Industry Products

The motors meet standards of IE3 efficiency class, according to the international standard IEC 60034-30.

LP35 meets UL, ATEX, and IECEx standards allowing for operation directly in Division 1, Zone 1 environments.

By means of industrial RFID, Mold ID makes the use of injection molds traceable and ensures their optimal utilization.

Enhancements in release 2.0 let the CyberVille platform be deployed on low-cost embedded computing edge devices.

This machine tool is available in two bed lengths and is excellent for machining parts for several industries.

LMX-0501G-SFP is a 5-port industrial gigabit managed Ethernet switch that supports a 12-48VDC power input

The Productivity2000 is a modular, rack-based system with a full lineup of discrete, analog and specialty I/O modules. Price: $255.

Unnamed LVDTs are available as M12 or M18 versions with external thread and capture measuring lengths of up to 2, 5, 10 or 20 mm.

LVDTs are available in ranges from 3 inches (75 mm) to 15 inches (375 mm).

The CoaXPress interface offers lower cost cables, longer cable lengths and a single cable solution to provide image data, camera control as well as power supply.

The iQ-F Series offers synchronized motion control, data logging, and security features.

Super Sabre delivers 34.0A per blade in a 7.50mm pitch connector, and withstand temperatures of up to +125°C

SwirlMaster and VortexMaster can measure volume, mass and energy flow in a single device.

SC series level switch can be used to detect the presence and absence of liquids and slurries over a very wide range of material densities from S.G. of 0.7 and above.

Listed as UL 2250 Type ITC (Instrumentation Tray Cables) and UL 13 Type PLTC (Power Limited Tray Cables), this instrumentation cable can be used for instrumentation and control circuits operating at 150 volts or less and 5 amperes or less.

Designed for the operation of gate, globe and sluice valves and penstocks, IS21 has a thrust rating of 4350 kN for manual operation and 2900 kN for motorized operation.

MCP39F511 provides real-time measurement of AC power. Price: $1.82 each.

Ultra Capacitor Modules DC/UPS can be used in place of a battery system to ensure back-up power.

This release includes support for the AM437x evaluation module (EVM) general purpose board.

Ultramat 7 and Calomat 7 modules measure hydrogen, noble gases, carbon monoxide and carbon dioxide.

Flender N-Bipex is available in ten sizes made of high-quality nodular cast iron.

The Sitop UPS1600 DC UPS with Ethernet/Profinet interface has been integrated into the Simatic PCS 7 process control system.

LMP-0601G-SFP and LMP-0601G-SFP-24 are 6-port industrial PoE+ managed Ethernet switches.

RSS16 is for safety circuits of hinged, sliding, or removable safety guards.

Digital dashboard monitors, measures and manages cyber security risk for control systems for refineries, power plants and other automated production sites.

RS3 upgrade package doubles the scan rate of the previous integrated laser scanner, enabling users to inspect parts in approximately half the time.

The Embedded Cryptographic Toolkit (ECT) is a complete set of standards-based, platform-agnostic security protocols with a FIPS 140-2 compliant, Suite B, cryptographic algorithm library.

Four standard models operate from autoranging inputs of 90 to 132 VAC or 180 to 264 VAC.

IFW320 is an industrial 2-port Gigabit firewall with network address translation (NAT) and VPN.

MCS-2040 targets video analytics, video conferencing and transcoding for CDNs with anapplication-ready intelligent platform.

Standard functions include sourcing and reading of 14 T/C types, 12 RTD curves, millivolts and ohms.

SureMotion power transmission products includes timing pulleys (or sprockets), bushings and timing belts that allow a user to change speed and torque while connecting mechanically rotating components.

The cable works with RJ45, PushPull RJ45, M12 D-coded, M12 X-coded, RJ45 Harting Industrial Form Factor and RJ45 Keystone.

The 16-bit touchscreen enables data entry and display of variable data, including color Trend graphs and alarm screens.

