Industry Products

The DCH403-10 combines a custom regen-capable switching power supply with a low voltage drive to allow control over low voltage motors without the negative effects of current spikes or the large BUS voltage associated with typical 115/230 VAC controls.

This introduction to Mantracourt’s range of signal converters can be used with resistance based sensors to indicate position, rotation, angle and depth and is particularly suited to applications such as displacement measurement and angular measurement that require accuracy.

Designed to interface with Zaber’s X-MCB1 and X-MCB2 controllers, this device is available in two stackable sizes with 40 and 60 mm centre of rotation options

Up to four 12 AWG conductors can be connected in one feed-through terminal block. The terminal blocks feature Phoenix Contact’s push-in connection technology, for wiring of the pre-assembled conductors.

Providing a measuring rate of 70kHz, the confocalDT 2471 HS high speed controller is currently the worldwide fastest confocal chromatic controller. The controller is used for fast distance and thickness measurements of highly reflecting surfaces.

The new thicknessSENSOR from Micro-Epsilon opens up even more diverse application possibilities in terms of non-contact thickness measurement. The sensor works extremely precisely combined with ease of use and a compact design, measuring without contact and therefore wear-free.

This 18.5" Intel Celeron-based WXGA touch panel PC is suitable for self-services, digital signage, light factory automation, and more.

Vecow ECS-9000 Series is a solution for Machine Vision, Intelligent Automation, Smart Manufacturing, Embedded Cloud, Intelligent Surveillance, Vehicle Computing, Mobile Robot Control, and any Industry 4.0 performance-driven real-time embedded computing applications.

ASTM A500 Electrical Resistance Welding Pipe Supplier: Round Carbon Steel Pipes, 8 Inch (DN200), Beveled Ends, Black Vanish Coating, Grade D.

A high volume, double-ended, double acting high pressure pump, the AHL118 is designed for use in oil and gas, chemical, industrial and research applications

This combined hardware and software system is designed to help companies leverage the increased connection of devices brought on by the Industrial Internet of Things.

The controller manages industrial processes with more chaotic upstream fluctuations, such as control of industrial combustion gases, or mass flow into food and packaging processes.

Freedom 4.0 focuses on manufacturing efficiency that integrates to provide full transparency into manufacturing processes. These include asset utilization, performance, quality and OEE, as well as machine health and process health.

With embedded support for CIP, this industrial Ethernet switch portfolio provides communication for industrial markets that include manufacturing, automotive, electronics and food and beverage.

Developed for industrial imaging applications, including intelligent traffic systems, printed circuit board inspection and metrology, these latest Genie Nano models feature a global shutter and a 3.45 µm pixel.

These HMIs are suitable for use in hazardous areas applications (Zone 1, 21 and 2, 22) such as managing and monitoring of drilling, purging, and directional drilling operations.

The Fluke 368 FC and 369 FC leakage current clamps are designed to help industrial electricians and maintenance technicians identify, document, record, and compare leakage current readings over time to help prevent problems before they happen.

This graphics-based web tool allows users to create customized cable assemblies using detailed design characteristics including a selection of connector types, wire type, pin definitions, pin and cable labeling, cable bundling, length selection, sleeving comments and more.

Applications that can benefit from Rosemount X-well Technology include pipelines, high velocity flows, heavy particulate fluids, clean-in-place processes, high viscosity fluids and harsh processes in the oil & gas, chemical, refining, food and beverage, metals and mining and pulp and paper industries.

The TGP3100 series can generate precision pulses from 1 mHz up to 50 MHz with pulse width and delay resolutions of 100 psec. Single and dual channel models are available, both featuring graphic LCDs for simultaneous text and waveform information.

The Relio R1 solid-state system is designed for heavy equipment, automation and other applications that demand powerful processing and a compact footprint.

NCA-1210 is a combination of form factor and computing processor, designed to be a network gateway for small and medium enterprises, retail, branch office and other edge security applications.

The polycarbonate enclosures feature impact resistance of up to 900 inch-pounds, UV light resistance, and have an operating temperature range from minus 40 degrees F to 265 degrees F.

