Industry Products

NI-XNET embedded networks platform consists of 14 new high-performance PCI- and PXI-based interfaces for FlexRay and CAN and a new, universal API for rapid application development.

Improvements include new features that enhance performance of display updates, support the use of scalable text in input object templates, and allow the setting of background color for Scalable Text objects.

No single vendor can match TC Communication’s extensive line of fiber optic multiplexers. Ideal for Utility & Industrial networks. You can multiplex nearly any combination of Voice, Data or Ethernet. Big savings by maximizing fiber usage and eliminate unnecessary hardware. Easy installation & proven reliability.

Discover the widest selection of Fiber Optic modems, Converters, Extenders, Transceivers, Data Links & Serial Interfaces in the Industrial industry. TC Communications Serial (RS-232, RS-485, RS-366 etc.) Ethernet, Voice, T1/E1 and T3/E3 Fiber Modems provide efficient, affordable solutions to all popular network connectivity issues. Some models Profibus Compatible.

You get the latest in Ethernet, VoIP, Fiber Optic & Serial Industrial Voice Solutions from TC Communications. Move voice communications over to IP/Ethernet platforms with the TC3848 VoIP Virtual PBX. Other TC products extend Phones, Voice & Intercom over Ethernet, Fiber Optic or RS-232. Ideal for private LANs.

Migrate from TDM to Ethernet on one Industrial hardened Gigabit Ethernet platform. TC Communication’s JumboSwitch® Series is much more than a standard Industrial Ethernet Switch. You get a fully managed Gigabit Ethernet Backbone Switch that integrates Ethernet, Serial, Voice, SCADA & Teleprotection & supports all popular TDM & Legacy interfaces.

CXLdp is available in bidirectional and unidirectional ranges from 0/0.1 through 0/25.0” H20 and in accuracies of ±0.8 and 0.4% FS.

AutomationDirect extended its NITRA pneumatic product line to include a series of stainless steel, round body, non-repairable cylinders.

Enhancements include new barcode symbologies and improvements to the user interface and help systems.

LMS111 non-contact sensor is for outdoor anti-collision environments, while LMS100 is for indoor profiling applications.

Light curtains and grids can be mounted to protect the perimeter of a machine, robot or other equipment.

The oscilloscope-based solution lowers cost by nearly 50 percent, removes complexity and improves usability compared to solutions that require up to three separate instruments.

F36 encoders are only 36 mm with a hollow shaft diameter of up to 10 mm, making them well suited for drive engineering applications.

Slim GOT-5840T-830 supports an ultra low-power Intel Atom processor N270 1.60 GHz with the Mobile Intel 945GSE Express chipset.

The connectors provide a convenient means for passing a RJ45 cable to the inside of a panel or piece of equipment without shutting down or opening the door of the equipment.

Board has 32 analog inputs, two analog outputs with 16-bit resolution, 16 digital I/O lines, two 32-bit counter/timers, and a USB 2.0 interface.

Version 2.0 helps create near photo-realistic images, animations, and videos from 3D models in real-time.

In today’s fast paced, uncompromising industrial automation market, customers want 24/7 online ordering capability, comprehensive technical support and ready access to product information.

The STM is a stepper drive and motor unit fused into a single device that offers significant savings on space, wiring and cost when compared with conventional motor and drive solutions.

Earn frequent flyer miles when you purchase products on Servo2Go!

These drives offer advanced features to provide absolute maximum performance benefits from a stepper motor, and provide software selectable resolutions from 200 to 51,200 steps/rev at speeds up to 50 rps.

The Si2035 Starter Kit comprises: 1pc Si2035 Indexer/Drive with Development Software 4023-820-001 Motor Programming and Power Cables.

PITTMAN Series 14000 brush-commutated DC motors from Servo2Go.com feature 11-slot skewed armatures to minimize magnetic cogging (or reluctance torque) and promote quiet and smooth operation.

PITTMAN Series GM14000 brush-commutated DC gearmotors from Servo2Go.com feature 11-slot skewed armatures to minimize magnetic cogging (or reluctance torque) and promote quiet and smooth operation.

Made from Germanium substrate, the IR filters are suited for eliminating hot spots in thermal images.

This PCI Express card features eight RS-232 ports in a low profile (MD1) form factor. Each RS-232 port is capable of supporting data rates up to 921.6kbps.

PV sets are designed for small-scale systems with a solar string or PV systems with several solar strings.

