling systems are versatile units, that have the ability to singulate and manipulate a diverse range of components, including plumbing fittings, plastic mouldings and confectionery. The systems have been developed to automate components from bulk, inspect manipulate and place into the down stream equipment.

Designed to meet the rigorous timing requirements for industrial automation, the reference solution delivers EtherCAT cycle times of 100 microsecond cycles (10,000 frames per second) with a low jitter rate for precise device synchronization.

The Go-Scan systems are designed for industrial X-ray inspection and non-destructive testing applications in the Oil & Gas, Petrochemical, Shipbuilding, Aerospace, Defense and other related industries.

Predictive Asset Analytics Suite is designed to bridge skills and process gaps with smart technology, combining advanced predictive analytics with knowledge management and decision support to maximize asset availability.

The PCIe-GIE72/74’s utility and APIs provide real-time PoE status monitoring of device class, voltage, current, wattage and temperature. PoE power can be remotely switched on and off; PoE port priority and thermal thresholds remotely set; and possible failure predicted.

The fifth release of Matrox Design Assistant features a more image-centric approach to project configuration, whereby measurements are set up directly on the image itself, rather than through configuration panes.

The Graphite platform is ideal for factory automation and process control environments that may include manufacturing, oil & gas, water/wastewater, power, utility transportation and maritime.

The EC044A is a 44mm brushless motor available in a range of lengths, windings and gear ratios to accommodate a range of user application requirements. The EC042B is a smaller 42mm motor.

The industrial bar coding system combines factory-installed software with a networkable touch screen instrument and industrial thermal bar code printer.

To fulfill users’ different needs, the Axiomtek IMB500 is equipped with multiple I/O connectors including two RS-232/422/485 ports, four RS-232 ports, one PS/2 keyboard & mouse, four USB 3.0 ports, eight USB 2.0 ports, five SATA-600 with RAID 0/1/5/10, one mSATA, two Gigabit LAN ports, and eight channels digital I/O, HDMI, DisplayPort and VGA interfaces.

Designed specifically for harsh environments and available in five ruggedization levels for optimum performance, the PPC11A is ideal for applications such as command and control

The SEL-3360E and the SEL-3360S are industrial computers designed for extreme environments and small spaces. The SEL-3360E operates in environments ranging from –40° to +60°C (–40° to +140°F) with no fans or forced airflow.

The P6121 is a solution designed for POI/POS and human machine interface applications in a variety of heavy-duty industrial environments.

The MGB Series of SCR (silicon controlled rectifier) controls are specifically engineered for OEM applications that require a controlled deceleration, braking or instant reversing, such as indexers, lift pumps, agitators and conveyors.

The Cerabar PMP11 and PMP21 pressure transducers measure pressures from -15 to 6,000 psi at temperatures from -40 to 212 °F with accuracy of 0.5% and 0.3%, respectively.

SuprOS provides network-wide visualization tools for fault, configuration and performance management from a single console. It can manage thousands of communication network devices.

A cantilevered duplex differential slitter rewinder, the 438 offers converters a solution for their slitting needs. This machine is well suited for a wide range of products, including shrink sleeve, film, film laminates, self-adhesive label stock, paper and other flexible materials.

The RA-130 is designed for sampling sucrose concentrations of fruit juices, brix measurement of beverages, concentration control on pharmaceutical and medical liquid samples, and more.

R15 is designed to accelerate all aspects of the user and organization experience, and enable broader adoption of current deployments in the oil & gas, pharmaceutical, chemical, energy, and food and beverage industries.

The LRZ0603 offers a compact 6A zero ohm link in a surface mount ceramic chip format. The LRZ0603 can also be used as a crossover to simplify PCB design by reducing the number of layers needed.

Features available in the software include the ability to print a load cell diagnostics report, and to update existing tare weights. The software revision also adds the Epson TM-U220 to the list of printers usable with the instruments and software.

The FV-3543-2 continuously captures temperatures and thermal images in up to six user-defined zones. The camera is ideal for a range of industrial applications including metals manufacturing, food processing, engine testing, and flare stack monitoring.