SMARTimer Type 84.02 Digital Timer "Two in One" with NFC technology: two (2) totally independent programmable channels in one product.

The LiquiSonic OCR analyzer, by SensoTech, is specifically designed for refrigerant applications, and enables the oil circulation ratio in the refrigerant to be monitored online and directly in the process using sonic velocity measurement.

The most common applications for this family of miniature triaxial ICP accelerometers are modal and structural analysis, automotive NVH, and package testing.

The 17DCT motor is designed for for demanding applications such as medical and industrial pumps, drug delivery systems, miniature industrial power tools, tattoo machines, mesotherapy guns, dental tools, watch winders and more.

KEPServerEX version 5.21 introduces the ThingWorx native client interface, a fully-integrated solution built to provide rapid connection to industrial things—including PLCs, RTUs, PACs, DAQs, controllers, and more.

All three of Logic Supply's ARM-based offerings are powered by an ARM Cortex-A9 i.MX6 DualLite 1.0 GHz processor and feature support for Android, Linux Ubuntu and Yocto operating systems

Target uses include Industrial Internet of Things (IIoT) applications such as smart cities, smart agriculture, connected homes and vehicles, digital signage systems and other IoT applications.

FUDA2-S1921’s application-oriented design and rigid laboratory testing provide customers with an ideal HMI solution for factory automation, CNC machine, and the food and beverage industry.

The monitoring app enables monitoring of Siemens LOGO logic controllers, S7 control systems, and Modbus TCP and RTU devices that are connected to the routers.

The devices are ideal for the isolation of electrical circuits within high-radiation deep spaceflight applications, including satellites, launch vehicles, space craft, and planetary rovers.

The Ex 97 switching devices with plastic housings, are tested and certified according to ATEX and IECEx for use in Gas Ex zones 1 and 2, as well as dust Ex zones 21 and 22.

Designed for test and measurement and industrial devices that require low noise and rugged performance, the 120-watt TE desktop external power supplies comply with the U.S. Department of Energy’s (DOE) Level VI efficiency requirements.

These compact safety modules feature integrated functionality to safely switch off power to all modules that are within a safety segment, and are designed to eliminate the need for a safety controller.

Switch Path Manager signal routing software speeds up switch system development by automatically connecting system endpoints. The software supports Pickering’s PXI, LXI, PCI and GPIB switching systems and the interconnection between them.

Robotic welding facilities can now meet air quality regulations without losing too much floor space. RoboVent, the leading manufacturer of clean air technologies, created RoboVent Spire® to address the needs of robotic welding operations where space is at a premium. RoboVent Spire® has the smallest footprint in the industry.

ASI PCB fuse holders ensure a reliable electrical and mechanical connection, stable mount, safer installation and removal of 5x20mm glass fuses, and are more cost effective to use than traditional fuse clips.

AES-128 Encryption supports a more reliable and secure wireless network infrastructure within all its communication systems. The encryption protects against tampering as any modified data is invalidated and ignored.

Without proper grounding between the shaft and the motor housing, the bearings often become the path to ground.This technology is designed to extend bearing life and reduce operating costs for motors driven by Variable Frequency Drives (VFDs).

The CM44P accepts inputs from up to two process photometers and four analytical sensors simultaneously and also performs diagnostics on all connected sensors and analyzers, and transmits error messages.

The devices feature 4.5A switches, up to 96%, and a compact footprint ideal for providing system power or powering the peripherals in battery-operated devices.

This gear motor drive provides a solution to most material handling-related challenges, including conveyors, warehousing, logistics, baggage and cargo handling, post and parcel shipping, plus numerous industrial applications in the automotive, appliance and test stand industries.

The NSF rated ISM 5.0 is an alternative to full bore magnetic flow meters. It works on pipe diameters from 3 to 72" (80 to 1800 mm).

Microchip and Amazon Web Services collaborated to develop this integrated solution to help IoT devices comply with AWS’s mutual authentication IoT security model.

The Siglent SDM3045X features a combination of basic measurement functions, with multiple math and display choices, and special features including histogram, trend chart, bar chart, statistics, hold measurement, dBm, etc.