IDM140 lightweight scanner reads all common 1D bar codes, including poorly printed or damaged codes.

All uEye cameras now interface with VisionPro and CVL software from Cognex.

Version 8.0 can record one million tags in one second.

Motoman offers a customized version of Agile Planet's Kinematix manipulation software for dual-arm robots.

This sensor can be adapted to a wide range of belt drive systems and can be installed in a dynamometer test stand or on vehicle.

m-VROC has a wide measurement range (0.1 to 100k cP viscosity) and high shear rates, making it capable of analyzing virtually any liquid viscosity value.

Probe provides support for symmetric multiprocessing (SMP) operating systems, plus ARM Cortex A8-based processors.

Certified by MIL-STD-810F and MIL-STD-461E standards, PWS-8033M has an IP67 rating guaranteeing total protection against dirt, dust, and even complete immersion in under 1.2m of water.

TessEm9000 is compatible with the TESSELATOR 9800 product family and will run on any PC platform with Windows Vista, Windows 2000 or Windows XP operating system installed.

The sensors feature one-piece construction and IP 68 and IP 68K ratings, making them particularly suitable for food and beverage industry applications requiring frequent washdowns.

Galaxy 900 operates in the licensed 900 MHz band for spectrum-efficient transmission over distances of 30 miles or more in a single link.

Version 2.0 now supports mobile field workers through integration with Wonderware Mobile Solutions.

Parker Hannifin combined its Motion & Control and Fluid Connectors operations in Canada into one division, the Parker Canada Division.

DL8000 adds a vapor recovery measurement system to increase billing integrity and ensure accurate accounting for valuable light hydrocarbons in liquid custody transfer applications.

5628G is compliant with IEC61850-3 and IEEE1613 environmental certifications and specifically designed for deployment in power substations.

Actuators are available in six small sizes (RS) and six large sizes (RSH), as well as in Clean Room Class 10 versions.

Suitable for pick-and-place applications, CSC12M25BMP19 is a CMOS-based machine vision camera with a twelve-megapixel 1.9-inch CMOS monochrome progressive scan sensor.

The 5300 series makes it possible to meet safety requirements while maintaining maximum plant availability and reducing lifecycle costs.

LAR31 rotary actuator now has a vacuum-though shaft that eliminates common dust problems in pick and place applications.

USB-7202 and USB-7204 use Message-Based DAQ (MBD), an O/S-independent protocol that allows DAQ devices to be programmed with simple text-based messages.

The electroluminescent display, a technology originally built for military jet fighters, can be seen in direct sunlight

With 2,048 channels, Model 4990A can be used for both small- and large-scale testing applications, including NVH, modal and structural analysis.

Standing just 5 mm tall with a 2.5 mm centerline, the PTSM spring-cage connector is rated for 6 amps.

PDT Series signals when pumps need servicing.

Model 294 transmitters have both ±10 Vdc and ±20mA configurations.

Visual KPI now provides Palm Pre users with on-demand operations, financial and infrastructure data via the phone’s Palm webOS based browser.

The light fixture provides for uniform illumination of the key, which increases the readability of the key label.

ScadaMobile is a native iPhone app that provides access to variables and memory of programmable logic controllers (PLCs).

EZ-ZONE is available with choice of horizontal or vertical configuration, allowing it to fit variable cabinet profiles.

Enhancements in IGSS version 8.0 allow end users to generate individual dashboards, graphs, audit trail and object watch on demand at plant floor level.

Additions include a through-hole option (H pin style), increased standard rotor slot offering to accommodate 4 and 3.5 mm dia D-shafts, and resistance values ranging from 2.5K to 100K ohms.

Breakers include the DIN-rail mount 787-860, 787-861 and 787-862. Each protect up to four current paths at up to 10A at 24VDC max.

Microprocessor-based drives can be programmed to suit a wide variety of applications, including conveyor belts, transport drives, packaging machines, pumps and fans.

Redundant Profibus DP functionality has two configurations. Single-master redundancy scheme involves a single controller and redundant Profibus boards in the actuator. In multi-master setup, standby units are employed on both the master and slave sides to create two independent networks.

Software solution helps Food & Beverage and Consumer Packaged Goods manufacturers reduce the variation in performance, cost and quality for more consistent work processes and better brand protection.

Enhancements in Version 6.3 include suppression of alarm floods, state-based alarming, alarm configuration auditing and enforcement, and shelved alarms.