LAN9252 has two 10/100 Ethernet transceivers that support both fiber and copper, along with cable diagnostics capabilities.

Enhancements include cable routing and accurate cable length and sizing calculations

AbraxSys expands it's 24” rugged LCD product line offering either 1920 x 1200 (WUXGA) format or 1920 x 1080 (1080P) true high- definition resolution. AbraxSys industrial 24" LCD models meet agrowing demand for 16:9 or 16:10 aspect ratio high definition displays. AbraxSys Corporation's 24" LCDs feature extended operational temperatures, true industrial grade TFT flat panels, a multitude of inputs including VGA, DVI, S-Video and Composite, and many other possible configurations; including standard brightness levels, 300 nits or 500 nits, as well as a high bright 1000 nits sunlight readable option.

Rosemount 705 monitors turbine meters in remote applications.

VIBbox is a portable system with 64 IEPE input channels, 8 stimulus D/A channels, 4 tachometer channels, digital I/O, counter/timer, and measure counter channels.

The MAQ20 OPC server uses Kepware Technologies’ KEPServerEX OPC Server and Modbus TCP driver.

Mini-ITX series is only 25 mm in height

EQUUSTEK INCREASES WARRANTY TO 5 YEARS

LPD displays can be inserted into a 4-20 mA loop-powered sensor system to provide a local display without additional wiring.

The fido5200 REM Switch chip is configured via software driver as an EtherCAT Slave Controller (ESC) that supports cycle times down to 12.5µs.

SNK terminal blocks are now pluggable.

Glare sensor recognizes and differentiates objects on the basis of their gloss in order to control production processes.

Whether you are designing a new SCADA system or just adding new instruments to an existing control network, Acromag's Ethernet I/O modules can simplify the task.

System has 10 serial ports, low-power Intel Atom CPU, VGA display output, 2 Gigabit Ethernet RJ45 and 4 USB 2.0 ports

The unit can simultaneously measure Reid Vapour Pressure Equivalent and True Vapour pressure according to AS D6377.

Labeling allows engineers to reduce time for planning or customizing operating devices.

MAXREFDES79# features four ports and a complete software stack in an easy-to-use development platform.

ETC is now available for Dual Cabinet Cooler Systems installed on large or high heat load enclosures.

Enhancements include J1939 / NMEA2000 Connectivity and SD card data logging

The outer diameter has been slimmed down to 16.5 mm, allowing a high integration density to be achieved with appropriate devices such as switches.

The data logger comes with an LCD display to show a variety of temperature, humidity and module status data.

Five sensing modes are available including background suppression, diffuse, retroreflective, through-beam and contrast.

Services now include alarm management benchmark assessments, alarm philosophy, alarm rationalisation, nuisance alarm remediation, advance alarm handling techniques, and alarm management training.

The ultra low-flow Meter/Controller has an EtherCAT interface.

LNX-0702C-SFP has five RJ45 10/100Tx ports and two dual rate (100/1000) SFP slots.

Boards are based on the Intel Core Processor U Series

The web service enables easier sharing of job information with existing ERP and MES Software

Without power supply, modular design, 3KVDC Isolation (input-output)

Analog Current signal to RS485 or RS232 Converter, Slim-line plastic housing with integral 35mm DIN rail mounting, LED indication and terminals,power supply(8-32VDC)

Features: >> Small size, standard SIP12 package >> Precision grade: 0.5 >> 0-1Vrms (50 ~ 60Hz) AC signal input

Module makes it possible to decelerate devices and machines evenly and gently.

ECS-4000 box PC has a 5th generation Intel Core i7 CPU (Broadwell-U).

CEM841 is equipped with double deck DDR3L SO-DIMM sockets supporting system memory maximum up to 8 GB.

TE1 sensors have integrated microprocessor and associated circuitry to provide signal conditioning for a current or voltage output signal.

IMRL series solid state relay modules have a transparent enclosure for easy contact inspection.