The PS-series fork sensors feature glass optics, selectable light on/dark on operation, adjustable sensitivity potentiometers, high switching frequencies, and are fitted with M8 connectors with 360-degree viewable LED indicators.

TAG-TITE RFID is designed for the identification and asset management of safety instrumented system (SIS) devices, and is built for harsh environments in the chemical, oil & gas, petrochem, pharmaceutical and other process industries.

The devices allow operation on active sensor technology with a supply voltage of 6 V to 30 V DC. They are powered via the sensor’s current loop, so they do not require an additional power supply.

The K-SS has a rugged 316 stainless steel body and IP69K enclosure protection, designed to cope with the rigorous applications of the food processing, pharmaceutical, packaging and petrochemical industries.

The machine, a 5-Axis VMC with a trunnion table and turning capability, manufactures high-value titanium aero engine components.

The MF102-H Hydraulic Training System is designed to help students understand the principles and theories of hydraulics.

RC-WebView 3.4 from Reliable Controls is an enterprise server solution that meets the BACnetOperator Workstation profile. This latest version of RC-WebView introduces a number of new features to improve the product and expand its capabilities.

The GOT812L(H)-880 panel PC is designed for process automation in the food or chemical industry. The IP66/IP69K-rated touch panel PC is designed to support Intel Core processor i5-4300U (1.9 GHz) with fanless operation.

The LB3000 EX-II is available with milling function and Y-axis capabilities. It enables a variety of configurations and allows the machine to be used for many industries, including oil and gas.

The LEC-7233 is an ideal multi-service communication gateway appliance for manufacturing execution systems (MES), machine vision and factory automation.

Festo's DRVS semi-rotary drive and matched SRBS position sensor are designed to provide a long-lasting product and come in 90, 180, and 270 degree swivel angles

The THM MultiMark printer marking system is ideal for users who have both small and medium custom print volumes and want a means of producing custom markers for terminals, wire and cable, and equipment.

These project cameras will be available as housed or single-board version with different lens holders. Engineering samples for design-ins will be available in September as serial production is determined for the end of 2016.

The supply provides 360W of regulated power in a 4” x 6” footprint and complies with international medical safety regulations per IEC/EN/UL 60601-1 3rd edition, 2x MOPP primary to secondary level and BF rated output requirements.

SCREENSCAN-RD is a solution that offers an objective and quantifiable assessment of the aesthetic characteristics of automotive glass.

NEXCOM's PICMG 1.3 single board computer PEAK 888VL2 boosts performance and speed for industrial automation systems to give legacy systems a new life.

Get all your data acquisition (DAQ) requirements fulfilled with the Zen Datalogger. It logs data onto a 1GB micro SD card, so you can physically take your data with you or route it to other hardware.

If you need to collate multiple signal input types and route them to your PLC or SCADA system, choose the Zen RTU. This exceptionally flexible and powerful monitoring and control station is the last word in RTU technology

The SC UPS family is a 700VA to 3kVA rackmount SC which provides comprehensive backup power protection for high-performance systems including IT and IIoT equipment, telecommunications, servers and industrial programmable logic controllers (PLCs).

Due to its ruggedized metal housing, the OCTOPUS 8TX-EEC is ideal for applications in the transportation industry, as well as general manufacturing, machine building and automotive applications.

With eight configurable digital inputs / outputs, a relay, four freely controllable LEDs and a real time clock, μMIC.200 can be used for a variety of applications.

Dinkle 0225 series terminal block is suitable for industrial automation applications such as inverters, servers, controllers and drivers.

The device builds on the company’s IO-Link portfolio with event and process timestamping capabilities for on-machine applications. The IO-Link master stores up to 40 timestamps of sensor events on each channel.

The 480W power supply features removable finger-safe terminal blocks, output voltage status LED indicator, conformal coated circuit boards, and approval for Class 1, Division 2 hazardous locations.

The USB/LXI modular chassis is designed for portable, benchtop and space restrictive applications. The LXI Simulation Tool is designed to provide users with a platform for application development

The Blackfly S is designed for a variety of applications such as display or PCB inspection, microscopy, robotics, 3D scanning and intelligent traffic systems.