These crimp tools feature ergonomically shaped handles with hardness and surface textures for frequent use, a non-slip grip pad for applying pressure against a surface, and ratchet action to ensure crimps are completed according to specification.

Bearings made from RW370 have been tested at the igus laboratory in Cologne, Germany, and they are well suited for door guides and hinges, as well as in rotating joints and adjustment mechanisms for seats and tables.

This service pack improves existing HTML5 and custom widget capabilities, introduces an add-on conversion tool for FactoryTalk applications, and enhances IoTView.

MIL CoPilot will be made available in Q4 2016, via the MIL update service, to all registered users with maintenance subscriptions in good standing, as well as those seeking to evaluate MIL.

The new generation of PS131 transmitters was developed in close coordination with the users. Its modern and userfriendly design stands out. High overload protection and best accuracy. PS131 is a pressure transmitter with a pressure switch to safely and absolutely measure and monitor gauge pressures.

Industrial Video & Control (IVC), is pleased to introduce a radiometric thermal camera for monitoring temperatures in industrial processes and equipment. The FV-3543-2 can aid in the detection of process hot spots and abnormal hot and cold temperature changes and is ideal for a range of industrial applications including metals manufacturing, food processing, engine testing, and flare stack monitoring.

The NEMA 3R transformers are designed for dust or lint-laden atmospheres and are suitable for indoor and outdoor use.

The HG1G display is TFT Color LCD with high resolution of 480 x 272 pixels, 65K colors, and 800 cd/m2 brightness. Viewing can be configured for either portrait or landscape, with a viewing angle of 60 degrees from top, 65 degrees from the bottom, and 70 degrees from left or right.

The EXP-MS-N4X-AT-HV explosion proof motion sensor from Larson Electronics is designed for operators seeking a sensor rated for use in hazardous areas designated Class 1 Division 1 and Class 2 Division 1.

This meter is suited to the Oil & Gas Industry for high pressure chemical injection applications, as well as gas measurement applications such as engine test benches, hydrogen fuel stations and high pressure gas measurement

One of the main benefits in terms of security is the ability to store the private encryption keys for creating OPC UA security profiles no longer in a file, but rather in the smart card embedded in any of CodeMeter’s hardware secure element (CmDongles).

There are 12 standard sizes in the family, ranging from 24 x 42 x 8 inches to 48 x 48 x 12 inches. Manufactured from formed 12 gauge steel, phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.

The MPFM 2600 M can identify and measure non-symmetrical flow in varying flow regimes. The meter includes the signal processing, field electronics and electrode geometry innovations of the third generation MPFM 2600.

UniLogic version 1.18 introduces features and enhancements that extend the application reach of UniStream, Unitronics’ One HMI + PLC controller.

The ball valves were originally developed for use in painting stations and therefore ideal for hygiene applications in the food processing industry.

The XR22404 and XR22417 are designed for applications where power consumption and board space are a concern such as docking stations, point-of-sale terminals, USB port expansion, test instrumentation, factory automation and other industrial applications.

The EtherNet/IP encoders are available in both singleturn (RS-107/108) and multiturn (RM-105/106) variants and come with a diameter of 58 mm, offer a total resolution of up to 32 bits (16 for singleturn, 16 for multiturn), and have been designed specifically for high-speed applications

When combined with Phoenix Contact’s new Thermofox handheld printer, Thermomark Prime can provide a solution for on-site marking of terminal blocks, conductors, cables, and devices.

The AI25 EtherCAT Encoder offers cycle times of 62.5 μs and 22 bit single turn resolution with absolute accuracy of ±35” making the encoder ideal for applications requiring accurate real time speed and position data such as robotics, packaging and high end motion control.

DMP305X Mono silicon pressure transmitter is a high performance pressure transmitter with international leading technology meticulously designed by LEEG instrument, using the world's most advanced monocrystalline silicon pressure sensor technology and patent encapsulation technology. The pressure sensor locates on the top of the metal body and stay away from the medium interface to realizes mechanical isolation and thermal isolation.

The SWaP-optimized VME650-series power supplies were released this week from Aegis Power Systems, Inc. to immediately replace previous models -- giving VME embedded application developers in military and industrial markets more power while maintaining competitive pricing.