Series PFH heater helps maintain clean and dry conditions within electrical enclosures, control cabinets, consoles, and kiosks.

Enhancements provide power updates every 200 milliseconds, allowing for a utility feed-in response time of 500 milliseconds

Single channel Type K thermocouple amplifier module converts the low output voltage signal from a Type K thermocouple probe to a single independent linearized 0 to 5 VDC output voltage.

PD2-C for laboratory automation has a flange size of 42 mm and integrated motor controller.

The tGW-715i allows a ModbusTCP host to communicate with Modbus RTU/ASCII devices through an Ethernet network.

With the industry’s strongest portfolio of automation technologies, Bosch Rexroth offers proven systems engineered for maximum productivity.

The Food series is completely dust and waterproof with an IP69K (NEMA 4X) rated V2A stainless steel enclosure and gap-free design, allowing for easy cleaning and sterilization.

Stratix 5400 switch is available in 18 different models and offers up to 20 gigabit ports in a single switch to meet a wide range of application needs.

Switch has five 10/100/1000Tx Fast Ethernet ports and one dual rate 100/1000T SFP slot for fiber.

System monitors, controls and optimizes the chemical injection process at oil wells.

PowerINSIGHT 2.0 now enables rapid, real-time, side-by-side comparison of results from multiple runs.

These industrial PCs are designed for maintenance-free, uninterrupted duty in severe ambient temperatures of up to 50 degrees Celsius.

Updates in groov 3.0 include screen development tools, simulated tag database, and event notifications.

SMARC-FiMX6 runs a Freescale i.MX6 processor based on the ARM Cortex-A9 architecture with a choice of solo, dual lite, dual or quad-core processors.

SP-5000M-CXP4 (monochrome) and SP-5000C-CXP4 (color) cameras can run at their maximum full frame rate of 253.8 frames per second.

IXARC magnetic rotary encoders now have PROFINET and EtherCAT communications interfaces.

The vision guided assembly cell automatically assembles small, performance-critical components, like cameras, microphones, speakers, touch screens and vibras.

CP-Link 4 enables up to 100 m cable runs for industrial multi-touch displays

TopView can now act as an SNMP agent that can send SNMP Trap messages for TopView alarms.

Tropos 6420-XA outdoor broadband mesh router is an oil well pad communications hub for all life cycle phases from lease to production.

LNP-0802C-SFP and LNP-0802C-SFP-24 series are 8-port industrial PoE+ gigabit unmanaged Ethernet switches.

Applications include motion simulation, image stabilization test equipment, vibration simulation, precision positioning and alignment of opto-mechanical components

SafeMOTION Release 1.9 updates the safety functions for the ACOPOSmulti servo drive family.

Powered by an Intel Celeron N2930 Quad-Core 1.83GHz processor, the PC5024 features a 24 inch monitor with 1920 x 1080 pixels full HD resolutions, projected capacitive multi- touch screen and an IP65 rated front bezel. This enclosed system also includes a dual 10/100/1000 Mbps LAN, 2 USB ports, 4 serial ports, HDMI output, and 4 GB DDR3 Memory module which is scalable up to 8 Giga bytes.

Service and maintenance staff can use the extra interface to directly access the configuration of the connected gateways.

Bevel gearboxes are for the manual operation of AWWA standard C560 cast iron and C561 fabricated stainless steel gate valves.

Additions include HSPA+ cellular, PROFIBUS and DeviceNet modules.

Available in 2k and 4k resolution, the Linea GigE models deliver fast line rates of 80 kHz with high sensitivity.

SPG-120-REV system enables acquisition of the spectral characteristics of solar cell materials, semiconductors, light detecting elements, fluorescent substances and other optical devices.

The Size 8 double stack stepper motor linear actuators are available in captive, non-captive and external linear versions.