The drives are equipped with user-adjustable trim pots to set Max/Min Speeds, Slip Comp, Boost, Torque Limit, Accel and Decel/Injection Braking parameters.

Historian collects, stores and normalizes time series sensor data from industrial equipment and processes. This information empowers analysis and troubleshooting needed to analyze asset performance so industrial businesses can improve operations.

The RI360-DSU angle sensors provide customers with a rotary valve sensing solution ideally suited for harsh environments

the 84 Series SMARTimer offering NFC technology is a multifunction Digital Timer with two (2) 10 A contacts and two (2) independent channels to offer flexibility

With design flexibility to meet custom assembly requirements, PI piezo actuators are being utilized in research and industry microstructuring and scanning applications, precision positioning of optical elements, and micromachining.

The SoftPLC supports Ethernet-based fieldbus systems such as EtherCAT, EtherNet/IP, and PROFINET. Therefore, the board does not need any additional hardware in order for it to act as a master, a scanner, or a controller in the network.

The TE40 has been specifically designed for the power rigors of test & measurement and industrial devices that require low noise and robust performance.

The DAC-1412 series offers 14-bit resolution and ais housed in a 28-pin plastic TSSOP package. It is offered in two Commercial off the Shelf (COTS) grades, DAC-1412SE (-40 to +105°C) and DAC-1412SM (-55 to +125°C).

The use of mold flow analysis helps engineers run critical calculations to expedite the design of custom part and mold features, such as gate location, parting line location, design geometry, material flow, fiber alignment, vent locations, weld-line analysis, and cooling-line locations.

The C600's 3U design uses industrial-grade components and provides a solution for wayside signal and communication installations globally. These units are ideal for redundant systems with two units per 19” sub-rack.

The robot-guided sensor inspects the paint surface of vehicles even in motion. Users can measure topographical defects in three dimensions and gain comprehensive information that enables them to systematically optimize production.

The devices are stand-alone units requiring only a standard 24 V or 48 V power supply. An optional indexed knob provides convenient manual control for versatile operation even without a computer.

The X-FWR-E filter wheels are stand-alone units requiring only a standard 48 V power supply. The built-in motor encoder allows closed-loop operation and slip/stall recovery features. An indexed knob provides convenient manual control for versatile operation even without a computer.

The midstream natural gas portfolio is designed to provide reliable and accurate volume and energy value measurement across a wide range of applications, while helping to cut operating costs by up to 70 percent.

The CBM is a programmable circuit breaker that can manage multiple circuits in a single device. It is available in four- and eight-channel versions, so it can manage up to eight circuits.

The TMD3700 footprint, at 4.00 x 1.75mm and with height of 1.00mm, is ideal for next-generation mobile phones with extremely tight layout and mechanical design constraints.

The updated features of Version 5.0 strengthens the Statseeker platform by providing improved functionality and helping to streamline workflow.

The LDC0851 provides designers an for proximity, position and motion sensing applications such as rotational encoders, buttons and door open/close detection.

Waterfall Security’s Unidirectional Security Gateway product family is designed as an alternative to firewalls, providing protection for the safety and reliability of industrial systems that firewalls cannot.

The MA-12500HW is designed to provide a balance of speed and cutting power for machining difficult-to-machine materials, cast iron and aluminum alloys

ADLINK’s Express-BD7 targets customers building space-constrained systems in industrial automation and data communication, such as virtualization, edge computing or other numerical applications, that require high density CPU cores balanced by reasonable power consumption.

In coordination with Cisco and Intel, NI hopes to empower customers to build distributed systems that perform synchronized I/O, code execution and deterministic communication for distributed control and measurement loops, all using standard Ethernet.

The Intel Core-based CEM500 is targeted at telecommunication, medical imaging, digital signage, gaming machines, military, human machine interface, industrial automation controllers and IIoT applications.

The IRB 1660ID’s Integrated DressPack design makes it easier to program and simulate predictable cable movements than standard robots with externally routed cables.

The addition of a user-searchable lighting inspection data archive means that utilities and wind farm operators now have a tool for short- and long-term lightning damage analysis.