Aimed at designers of power supplies, battery monitoring, process control and point of load converters, the LCS resistors will find acceptance for use in market sectors such as industrial, medical, instrumentation and IT.

Targeting high-speed real-time motion control systems, NEXCOM EtherCAT master controller series can accelerate the execution of complex automation schemes, intricate robot control, and sophisticated image processing, allowing deterministic control and machine vision integration of advanced motion control applications.

ADLINK’s SEMA 3.5, which is able to monitor and collect system performance and status information from devices and control system functions, now supports operating systems (OSs) such as Windows 10, and supports the latest x86 and ARM SoC generations.

This serialization suite is designed to provide consistent data, unified reporting and analysis and standardized best practices to enforce collaboration, compliance and data consistency across multi-site implementations.

A 30 hp spindle with 146 ft. lbs. of torque allows this machine to cut challenging metals such as titanium and Inconel as well as stainless steel and aluminum.

The confocalDT 2471 chromatic controllers are designed for high speed distance and thickness measurements of mirrored, transparent, shiny and diffuse surfaces.

Hengstler ACURO-AX73 carries ATEX and IECEx certification for gas and dust explosion proof requirements. It is designed for use in applications such as winches, cranes, drills and other oil and gas industry equipment.

The LKC-1500 comprises a leak detector controller in a DIN-rail mounting enclosure and up to 1500m of leak sensing cable. The controller is able to detect a leak and indicate its position as a distance along the cable from the controller.

Cortet is designed for OEMs and developers to radio enable their appliances, devices and sensors, and also integrate them into an intelligent solution complete with local and IoT based controls, analytics and application software.

Wonderware Online InStudio is a secure, cloud subscription service that lets systems integrators overlay a next-generation infrastructure that is available and scalable.

The PowerXL DG1 is a 250hp general-purpose drive that incorporates an energy control algorithm, onboard industrial communication protocols and built-in harmonic reduction

Prometheus is a configuration tool for defining, programming and documenting all components in an industrial control system, from the Manufacturing Execution System (MES) to the I/O.

The P-616 NanoCube XYZ piezo scanner is a redesign of PI’s successful P-611, 3D positioning stage. Now based on a parallel-kinematic design, with one moving platform for all 3 axes, higher precision and dynamics are available.

This system is well suited for automation applications such as robotics, automated de-stackers, sheet feeders and in-fixture (Poke-A-Yoke) where sensing from only one side is possible.

BEI Kimco developed Brushless DC (BLDC) motors DIT11-15 and DIH40-49 to meet the necessary specifications of the individual centrifuges including operating speeds approaching 25,000 RPM.

Designed specifically for harsh environments, the AWK-4131A-US-T can be used in a temperature range of -40° C to 75° C (-40° F to 167° F). It is optimized for installation in railwaysand marinas, as well as critical industrial applications including IP video surveillance.

The solution provides a scalable warehouse management system with a family of logistic automation modules including a transportation management system (LFS.tms)

The type 400 is equipped with 16 universally usable, differential analog inputs for measuring mV and mA signals or any type of thermocouple.

This touch panel PC is well-suited for use as a human machine interface in smart factory automation, healthcare facilities, and smart building automation applications.

The DP15 was built with flexibility in mind, it provides wet / wet differential measurements which accepts liquids and gasses on both sides of the diaphragm.

RMB 3600 Series sensors are EGMR (enhanced giant magnetic resistance) devices that count turns even when power is removed and retain the turn count and angle information for years without power.

The design is ideal for optical microscopy, scanning probe microscopy, x-ray transmission microscopy, and other applications where two-sided part access is required.

The universal mating face with L-coding has also emerged from this adopted standard. At 63V/16A, the 5-pin L-coding achieves 0.75kW of power, making it ideal for small servo motors, field distribution boxes, field-bus-controlled I/O boxes, power supply devices and valve applications.

The Aventics electronic module evaluates the data locally and uses it to generate information about the status of the system. Via drag & drop on a graphical interface, users define the components of the pneumatics system they want to evaluate.