Planetary rover prototype navigates simulated lunar and Martian terrains as it performs a series of tasks using smart cameras with vision algorithms. Download the white paper

BOA products are highly integrated vision systems with embedded application software for positioning, identifying, verifying, measuring and flaw detection. See the video

Before choosing a vision system, learn about the important differences between systems that make one more suitable than another for any given application. Download white paper

The Linea 2K and 4K GigE line scan cameras include our TurboDriveTM technology, which defies the GigE bandwidth limitation (up to 80kHz line rate) with no loss of image quality. Get production information

Zaber’s A-LST high load linear stages with built-in controllers have 100 kg of load capacity and up to 1500 mm of travel. Versions with encoders and dust covers are also available.

Q series indicators are available in red, green, yellow, blue and white.

Version 3.6 is built on a complete 64-bit architecture, including double precision floating point calculations and extended support of 64 simulation nodes.

Additional LVITs (Linear Variable Inductive Transducers) include automation, industrial and extreme duty sensors.

Six standard models operate from a universal input of 85 to 264 VAC; providing tightly regulated single outputs of 3.3, 5, 9, 12, 15 and 24 VDC.

LNX-0802C-SFP series is an 8-port industrial gigabit unmanaged Ethernet switch, with 6 RJ45 10/100Tx and 2 Gigabit combo ports

DE1 combines the ease of a motor starter with the versatility of a variable frequency drive.

Omni-MIMO includes two 698-2700 MHz X-Pol antennas neatly under one radome.

The software helps operators achieve greater production, reduce lifecycle costs, ensure consistency between sites, and reduce the likelihood of HSE events.

The industrial PC has a Profinet fieldbus interface with three ports.

Ring modules create optical redundant ring topologies with multi-mode and single-mode technology.

MWT corrosion monitoring instrument integrates with any other ISA100 wireless system.

LMP-0602 and LMP-0602-24 are 6-port industrial PoE+ managed Ethernet switches that support a 48~55VDC high voltage power input or a 12~36VDC low voltage power input.

MS-98G5 is a Mini-ITX board based on Intel 4th Gen QM87/HM86 architecture.

AFI5 includes a remote inductive sensing element and a transmitter with integrated CombiView display.

KS210-IMX6 and KS310-IMX6 fanless Touch Panel PCs utilize Freescale i.MX 6 Cortex-A9 core processor with speed up to 1.0 GHz.

LiquiSonic inline analyzer continuously measures concentrations in process liquids and provides the data online.

This new solution will enable any HTML5 WebSocket compatible browser to display Marquee Manager ANDON data on smartphones, tablets and Cisco Edge digital media players (DMP) connected to LCD displays.

MC6 Workstation offers calibration capabilities for pressure, temperature and various electrical signals.

Enhancements include advanced safety process management, sophisticated multi-level workflow, and serialized tool and component tracking.

With multi-I/O connectivity, this fanless embedded vision system is suited to multi-camera imaging applications.

ATX, µATX and mini-ITX single board computers can simultaneously drive three displays.

Turbidity sensor provides fast, laboratory-quality measurements in real-time for the entire water purification process and many other process applications.

MH24 six-axis robot is suitable for assembly, dispensing, material handling, machine tending and packaging applications.

Yaskawa releases MP3300iec controller, VIPA SLIO I/O and MotionWorks IEC v3 software, which work together.

The 32 mm TBEN-S modules can be operated automatically in PROFINET, Modbus TCP or EtherNet/IP.

The APC-3X20 series offers 12.1”, 19” and 24” LCD sizes equipped with wide viewing angle screens to fit different vessel requirements.

V280 features 48 individually isolated digital inputs.

BNF Technology is the software company providing optimized solutions for operation and management of process plants. As the company named BNF Technology Inc. has been found since November 2000, our process solutions are wildly spread into South Korea’s market and over the world. Our business was started with nuclear power industry and the business is expanded to various types of power, seawarter desalination, pertrochemical, oil&gas, aluminum plant and etc.

Simocode pro V Modbus RTU enables existing measuring modules and expansion modules, operator panels, and the DM-F Local safety module to be used under Modbus.