FlexLine wireless radar gauge helps process manufacturers monitor tank levels and prevent hazardous incidents in their plants and terminals.

Simatic RF620R and RF630R readers enable the design of process chains, which consistently use UHF technology according to EPC and ISO standards.

The radio collects I/O without a remotely located PLC or I/O data concentrator. The bused I/O is made accessible to the network using the readily available MODBUS protocol.

Multi-functional device facilitates image splitting or repeating at high speed of 85MHz.

The EtherCAT (CoE) Network Option Module implements the CANopen drive profile (CiA402) in EtherCAT communication (real-time Ethernet communication).

Enhancements include a redefined peer to peer computing model so that genetic algorithms and neural network models can seamlessly operate across multiple core computers.

Model 7264G has a full bridge, with two fixed resistors to facilitate shunt calibration.

IronHorse general purpose AC motor line has been extended to include 3-phase 1200 RPM six-pole and 3600 RPM two-pole models. Six new 56C 3600 RPM rolled steel motors, and 13 new T-frame cast iron motors in 3600 and 1200 RPM models are available in sizes from 1 to 10 HP.

IronHorse general purpose AC motor line now includes 3-phase 1200 RPM six-pole and 3600 RPM two-pole models.

Enhancements to signal conditioning module include accuracy of 0.2% across all gain and excitation settings with no need for adjustment.

Models include NI PXIe-8102/01 embedded controllers and the $1,499 (USD) NI PXIe-1073 chassis.

Solutions include a series of energy optimization tools that create an integrated industrial energy management system based on Rockwell Automation industrial automation and information technology.

MUP400 signal conditioner has 16-bit resolution and accuracy of ±0.01 of range +1 digit.

SeQent is a provider of real-time automated condition monitoring, dispatch, and visual display management solutions.

RWT 350/360 TorqSense now incorporates an integral sprocket or pulley, allowing easy mounting in plant and machinery such as drum mixers, generators, pump, dynamometers and conveyor drives.

OPE1275 single-channel and OPE2275 dual-channel encoders are for small shaft motors with a diameter of 2mm and a minimum length of 3.8mm. Price: $23.89

EZ-SCREEN now includes low-profile models with a space-saving footprint, ideal for safeguarding of smaller machines.

Product line now has a robust metal connector shielded with an iris spring, which simplifies the connection between the cable shield and the connector body.

Sensors have a one-piece fixed-distance design, eliminating the time-consuming alignment of a separate transmitter and receiver. Prices start at $125.

DLR network technology takes advantage of embedded switch functionality in automation end devices, such as I/O modules and programmable automation controllers.

Z drives offer torque, velocity and position operating modes for brushed, brushless or voice coil motors.

pre-assembled cables and modules are available for the most common industrial PLCs and Micro PLCs from all major manufacturers including Rockwell, Siemens, GE Fanuc, Telemecanique, Omron and ABB.

Autodesk integrated Vela Systems Field BIM Software Suite with Navisworks, extending the building information modeling (BIM) process to the field.

CANatomBOX has two 10/100MBit/s Ethernet ports, an RS232 serial port, and two opto-isolated CAN ports for Windows-based embedded CANbus control applications.

Version 1.6 of Proficy now supports PAC8000 process controllers and the PACSystems redundant Rx3i controllers.

FW-8875 is a platform for enterprise-class network security and acceleration solutions such as UTM, VPN firewall, WAN acceleration and gateway antivirus/anti-spam/URL filtering appliances.

SoftMotion and C Series modules simplify the development of advanced single- and multi-axis motion applications.

With the latest version of LabVIEW, engineers and scientists can use virtualization technology to reduce system cost and size, and deploy distributed measurements across vast physical hardware systems.

WT30 system consists of one master and multiple slave I/O stations with expansion capability for up to 64 slaves (over 1,000 I/O).

PC 35 pluggable terminal block can carry up to 115 amps and accepts wires up to 2 AWG.

Metrology software works with the REVO 5-axis measuring head and UCC2 CMM controller to form a single-source CMM retrofit package.

This compact unit is available with either an 115VAC or 230VAC supply voltage and provides a fixed 15VDC output for powering sensors.

With updates to XVL Filter, XVL Reducer and XVL Processor, manufacturers can now handle XVL v10 files easily and quickly within their integrated manufacturing IT infrastructures.