FactoryTalk Batch View software is well-suited for large industrial facilities that have workstation infrastructure limitations, and require multiple access points across the plant.

This addition to the drylin W toolkit is designed to enhance possibilities in applications including marine, aerospace, and stage technologies.

Designed to detect the difference in the wavelength of the reflected light between a target mark and background, the contrast sensors use RGB light emission with automatic selection, and feature sensitivity adjustment, and light on/dark on outputs.

The MPTC software was initially developed to ensure the operation of compressor stations during voltage disruptions, caused by lightning strikes, winter storms or ice buildup on power lines.

Designed for use buses and train cars, ARD-028-N, with its TFT active matrix LCD screen, is also a digital signage display and media player that delivers advertising, time schedules and location of the vehicle where it has been installed.

More stable than SATA

PAS-X KPI is a KPI/OEE tool dedicated to the pharmaceutical and biopharmaceutical industries. It is capable of integrating data both from the ERP level and the machine level at the shop floor.

The transmitter meets CE, UL, and CUL standards and is suitable for a variety of applications including water/wastewater treatment systems, reverse osmosis, deionization, media filtration, chemical manufacturing/addition, air/fume scrubbers and cooling towers.

Extreme Engineering Solutions (X-ES) Intel® Xeon® D-1500 family processor-based single board computers now support up to 16 Xeon®-class cores in a single, power-efficient, System-on-Chip (SoC) package with native extended temperature support on four, eight, and twelve core-count SKUs.

With 316 stainless steel housing and sealed display, the X80 Transmitter and the S88 Sensors are designed to eliminate the need to inventory multiple instruments.

The STAC6-Q-H stepper drive is ATEX and IECEx certified for Class I, Zone 2 locations, and UL certified for Class 1, Div 2, Group C & D locations.

The DSC6000 MEMS oscillators are solutions for use as clock references in small, battery-powered devices such as wearables and Internet of Things (IoT) devices and are suited for under-hood applications as well.

This module, enabled by Predix, GE’s operating system for the Industrial Internet, works with existing systems to provide true visibility into where work orders are in the manufacturing plant.

Evolved from the designs of the Pentek Cobalt and Onyx architectures, Jade is based on the Xilinx flagship Kintex UltraScale FPGA.

The drive’s size and power range, combined with PLC functionality, makes the VACON 20 a solution for packaging machine applications.

The F192 is a self-contained reader, with the antenna, amplifier, and reading electronics. The F192 puts out the maximum power allowed by the FCC, 4W EIRP, making it ideal for reading tags at distances of more than 15 ft.

The MR50SRW series is has been designed for use in rail and transit applications. They provide the reliability, size, temperature operation and compliance to standards required for use in rail equipment.

The AR59-AV vertical rotation stage is intended for: Micro robotics, metrology, vision systems, positioning of mirrors and lasers, laser machining or scribing, electronic assembly, testing, and photonics.

The LRL-27 sensors are designed for factory automation systems and a variety of heavy duty industrial applications such as solar cell positioners, robotic arm position feedback, and packaging equipment.

The nLight ECLYPSE controller combines digital lighting and HVAC controls onto one platform. The unified platform gives building managers the power to configure, monitor and control building systems through one interface.

The FMR10 measures liquid levels at ranges up to 16 feet with 0.2 inch accuracy, while the FMR20 measures levels up to 66 feet with 0.08 inch accuracy.

Commonly known as a cable connector or fitting, cable glands secure wire or cable to electrical equipment while providing strain relief and protection from dust, dirt and even liquids.

LVS Print Quality Inspection Systems from Microscan feature machine vision tools for evaluating the accuracy of all aspects of a label, including barcode reading to capture and validate encoded data.

Okuma’s MU-4000V provides process intensive machining combined with turning and 5-axis multitasking machining. It features the OSP-P300A control, which includes new apps and widgets, a motion control system and a reduction in start-up time.

The ring concentrates and focuses the plasma directly over the wafer to speed up the etching process, provide uniform plasma coverage, and to isolate the plasma on the wafer itself rather than the area around or below it.

The TiX620 is an infrared camera for the experienced thermographer. Its 640 x 480 resolution provides measurement accuracy and 5.6 inch high-resolution LCD screen affords an in-field viewing experience.