Enhancements in V 6.0 include more alarm and recipe features, additional math and tag logic, plus improved Windows compatibility.

LMX-0600 is a 6-port industrial managed Ethernet switch that supports a 12-48VDC power input.

With integrated Intel HD graphics, it is designed to deliver enhanced video and 3D graphics.

Enhancements include a feature that monitors hourly, daily, weekly or monthly machine tool capability for maximized productivity and profitability.

The RTD sensor measures temperature, while detecting overvoltage, shorts, and open circuits.

Designed for data rates of up to 10 Gbps, the connectors have IP65/67 protection against dirt, dust, and humidity.

Model 3800 Series pressure transmitter is available in seven unique ranges from 0 to 10,000 PSI.

PICO840 is built to withstand extreme temperature, ranging from -40°C to +70°C (-40°F to +158°F).

Model # MMP TM40-285C-24V GP42-169 BR-003 EC-032 (whew!) has an integral Failsafe Brake and optical encoder.

The repackaged CA 10 to 40 motors are now smaller and lighter, yet nothing has changed in their output.

By inserting field installable FlexCard modules, users can now populate PAX2C PID controllers in more than 150 configurations to monitor and control multiple application processes on a single display.

XMold and eMold EtherCAT-based controllers automate injection molding machines.

Bridge block makes potential multiplication in the connector possible.

LNP-0702C-SFP and LNP--0702C-SFP-24 are 7-port industrial PoE+ gigabit unmanaged Ethernet switches.

IP66-rated DC-DC converters are designed and built for extreme applications that require a waterproof, dust-proof, sand-proof, oil-, fire- and/or explosion-proof solution.

The SCSI-Flash back-up and restore capability enables vital data back-ups of old process control systems to be made as a complete disk image at any given point in time and transferred via Ethernet.

Better security was added to Wind River Open Virtualization, Security Profile for Wind River Linux, and Carrier Grade Profile for Wind River Linux.

FLEX I/O modules designed for extreme conditions are now available for process applications that support HART protocol

MXE-200/200i series withstands industrial grade EMI/EMS, is operable in harsh environments, and combines a controller and IoT gateway.

ZipLine provides measurement for continuous web solution (CWS) applications such as plastics, films, non-wovens and other flat-sheet applications.

With the digital EnDat 2.2 interface, the most common safety functions can be used with hybrid motor cables.

Integral slam-shut minimizes cost of ownership by providing a long service life and easy maintenance.

Data modems offer long-range communications up to 40 miles to extend Ethernet networks into difficult-to-access locations.

ML100 is based on Intel’s NUC platform with a ruggedized enclosure. Prices start at $500.

CDTX-111/CDTX-112 conductivity controllers provide online monitoring of industrial process conductivity. Price Starts at $230.

IP65 sealed units are available for NEMA23 Lexium MDrive products with M12 circular connectors.

APLEX Technology Inc., a global industrial computer product solution provider, today announced a new promotion program for its industrial Panel PC – APC-3X93R series that features Intel Atom D2550 processor and provides full IP65 compliance and IP69K certified. The APC-3X93R series equipped with resistive touch screen provides cost-effective, consistent and durable performance and has LCD sizes available at 15”/17”/19”, each targeting different applications and markets.

Six standard models operate from a universal input of 85VAC to 264 VAC and provide regulated single outputs of 3.3, 5, 9, 12, 15, or 24 VDC.

Updates include larger memory and a graphical LCD with a resolution of 128x64pixels. Price: from $118.

USB board includes 24 Relays, rated at 5 Amp both @ 30VDC and 250VAC, and 24 Isolated digital inputs.

Sealed linear stage keeps contamination such as manufacturing debris, particulate or liquid contaminants outside the stage housing.

InterMax enables use of EtherNet/IP, Modbus TCP, Profinet and others on existing plant wiring.

Enhancements in V6.0 include a custom-device plug-in capability for connecting third-party devices.