Software is certified by TÜV to the International Electrotechnical Commission (IEC) EN 61508 standard at Safety Integrity Level 3 (SIL3).

DT9818-32-OEM can embed high performance data acquisition capability directly into a USB system at approximately $40 per channel.

OEM Solutions Pack is a compilation of pre-configured, out-of-the-box graphic objects and screens specifically tailored to machine level HMI/SCADA applications.

Systems combines Gassonic detectors with the modular six-channel MC600 controller to detect natural gas and other combustible gases.

By integrating with the process historian from Canary Labs, Longwatch can not only display all the data from an event, it can show video of what happened out in the plant.

Insitec delivers consistent particle size measurements within the environment of cement plant laboratories.

The 16 X Series DAQ devices provide enhancements to analog I/O, digital I/O, onboard counters and multidevice synchronization.

WSN is a complete remote monitoring solution that consists of LabVIEW graphical programming software and low-power wireless measurement nodes.

ProSense line expands to include three types of Motor Control Relays: Phase Monitoring Relays for phase loss protection, Alternating Relays for motor load protection, and Pump Seal Failure Relays for seal failure detection. Compact design plugs into an industry-standard 8–pin octal socket; DIN rail or panel mounted.

Create custom dashboards, instrumentation graphics, instrumentation widgets, and charts and graph displays with CimQuest INGEAR’s Dashboard and Instrument Controls for Visual Studio.NET 2005.

Design, create and deploy Windows programs, system services, console applications and more for Allen Bradley ControlLogix and CompactLogix PLCs. Options available for runtime free, single machine or single service licensing, as well as for Compact Framework and web service applications. Pricing ranges from $299 to $999.

Design, create and deploy Windows programs, system services, console applications and more for GE Fanuc PLCs. Options available for runtime free, single machine or single service licensing, as well as for Compact Framework and web service applications. Pricing ranges from $299 to $999.

Design, create and deploy Windows programs, system services, console applications and more for Allen Bradley MicroLogix PLCs. Options available for runtime free, single machine or single service licensing, as well as for Compact Framework and web service applications. Pricing ranges from $299 to $999.

Design, create and deploy Windows programs, system services, console applications and more for Modbus PLCs. Options available for runtime free, single machine or single service licensing, as well as for Compact Framework and web service applications. Pricing ranges from $299 to $999.

Ethernet controllers combine a 10/100Base-TX physical interface (PHY) and a Media Access Controller (MAC) with a hardware cryptographic security engine.

When using the ED-Key, users can quickly re-install system configurations to the switch and recover the entire system configuration as well.

Enhancements include peer-to-peer mirrored I/O mapping, superior low-latency response rates (8ms/digital), field calibration, user-defined fail-safe output states, and Modbus compatibility.

ProLine is a current limiting, touch safe, fully coordinated UL 67 panelboard.

PPO dynamically reads, models and auto corrects recipes and can be interfaced to a DCS/SCADA system for a closed loop solution.

R08 gearhead delivers high continuous torque of 0.05 Nm within a smaller overall envelope of 8mm than its comparable models.

ARL 3460 Advantage has four configurations designed for the analysis of cast iron, steel and aluminum samples for foundries and metals processing companies.

TM-770, TM-773NIR, and TM-775NIR cameras give designers a choice of pixel sizes and optical formats.

TW Series meters are drop-in replacements for the Haliburton/NuFlow, Blancett, Cameron and Kimray turbine meters.

Enhancements expand monitoring capability to include CO2 green house gas emissions measurements.

BLUEMARK LED printer consumes 75 percent less energy and reduces the noise level by seven decibels when compared with the original.

Sensors are suitable for detection and distance measurement applications, such as roll diameter control, level control, clear bottle detection and collision avoidance.

Tofino Virtual Private Network (VPN) products securely connect facilities over untrusted networks, such as the Internet.

The progressive scan cameras feature an adjustable frame rate via binning, subsampling or AOI.

proSense includes phase monitoring, alternating and pump seal failure relays.

Series 9 sensors measure the presence and levels of solids, liquids, granules or powders irrespective of color and opacity.

Enhancements in Version 6.0 include the ability to create User Defined Data Types and Variable Indexed Arrays.

High-density connectors provide more I/O points than traditional M12 sensor/actuator connectors. The circular connectors come in 12- and 17-pole versions.

Enhancements include increased processing power, support of multiple image output paths, optimized decoders, and extended XML file content.

