Industry Products

Your hunt for FDT consultation services stops here! Talk to Utthunga…

New OPC UA plug-in empowers PACTware users with IIoT solutions

Get more from your HART devices with our NEW I/O DTMs

With the DXF Overlay app from TAGARNO, users can import DXF files to their TAGARNO digital microscope. The file will appear as an overlay and an overview will show where the overlay is positioned in the field of view.

Abaco’s Thunderbolt 3 design extends the functionality of existing test systems without adding more slots. It also delivers portability for test and simulation users and for flight-line use. Typical applications include bus analysis/simulation, system integration activities, and flight-line including 615-3 data loading and MRO (Maintenance,Repair andOverhaul).

The touch panel PC has a full IP65-rated aluminum front bezel for protection from water and dust ingress and features class 5M3 (EN 60721-3-5) and MIL-STD 810F certification for vibration and shock tolerance.

This solution was engineered with lower hardware requirements so it can reside in devices or be integrated directly into a larger mechanical or electrical system

From power supplies, fans, controllers, to main boards, Lanner HybridTCA solutions adopt modular designs to provide technical support and RMA services

The STRIDE MQTT gateway provides hardware setup to add Modbus RTU/TCP devices to an existing MQTT cloud data collection platform. The MQTT gateway interfaces with up to 32 Modbus devices; wired and Wi-Fi gateway models are available.

More than 350 standard ATS heat pipes provide cooling solutions for cloud and edge computing, electric vehicles, aerospace, agtech, robotics, medical and consumer electronics, data communications, telecommunications, HVAC and more.

Standard Air Wipes are CE compliant and available from stock in aluminum in diameters from 3/8″ (13mm) up to 11″ (279mm). Applications include wiping wire; drying inks; cooling hot extruded shapes; and blowoff of water, plating, coatings and dust..

Marktech’s Models MTPD1346D-200 and MTPD1346D-300 are available in active area sizes of 2.0 mm and 3.0 mm, respectively, joining existing series InGaAs PIN photodiodes with 0.1 to 1.5 mm active areas.

ABB’s UNITROL 1000 series is an excitation product that is fully compliant with the European grid code pioneered in Germany. Compliance of ABB UNITROL 1000 devices to the German grid code (VDE-AR-N 4110 and VDE-AR-N 4120) has been validated by the TÜV NORD certification body.

The DGST slide and yoke plate are machined from a single piece of aluminum. Backlash free piston rod/yoke connection contributes to the slide. Twin piston drives and recirculating ball bearing guides provide the DGST with power– from 7.6 to 132.6 lbf (34 to 590 N) at 6 bar.

The system, called micro flizz, can be used with igus’ smart CF.D system, which monitors the data transmission characteristics of the cable in advance and promptly warns of a failure.

The enhancements are intended to help companies to increase user adoption and capture the critical data insights that are essential to continuous improvement.

The Antaira management software on these switches helps monitor, react, and troubleshoot applications. Features such as SNMP Traps, Syslog, and port mirroring can help maintain a system.

The PSRswitch offers an RFID non-contact safety door switch system with M12 connections. The safety switch can be connected in a series with Y distributors, bridge plugs, and SAC cabling.

The small portable device can scan color on any object. It then links to a Color Sensor app which provides the paint color match.

Fluke is adding condition monitoring data to IBM Maximo with Integrated Condition Monitoring for Maximo, a solution that incorporates real-time asset data within existing IBM Maximo workflows.

The embedded CSB200-818 houses a 3.5-inch single board computer powered by an Intel Atom processor E3930, N4200 or N3350 and is equipped with 4GB (default) of DDR3L-1866 system memory that is upgradeable to 8GB.

This 2-watt unit operates on 30V DC and provides 200k ohm resistance. This device is used to support vehicle steering systems.

Marktech Model MTE6063M-UHR visible red LED emitters offer output power, typically 27.5 mW, along with a radiation pattern, and a peak emission wavelength of 630 nm.

These capacitive sensors are suitable for detecting the presence of solids, but are equally good at detecting material or liquids like granulates, sugar, oil, and aqueous media through a nonmetal wall, such as packaging, glass or plastic, with a maximum thickness of 4 mm.

Common applications include maintenance and troubleshooting of gauges, switches, transmitters, transducers, valves, gas meters, flow computers, pumps, and filters. The HPC50 can also replace a deadweight tester.

The Unified Operations Center is a central hub that transforms the control room into a collaborative workspace. Functional silos are broken down by contextualizing operational and business data to enable teams to make better decisions based on accurate, real-time information.

EVT’s Label Alignment and Position Inspector checks the position and the alignment of the previously defined label. The parameters are defined by the user. Afterwards the inspection can be applied immediately to the production process.

HEMCO ModuLab is a custom-designed room enclosure with control systems that meet a variety of environmental and class clean requirements. ModuLab is a choice for industrial applications such as Powder Coating, Food Processing, Seed Production, Mining, and Bulk Solids Handling.

The series is comprised of 18 models offering 9-36 / 18-75 / 43-160 V input ranges and outputs of 5 / 12 / 15 / 24 / ±12 / ±15 VDC.

A tricolor version is available as an alternative, combining the colors, red, yellow and green in the one beacon. The beacon can be actuated via either acable connection or a pre-assembled M12 plug – for plug & play