750R series are 10 Amp general purpose relays designed for a wide range of applications, from power to sequence controls in various factory machines and control panels. Price: From $7.75.

SRMW-24R-SS is a 24” waterproof sunlight readable industrial-grade LCD monitor.

8 input channel Current/Voltage signal to RS485/232 Converter,24-bit AD converter, accuracy>0.05%

Resistance and potentiometer to DC signal isolators

Enhancements speed up and optimize how new recipes and recipe variations are adopted.

STE-708 and STE-716 serial-to-Ethernet device servers transmit any standard serial RS232 or RS422/485 data through a TCP/IP Ethernet based network.

The 203, 205i, and 210i have updated dual-function keys enabling users to set up their meter, run diagnostics, and view flow and totalizer data.

Vert-X 2400 sensors convert rotational angle into a voltage output.

Pro-16 provides traditional single loop control for standard applications while including a built-in programmer with 16 segments and up to 16 profiles for batch ovens.

Logbooks enables operators to electronically document activity records to streamline shift changes, drive operator action, and accelerate decision-making.

Zaber’s G-LSQ Series gantry systems are complete, turn-key solutions that include the controller (A-MCB2 two-axis controller), power supply, and all the accessories needed for operation.

1008TX is a plug-and-play, unmanaged Gigabit Ethernet switch housed in a hardened, metal DIN-rail mountable enclosure.

The STC-15W04 is compliant with UL Class 1 Division 2, ATEX Zone 2, and IECEx hazardous locations standards.

MGL safety switches combine magnetic locking and RFID technology to provide non-contact operation with a high degree of anti-tamper protection.

Measurz EST provides users with a cloud-based toolkit to make informed choices and realize savings through demand shaving, demand shedding and net metering. Price: $4,995 or $499 per month.

Server allows Ethernet and Internet connectivity to any RS-232 and RS-422/485 device

ANR2 is a 2-channel LVDT/RVDT interface that communicates with a host controller (PLC or PAC) over the network.

Lynx Enterprise Manager 1100 controls up to 100 robots for large deployments in manufacturing, warehousing/logistics and semiconductor applications.

The sensor’s narrow housing allows it to be mounted in tight spaces so OEMs and System Integrators can easily integrate it into inspection machines.

The device provides differential pressure, static pressure and temperature measurement from a single transmitter.

The IP69K rated lights are ideal for diverse automation and industrial machinery.

Offered in four sizes with torque ratings up to 110Nm, the EDC is available in standard lengths up to 3m.

Powered by Celeron N2807 1.58GHz Dual Core processor with 2 GB of DDR3 SO-DIMM memory and 30GB mSATA SSD, the PC5070 supports dual LAN ports, 2 USB ports, 2 serial port to accommodate connectivity requirements.

Enhancements include an improved calibration process with an integrated laser engraving system.

Design Space Exchange supports data exchange between mechanical construction and control system technology in control cabinet and switchgear construction.

Pwr TwinBlade cable connector is a cable-to board DC power distribution connector supporting 140 amps per linear inch.

Q-Motion positioning stages are 22mm wide with travel ranges from ½" to 1 inch (26mm).

With multiple coil options, including Class I Division 1(FM) or intrinsic safety, the VSNC is suitable for hazardous locations.

TOPFLEX cables have conductor temperature resistances of 90°C, C allowing a higher current load rating.

Intended for use with screened or fully shielded Ethernet cable, the K jack is fully shielded (zinc die cast) and uses IDC technology to facilitate an easy to use field termination.

Stainless steel sensor has a digital i2C interface

CL3-E controls small stepper and BLDC motors with a continuous output of up to 70 W.

Release 3 contains 5,000 additional vector symbols and flexible ways to link Assets and Tags with dynamic graphical representation.

LNP-1002C-SFP and LNP-1002C-SFP-24 series are 10-port industrial PoE+ gigabit unmanaged Ethernet switches.