Model 670S measures mass flow rates in very large ducts or stacks that have non-uniform velocity profiles, high turn-down requirements, or dirty gas streams.

LE-200 now has an Ethernet/IP interface for longer-distance applications where traditional technology cannot deliver.

7800 series carrier board hosts a PMC/XMC module to fulfill a wide range of software radio, data acquisition and beamforming applications.

MEASURpoint measures any combination of RTD, thermocouple, and voltage ranges from 300µV to 400V.

Bench scale provides multiple weighing modes, configurable software, and interfaces for controlling conveyors and other equipment.

Enclosures are UL, cUL and ATEX certified to house terminal block assemblies in Exe rated Zone 1 & 2 hazardous locations.

SBC84832 incorporates an Intel Atom N270 1.60 GHz processor and the Intel 945GSE+ICH7M chipset on a 3.5 in. board.

Laser station can be used in any application that requires the precision location of components in three-dimensional space.

Fuji electric motor contactors line expands to offer higher AC coil voltage ranges; new SC series components operate with ranges of 440-480V and 500-550V at 60hz available in frame sizes of 43mm, 54mm and 67mm. Low-cost, 30-day return and one year warranty.

TS 642 touch probe is suitable for both older HEIDENHAIN controls as well as current third party controls.

Enhancements to TOP Server Version 5 include 100 device drivers, support for the latest versions of Microsoft Windows, a split configuration and runtime, security, and multi-user Windows Terminal Services support.

Iguana and Moose series Industrial Modbus switch solutions comply with the open standard and do not require an OPC server.

8B33 accepts a single channel of AC input which is converted to its True RMS DC value, then filtered, isolated, amplified, and converted to a standard process voltage or current output.

Enhancements in version 5 include Microsoft Vista and Server 2008 Logo Compliance, and a split Management vs. Run-time operation, enabling management at the user level and operation as a service.

Anybus Communicator intelligent protocol converter connects up to 31 serial Modbus devices to Profibus.

Enterprise Security creates a unified, intelligent building by integrating with diverse facility systems including environmental controls, lighting, energy management, fire and video.

PCIe-7841R, PCIe-7842R, PCIe-7851R and PCIe-7852R combine a Xilinx Virtex-5 FPGA, eight analog inputs, eight analog outputs and 96 digital I/O lines on a single board.

NI 6581 100 MHz digital I/O (DIO) adapter module and NI 6585 200 MHz low-voltage differential signaling (LVDS) DIO module provide application-specific I/O for RF, digital, time-domain and vision inspection systems.

CEM850 is equipped with the new Mobile Intel GM45 and ICH9M chipsets and supports 45nm Intel Core 2 Duo and Celeron M processors.

Additions to product line include 1 & 2 port, low profile and standard height, high speed cards.

ES2171 and ES2172 models each provide 16 channels of process current or voltage output control signals with 16-bit D/A resolution. Prices start at $1300.

PEC-3240 features 4-axis motion control, 32-channel isolated digital I/O, and an Intel Celeron M CPU making it a robust all-in-one automation controller.

H series terminal blocks are available in 24, 32 and 41 amp versions.

SIL725 Annunciator is third party certified by SIRA using the CASS methodology to a safety integrity level of SIL2 to IEC61508.

Sensors are now available in diffuse mode with background evaluation and a sensing range from 50 mm to 150 mm.

The narrow frame is more than eight-inches smaller in width than the current Magnum 4000A frame, and can be applied in 30-inch structures rather than 44-inch structures.

AS1344 high voltage DC-DC boost converter is optimized for biasing of Photodiodes, LCD or PMOLED display powered from single cell batteries.

Enhancements include a wraparound motor mounting kit that allows for longer travel with shorter overall lengths.

Q08 now offers an extended range of 8 mm.

Bulkhead feedthru for Souriau ELIO 38999 fiber optic connectors is available in either jam nut or laser weldable configurations.

The flat profile PCFP25 series was designed for tight locations or for areas with limited access.

Enhancements provide remote engineering content management capabilities, Oracle’s AutoVue 2D Professional embedded as new viewer and enhanced CAD support.

Model 3023A9 contains three miniature quartz laminar shear mode accelerometer elements mounted to a single support and welded into a titanium housing.

The tool allows seamless system diagnostics of a machine from any location using any web browser (Intranet or Internet).