• Fanless solution and power saving design • Full IP65 stainless steel design housing with rich I/O M12 • Intel® Quad Core J1900 2.0Ghz processor • DDRIII L So-DIMM sockets up to 8GB • 1 x LAN , 1 x USB , 2 x RS232, 1 x VGA ( default ) / second LAN ( optional ) • 1 x 2.5” SATA Hard Disk Drive Bay, 1 x mSATA ( Full sized mSTA supported)

Employing Teledyne DALSA's CMOS sensor architecture, the 8k and 16k models deliver color imaging using 4 rows per RGB channel for 12 rows in total. Data throughput is beyond 3 Gbytes per second on a single CX4 cable.

The Axiomtek CEM300 is ideal for IIoT-connected industrial controls, medical imaging, retail equipment, MMK (Multi Media Kiosk), industrial gateway, automation and POS terminals related applications.

The latest additions to the SensoNODE product line include SCOUT Mobile 3.0, a Vacuum sensor, a 4-20mA transmitter and a wireless version of Parker's ServiceJunior pressure gauge

The CPS offerings include applications to address critical challenges for refineries and petrochemical and gas processing plants, including better asset utilization, unplanned downtime, energy efficiency, and gaps in expertise as plants becomes more sophisticated and experienced engineers retire.

The sensor measures the time the light needs to be reflected back from the object. This technology in combination with the EyeVision software, is suited for images in the fields of factory automation

Hilscher’s netIOT family of connectivity products has been “OPC UA enabled” as a strategically vital way of supporting IIoT services and applications, allowing users to move towards digital manufacturing benefits such as predictive maintenance, data analytics, and better resource utilization.

TopView for OPCA&E allows users to monitor, filter, display, log, report, analyze, and send notification (Email, SMS, Voice callout/VOIP, Text-to-speech, …) for events generated from one or more OPC Alarms and Events Servers.

The ISL79985 is a four-channel analog video decoder with MIPI-CSI2 output interface that supports the latest generation of SOCs and application processors used in automotive around view systems.

The Laser Levels feature a self-leveling gimbal that delivers accurate reference points, expediting electrical and HVAC layouts.

The MPV5080LS series is a family of 15W DC/DC converters designed to meet the needs of utility scale photovoltaic (PV) applications. They feature a 200 to 1500 VDC input; which allows the use of longer solar panel strings.

Optimized for use with Banner’s Q45U Wireless Node, the pair provide a solution to monitor levels in mobile or remotely located tanks and totes.

This product offering includes mating ATEX approved receptacles, junction boxes and lockfast guards and is a solution for customers in a variety of applications including gas turbines, skids, compressors, and shipboard applications.

The Anybus Wireless Bolt is a wireless access point designed to be mounted on a machine or cabinet to give it wireless access via WLAN, Bluetooth or Bluetooth Low Energy. This access makes it possible to do configuration via a regular tablet or smartphone.

Designed for new and existing plants in the process industries and utilities, RI Wireless products are intended to facilitate predictive maintenance and are certified as Zone 1 Intrinsically Safe for use in hazardous areas.

With Dual-Simultaneous Programmable Pitch, two of the same conformal coating applicators are installed and operated simultaneously, coating two parts at the same time. Nordson ASYMTEK's motorized system automatically repositions the applicators to match the programmed pitch.

The 360º FMC is suited for automotive and aero-structure applications, including powertrain, and closure panel fabrication to name a few uses for the solution.

SCSIFlash-Tape provides a CompactFlash-based replacement for SCSI-based, electro-mechanical tape drives on legacy computer-based industrial process control systems that are obsolete. SCSIFlash-Tape provides a replacement for the DDS DAT, DLT and QIC tape drives on a variety of host systems.

AXIS is company’s software environment for the development of embedded computing applications such as radar, sonar, signals intelligence and image processing.

This third release of the company’s MES solution introduces a suite of factory-wide material Logistics components to the market and embraces the principles of Industry 4.0 and a Smart Manufacturing environment.

Addresses the need for low voltage power within industrial automation systems, control and measurement systems, and LED lighting.