The latest version of LabVIEW introduces channel wires to simplify complex communication between parallel sections of code. Available on both desktop and real-time versions of LabVIEW, the channel wire method helps improve code readability and reduces development time.

The AST-1000 can generate all common infotainment RF signals, including AM/FM, DAB, GPS, HD Radio, and Sirius/XM. This solution is ideal for validating automotive infotainment systems.

The Eaton SC9000 general purpose (GP) drives are designed for a wide range of original equipment manufacturer (OEM), water and wastewater, utility, industrial and heating, ventilation and air conditioning (HVAC) applications.

The generatorNETBOX series of arbitrary waveform generators (AWGs), based on the LXI instrumentation standard, are designed for engineers and scientists who need to generate electronic signals in automated test and remote applications.

The SVTS B Series (SRC 032M) series IP65 sealed slip ring assembly isdesigned to meet the needs of latest technology flowpack packaging machines. Applications include machine tools, rotary tables, carousels, wind turbines and cable winches.

Applications of the E-873.3QTU include precision alignment and automation, semiconductor technology, photonics, bio-nano-technology, metrology, microscopy, micro-manipulation.

Initially designed to meet the exacting requirements of an anesthesia machine, the LAH15-19-000A VCA will serve well for many other applications where low friction and high force accuracy are needed.

The LR-19 is designed for factory automation and a variety of industrial or commercial applications such as motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brake position, and packaging equipment.

Customer applications benefitting from the Type 7 pinout include space-constrained systems in industrial automation and data communication, such as virtualization and edge computing, that require high density CPU cores balanced by reasonable power consumption.

This solution is engineered to provide sorting performance to many applications: sort-to-pallet build, shipping doors, shipping containers or workstations.

The BYTEM-123-PC and the BYTEM-103-PC are both based on the quad-core Intel Atom processor E3845 and EN50155, certified for railway applications.

With 10 models available, the magnetic sensors feature stainless steel shielded housings, are offered as NPN or PNP models with normally-open or normally-closed outputs

Antaira’s LNX-2012GN-SFP industrial gigabit managed Ethernet switch series has been designed to fulfill applications in harsh or outdoor environments. The SFP fiber connectivity of this unit is ideal for centralized connection of multiple devices.

The latest release of PlantESP includes functional enhancements that simplify the identification of control loop performance issues and architectural improvements that speed PlantESP’s processing.

IridiumLine gears are available in sizes 14 to 58 with gear reductions between 30:1 and 460:1. Lengths range from 19-61mm and external diameters between 50-195mm.

With a rugged design for demanding outdoor environments and operating temperatures of -40ºC to 60ºC, the Sentinel Float Stick System is designed for Class 1 Division 1 intrinsically safe operation and to be a viable wireless tank level monitoring solution in oil fields.

DFI’s Thin Mini-ITX boards are beneficial in space-limited environment due to the I/O ports and slim-size.

DFI’s fanless and compact embedded box PCs are designed with industrial-strength components and soldered-down CPU and memory in order to bring enhanced reliability and stability in harsh operating environment.

Designed for COTS applications, the AcroPacks are ROHS compliant and ideal for scientific development labs, military and aerospace applications, the defense industry, and automation applications.

This machine features a compact design and a cast iron base, in addition to optimized CNC control, motors and drive systems that are specifically designed to work together for machine performance.

The Prime Vision solution detects any labeled hazardous material within the sorting environment and initiates the safe shutdown of systems to enable an operator to remove the item or take appropriate action.

The modular and scalable design of the CT5400 can incorporate up to six high-resolution laser modules and can detect, measure, and monitor up to 12 critical components simultaneously.

The sensor is compact (similar in size to a standard sensor case) and can be mounted on a back panel or DIN rail. It is compatible with most automation and control systems.

The most significant addition in this version is new firmware for Opto 22 programmable automation controllers (PACs) that includes an HTTP/S server with a RESTful API.

Based on the modern principle of sonic velocity measurement, the LiquiSonic V10 provides an inline analytical solution used to determine the concentration of process liquids in industry and research.