FW-8860 has up to 24 Gb Ethernet ports and optional Cavium Nitrox CN1620 security processor onboard.

The sensor's passive optical design and non-metallic construction allows operation in extreme electromagnetic fields.

Enhancements in Version 3.0 support the new XVL v10 format, which delivers the most compressed 3D format with no loss of accuracy.

Enhancements allow FTIR to accommodate liquids, powders, pastes, as well as reflective and non-reflective solids.

IPC121 barebone rackmount industrial computer is powered by the Intel Core2 Quad processor plus Intel Q45+ICH10DO express chipset.

Recorders support up to 32 IP network cameras, including megapixel models, at speeds up to 30 pictures-per-second per camera with audio.

Motors are available in various sizes offering a wide range of performance capability from 40 Watts to 1700 Watts continuous.

Alarm Annunciator can be used to replace the now obsolete Robinson Alarm logic Units.

EtherNet/IP Made Easy takes the user through all of the key steps of EtherNet/IP network device configuration.

Enhancements include continuous pump option for boiler applications, an override feature and domestic hot water on demand.

38999 Series connector supports up to 128 contacts with EMI shielding while meeting stringent MIL-DTL-38999 series I, II and III standards.

Software allows semiconductor test engineers to import WGL and IEEE 1450 Standard Test Interface Language (STIL) simulation vectors into NI PXI digital test systems.

Products include USBAFT Type A connector and UADKEY-AB shielded USB keystone coupler.

Parker’s PS, PV and PX gearheads are now standard options on the Daedal HPLA and HLE series of belt-driven positioners.

Enhancements include integration of ICS Triplex Trusted SIL 3 triple modular redundant (TMR) technology and the scalable AADvance process safety systems.

Red Lion Data Stations or Modular Controllers equipped with an XCGSM card can send early warnings of process failures via text messaging and email.

Increased Safety (Exe) operators and pilot devices include pilot lights, pushbuttons, mushroom head pushbuttons, emergency stop pushbuttons, and selector switches.

Enhancements include a multi-technology architecture, high performance network, distributed intelligence, expanded interoperability, new grid modernization devices, and additional security.

Enhancements include HMI development using Microsoft Visual Studio 2008 and improved security based on Windows Active Directory or Workgroups.

PCM-3813I offers 2,500 VDC isolation protection and software programmable gain on each analog input channel, protecting computers and connected peripherals from high voltage damage on the input lines.

The panel-mounted Series 713 receptacles are available as rear or front-mountable versions with 4, 5, or 8 gold-plated contacts.

Fuse terminal block accepts the popular 5 x 20mm fuse that is found in many control circuit applications.

RUE-111SE (multimode) and RUE-113SE (single mode) are industrial extended temperature Ethernet to fiber converters with one 10/100 Mbps Ethernet port and one fiber port.

Model 01251 (IRT) allows torque measurement signals to be configured as frequency, analog or a 4-20 MA current loop.

Fanless GOT-5571TL-621 features a 5.7" high brightness (500 nits) VGA LCD with resolution of 640 x 480 pixels, ultra low power AMD LX800 500 MHz processor and NEMA4 / IP65 compliant front bezel.

PC-DMIS CAD-based, 3D vision measurement program is for manual and DCC vision measurement systems, multi-sensor measurement systems and CMMs equipped with vision probes.

Sensors are temperature compensated and calibrated to provide an extremely tight accuracy specification.

Transducer provides accurate and reliable measurements at pressure ranges from 0-500 to 0-5,000 PSI.

Enhancements include advanced calculations and security.

Enhancements make it easier for users to integrate cameras in local and remote areas, combine video data with a wide variety of plant information, and enable operators to access video data from HMI terminals, cellphones or on a PC via the Internet.

GT1900 has a 1600 x 1200 @ 15fps 1/1.8” monochrome CCD sensor.

AutoSave Approval and Audit Trail Modules support electronic approval with detailed audit trails for automated device programs and documents.

The NE0A provides twelve safety inputs, two test outputs and six safety outputs. It can be used as a standalone controller, a safety slave or a DeviceNet standard slave.

To simplify device set-up and installation time, IM interface modules may now be programmed via a PC or on-board push buttons using FDT/DTM software.

Panel PC can be attached to a NEMA 4 19" or 15” TFT LCD screen with matching USB resistive touch screen.

SRF filters have inductance values from 0.55 µH up to 6500 µH and current ratings as high as 5 amps.