With 10 to 30 VDC operating voltage and sensing distances ranging from 1mm to 40mm, cylindrical sensors are available in shielded and unshielded models with nickel silver, nickel silver/chrome, chrome plated brass, or stainless steel housings.

Model M7000 permanent magnetic DC motors, from RAE DC Products, are designed to provide the protection needed to operate in water and dust operating environments.

The addition of these frame sizes in the StepSERVO product offering represents a widening of the product range, which included smaller frame sizes NEMA 11, 17, 23 and 24.

This power supply provides cyber security authentication and onboard intelligence for diagnostics and secure Ethernet communications. Users of aPLC, SCADA RTU, PAC or DCS can retrofit to the SPS.500 inside or outside enclosures, in a plant and in harsh environments.

These modules are mainly used in ATS equipment, in PC/PLC combined systems and in cases where Digital I/O is needed to be operated by USB, Ethernet or Internet, without the need to install cards into PC bus, and handle special dedicated connectors.

Built on open global standards, KUKA Connect leverages cloud computing technologies and big data analytics to provide customers maximum visibility into their connected KUKA robots.

The MTC-One is an MTConnect connectivity board for legacy machine tools and IIoT devices and will be unveiled at the International Manufacturing Technology Show (IMTS) in Chicago.

Incorporating dual-sensor ultrasonic technology and processing algorithms, LVTX-10 sensors provide accurate measurement for factory automation, warehouse materials control, pipe and conveyor belt blockage, or tank level applications with non-uniform surfaces.

The entry-level segment of PXI platforms completes ADLINK’s PXI portfolio, which encompasses performance, mainstream and entry-level product classes benefitting a range of user profiles.

The WT1800E power analyzer is a measurement solution for testing product efficiency and the design of inverters, motor drives, lighting systems, uninterruptible power supplies, aircraft power systems, renewable energy generation and other power conversion devices.

Designed specifically to operate valves with a rotating angle from 90° to 180°, the actuators can automate a range of ball and butterfly valves in applications such as chemical processing, water treatment and refrigeration.

This material flow system solution is primarily geared towards logistics providers looking to automate processes in distribution centres and cross-docking hubs for improved throughput and service scalability.

Powered by 6th Gen Intel Core Desktop Processor with longevity support, the chassis design is ideally suited for smart control systems, machine vision inspection, digital signage, surveillance and machine maker.

MERLIN Tempus is an open Manufacturing Execution System (MES) platform that offers tools and a configurable dashboard that provides a complete view of the shop floor.

The initial release includes both rear- and side-actuated 1” travel stages and all components needed to have left- or right-handed X, XY, XZ, YZ, and XYZ configurations.

The Pressure Scout is an alternative to conduit-wired or other pressure monitoring solutions. Applications for the Pressure Scout include well tubing and casing pressure monitoring, tank level monitoring and compressor station status monitoring.

The eBOX560-500-FL is suitable for Industrial Internet of Things (IIoT) solutions, digital signage, retail equipment, smart factory automation, thin clients, industrial controller systems and more.

The eddyNCDT 3005 consists of sensor, cable and external miniature controller. These eddy current sensors can optionally be custom engineered for high temperature applications up to 180°C.

The modular solution comes equipped with standardized function blocks for operation (start-up, operation, manual functions), control (speed, steam distribution, anti-surge) and protection (bearing, temperature, pressure).

The EPLAN Platform version 2.6 includes additional features for terminal design and project data management, the representation of piping in fluid power engineering, and optimized IT integration.

Designed for automotive and factory automation applications, the ASB200-909 comes with low power consumption and supports an optional 60W power adaptor, VESA mount bracket, as well as a 12V~24V DC wide-range power input terminal block on the rear of the system.

The HI 6000 series comes with Hardy’s Setup WIZARD that guides users step-by-step through instrument set up and calibration. Each instrument is UL and CE approved and available with power options of either DC or optionally AC.

