Industry Products

The 4200 transmitter provides a viable migration path where Coriolis meters were previously not practical as a 2-wire solution, either due to restrictions on running additional wiring or a lack of power sources. The unit is also a solution for greenfield applications.

AVE360 pre-silicon autonomous validation environment is a program established to enable and accelerate the development of autonomous vehicle platforms. PAVE360 provides an environment for multi-supplier collaboration across the automotive ecosystem for the development of automotive chips.

The propriety engineered traction fluid with a coefficient of friction of 0.1 to 0.12 transmits torque between the four driving and driven elements. The traction fluid continuously changes from liquid-to-solid-to-liquid in the microscopic spaces between the driving and driven elements.

DPI – A Framework for Accelerating your Development of FDT DTMs. Reduces time to market, common solution for FDI UIP and FDT/DTM, and reduces overall cost of development and maintenance.

Get more from your HART devices with our NEW I/O DTMs

PeakVue Plus builds on PeakVue technology that filters vibration signals to focus on impacting, a leading indicator of overall asset health on any type of rolling element bearing machine.

E+H device configuration tablet wins product of the year award!

At a width of 37.5 mm including the power supply, the X20CP0420 is designed to be compact. The controller achieves cycle times down to 4 ms and is equipped with 128 MB RAM and 256 MB internal flash memory.

The NSR-KIT-F1 metrology fingertips kit includes three pairs of fingertips that install on the gripper’s factory fingers to enable measurement of a variety of part shapes.

Interactive Cycle Insertion is an icon-based programming method that lets engineers choose and customize cycles or features directly into their G-code program, through the edit screen.

Available in 1.54, 2.13, 2.66, 4.20 and 4.37-inch models, these active-matrix displays include an internal timing controller (Tcon), which minimizes the amount of programming and peripheral circuitry required.

The posichron PCFP25 profile was designed especially to suite limited space applications such as crane outriggers.

At 1.5 x 1 x 0.6 inches (38 x 25 x 16 mm) in size, the footprint of the drive is approximately the same as two standard postage stamps. In other words, four of these drives can fit on a standard business card.

This Ethernet interface is a joint development of HIROSE and HARTING. The adapter allows the DSX Series to connect to cabling systems employing the ix Industrial connector for the purposes of pre-startup verification and troubleshooting.

Mencom offers a range of interconnection solutions for the railway and mass transit industry.

With a contact rating up to 0.1 amp as first release, the products deliver a repeatable action, making them suitable for detection applications, such as temperature, and pressure switching in motorized equipment, sump pumps thermostatic controls and air conditioners.

Safety laser scanners enable humans and machines to work safely alongside one another in industrial environments by reliably protecting stationary and mobile applications.

These M12 interconnects were designed for factory automation, industrial control, test equipment, I/O connectivity, sensors and actuators, or any connectivity application where a screw down interface is necessary.

The certification by third party TÜV Rheinland confirms that the controller meets the global standard’s cybersecurity requirements. The controller achieved compliance with the addition of security features to its firmware.

The BB-400 NeuronEdge combines Brainboxes IO and serial connectivity with a range of network connections to allow data to flow to the application of choice. The design uses a Raspberry Pi Compute module and an Arduino to provide edge processing.

The FAC-S Analog Output Sensor and FAC-R Frequency to Analog Converter also offer Bluetooth connectivity and analog output options when interfacing with AW-Lake Flow Meters and other instrumentation.

PMPlanR is a standalone Preventative Maintenance Planning Software Application. PMPlanR allows users to “Build Your Plant”. Each Plant consists of Areas, Machines and Assets.

Devices featuring this service are designed to ensure compatibility with Microsoft Azure IoT, and make deployment of AIoT and cloud-connected networks easier to set up and use.

The software delivers production information from any FactoryTalk application to operators wherever they are in a facility. Operators can customize the way information is delivered to any device (fixed or mobile), user or location.

Geared towards end users in crane and material handling applications, the regenerated energy from one VFD in a lift application is used by another VFD to drive other motors in the system.

The T840 offers a display and an integrated viewfinder to help electrical utility, plant managers, and other thermography professionals find and diagnose failing components in any lighting conditions.

ADLINK’s 1U Edge Computing platform MECS-6110 provides all I/O front access, dust prevention, operation temperature for supports of telecom feature, installation environment restrictions, capability of system architecture evolution, and dual full-height full-length (FHFL) PCIe expansion slots reserved for access to acceleration hardware (GPU/FGPA).

The design of the CRASH-CAL system integrates MB’s own Model CAL25AB air bearing shaker, together with its Model 407-8X multi-channel signal conditioner; MB 500VI power amplifier; and Win475 CRASH-CAL software, facilitating the simultaneous calibrations of up to eight piezoresistive accelerometers

The number of cycles of certain components during production are determined via RFID, thus creating an overview of the current plant utilization. The cloud-based RFID solution makes it possible to monitor a range of production equipment that requires maintenance.

The AIPW pre-scans the root opening (gap) using a 2D laser, then uses the data to generate the robot path and welding parameters. Gap variations are compensated for with changes in oscillation, torch position, travel speed and welding conditions. Th