Festo's CTEU-EP universal interface module from Festo is designed forEtherNet/IP connectivity for a range of Festo valve terminals. The CTEU-EP is ODVA conformant and a Rockwell Encompass referenced product.

The QF-46 is designed with next-generation optical instruments and laser machines in mind. It is suitable for any demanding optical application requiring high precision and throughput with long travels.

The LEC-7230-CT1, with its 0°C~55°C operating temperature range, is positioned as a solution for a range of deployment scenarios such as production line automation, surveillance NVR, home gateway, digital signage, and retail POS.

Powered by Intel® Atom™ processor E3826, NECOM's NISE 50 offers data acquisition, edge computing, and cloud integration with a thin client and provides an easy way to scale IoT applications with optional NEXCOM IoT Studio, helping enterprises implement continuous improvement across organizations.

CENITs’ universal software platform is designed to enable systems integrators and manufacturers to emulate a real production environment.

Designed for any industry that requires measurement of concentration or density, the Density/Specific Gravity Meter takes measurement in 20 seconds and requires a minimum sample of 1.0mL

The Model 71791 L-Band RF tuner is designed for connection directly to SATCOM or communications system L-band signals.

The EXC Compact Regulator is suited for applications including test benches, analytical instrumentation, and OEM equipment.

The ST6 sensor series includes a wide range of versions with different line lengths and connections. Aventics also offers variants with ATEX certification and covers application temperatures from -40°C to 120°C with its cold and heat-resistant versions.

Matrix-700 is powered by a ATMEL 536MHz ATSAMA5D35 Cortex-A5 CPU which is equipped with 512MB SDRAM, 8MB Flash and suitable for unmanned application environments.

The BL652 is a fully-integrated, stand-alone BLE and NFC solution ideal for a number of applications including EIoT devices in industrial or commercial settings, medical peripherals, as well as sensors and beacons.

The TSEB is ideal for a wide range of OEM applications, including: servo motors/systems, medical apparatus, robotics and imaging equipment, material handling, semiconductors, energy-related (wind, petroleum, etc.) actuators, and security-related actuators

the MLC 5 Series medical panel computer is equipped with a 5th generation Intel Core i7 processor to enable management and integration of information from PACS (Picture Archiving and Communication System), EHR (Electronic Health Records) and other clinical data systems.

Leveraging a Logix-based controller platform from Rockwell Automation, the SequenceManager solution allows operators to configure, view and obtain critical information about batch sequences stored in the controller

The service features EasyBridge technology, enabling users’ PCs to connect to the remote network, and letting software tools such as RSLinx, Studio 5000, Unity, and TIA Portal work without routing.

Argonaut lets users install only the manufacturing apps they need, only where they need them and control them from a central location.

The system’s touch-safe design, with automatic current transformer (CT) short-circuit function, ensures a high degree of safety for test and measurement. It also enables clear detection of all switching states.

The TP1002 Trolley Packer is designed to provide fully automated trolley loading, for the dairy industry, at faster operating speeds than manual systems.

The IG120-20 is designed to provide the asynchronous output voltage levels required to properly bias the gate drive of SiC semiconductors.

The VPT351 valve-position sensor features a measurement range of 0-10mm (±5mm) to 0-25mm (±12.5mm) in 1mm increments and is ideal for off-highway, specialty-vehicle applications including mobile cranes and construction vehicles.

Hoffer's STAR Series liquid turbine flowmeters are available to measure liquid flow applications in 11 sizes and cover a flow range of .35 to 650 GPM. Some industrial flow applications include fuel metering, well water, gasoline, etc.

The communicators use the TAB-EX series of Android Tablets from ecom instruments. The kits include the tablet, HART modem, and the DevComDroid DD based Smart Communicator App for Android.

Through this RESTful API, developers gain secure programmatic access to new or legacy physical assets through control variables and input/output (I/O) data using any programming language that supports JavaScript Object Notation (JSON).

Turck has developed the safety module for an extended temperature range from -40 to +70 °C. The IP65/IP67/ IP69K protection types allow use in demanding environments.

This fourth generation HMI/SCADA technology is designed to allow operators to spend less time navigating, find critical data faster, improve alarm resolution success, identify relevant screens for an alarm, increase usability, and achieve a faster build/deployment.