AAEON’s BOXER-6403M and BOXER-6404M feature dimensions of 158 x 95 x 41.5mm and 166 x 106.6 x 52mm respectively, ideally suited for factories and factory equipment with limited space

Measurement range of the Vert-X 51 Series is 0 to 360° and physical measurements of the housing are 30 mm x 50 mm. These encoders are ideal for harsh environments with ingress protection to IP 67 and stainless steel housing and shaft are available.

These brushless linear motors are designed for a variety of medical, manufacturing, scanning, inspection, laser cutting, and precision assembly applications.

Typical applications for the Model 24A/34A Series include engine test stands, turbine rockets, diesel engine internal combustion, emissions testing, production test stands, compressors, pumps, stamping presses, rolling mills, die casting, hydraulics, and off-road vehicles.

The V920EX boasts a work envelope with a maximum turning diameter of Ø 36.22 and 33.86” of swing over the saddle enabling it to accommodate large, odd–shaped workpieces.

Bringing together existing technologies with new product releases into one integrated portfolio, Symphonite software and services offer an end-to-end solution for oil and gas, refining, and mining, metals and minerals industries.

The EV Evolution series standard features include full UL certification on all options, a compact foot print which makes this unit fit for smaller cabinets. Industries and applications include, automation control panels, electrical control panels, distributed antenna systems, and more.

AutomationDirect’s line of RUKO countersink bits now include bits to accommodate UNC, or imperial (inch), fasteners. The round shank, 82-degree taper countersinks are CBN ground from steel blanks which creates a sharper and more durable cutting edge with precise tolerances.

The Mocana Security of Things Platform secures manifold aspects of connected devices through a collection of services such as pre-boot verification, certificate management, cryptographic engines, secured data transport and secured firmware updates. The platform with integrated support for the OPTIGA TPM family will be available in Q4 2016.

Standard features include EN 55022 B emissions, active power factor correction to EN 61000-3-2, I/O isolation of 3 kVAC, and a standby 5V output.

Smart Attend is capable of collecting and organizing data for pareto analysis, individual manufacturing goal parameters with active lighting response and remote global access to historical production data

The single-output TE240 Series models are Level VI+ compliant external power supplies designed for integration with test and measurement equipment and industrial applications that require enhanced levels of performance at higher power levels.

Applications for the SDG1000X series of generators include research and education, IC and circuit testing, environmental and medical signal simulation, etc.

The ‘ZLW toolkit’ is designed so customers can customize their own solutions, including rail widths, system length, etc., for small installation spaces.

PXI Thermocouple Simulator Modules (series 41-760) are designed to simulate the operation of a thermocouple. They are available in a choice of 8, 16, 24 or 32 channels.

The devices feature a metal enclosure with a high degree of protection (IP65/67) and an operating temperature range from -40 °C to +70 °C. This provides flexibility to be deployed outside the control cabinet, both indoors and outside.

The Tank Gauging Platform is a monitoring and inventory control system designed for tank farms and terminals in the chemical, oil & gas, refining and similar industries where large amounts of liquid or solid materials are acquired, stored and transferred.

Olympus’ Vanta handheld XRF analyzers benefit a range of applications from alloy recycling, PMI and geochemistry, through to precious metal identification, QA/QC and regulatory and safety screening.

The CSF-2UP gearbox is designed for use in high precision positioning tasks in applications with limited space, such as jointed arm robots, measuring instruments and various uses in the growing medical technology market.

Brainboxes’ SW-608 10/100 MB/s Ethernet switch, uses a 2K packet size to enhance bulk data transfer and optimize system performance, has galvanically isolated ports to provide safe operation in tough environments and extreme temperatures between -40ºC to +75ºC (-40ºF to +167ºF)

This Single Channel Type K Thermocouple Amplifier Module converts the low output voltage signal from a Type K thermocouple probe to a single independent linearized 0 to 5 VDC output voltage.

Offered in either a standard 8-pin hermetically sealed ceramic DIP (MHT) or Gull-Wing SMT (GHT) package, the AM-606HT is a dual operational amplifier specified for operation up to +200°C.

Featuring digital compensation to provide pressure measurements over a temperature range from -20° to +125 °C, the TPM Series is ideal for applications in hydraulic and pneumatic systems, and for fuel and lubricant pressure sensing, leak detection, filter testing and tank level sensing.