The latest version of the process design kit provides product developers with a plug-and-play tool set with improved analog features and device performance as well as simulation models.

The Zirconia Screw Fit Housing option provides engineers with the basis for a solution, where only the sensor head itself is exposed to the sample gas environment.

Development efforts for the 3.0 release focused on providing features and functionality based on performance, quality and usability feedback, collected with the previous version

The Liquatite conduit, by Electri-flex, is designed for a wide range of uses in the electrical industry, including motors, lighting, electric signs, elevators, pools/fountains, enclosure connections, and more.

The Manta G-319 powered by the 3.1 megapixel Sony IMX265 sensor, and the Manta G-507 utilizing the 5.0 megapixel Sony IMX264 sensor will provide options for high-quality imaging.

PanoTek controllers are offered in a range of scalable configurations and are well suited for a variety of markets, including digital signage, boardroom, operations/process control, and security & surveillance.

The MXE-5500 Series sustains performance at -20°C to 70°C*, shock up to 100G, and vibration up to 5 Grms, making it a solution for ITS, surveillance, and industrial and logistic automation

The measuring system is based on the photogrammetry method and is designed to make industrial measuring robots easier and more flexible to use

This product development combines PA&E's hermetic RF connector technology with MIL-DTL 38999/23 Series III shell interfaces.

The range is designed to provide users with a number of design improvements on conventional PushIn terminals and satisfy demanding requirements regarding ease of use and mechanical stability.

The ball-pretensioned predefined positional system is deisgned for stepped locking. The drylin preload prism slide is suitable for manual adjustments wherever displacement forces and a "full" high quality run while moving are desired.

The CAT III 600V / CAT IV 300V rated Fluke 902 FC performs the essential measurements of HVAC systems — microamps for testing pilot light sensors, resistance up to 60 kilohms, AC current, AC/DC voltage, capacitance and contact temperature. The awards were chosen by an independent panel of HVAC contractors.

The new line incorporates a variety of flame detection technologies that will provide coverage for a wide range of process industries, including upstream oil and gas installations, chemical plants, and refineries.

The OnePick allows products to be picked and replenished in an automated way in combination with delivery and takeaway conveyor, via the introduction of a secure delivery interface window.

Using adaptive drive angle adjustment, the DRV10970 is designed to achieve optimized efficiency regardless of the motor parameters and load conditions.

The product’s CANopen interface supports CiA DS301: CANopen Application Layer/Communication Profile and DSP402: Device Profile for Drives/Motion Control.

Originally available with just a 3-pin Deutsch, the 2-pin option allows the 784 Series to serve a wider range of applications, including those with limited installation space.

Version 8.2 of Simatic PCS 7 offers networked plant monitoring. Web systems can now also be operated and observed over the Intranet/Internet with Simatic PCS 7

RoHS-approved materials and tribologically-optimized plastic blends to help the A181 perform in both rotary and pivoting movements in bottling, packaging, and processing applications.

Dematic RapidStore UL1400 is an alternative automated storage and retrieval system (AS/RS) that is designed to retrofit into existing manual warehouses with low to medium building heights.

Typical applications, for the IGD962-8A would include high frequency welding systems, solar converters, uninterruptible power supplies (UPS) and automotive/appliance motor drives.

The solution will help industrial plants optimize automation project execution, reduce loop commissioning time, minimize operational risk and protect intellectual investments while keeping current with today’s technology.

The portfolio covers direct and indirect press hardening as well as pressure controlled hardening (PCH). Solutions are provided for various process stages: position control before and after the oven as well as in the press; parts temperature monitoring before and after the press; and temperature monitoring of the tappet guide rails.

The tGW-735i allows a Modbus TCP host to communicate with up to 3 serial Modbus RTU/ASCII devices through an Ethernet network, thus saving the cabling costs

Designed for all EA3-series C-more Micro panels, it adds an Ethernet (RJ45) port for programming and PLC communications at 10/100 Mbps.