The latest version of UniSim Design Suite process modelling software is designed to help industrial manufacturers increase their engineering effectiveness and optimize their process designs.

Features include a linear encoder option on PRO-SLE ball-screw stages, absolute encoder options on both the linear motor and ball-screw stages, and direct mounting to English and metric optical tables.

With these mounting frames, this series of rugged connectors, widely used in the rail and mass transit industries in particular, can host up to eight Han-Modular single modules instead of the usual six.

FLOPPYFlash is designed to provide a solid state replacement for obsolete, electro-mechanical floppy disk drives in legacy industrial process control systems and equipment as a direct, drop-in replacement.

Miki Pulley CSZ Clutches feature an integrated bearing design. CSZ Clutches operate well in temperatures from +14°F to +104° (-10°C to +40°C). Available in bores ranging from 10mm to 15mm, with brake torques ranging from 1.77 ft. lbs. to 7.376 ft. lbs. (2.4 Nm – 10 Nm).

The Glide-Line 360 is a combination of powered timing belt based conveyors working together with a family of devices. Used as a centralized hub, the Glide-Line 360 can help solve complex pallet, work-piece and panel handling distribution challenges.

Okuma’s GENOS L3000-M one-saddle lathe is designed for cutting a wide range of exotic materials. At IMTS 2016 the GENOS L3000-M will be cutting a steel pinion drive for the automotive industry with Iscar tooling, a member of Partner’s in THINC.

Net I/O is an Ethernet-based digital I/O and control interface add-on for users of Total Vu monitoring and control software. The add-on provides isolated switch inputs, Form C relay outputs, encoder input, and precision timer-controlled Form A relay outputs.

The models ST51A, ST75A and ST75AV Thermal Mass Flow Meters provide users with a solution to measuring air or gases in demanding industrial process and plant applications.

The product is designed to provide connections with its support of cellular communication features such as multi-ports to LTE routing, LTE/WIFI auto-offload, WAN to LTE Redundant, Dual SIM standby, SNMP and Mobile Manager Server for remote monitoring.

Racer5-0.63 and Racer5-0.80 are both controlled by the R1C 19" rack-mounted controller, which can be integrated into a single cabinet to control an entire line.

The ProLine P50000 series from Knick was specially developed for voltage and current measurement in main and auxiliary power circuits of locomotives and multiple units.

Omron’s Mode E3Z-T61 photoelectric sensor has a top-level sensing distance, and allows sensing distance to be as long as 30 m.

Resistive type touch screen monitor displays 1366 x 768 resolution, supports VGA and DVI video input, and is panel mount or VESA mount ready.

Designed for process control and quality assurance, the cameras are available with 10 field-of-view options, from 8 degrees up to 90 degrees, to give users the option to pinpoint a single target or monitor a large area.

Each FlexorSet is a multichannel data converter sub-system with programmable analog I/O signal interface suitable for connection to HF or IF ports of a communications or radar system, and supporting signal bandwidths up to 100 MHz.

These stainless steel fork sensors are available in 50mm and 80mm widths and are designed for the food and beverage, packaging, metalworking and pharmaceutical industries.

The OptiFZP is designed to offer productivity with reliability and accuracy with an interface on a 7” color touch-screen allows users to start a test with a touch of a button and view a real-time graphic display of the test.

This software component from C3D Labs works with polygonal 3D models. Scenes are split into segments and then represented by graphics. Each segment can have its own set of characteristics: absolute and relative matrices, data, and an array of geometry representations.

This design from MMP utilizes an ‘All-Steel” drive pinion, thereby increasing the force capacity, while maintaining the 5:1 Reduction Ratio which allows the unit to maintain a 2” per second stroke speed.

The M12 cordsets are ideally suited for the food and beverage, pharmaceutical and chemical industries where a washable connector is required.

SCADAware developed its StatusWatch product line to monitor asset utilization and analyze plant efficiency. StatusWatch Live’s primary focus is on live data relevant to the current situation on a shop floor.

The C/B 3500 Series provides a solution for the most extreme environments including military, transportation, alternative energy, and process control systems.