The electrically-driven E-Cart is designed to handle the heavy loads associated with assembly operations, and with the new assembly-focused, anti-tip configurations it can remove the barriers found in traditional assembly layouts with vertical conveyors

Areas of application for these encoders include oil and gas facilities, underground mines, chemical plants, milling operations and grain-handling facilities.

The NCM01-04-001-2IB and the NCC01-04-001-1X are designed to be miniature versions of H2W's moving coil and moving magnet voice coil actuators

High Cycle-Life On/Off Angle Seat Valves

The GA26W is equipped with standard chatter control function that automatically adjusts wheel speed for accurate, stable machining, and a 7.5kW grinding wheel spindle, ideal for grinding mass produced parts.

The Han ES Press connector is based on a cage clamp terminal and enables installation and contact bridging with prefabricated jumpers.

The D200 precision laser driver is supported by up to 4 amps of regulated drive current with a built-in edge-triggered pulse generator provides up to 1us pulse widths.

The compact camera design fits on the UR wrist and offers direct connectivity to the controller, while the camera software is embedded within the user interface.

The 2271A is ideal for calibration laboratories that are adding pressure calibration services because it features a range of pressure measurement capabilities.

Featuring time-of-flight technology, the laser measurement sensor ensures accurate distance measurements out to 12 meters. This enables sensing in long-range applications, including loop control, part presence or absence and fill level.

Measuring 3.000 x 5.000 x 1.382 inches (76.20 x 127.00 x 35.12mm) with a density up to 18W/inch3, the CFM300M series has a wide universal input voltage range of 90~264VAC and is available in single output voltages of 12, 24, 36, and 48VDC.

The PyroNFC-K has a simulated thermocouple output, to enable the use of IR temperature sensors in place of thermocouples. Its side-entry cable and length of just 29 mm make it easy to mount in confined spaces.

The MR-J4-TM includes standard IEC61158 Type12 CAN application protocol over EtherCAT (CoE), IEC61800-7 CiA402 drive profile. It also comes with add-on instructions for EtherNet/IP networks using ControlLogix or CompactLogix controllers.

Exaquantum is a plant information management system that is used in many industries. Release R3.02 provides improved web and data analysis functions that will enhance plant operations.

Tara is based on the 1/3-inch MT9V024, a WVGA Global shutter monochrome CMOS image sensor from OnSemi. This stereo vision camera provides synchronized sensor frames to the host machine over USB 3.0 interface.

With security solutions architected to be integrated, automated and simple to use, the Cisco security portfolio provides companies an effective approach for securing their digital business models.

Applications will include Lead Frame inspection for die placement, epoxy and wire bond as well as demonstrating new surface inspection capabilities.

The RM Series rotary switches are designed for use in next-generation building automation systems, including lighting and fan controls, and test and measurement equipment.

Designed for semiconductor processes that demand fast response and repeatable delivery of process gases with high- and ultra-high levels of purity, the GF100 Series is made to ensure precise and stable process gas flow control over time.

The ISL70617SEH enables higher common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR), at all gain settings. Designers can program the in-amp’s gain from 0.1 to 10,000 using two external resistors.

The GLX-3 welder from Branson, an Emerson business, is designed for large-format parts that require greater laser and clamping power.

Each of the Zen units has a narrowed scope of application to make it easier for consulting-specifying engineers to identify the unit that best matches their application needs.

GAM’s SPH Flange Gearbox has a single piece steel housing and ring gear machined directly inside for maximum stiffness.

Typical applications for the LGR-ICOST Model 950 include monitoring trace components in calibration and industrial blanket gases; hydrogen and hydrocarbons; fuel gas and natural gas pipelines; stack gases; and many more industrial uses.

The multi-spot measuring principle from Baumer is based on the light section method. In the sensor, up to 600 measured values of an object are recorded and the distance is then calculated on the basis of intelligent analysis.

The ME-IO can accommodate up to 60 connection points in an 18-mm wide package. If the job requires more space for complex designs or larger components, larger widths of 37.6 mm and 75.2 mm are also available.

These products are based on ADLINK’s Modular Industrial Cloud Architecture (MICA), an industrial-grade delivery system designed to support the native virtualization requirements for software-defined networking (SDN) and network function virtualization (NFV)